combining the page fixed and fluid width in a site

Similar Questions

• One of the pages of my site moves to the right when using anchors to scroll. I checked for Ghost off the page boxes and checked that all my 100% width images are actually 100%. I discovered that this problem is in Chrome and do not hap

  One of the pages of my site moves to the right when using anchors to scroll. I checked for Ghost off the page boxes and checked that all my 100% width images are actually 100%. I discovered that this problem is chrome and does not happen in Firefox. Any suggestions?

  Thank you Brad, my ankles were lined up however they were in the Center. I am proposing to-100 and it solved the problem. Thanks for your help.

• Printer all in one HP PSC 2175v prints the page number and the title of the document

  Printer all in one HP PSC 2175v prints the page number and the title of the document.

  This is the default value?  Can I disable this?  I would prefer to print only the document, without page numbers and the title.

  I was printing of either Wordpad specifications, using Windows XP.

  Using the front panel of the printer, I loaded the defaults of the printer, and that fixed the problem.

  Thank you

• Display the page number and the total number of pages in a single domain. Is this possible?

  I would like to than my report to view the number of page in the format "< page number > of < total page >", as "2 of the 6". Rather than create 2 fields to display the page number and the total number of pages and 1 label to display the word 'from' in the Middle, can I combine all of this into one? If so, how?
  
  Note: I woud wants to use "physical page number" as "total physical pages" and page number as the total number of pages.
  
  Published by: 1008305 on June 6, 2013 19:31

  Hello

  It is not possible to write in a.

  Even I try for the same, but didn't find any solution.

  We ave only two options to display the page number;

  1.) reports under construction Page number option: string will be: page & to &

  2.), we can take 2 text field that displays the page number and the total number of pages with 'from' lable inside the two text fields.

  IF any new you will come to know then.

  Thank you

  SHAH HARD

• I installed 5.6.2 Pages but all my old documents will open with ' 08 how can I delete the Pages ' 08 and update all the old documents

  I installed 5.6.2 Pages but all my old documents will open with ' 08 v.3.03 How can I remove the Pages ' 08 and update all the old documents

  5 pages is located in your Applications folder.

  Pages ' 08 is located in your Applications/iWork ' 08 folder.

  If you open your old documents Pages ' 08 with 5 Pages it will convert and if not damage, remove a large number of useful features.

  You will probably regret upgrading to 5 Pages which Apple has made extremely inconsistent and keeps changing its file format.

  Peter

• Change the page size and text in Firefox 35.0.1

  I had a small red P at the top right of Firefox that changed the page size and the fonts that I lost after a reset: How do I get it back?

  Do you mean this extension?

  • Default FullZoom Level - https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

  You can check the "Old data Firefox" folder on the desktop to see what extensions you previously had.

• I have a Macbook Pro (13 - inch, Mid 2012), processor 2.5 GHz Intel Core i5, memory 4 GB 1600 MHz DDR3 and the serial number C1MK12K6DTY3. On the Pages, Numbers and Keynote, y at - it any other way to get them for free?

  I have a Macbook Pro (13 - inch, Mid 2012), processor 2.5 GHz Intel Core i5, memory 4 GB 1600 MHz DDR3 and the serial number C1 * TY3. On the Pages, Numbers and Keynote, y at - it any other way to get them for free?

  < personal information under the direction of the host >

  Only when you buy a new Mac. Since the end of 2013 the app came with the purchase of a Mac.

• I try to install the progrsm Fixit and it does not allow me to make the race he leaves on the download

  original title: installation FIXIT

  I try to install the progrsm Fixit and it does not allow me to make the race he leaves on the download?

  Hello

  1. What operating system do you work?
  2. What Fix - it you are trying to install?
  3. What version of internet explore do you use?

  Please refer to the below link mentioned before asking your question so that you can provide all the relevant information for us to help you:

  http://support.Microsoft.com/kb/555375

  You can try the following:

  Remove temporary internet files

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Also try to save the file on your computer, then run it.

• I downloaded several updates available for Windows Vista and since that time, I was not able to access my emails. I use netscape and the page opens and freezes.

  I downloaded several updates for vista (no critical updates) and since that time, I was not able to access my emails. I use netscape and the page opens and freezes. What should I try?

  original title: EMAIL GEL

  Hello

  What updates do you have installed?

  Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig in the search box
  2. press ENTER.

  The System Configuration Utility dialog box appears.

  3. click on the general tab, click Normal startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  a. click Start.
  (b) in the search box type eventvwr.msc , and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

• After I 'google' a web site address, I am unable to access the page directly by clicking on the link in the address; the page hangs and does not respond.

  After I 'google' a web site address, I am unable to access the page directly by clicking on the link in the address; the page hangs and does not respond.

  What antivirus you have installed before? Is the virus/malware-free system? If you have a current antivirus installed and you went through at least some of the malware removal steps I list in the link I have given if you are sure that the system is clean, uninstall McAfee and see if that solves your problem. If you connect to the Internet behind a router, you can be sure for this quick test. If you are connected directly to a cable/dsl modem, then firstly download Avast or even Microsoft Security Essentials (both free). Then, disconnect from the Internet and uninstall McAfee. Install the antivirus of your choice and test. If all goes well, your problems have been caused by McAfee. This is not surprising since McAfee is perhaps the worst choice for safety, we could do.

