Codes error startup 0211 and 0162

Similar Questions

• Windows Update cannot install Office SP2 and KB973924; codes error 78(f) and 643

  Hello

  I'm currently under Windows 7 64 bit which has been updated to XP in January this year.

  Since July, Windows 7 update tried to install following updates without success:

  1) the 2007 Microsoft Office Suite Service Pack 2 (SP1/SP2) - error code generated 78(f)

  (2) security Update for Microsoft Visual C++ 2008 Redistributable Package (KB973924) - 643 generated error code

  Windows Update tried to install these several times but without success.

  Also, I tried to install iTunes and get the following error:

  "An error occurred during the installation of assembly"Microsoft.VC80.CRT, version = "8.0.50727.4053", type = "win32", processorArchitecture, publickeyToken = "1fc8b3b9a1e18e3b" is"x 86".  See Help and Support for more information.  HRESULT: 0 X 80070002. »

  I tried many internet research to try and find a solution to these problems but have had no success.  I tried the following:

  (1) re-intsalled .net framework 4

  (2) run the System File Checker that could not so I tried my windows disk, but it could not start because the message says that two updates were waiting to be installed

  Now, I'm really worried that I have a big problem with Windows.

  Well, any help that you can give to avoid reinstalling my system would be appreiated.

  Thank you very much

  Thanks for your help Irfan H and PA bear but unfortunately none of the above suggestions has solved my problem and I couldn't find another solution on the internet that worked.

  Finally, I had to do a clean install of my system using an image of my hard drive that I created during my first installation of windows 7.  Now, everything seems to work properly and installing updates without problems.

  Thanks again.

• Codes error C 64 and 66; Cannot install Net Framework 4 updates

  NET Framework 4.0 does not exist in my programs.  Attempts to install it are filled with error code 643.  At this point, I'm stumped.

  Hello Jerry,.

  I was looking on this thread and saw that the fix has not solved this problem.

  I wanted to see if you tried using the stand-alone Installer on the advice of Naman.

  Let us know.

  Best regards

  Matthew_Ha

• Code error WinDef 8050800c and system restore Error 80070002 are related

  Hi all

  During the last weeks of twoo many discussion happened for WinDef - and MSE-error 8050800c.  The problem known inside this WInDef cannot scan or update at required intervals, created havoc and thousands of users are complaining about and at the same time try to find a solution.

  I am one of those users.  The question is not only that MS has not come up with a fix, but also this WinDef exhibits strange behavior.  Strange in a sense that one day working and the other is not.

  At the same time, people started having problems with the system restore in Vista, where everything is working correctly, except for the fact that the system will be back on the date indicated, coming with a notification "unknown error" and an error code 80070002.

  I am one of those users too.  Looking around the solutions both almost simultaneously and recent issues that hit my pc, I found that the solutions proposed by the MS people are circling around the keys to register ProfileImage.

  These questions are treated as separate issues, I think they are related.  For example, in this forum, regarding the error of WinDef a solution has been proposed recently around the ProfileImage.

  But a similar thing has been proposed by MS team, study the problems of SR points.

  Please see these links.

  WinDef: http://social.answers.microsoft.com/Forums/en-US/msescan/thread/a5810b32-5470-46aa-8be4-634f06064131

  System Restore/backup: http://blogs.technet.com/filecab/archive/2008/03/12/common-causes-and-solutions-to-backup-system-restore-and-complete-pc-backup-problems-updated.aspx

  I appreciate your point of view and a possible solution to these two problems please.  Note that I already checked my ProfileImage values.  Well, all are created, except for a key that is where it seems completely empty.

  Thank you very much in advance.

  TrDo.

  Hello

  Thanks for the information; your efforts are very much appreciated.

  This happens when the Windows Vista Restore Wizard cannot access the files due to access denied or restore points missing or damaged.

  To restore the computer to a previous state, make sure that there are no corrupt restore points and backup Windows and Volume shadow copy services are also running.

  Connect to the computer as an administrator and follow these steps.
  1. start Windows Backup and Volume Shadow Copy services.
  a. Click Start, type services.msc and press to enter.
  b. search for Windows Backup and Volume Shadow Copy services and start them.
  2 start the computer in safe mode and open the system restore and check the result.
  Safe mode: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode

  I hope this helps.

  Kind regards
  Syed V
  Answers from Microsoft supports the engineer.

• Code error BSOD 50 and 109

  Hello, for about a year now I always get constant bluescreens, I tried the factory reset but I get these two error codes. I don't know what to do, I downloaded the dump on skydrive files and really want this fixed a problem.

  DWB

  It is not conclusive.  I would like to run the Driver Verifier to find the faulty driver

  
  

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  Driver Verifier (for full instructions, see our wiki here)

  Co-written by JMH3143

  

• Windows update code error 00000646 KB960003 and others. did a scan and found that I have some corrupted files that cannot be fixed in the C:\windows\Logs\CBS\CBS. JOURNAL, I need help fixing problems

  error message 00000646. tried repair, cleaning of files and did the sfc/scannow

  Have you seen this sticky yet? -Online http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My iMac news, sharing and permissions had a name 'wheel' that I didn't put there. When I try to delete it, I get code error-8076. Any thoughts?

  My iMac news, sharing and permissions has a name 'wheel' that I didn't put there. When I try to delete it, I get code error-8076. Any thoughts?

