Columns mysteriously changed its name

Similar Questions

• WMP changes its name at the time where I change the names in the playlists

  Hi people, to support

  I have XP and WMP 11. I love working with WMP very much but I have a big problem with the creation of playlists.

  First, he must know that. If I make a playlist of different artists like this and sync it to my MP3 player, the player will put all the artists and the album separately names in its lists of an artist folder and album that creates a huge long folder to browse to the 'normal' CD That's why I change at least the various names of artists in 1980, for example has a slow. A brilliant solution, was it not for the fact that WMP is very difficult to accept these changes in the mine. He continues to change the names of 'my' name of origin found in their records. After changing several times later he accepts it, most of the time. But... the problem is worse when I want a particular song appear in more than one playlist, as Slow 1980 and slower. He even sometimes change the names I put in the original name in the original records. I hope you understand what I'm trying to explain, and it drives me nuts keep changing the names. (You probably also I know I have change the names in WMP or in the files folder.)

  How can I solve this? Thanks a lot for help.

  Hello

  To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:

  Step 1:

  Exit Windows Media Player.

  For Windows XP:

  (a) click Start,

  (b) click Run,

  (c) type %userprofile%\Local Settings\Application Data\Microsoft\Media Player,

  (d) and then click OK.

  Note You don't have to remove the folders that are in this folder.

  (e) restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

  Step 2:

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  (a) output Windows Media Player.

  (b) If you are running Windows XP, click Start, click run, type %userprofile%\Local Settings\Application Data\Microsoftand then click OK.

  Note Windows Media Player automatically rebuilds the database.

  See also:

  Create and use your own customized reading lists

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/playlists

  Add or edit media information

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/album-info

• Apple TV changes its name does not change in my Apple ID account?

  Why, if I change the name of my Apple TV, didn't he change the name of the device in my Apple ID account?

  You may need to sign out of the account, and then log.

  TT2

• has changed its name to file my images and all files are now empty and pictures does not open

  I have a WD elements external hard drive plugged into my laptop and I can open is no longer one of the photos stored on my hard drive. Files appear but they were no match for them, and when I try to open, windows image viewer says: the file is empty. I changed the name of the file for my photos (replaced by A - my images to put at the top of the list in alphabetical order) which someone told me can mess things up (if this is the case, a pop-up window should probably stop change me?), so I changed it back. I don't know if the pictures had ceased to work before that date or as a result of this change.

  There are more than 65,000 files in my pictures, including pictures of my little boy that I have anywhere else, so it is extremely important to me that I have the files. Please help me!

  Hello

  If you don't get any other suggestions, use the free version of this program to recover your photos:

  http://www.Piriform.com/Recuva

  See you soon.

• Symbol instance of swap by changing its name?

  Hi all

  I am trying to swap symbols in-situ by changing the 'name' of the symbol instance property.

  My rudimentary script can find the name of the existing symbol (for me, it's a little triumph!). The Illustrator document has two symbols in the Panel symbols, 'blue_square' and 'red_circle '. I run the script with an instance of 'blue_square' (and nothing else) on the page and try to change the name to "red_circle":

  var docRef = activeDocument;

  var symbolitem = docRef.symbolItems [0]

  var NomSymbole = symbolitem.symbol.name;

  newname = "red_circle"; var

  SymbolItem.Selected = true;

  This next line is causing the problem:

  SymbolItem.Symbol.Name = newname;

  This causes an error - "the name is in use". Is could someone please tell me where I'm wrong?

  Thank you for your interest.

  #target illustrator
  
  symbolSwapper()
  
  function symbolSwapper() {
  
            var doc, count, red, blue, i;
  
            doc = app.activeDocument;
  
            count = doc.symbolItems.length;
  
            red = doc.symbols.getByName( 'Red Circle' );
  
            for ( i = 0; i < count; i++ ) {
  
                      doc.symbolItems[i].symbol = red;
  
            }
  
            app.redraw();
  
  };
  

• Its replacement by the view with a physical table... and then perhaps change its name

  Hi all
  
  Let's say I have a vision of "Select" as a source on the physical layer. Some time later, I decide to replace it with an ordinary table
  
  (1) simply changing Select for the physical Table won't be enough in table properties?
  
