Column data reading according to the number of lines

Similar Questions

• How can I fix the height of the datagrid advance according to the number of lines.

  Hello

  I have a datagrid move with a few lines in it. But the height of the grid is higher than the number of lines... How can I fix the height number of lines. That is, if the number of lines is 5 then the height shall be determined in accordance with that.

  Can someone please tell me a solution for this.

  Thank you

  Suma.

  Set rowCount is equal to the length of the dataProvider:

  [Bindable]
  private var dpFlat:ArrayCollection = new ArrayCollection([
    {Region:"Southwest", Territory:"Arizona",
        Territory_Rep:"Barbara Jennings", Actual:38865, Estimate:40000},
    {Region:"Southwest", Territory:"Arizona",
        Territory_Rep:"Dana Binn", Actual:29885, Estimate:30000},
    {Region:"Southwest", Territory:"Central California",
        Territory_Rep:"Joe Smith", Actual:29134, Estimate:30000},
    {Region:"Southwest", Territory:"Nevada",
        Territory_Rep:"Bethany Pittman", Actual:52888, Estimate:45000},
    {Region:"Southwest", Territory:"Northern California",
        Territory_Rep:"Lauren Ipsum", Actual:38805, Estimate:40000},
    {Region:"Southwest", Territory:"Northern California",
        Territory_Rep:"T.R. Smith", Actual:55498, Estimate:40000},
    {Region:"Southwest", Territory:"Southern California",
        Territory_Rep:"Alice Treu", Actual:44985, Estimate:45000},
    {Region:"Southwest", Territory:"Southern California",
        Territory_Rep:"Jane Grove", Actual:44913, Estimate:45000}
  ]);
  

  If this post answers your question or assistance, please mark it as such. Thank you!

  http://www.stardustsystems.com
  Adobe Flex development and Support Services

• Update from the field with consecutive number according to the number of entries

  Hello
  
  I need to update a field with a consecutive number according to the number of lines where the entries are made which go hand in hand. What it means:
  I have
  SYSAUSPR AREA SYSGEBIET TYP RANG
  182925 600003 4 1 PERSON
  1 600004 4 1 PERSON
  2 600004 4 1 PERSON
  3 600004 4 1 PERSON
  17 600004 4 1 PERSON
  18 600022 4 1 PERSON
  182864 600079 4 1 PERSON
  184082 600092 4 1 PERSON
  182774 600143 4 1 PERSON
  PERSON 183237 600165 4 1
  NO 7 600169 4 1
  8 600169 4 1 PEOPLE
  9 600169 4 1 PERSON
  12 600169 4 1 PEOPLE
  14 600169 4 1 PERSON
  184309 600179 4 1 PERSON
  23 600182 4 1 PERSON
  
  I need to change column "RANK" of 1 the number of records that have the same id in the "SYSGEBIET" column (from this example with 600) so that it looks like
  
  SYSAUSPR AREA SYSGEBIET TYP RANG
  182925 600003 4 1 PERSON
  1. NOBODY 600004 4 * 1 *.
  2. PERSON 600004 4 * 2 *.
  3. PERSON 600004 4 * 3 *.
  17. NO 600004 4 * 4 *.
  18. NO 600022 4 * 1 *.
  
  Does anyone has an idea how to solve this problem in an update statement?
  Thanks for your help
  Best regards
  Carsten

  SQL> select  *
    2    from  tbl
    3  /
  
    SYSAUSPR GEBIET  SYSGEBIET        TYP       RANG
  ---------- ------ ---------- ---------- ----------
           1 PERSON     600004          4          1
           2 PERSON     600004          4          1
           3 PERSON     600004          4          1
          17 PERSON     600004          4          1
          18 PERSON     600022          4          1
      182864 PERSON     600079          4          1
      184082 PERSON     600092          4          1
      182774 PERSON     600143          4          1
      183237 PERSON     600165          4          1
           7 PERSON     600169          4          1
           8 PERSON     600169          4          1
  
    SYSAUSPR GEBIET  SYSGEBIET        TYP       RANG
  ---------- ------ ---------- ---------- ----------
           9 PERSON     600169          4          1
          12 PERSON     600169          4          1
          14 PERSON     600169          4          1
      184309 PERSON     600179          4          1
          23 PERSON     600182          4          1
  
