Code to wait until something is finished before starting another?

Similar Questions

• Downloaded 4 fonts on my computer and all the files unpacked, but says I have to wait until Windows is finished with the files

  I downloaded 4 fonts on my computer and all of the decompressed files. However, my computer telling me I have to wait until Windows is finished with the files. I made sure all Windows programs are disabled, but he still repeats the message. Why is it so?

  Hi Clarissa Tan.

  1. What is the complete message you receive?
  2. Which site did you download the fonts on the computer?

  Method 1

  I suggest you to use the link below to download new fonts on the computer and check if it helps.

  To add a new font to your computer

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/windows_fonts_addnew.mspx?mfr=true

  Download new fonts

  http://www.Microsoft.com/typography/fonts/

  Method 2

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you set up the computer in a clean boot state and try to install new fonts, check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

• Please wait until the installer finishes determining your disk space requirements

  I have a windows Xp, Im trying to download Windows live sign in assistant. It seems to be stuck in (Please wait until the installer finishes determining your disk space requirements) I'm not quite sure what to do, Ive has been looking for an awnser for quite awhile. Im trying to download a game called also age of empires online. If there is a way I can by pass this dl all together that would be even better. I just went to re - install the program and this is the link ( http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=15106 ), it is not windows 7 but I'm not sure if it would work for my windows Xp. This link pop when I run the games for windows marketplace... Thanks - Matt...

  Well, I had it works for me without re doing not, but by going to my downloads and put back on the download I re install a couple of times and the same results, once I started it of my downloads, it worked like a charm! Hope this helps someone out there.

• If statement to unload any swf active before starting another

  I have a video player of sorts that plays one of the 6 videos based on the user clicks on the buttons. Everything works perfectly if the user selects the button 'stop' on the video control bar before moving on to another video. But, if the current video is left to play starting another video, the audio from the first video continues on overlapping each other.

  I know that it is a problem common in AS3 and should be easily remedied with unloadAndStop() but I can't get my if statement to work right. I work with march_mc and august_mc videos to understand this. Basically, I'm trying to tell Flash that if march_mc is playing when august_mc is requested to unload march_mc then play august_mc. This works if march_mc played in a first time, but if I try to play august_mc when march_mc is not playing it returns a null object error. In my head, her if statement should avoid this but I'm doing something wrong...

  Here is my code that is located on august_mc:

  augustPlay_btn.addEventListener(MouseEvent.CLICK, startAugust);
       function startAugust(event:MouseEvent):void{
            if (MovieClip(root).march_mc.currentLoaded == MovieClip(root).march_mc.totalLoaded)
            {
                 MovieClip(root).march_mc.marchImgLoader.unloadAndStop(); //this is the line causing the null object reference
                 augustImgLoader.load(augustImgRequest);
                 gotoAndStop(2);
            }
            else
            {
                 augustImgLoader.load(augustImgRequest);
                 gotoAndStop(2);
            }
       }
  
  

  Any help is very appreciated!

  Thanks in advance,

  Jessica

  How to block access a try/catch:

  augustPlay_btn.addEventListener (MouseEvent.CLICK, startAugust);

  function startAugust(event:MouseEvent):void

  {

  If (MovieClip (root).march_mc.currentLoaded == MovieClip (root).march_mc.totalLoaded) / / im guessing it is also "true" If the two equal to zero

  {

  try {MovieClip (root).march_mc.marchImgLoader.unloadAndStop () ;} {catch (e)}

  augustImgLoader.load (augustImgRequest);

  gotoAndStop (2);

  }

  on the other

  {

  augustImgLoader.load (augustImgRequest);

  gotoAndStop (2);

  }

  }

  HTH,

  -Ted

• Exec.vi "Wait until completion" system uses a lot of CPU. Help

  I am writing an application that calls parallel instances of an external program. I have the code of work to run the EXE file with the Exec.vi system. When the completion up to wait entry is set to true on Exec.vi LabVIEW system uses all my CPU. The EXE I am running is an exe of low intensity, and if I don't wait until completion LabVIEW has no high CPU usage. It would be nice, but I have the code which needs the EXE to finish before moving. I'm doing something wrong? I could not find this behavior as a known issue, so I would like a mental health to make sure I'm not stupid fouls. I have attached a demo that recreates the question. The VI called the EXE with lance Notepad and then updates the text in Notepad. I am attaching the source code of the demo EXE as well.

  Brandon.Baxter wrote:

  Thanks Bob

  LabVIEW sequentially launches 20 cases of "Idel_EXE.exe" who are getting a Notepad and returns information.