  (2) what will happen if I decide to go with a different name for this new table? (I guess that the administration tool would pick up the change and spread throughout of the MDB and presentation - but I try just to make sure)

  Well either you keep the fully qualified name of the object (i.e. change just where it points to the bottom) - in which case there is no need even to touch whatever it is above the physical layer - or otherwise you put the new table/view in place and then use the Admin Utility tool "replace column or logical Table Source Table" for let the wizard remapping for you.

  See you soon,.
  C.

• How can I get unidentified network settings stick, private and change its name?

  I use Windows Internet Connection Sharing (ICS) on my computer at home, because my Internet is wireless usb (AT & T Quicksilver) device that can be plugged directly into my router (Linksys WRT110).  Given that the router accepts only as an internet connection ethernet cables, instead I use my desktop computer as the connection (ICS) and using the router only as a hub, essentially.

  Everything is working well at the moment.  The Office will connect to the internet and other computers and devices connected to the router (wired and wireless) are all works well and can share the internet connection.

  But whenever I restart the desktop computer, the default network is "unidentified network" and as a type of 'Public' without discovery service.  So every time I go to network settings and make it private.  It works fine until the next reboot.  In addition, I am not able to change the network name.  The field seems open for entry, but selecting and typing does nothing.

  I don't know if it's relevant, but other devices to connect to the network are laptops (of various working groups, need to be since they are mainly used to work) and a DirecTV DVR, using Mediashare (via Windows Media Server).  Yet once, they all work, after doing the private network, but this is lost at every restart of the desktop computer.

  I wish I could have it be a private network that is identified by a name and keep these parameters at each reboot.  But I have yet to find an online solution that worked for me.

  Matt,

  Thank you very much.  It worked like a charm.  I was pulling my hair out on this one for a few months.  Once again, a big thank you!

  For anyone else trying to solve the same problem, here is the summary of the solution.

  I have already had no default gateway specified.  As advised by Matt, I right click on the Local network connection (in network and sharing Center / manage network connections) and went in the IPV4 properties and put in the address of a default gateway (equal to the IP address of my router/hub).  I left the ICS settings and all the way IP addresses which I had them before (with zero in the third byte of the IP address of all and ICS turned on).  I have no registry changes.  The only change is the default gateway.  After this change, a wizard appears to allow me to set up the network properly.  And I could rename and define the private network.  And the changes were intact after several reboots.  Perfect.

  -Andrew

• My Lifecam vx-800 (model 1407) changed its name in Vimicro USB2.0 Pc Camera (Venus) and it no longer works

  Hello

  There are some days that I tried to use a screen recording software, but I noticed that it wasn't showing my webcam (Lifecam VX-800) as a record of entry as usually... I went to check in Device Manager and my webcam has been shown is more like a lifecam, but as a Vimicro USB2.0 Pc Camera (Venus)... I tried the drivers updated and reinstalling software lifecam... but on the vx-800 page There is no link with the drivers and is not working with the relocation.

  the device is recognized by the pc, but with the wrong name, and I can't use it as a "microphone" as I did before.

  Please help me

  Marco

  Hello Marco,.

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  Have you made any changes to your computer hardware or software?

  I appreciate your efforts to resolve the issue.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run hardware and troubleshooting of devices and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  If this does not help, then use method 2.

  Method 2:
  Please use the suggestions contained in this Microsoft Knowledge base article and check the issue.
  Reference:
  Troubleshoot failures to find the new LifeCam hardware
  http://support.Microsoft.com/kb/929087

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  See also:
  Troubleshooting: Webcams
  http://www.Microsoft.com/hardware/en-in/help/support/troubleshooting/webcam/LifeCam-Setup

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• My LifeCam VX-2000 changed its name to Vimicro USB2.0 Pc Camera (Venus)

  Hello

  A few days ago I tried to use a screen recording software, but I noticed that it wasn't showing my Lifecam VX-2000 webcam as a record of entry as usually... I went to check in Device Manager and my webcam has been shown is more like a lifecam, but as a Vimicro USB2.0 Pc Camera (Venus)... I tried to update the drivers and reinstall the lifecam software... but it does not work.

  the device is recognized by the pc, but with the wrong name, and I can't use it as a "microphone" as I did before.

  Please help me

  Marco

  Hello Marco,.