  16 rows selected.
  
  merge
    into tbl t
    using (
           select  sysgebiet,
                   sysauspr,
                   row_number() over(partition by sysgebiet order by sysauspr) rang
             from  tbl
             where sysgebiet like '600%'
          ) u
      on (
              u.sysgebiet = t.sysgebiet
          and
              u.sysauspr = t.sysauspr
         )
    when matched
      then update set t.rang = u.rang
  /
  
  16 rows merged.
  
  SQL> select  *
    2    from  tbl
    3  /
  
    SYSAUSPR GEBIET  SYSGEBIET        TYP       RANG
  ---------- ------ ---------- ---------- ----------
           1 PERSON     600004          4          1
           2 PERSON     600004          4          2
           3 PERSON     600004          4          3
          17 PERSON     600004          4          4
          18 PERSON     600022          4          1
      182864 PERSON     600079          4          1
      184082 PERSON     600092          4          1
      182774 PERSON     600143          4          1
      183237 PERSON     600165          4          1
           7 PERSON     600169          4          1
           8 PERSON     600169          4          2
  
    SYSAUSPR GEBIET  SYSGEBIET        TYP       RANG
  ---------- ------ ---------- ---------- ----------
           9 PERSON     600169          4          3
          12 PERSON     600169          4          4
          14 PERSON     600169          4          5
      184309 PERSON     600179          4          1
          23 PERSON     600182          4          1
  
  16 rows selected.
  
  SQL> 
  

  SY.

• Problems with sorting of columns and the number of lines in the report

  Hello
  
  I'm having a problem with sorting of columns and the number of lines displayed in a report.
  
  This report displays the data correct, but if I try to sort on a column when I click on the column heading in the report returns no line... I need to click on the "go" button to refresh the report (with the column sorted now) in to display the data.
  
  Similarly, I display only 15 lines per page. If I try to view the lines 16-30, 31-45, etc., that it returns no line until I click on the 'go' button to refresh again.
  
  Has anyone else had (and overcome) the same problem?
  
  Thank you
  
  Joseph

  Joseph,

  2 questions:

  1) are you using the elements referenced by the report page to filter etc.. ? If so, you're failing values of these when the loading of the page?
  (2) are you using PPR page through the results?

  If so, it could be a problem with the different types of session state, as Anton Nielsen blogged about here:
  http://c2anton.blogspot.com/2008/12/Oracle-Application-Express-Apex-three.html

  If so, you can use calculations or processes to set element values in session state persistent during page rendering, as Anton mentions. In this way, when you use PPR page values will be available in session state and your report should work fine.

  Anthony.

• Problem with the number of lines in the channel

  Dear community LabView,

  I'm relatively new to labview and I came across a problem that (I assume) can easily be resolved with your help.

  I need to create a digital signal to trigger a camera, but I have a problem with the configuration of my lines or exit lanes. I would not use that line output to trigger the camera. (I use a card NI PCIe-6353). LabVIEW is telling me that the number of lines in the channel does not have the number of rows of data:

  Possible reasons:

  Specified read or write operation failed because the number of rows in the data of a string is not the lines in the channel.

  If you use the digital waveform data type, make sure that the number of lines in the digital waveforms is the number of lines in the channel. If you are using Boolean data, make sure that the dimension of the array for the rows of the data is the number of lines in the channel.

  Number of lines in the channel: 1
  Number of data lines: 2

  Task name: _unnamedTask<11>

  How and why the number of data rows is connected to the resolution of my analog digital converter?

  I would appreciate your help! Labview code and a screenshot attached.

  Thank you

  Beff

  I got it to work by changing the "data format" "binary not signed" OR by plugging is not the "offset" for the Square Wave VI.  I think that the default "offset binary" data format works correctly if there is a negative value.

• BI Publisher - how to display the number of lines displayed at the bottom of the table on each page

  Hello

  We are the conversion reports Actuate BEEP and not able to understand how to view "Accum.Total = < n >" at the bottom of each page. In the attached report to operate it, "Accum.Total = < n >" must be displayed at the bottom of each page where < n > is the number of lines displayed on the current page and previous page.
  