  This description is exactly what asynchronous call and collect is supposed to manage.  'Call' treats only the controls, move the VI 'in' data you call.  The "wait on asynchronous Call" does the rest - if the called VI has done and wants to pass 'out' data, this function provides the values.  As I have indicated, if the called VI is still ongoing, wait for asynchronous can expire, return an error (which you can use as a signal 'Wait a little bit longer').

  Bob Schor

• 15 + minute delay before start-up

  Hey people,

  My Info: I am running Vista Ultimate 32 bit on a Lenovo ThinkPad X 200 Tablet machine.

  My problem: it is pretty well summed up by the title to my son: restart or turn on my computer, the power light comes on, but wait at least 15 minutes before starting the system. Once it starts booting, everything works smoothly.

  It all started when I used the blue ThinkVantage button on my ThinkPad (Lenovo users will know what I mean, it's basically Lenovo system maintenance tool) to download updates for my machine, including some BIOS stuff.  I'm suspicious that this has to do with my BIOS, but I wanted to hear what you guys have to say before I start shooting around my BIOS.

  I could really use some help here, I'm more frustrated.

  Thanks in advance for any help you can give me, and I apologize if this isn't the right place to put this.  I tried Lenovo support forums and got no help, and I really don't want to spend the money it will take to Geek Squad or similar to fix.

  Thank you

  Chris

  Finally, I solved the problem.

  As it turns out, what I thought was a problem unrelated to finish up being the root for this cause.

  After booting, I get the warning: "there was a problem connecting to the module of TPM (safety device) on this computer.  It is possible that the software anti-virus or firewall is blocking the connection.  A missing or disabled device driver can also cause this problem.  Please refer to the online documentation for more information. »

  It turned out that when I've updated my BIOS, one of the security programs that initialize during startup until was not updated correctly.

  Fix: go to the Lenovo Web site and update the Client Security Solution.  This one worked for me: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-69959.

• Message "Please wait until the current program is finished uninstalling" or that when the uninstall a program

  Original title: Uninstalling questions

  The problem is when I try to uninstall any program I get a pop up message saying "Please wait until the current program is finished uninstalling" or that did not uninstall or change a program for months! Any ideas would be appreciated

  Hi Martin,

  This error message is related to the windows service installed on the computer.

  Before you begin to solve the problem, I recommend to restart the computer and verify if you are able to run the program.

  If the problem persists, I suggest you follow the provided methods to solve the problem.

  Method 1

  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

  (a) click on Start Menu

  (b) type msiexec /unreg , and then press ENTER.

  (c) click on Start Menu

  (d) type msiexec/regserver , and then press ENTER.

  Method 2

  If the previous step fails, check if it has all the facilities waiting on the computer using the registry.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see the link below.

  Back up the registry

  For Vista: Back up the registry:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Empty registry key "in progress"
   
  Check the following registry key:

  HKLM\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress

  Empty/rename "PendingFileRenameOperations" registry key

  Check the following registry key:

  HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\PendingFileRenameOperations

  Hope this helps; Please get back to us with the results.

• When I try to "uninstall or change" a program of this message permanently appears 'Please wait until that the current program is finished uninstalling or change'

  I can't uninstall anything. It is permanently blocked with the message "Please wait until that the current program is finished uninstalling or changing" appearing if I try to uninstall any program.

  Hello

  Try the methods provided below and check if the problem persists.
  

  Method 1

  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

  (a) click on Start Menu

  (b) type msiexec /unreg , and then press ENTER.

  (c) click on Start Menu

  (d) type msiexec/regserver , and then press ENTER.

  Method 2

  If the previous step fails, check if it has all the facilities waiting on the computer using the registry.

  Important  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see the link below.

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Empty registry key "InProgress".
   
  Check the following registry key:

  HKLM\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress

  Empty/rename "PendingFileRenameOperations" registry key
   
  Check the following registry key:

  HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\PendingFileRenameOperations

• "Lexmark S600 Series is currently in use. Wait until the printer has finished printing and then uninstall. »

  Original title: Lexmark printer

  Hello

  Thank you for helping me to get my laptop working again - after contacting the Microsoft Community, Microsoft and my ISP, my email seems to work so I can get all my incoming messages.

  But I'm still having a problem printing.  I tried to uninstall the Lexmark S605 and I get the message error "series Lexmark S600 is currently in use.  Wait until the printer has finished printing and then uninstall. "I get this message even if the printer is turned off and unplugged.