  Thanks for the info and sorry for the late reply.

  However, have you tried method 3 form steps in my previous post?

  If so, please reply with the results.

  See also:

  Update a hardware driver that is not working properly.
  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  Please respond with the information required to help solve you the problem on that.

  Thank you

• How can I change the name of the ion HD my Time Capsule airport

  My time capsule airport has changed its name to data and now I can't use it. What can I do?

  Not sure why you can't use 'Data' as the name of the disk hard Time Capsule, since it is the default value.

  But, if you want to change the name of 'Data' to something else...

  Open the AirPort on your Mac utility... (Finder > Applications > utilities > AirPort Utility)

  Click on the image of the time Capsule

  Click on edit in the window that appears

  Click the disks at the top of the next window

  Next to Partitions, you will see "Data".

  Click directly on the name of 'Data' and the box will change to allow you to edit the name, just as you can change the name of any other player

  In the example below, I changed the name of the drive 'safeguards '.

  Click Update at the bottom right of the window to save the changes you have made

  

• Can I uninstall and put on two different computers? I also need to change the name of the account.

  My boss wants me to take my computer adobe so two other Associates can have instead. He's also under my name and need to change its name. Is this possible?

  Would you sign out of your Cloud account to disable your computer existing... the account change requires Adobe

  This is an open forum with a mixture of program users and staff of Adobe, Adobe support... you need Adobe support

  Coordinates of Adobe - http://helpx.adobe.com/contact.html can help

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• How to dynamically change the names of columns LOV

  Hello

  I use JDeveloper 11.1.1.4

  I have only one requirement, while I need to change the names of columns in the list of values dynamically.

  How can I achieve it.

  Please help me.

  Kind regards

  John.

  Hello

  > But I want to change the column names 'ID' and 'Name' dynamically.

  Based on what? Condition? If Yes, have you tried to set the text for the label as an expression? If not based on the condition, you can also expose the VO to Java Impl and need a way to get the attribute and change its label.

  Arun-

• How to change the name of column in table effectively

  Hello
  
  I use JDev 11.1.1.4.0.
  
  My JSF page is done with 3 or 4 EOs, your and LOVs. However, one of the EO tables has changed its column name. The name change is important for the standard project.
  
  I remember having a lot of harm in changing a prior column name (I had to start over), so I would ask the experts take on how to do it without too much impact.
  
  This particular column is an OT, VO and lives as a field test on a JSF page.
  
  All comments or suggestions will be greatly appreciated.
  
  Thank you
  
  Bones Jones

  Indeed, the only thing you would have to change is the ColumnName of the object attribute specific entity (name of column of data in the attribute from entity dialog box). Now, if you used sync with databases... feature you will need to go through a full process of refactoring. In this case, use the menu refactor in JDeveloper. See if anything on this post can help you to: http://jdeveloperfaq.blogspot.com/2010/04/faq-20-how-to-refactor-adf-components.html

• Error Impossible creatures: the resoucre you're looking could have been removed, had its name changed, or is temporairly unavailable

  original title: Impossible creatures

  did you remove the link to install the trial version impossible creatures, otherwise why he always say the resoucre you are looking for has been deleted, its name changed or is temporairly unavailable

  Try this site to download. I tried it and it works.

  http://games.Softpedia.com/get/games-demo/impossible-creatures-demo.shtml

• How 2 change the name of image, including its .xmp file?

  How 2 change the name of image, including its .xmp file?

  I suppose that if I change image file name, the file '.xmp' that accompanies it will no longer an appropriate reference to associate. Also, I guess I can just simply change the name of the image file and give its eponymous .xmp. That means, for example, if I have:

  "This1stPhotoOfJane.dng" and "This1stPhotoOfJane.xmp"

  and change their names manually:

  "JanePhoto1.dng" and "JanePhoto1.xmp"

  It would not work.

  So is the simple way to do it?

  I have a bunch of files that I forgot to name who have already gone through the raw editor and now I would like to give them a real name as opposed to a single series of numbers they currently have.

  You should be able to bridge, since by default, the file of the side car is hidden. I think he knows enough to rename both.

  Copy the image and the file in a temporary folder, rename it and check that it actually did. If I myself remember copy or film a raw file would also move or copy the file, then it would be a good time to check that as well.