  For example, if there are 10 rows in the result set, if the 1st page displays 4 rows, 2nd page displays 3 rows and 3rd page is 3 lines and then Accum.Total = 4 on page 1, Accum.Total = 7 on page 2 and Accum.Total = 10 on page 3.
  
  Note that we use the property table "allow the lines to break Pages = False" as we do not want a specific line can be split across pages.
  
  I enclose a sample of report actuate, rtf, BEEP and XML report for testing file.
  
  Approach used so far-
  
  1 > I tried to put the counter in the footer, but it seems that only the fields that come directly from the IC can be used on the header/footer. No matter what form text field or variables defined in the report.
  
  2 > I used approach given in the link below. Using this approach, I am able to view a coded value hard at the bottom of every page (just below the table) but his does not work for the variable (in my case the counter c1).
  
  https://blogs.oracle.com/xmlpublisher/entry/continued
  
  3 > on Google, I found a few articles on the page break conditionally as display only certain numbers on a page or the page by section break but in our case, its dynamics and its number of lines to display on a page is driven by data, so I could not think of a certain condition to use in "Condition." ": If" for use as a page break.
  
  Thank you

  Richa
  

  Watch see the-Report

  http://docs.Oracle.com/CD/E28280_01/bi.1111/e22254/create_rtf_tmpl.htm#do_bf_cf

  Download the https://blogs.oracle.com/xmlpublisher/entry/continued sample

  Add

  <>

  name = "contd_footer".

  format = "99G999G999" / >

  After the field "Footer."

  If need to use a footer to display the meter then and sous-modèle with code above and call it in footer

• Is it possible to change the number of lines to display in the query of the adf?

  Hello

  is it possible to change the number of lines that appear in a query of the adf that is similar to a form of the adf?

  I need about 5 lines per column rather than display all the fields in a single column to display? Thank you.

  Hello

  What do you mean that it didn't work? Attributes of how you have in the Panel of the query? Maybe you have fewer number than the combination or lines and the properties of the argument maxColumns attributes.

  Try again with

  and see if you are able to get everything under a single column. If you get, play with these two properties to get the desired result.

  Arun-

• How to count the number or lines in the file

  Hi Experts,
  
  I'm file as source and Oracle as target. My folder that contains some data that will load the target.
  My requirement is that I want to count the number of lines that contains my folder. Please help me how to count the total number of lines in the file.
  
  
  THX,
  Sara.

  Hi Sahaveda,

  Now, I tried and it works.

  Sorry my mistake again.

  I created HR. ETL_FILE_LOG as below:

  CREATE THE TABLE HR. ETL_FILE_LOG (numero_fichier varchar2 (10))

  Below the code will run without error:

  import java.lang as lang

  import java.sql SQL

  import of java.lang.String

  Import os

  disadvantages is sql. DriverManager.getConnection ("<%=snpRef.getInfo("DEST_JAVA_URL")%>", "<%=snpRef.getInfo("DEST_USER_NAME")%>", "<%=snpRef.getInfo("DEST_PASS")%>")

  dblinks = cons.createStatement)

  File1 = Open ('c:\EMP.txt','r')

  Count = 0

  Line = file1. ReadLine()

  all online! ='' :

  Count += 1

  Line = file1. ReadLine()

  File1. Close()

  sqlQuery = "insert into HR. "The values of ETL_FILE_LOG (numero_fichier) (" + str (count) + ' ") '.

  rqQuery = dblinks.execute (sqlQuery)

  jerks. Close()

  Concerning

• How to find the number of lines in the content of the text?

  Hi all

  I have a multi line text element. I want to know the number of lines in a text element? How can I do?

  Note that all lines end with the SHIFT + ENTER.

  Example,

  It is a

  sample.

  After the line there is a there is (SHIFT + ENTER).

  Thanks for any help.

  Whenever the user enters the shift-enter, Photoshop inserts a control [EOT] (end of text) (\x03 or \u0003) character in the string.