  If you had any antivirus installed before McAfee, then you must go through all stages of thorough removal of malware listed in the my link before anything else. MS - MVP - Elephant Boy computers - don't panic!

• How to generate the alert when pageitem move on the page? and what class boss be use to move pageitem

  How to generate the alert when pageitem move on the page? and what class boss be use to move pageitem

  Hi Philippe,.

  You can see the kDocBoss for the ClassID with the PMIID IID_ITRANSFORM_DOCUMENT kLocationChangedMessage.

  Markus

• Beginner jQuery is having trouble with the links and the page redirect and page caching.

  Hi all

  I'm trying to update an old legacy of multipage site (each page has headers html etc.), adding jQuery Mobile. Most of the time it goes well, but I'm having some problems with the links, the redirect of the page, and caching.

  I write javascript like this...

  < script >

  -do things - then-

  Window.Location.Replace ("Page1.html");

  < /script >

  and links like this

  
  

  < a class = "-ui ui-btn-b btn tsize1" href = "page2.html" rel = "external" > page 2 < /a > "

  
  

  CACHING ISSUES

  
  

  On many pages - such as those that I have problems with, I've added no caching of code as...

  < head >

  < META HTTP-EQUIV = "Pragma" CONTENT = "no-cache" >

  < META HTTP-EQUIV = "Expires" CONTENT = "-1" >

  ... more...

  < head >

  Problem: for example, I can go to Page 1 and click on a link to go to page 2 and page 2 has the lines "no cache" header. The problem is that a fresh change of page 2 does not appear even with no cache lines above and even if I hit refresh in the browser that I thought it was supposed to reload the page (live get of the site). On the contrary, it seems to continue to see the old content before the update.

  In another case I could be on page 21 and click on a link that goes to the publicationfootnote22 and made a few treatment database and then goes to the page33. In this case, my fees top22 updates are not appearing and showing just the old cache data.

  Q: what is the best way, at least while I am writing code, to force the Page to refresh (non-cache), I can see my updates all the time, because otherwise it becomes very confusing because I'm sure you know.

  Thanks in advance: Dave

  Hi Dave,.

  Are you handy with your developer tools? It's always where I head when I need to look inside something. Before getting anywhere in addition or developed, check the response code you get for the page request and see what is the numeric code. If it is 200, you get a new copy. If it is 304 then your browser is striking the same content or something in your UI is to preserve the previously loaded document fragment.

  Photos make it easy, Chrome this is grabbing a small page for the first time and with disable cache enabled, and we get the status code 200:

  

  If I keep refreshing with "Disable cache" activated so I keep getting GET/200, copy fees.

  However, delete the "disable cache" to speed things up and the server and the client negotiate and check if she even needs to send you the document (if she thinks she's changed), and if not, of course you GET/304, or "load cache:

  

  Whenever I update I get GET/304, hitting the cache.

  Make sure your requests are GET/200 if you expect not to be cached.

• I filled out a form on the page 8 and he saved several times along the way, and now when I open this file, the form is empty?  How can I save my work so I can open the form later and it contains all my data?

  I filled out a form on the page 8 and he saved several times along the way, and now when I open this file, the form is empty?  How can I save my work so I can open the form later and it contains all my data?

  Hi Eileen97933052,

  The PDF form must be extended drive in order to have this feature to save & print the form data.

  Please confirm by the PDF Creator is the PDF reader or not extended.

  Otherwise, if you have Acrobat installed on your system, you can reader extend PDF form yourself.

  Kind regards

  Nicos

• Change the Page numbers and Sections in a book once it's underway?

  CS5.5

  10.6.8 MacBookPro

  I'm working on a book of 450-500 pages with 4 chapters, 150 + images full page of text, end and beginning of information (title page, preface, introduction, table of contents, annexes, glossary, end notes).

  I booked three chapters using the InDesign book feature, now works on the bits before and end and a final chapter (actually Chapter 1).

  I watched the excellent video of Michael Murphy on the feature of the book, and it adds the page numbering and sections before he created the model. I make them after I have chapters in the book.

  A question:

  How can I add a separate paging once I have booked several chapters?
  I also want to add an article and before any style i, ii, iii, etc., and after 1, 2, 3, 4, etc.

  Second question

  How can I add the title of the book to all the pages in the left hand and the title of the chapter on the right pages now? I've never done it in InDesign, and my attempts after reading aid do not work even on a chapter outside the service book. In the book feature, I don't know yet how to start.

  Thank you very much!

  A question: same thing if you are working on a single document to create a doc of island new section where you want and adjust the figures. Numbering book will adjust when you synchronize the numbers in the book panel.

  Two Qusruib: put this stuff on master pages. Title of the book is not likely to change from page to page, then type this information in a text block. To the chapter title, use a running Header Variable (see variables in the help).

• How to fix the pages flashing and goes black when I the same scrolling so I reinstalled?

  Often but not always the Firefox window turn black areas. This includes menus and data entry fields. Sometimes a page opens OK but turns black as soon as I start to scroll by using the mouse or the scroll bar. Random positions in the scroll of the page is displayed again, but the problem persists. If I run Firefox in safe mode, the problem goes away. I tried to uninstall and reinstall Firefox without success. I also tried to disable plugins without success. Also, I used the option "reset Firefox" without success.

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/