  Before I tried to uninstall, I tried to update the drivers from the Lexmark site and it says the update was successful, but nothing prints.  Printer is no longer supported by Lexmark.  Wireless connects, but I have also tried to make it work using the USB connection.

  Printer print wireless from office, but not my laptop.

  Does anyone have an idea on how to uninstall the Lexmark program?

  Thank you

  Agnes

  Restart your computer and check the queue to printer in the Notification area, as suggested.

  Click on the printer

  Cancel all Documents

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

• Should I wait until iTunes game done on Mac before turning on my iPhone?

  Should I wait until iTunes game is made download and correspondent of iTunes on Mac before attempting to turn on iCloud music library on my iPhone?

  I had a horrible experience and cancelled my subscription Match because it made my iPhone go crazy and brought me to wipe and treat Apple (legal dept) customer relations in order to compensate me financially for the bug that downloads songs on cell when it is not supposed to and draining my battery in a few hours and cause invites every 10 seconds (without exaggeration).

  I was wondering if I should wait 2 weeks first for my collection has been completely downloaded first. It would be too iOS 9. In any case...

  Hello

  Yes. Once match / download process is complete, you can then activate the game on your phone but there is no need to wait two weeks. I suggest that you add the iCloud status column to song in your iTunes library. This will tell you which corresponded, downloaded, purchased, ineligible, duplicate or pending.

  Jim

• uninstalled applications, received message: Please wait until the current program has finished uninstalling or one. After several reboots, still same message.

  Original title: 2 numbers do not know if they are related

  I have 2 questions and I don't know if they are related. Several days ago I was doing some cleaning and uninstalling programs to free up space. I don't know what I started with, but it seemed to go ok. However, after all that I've tried to uninstall gave me the message: Please wait until the current program has finished uninstalling or one. I rebooted the computer more than once during this period, but it still says that.

  Then my internet explore has stopped working just for 2 or 3 days. I've been using google chrome to access things, but it is rather slow.
  I ran repeated virus and malware scans my norton security and the microsoft Web site, and all said I am clean.

  Yes, it's windows 7 I appreciate the suggestions, but the problem was that he wouldn't LET me not uninstall anything. He gave me the waiting message please do anything, and he's not missing if I stopped and restarted. Finally, I gave up. I saved my files to my external hardrive and just do a full recovery of the computer. He solved the problem of installed programs and the internet problem explore both, although I hoped it would avoid going that drastic.

• I get the message please wait until the current program is finished gel or one

  I get the message please, wait until the current program is finished gel or be changed... trying to delete a program and have restarted and did a system restore nothing has fixed the problem...

  Hello

  try using the free program revo to remove a stubborn program

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

• I got following message from the installation program Adobe - other instances of running Applications Adobe Manager that must be closed before you install this product. Please close or wait until they end. Please indicate how can I resolve the issue?

  I got following message from the installation program Adobe - other instances of running Applications Adobe Manager that must be closed before you install this product. Please close or wait until they end. Please indicate how can I resolve the issue?

  Please check if this helps https://helpx.adobe.com/creative-suite/kb/error-instance-updater-running-cs5.html

  Concerning

  Stéphane

• Update error, bridge U44M1P36 another instance of Setup is running.  Wait until he finished, and then try again.

  I tried, in vain, four times, to constantly update bridge and it brings up the error U441P36, another instance of Setup is running.  Wait until he finished, and then try again.  Thanks for your suggestions for resolution.

  I shut down the computer, and Windows 10 had an update.  I waited for the update of Windows 10 load and then turned the computer back on.  I opened creative cloud and bridge update was available again.  This time the update ran properly, bringing customary dialog regarding making changes to the computer.  The update then installed correctly.  Problem solved.  I still have no idea what the underlying problem has been...

• 'Please wait until that the current program is finished uninstalling or change'

  Im trying to uninstall a program and when I click on uninstall it says: "Please wait unti the current program is finshed uninsatlling or that" it says always that what I'm doing.

  Hello

  This question has been answered here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/error-when-uninstall-a-program-Please-wait-until/9a32c111-F3B7-4079-BB4A-f781fa8f12ee

  I think you should try:

  #1 restart your system and try again.

  #2 check that the software is not running in the background.

  #3 try a 3rd party uninstaller but be careful because you don't have much control over how a 3rd party uninstaller effectively uninstalls - sometimes they leave "debris" that can affect future use.

  Kind regards

  Joel