  Also, in order to divide the text according to multiple separators in a single call, it is necessary to use a regular expression instead of a string.

  Try replacing:

  var theArray = theText.split("\r");
  

  with:

  var theArray = theText.split(/[\u0003\r]/);
  

  BTW, you can improve performance by explicitly asking the textKey for the current object of the layer property.

  Try using:

     ref.putProperty( charIDToTypeID("Prpr"), stringIDToTypeID("textKey") );
     ref.putEnumerated( charIDToTypeID("Lyr "), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
  

  Instead of:

     ref.putEnumerated( charIDToTypeID("Lyr "), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
  

  HTH...

• the number of lines committed themselves to variable

  Hello
  
  of in plsql I do
  
  insert into t_target (...) select (fields, fields, fields) of sourcetable.
  commit;
  
  
  I want to capture the number of lines committed and assign it to a variable or insert it into a table, I can't count on
  County of table source or t_target because both these tables change through the day / data are inserted and removed those
  tables. is it possible
  
  Thank you

  Declare a variable and assign the number of lines to this variable.

  As...

  insert into t_target (...) select (fiels,fields,fiels) from sourcetable; 
  
   v_count := SQL%ROWCOUNT;
  commit;
  

• apex_application.g_fxx - is there a limit to the number of lines of treatment?

  Hello
  
  is there a limit to the number of lines, I'm processing in a relationship with apex_application.g_fxx?
  
  I have a report with 7000 lines. My pk_row is apex_item.display_and_save(1,pk_id).
  
  When I want to loop through these lines after submit and access with apex_application.g_fxx, I get the error "page not found".
  If I have just 500 lines or 1000, it works.
  
  Please help, it's urgent :-(

  I'm going to guess it's the parameter maxplsqlparameters for your instance of the Apex.

  I had this happens with forms tabular and master / detail where you have a large number of lines or a number high columns resulting in a product that exceeds the value of the parameter (the number of parameters is something like lines * columns more some other small hold there).

  By default, this setting is installed in 2000 (so we had some forms had slightly more than 60 rows and columns 30 - ish which would be run against this on submit.)

  We have increased this setting to 10000 and so far, so good. We have noticed no ill effects of this. We arrived at this functional entry number based on key end users on the largest number of lines they would probably see at some point in the page.

• How to get the number of lines in a region of report

  Hi all
  
  Is there a way to get the number of rows returned in a report region, without issuing an another 'select count (*) from une_table?
  I mean something like the substitution string #ROW_NUM # but for the total of the lines.
  
  Thank you
  
  Pedro.

  http://download.Oracle.com/docs/CD/E17556_01/doc/user.40/e15517/UI.htm#CHDDGGEG

  For parts of classic report, the footer region supports the following substitution strings:

  #ROWS_FETCHED # indicates the number of lines read by the reporting engine Oracle Application Express (the size of the page). You can use these substitution strings to display messages to the user. For example:

  Read #ROWS_FETCHED # #TIMING # seconds lines.

  * #TOTAL_ROWS # displays the total number of rows that satisfy an SQL query used for a report.

  #FIRST_ROW_FETCHED # and #LAST_ROW_FETCHED # show the range of displayed lines. For example:

  Until #FIRST_ROW_FETCHED # by #LAST_ROW_FETCHED # of #ROWS_FETCHED # displayed >

  Van
  Trent

• Script to determine the number of lines of text in a paragraph?

  I'm revisiting a problem I posted here last summer, thanks to all those who have offered help, but I could not sort it out.

  http://forums.Adobe.com/thread/455526?TSTART=0

  What I'm after is a 'search' function to insert in a FindChangeByList.

  Jongware suggested the following - but when inserted in my list, I can't seem to do anything - it does not take a Javascript error.

  app.findTextPreferences = NothingEnum.nothing;
  app.findTextPreferences.appliedParagraphStyle = "Callout_3";
   foundItems = app.activeDocument.findText();
  for (var i=foundItems.length-1; i>=0; i--)
  {
    if (foundItems[i].paragraphs[0].lines == 2)
      foundItems[i].paragraphs[0].appliedParagraphStyle = "Callout_2";
    if (foundItems[i].paragraphs[0].lines == 1)
      foundItems[i].paragraphs[0].appliedParagraphStyle = "Callout_1";
  }
  

  I regularly get a 'word' document on which I run a "FindChangeByList" that cleans and formats the text with a number of GREP/text searches.