  It is a part of the OS and nothing to worry about.

  https://en.Wikipedia.org/wiki/wheel _ (Unix_term)

• Windows 7 - updates errors - Code A 80071, 91 and Code 80070643

  Windows 7 - updates errors - Code A 80071, 91 and Code 80070643

  happysail,

  see if this sugesstion can help you:

  http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?&lang=en&cr=US&guid=&sloc=en-us&dg=microsoft.public.windowsupdate&p=1&tid=958b1d34-138d-4cc2-880f-36cd5cbc4a79&mid=958b1d34-138d-4cc2-880f-36cd5cbc4a79>

  Please let us know if that helps.

  hope this helps, if it's waiting for more answers, please.

• Updates Windows 7, to get codes error '646' and 'dt000 '.

  When you try to install the updates, the error code 646 occurs. After the patches recommended and routine brings me to Microsoft with potential charges or here for the real experts. Can anyone help?

  Code error '0 x 80070646', '646', or '1606' when you try to install the Office updates

  http://support.Microsoft.com/kb/2258121 releasing It Easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• I can not installed any program, not even place dating 8007000 b error code from my windows, and for windows live menssenger error is Microsoft.VC 80.le CRT version 8.0.50727.42 _

  I can not installed any program, not even place dating 8007000 b error code from my windows, and for windows live menssenger error is Microsoft.VC 80.le CRT version 8.0.50727.42

  Do a system restore:
  http://www.SevenForums.com/tutorials/700-system-restore.html

  Try to repair:
  http://www.SevenForums.com/tutorials/3413-repair-install.html

• Error code: 0 x 80246008 error Code: 0 x 80246007, error Code: 0 x 80200010 and error Code: 0 x 80246002 can not install updates in the Windows XP computer.

  Original title: window update problem.

  Error code: 80246008 error Code 0 x: 0 x 80246007, error Code: 0 x 80200010 and error Code: 0 x 80246002 what its means? And how to solve this problem to?

  (merged thread)

  Hello

  Did you do any hardware changes or software on your computer before this problem?

  You can follow these links & check if it helps:

  You may receive an error message that contains the "0x8DDD0018" code or the code '0 x 80246008' when you try to download updates from the Microsoft Windows Update Web site or from the Microsoft Update Website.

  When you try to install the updates on the Windows Update Web site or the Microsoft Update Web site, you may receive a "0 x 80246007" error code

  You receive the error 0 x 80200010 when you try to use the Windows Update Web site or the Microsoft Update Web site to install the updates

  You receive an error code "0 x 80246002" when you use Windows Update or Microsoft Update Web sites to install updates

  Hope the helps of information.

• Get codes error 0 x 8246007 and 0x8007F0F4 when trying to install KB02686509

  This is a repost of a persistent problem, I did everything that was suggested, and all I ask is that someone looks at the code to update security and how it is written because it lacks a few prerequsites for install it correctly.

  Hello SassesGrannie02,

  I suggest that you add your name to the long list of people who live the same problem with this update, in the link below. you are likely a better chance to get is resolved. I hope this helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/kb2686509-repeatedly-fails-with-error-code/0deeacb6-115C-419D-AC37-03ff8927b79c

  Note: If you scroll the messages, you will find Susan Bradleys message and an e-mail address where you can contact her.

• I have an 0xC0070678 error code, I uninstalled AVG and reinstalled and now get the error message internal General. MSI engine failed to install the product. Help

  I have an 0xC0070678 error code, I uninstalled AVG and reinstalled and now get the error message internal General. MSI engine failed to install the product.  Now I have no anti virus.help please

  Hello

  It is a specific error of the AVG software. There are number of threads on the same topic on the forums of AVG.
  Reference:
  http://forums.Avg.com/us-en/AVG-free-forum-search?sec=search&Act=show&ID=0&Search=1&type=posts&user_nick=Davo1330&subthemes=1

  http://forums.Avg.com/au-en/AVG-free-forum-search?sec=search&Act=show&ID=0&Search=1&type=posts&user_nick=pcroft&subthemes=1

  See also:
  If you have problem install/uninstall/upgrade to update AVG: AVG 2011 + 9.0 + 8.x uninstall / re-install Instructions
  http://forums.Avg.com/ww-en/AVG-Free-Forum?sec=thread&Act=show&ID=110317

  I hope this helps.

• Vista SP1 - error startup! 0xc0190002! 328/88027 ($$ _boot_pcat_ja - jp_d98fca962b0246de.cdf - ms). I can not get this error to go away and start my PC now. Help, please!

  Vista SP1 - error startup! 0xc0190002! 328/88027 ($$ _boot_pcat_ja - jp_d98fca962b0246de.cdf - ms).  I can not get this error to go away and start my PC now.  Help, please!

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or try this Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/threads

  Restore the previous settings, repair facilities, and retrieve data.

  See you soon.

  Mick Murphy - Microsoft partner

• My phone displays an error message on the startup file and it mentions the installation media, how can I solve this problem?

  Separated from this thread.

  My phone displays an error message on the startup file and it mentions the installation media, how can I solve this problem?

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are several methods to reinstall Vista.

  This can help you (download files and make your own DVDs):

  http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

  And here are instructions on how to burn ISO disk images:

  http://www.SnapFiles.com/get/isorecorder.html

  The download links and information on how to make the ISO file, and then create the Setup DVD above are at this link:

  "How to download a Vista ISO and create a Setup DVD or USB"

  http://www.Vistax64.com/tutorials/301852-Vista-ISO-download-create-installation-DVD-USB.html

  "How to create a USB of Vista Installation key '

  http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

  ___________________________________

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  ___________________________________

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Them or us ask the right sequence of key.

  ___________________________________

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.