  One of the lines of research converts a particluar to the text string to a paragraph style "Callout_3" (the most common legends).

  This style applies to paragraph NET, above and below the line, to create a block/strip of color that says text is reveresed.

  The problem I have, is that the style (due to the rules of paragraph), works well if the paragraph has x 3 lines of text.

  I have updated styles in place for any eventuality - Callout_1 (for the single line of text), Callout_2 (for x 2 lines of text) etc.

  I'm looking for is a script that can count the number of lines in the paragraph (once the "Callout_3" style has been applied) and then change the style accordingly the number of lines in each paragraph/legend.

  Any other thoughts?

  Steve

  -your script can be incorporated into a FindChangeByList .txt file?

  No, he needs to access real paragraph finds it to count the number of line of this paragraph. FindChangeByList Find/change regular strings together, and you can not search for a certain number of lines.

  -what it takes to go to the 'findStyle ('Callout_1');"reference within a"group of paragraph style"called"legends "?

  ... Nothing. Because the style can be within a group, I wrote this little function. The findStyle performs a loop on * all * paragraph styles in the document, the root and in each group and returns the first style with the name that you provide in the function call (tested!).

  So if there is a 'Callout_1' style anywhere, it should find it... Are you sure you put the name at the top of the script? I've seen in a post later that it is actually called "Callout_1line".

• divide the table based on the number of lines

  Hello
  
  I am trying to split a table based on the number of lines and then treat.
  Say I have a TEST_XXX table that contains 50 lines, what I would do is.
  to access multiple lines of 10. How can we achieve this?
  
  What I thought is, once the table is created and the line are filled.
  Add a new column to the table and perform a procedure that inserts of 1 to 10 first lines
  and 2 to 10 lines and 3 to 10 next ranks... etc. Based on this, that we can treat
  the first set of lines then play next or etc...
  
  is there a better way to do it?
  
  Code to create the table:
  

  CREATE TABLE TEST_XXX
  (
    A_ID   VARCHAR2(10),
    B_ID   NUMBER,
    c_ID   VARCHAR2(10),
    D_ID   NUMBER
  )

  Code to add lines:
  
  

  DECLARE
  BEGIN
    FOR I IN 1..50
    LOOP
        INSERT INTO TEST_XXX VALUES('ABCDE',123,'ZYXWV',321);
    END LOOP;
    COMMIT;
  END;

  The original problem is, I have a huge table, and I write a sql query to process,
  When I treat him by selecting all the values in the table, it is very slow.
  But when I have treat small Coulon (say 100 rows), it works very well.
  That's how I got the approach described above in mind.

  You can use NTILE.

  See:
  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14200/functions101.htm#SQLRF00680
  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:47910227585839

• Yahoo AutoComplete component - can not increase the number of lines

  I'm trying to manipulate Yahoo autoComplete component, found in:
  http://developer.Yahoo.com/Flash/Astra-Flash/AutoComplete/examples.html
  
  My one thing I want to change is the number of lines, similar to the CS3 list item. By default, they display a number of lines of 5. I've tried to set rowCount = 10, but I see that 5 rows when the AutoComplete component displays items.
  
  Create an instance of AutoComplete
  var autoComplete:AutoComplete = new AutoComplete();
  
  give him data
  autoComplete.dataProvider = new DataProvider (myData);
  autoComplete.rowCount = 10;
  
  The drop-down menu that appears when you type in the AutoComplete field always displays only 5, not 10, objects. Does anyone have experience with this component, or feeling up to their example FLA and see how I need to be wrongly trying to adjust this property?
  
  Thanks for any help!

  I found a solution that worked for me.

  You can set the number of lines after the immediate creation of an instance of this component - it should be set when a user interacts with it. I found myself by setting the number of lines on a CHANGE listener. Don't l; t look like the logical place to put it, but it worked fine for my needs in the long run.