Dark LaserJet CP1025nw print

Similar Questions

• The laser color HP LaserJet CP1025nw printer cannot print - points held in the queue

  I am running Windows 7 64 bit and my laser color HP LaserJet CP1025nw printer fails to print jobs in the queue. I turned off the printer accidentally as he was preparing to print a document, and since then I am unable to get the printer to work. I used the HP print and Scan doctor and he said that he had detected and solved a problem with the queue in vain the printer print a test page. What other options do I have? Thank you.

  Rrolley, looks like you have a problem with the print queue of the printer. To start, just to tell you (that you probably think) it is not good to switch off while he's getting a print request. To resolve this problem, I recommend that you turn off the printer and the computer completely and cut the power for about thirty seconds. Then power the two machines back on, and when they started well then try the print job.

  Let me know how it goes and I'll get right back with you!

• color laserjet cp1025nw print streaky

  I get entrelardé & dirty my HP Laserjet CP1025nw color printing.

  Have executed the impression several times cleaning process without success.

  This just happened. He perfectly managed so far.

  Hello newoboz,

  Welcome to the Forums of HP Support!

  After reading your post, I see that you have the LaserJet CP1025nw and it is poor quality printing. Run the cleaning of the printer will usually clear up problems.

  I was able to locate this HP document: print quality problems, it contains 11 steps to help solve this problem for you.

  I hope this helps, let me know if it does not work.

  Kind regards

• Color LaserJet CP1025nw: printer does not print after changing cartridges

  I just inserted cartridges M, Y and C in my printer.  They are official cartridges 126 a.  I followed all the instructions (shook gently, removed the orange protective cover and pulled the Ribbon out).  I inserted one at a time, waiting after each insertion for the printer to run through its cycle.  Then I tried to print a color print job with no luck.  Then I tried to print a simple typed page - once again, no luck!

  Is it possible to print a test page?  I don't get any messages on my computer.  When I look at the print queue, it says "error printing".  Help, please!  Thank you.

  Note later: my mistake!  I turn on the blue light from the top; Once lit, the printer has been good to go.  Can tell you that I'm not very technologically savvy?

  So it works very well now?

• My Color LaserJet CP1025nw print a vertical line of blobs of different color structured about 4 mm wide

  

  What it means? How to fix the printer?

  I solved the problem when to replace the print with the new drum.

• I can't get my printer LaserJet CP1025nw of color appears on the installation wizard

  I am running Snow Leopard on my iMac. I downloaded the printer and the file of the software on the HP site. However, when I get to the Color LaserJet CP1025nw Printer Setup Wizard does not appear on the list even though I have just completed the installation.

  Hi Casey,.

  Sorry, had the wrong impression that you use a connection network caused the question sympthoms.

  Please make sure that the printer, USB is directly connected to your Mac and no more than 2 - 3 m long without using a USB hub or extension. It can cause serious communication problems. Please also plug the USB key into a different USB port on your Mac.

  If you have an iMac, also be sure to plug the USB key into a port on the back of the printer and not on the keyboard (like the keyboard ports are not powered and actually provide the same power as the use of a hub)

  On the Mac, click the Apple menu.

  While holding the ALT key, click System Profiler from the menu.

  In the left pane, click USB

  You see the printer listed in the right pane?

  If the printer is not listed under USB, this means that the unable to communicate with him without any problem of Mac software, so I would recomment USB cable it to try another.

  If the printer detected as expected, please let me know.

  Kind regards

  Shlomi

• HP laserjet cp1025nw: cp 1025nw do not print

  Hello

  I just bought a hp laserjet cp1025nw.

  Install the driver using the printing preferences panel.

  When I try to print a file find all ok on the mac, it says it's printing, but all arrive on the printer.

  It just does nothing.

  Tried to delete the driver reinstallation it several times, tried to off/on the printer several times, but the printer does not print anything.

  Any help?

  Is there a utility printer for this model?

  I looked on your support site and it just show firmware update and ePrint app, can't see a utility application in your site.

  Thanks for your reply.

  I solved the problem, I don't know why, but the first 2 times I tryied to install the driver through the apple Printer preferences he made me select the driver hp but not specific for the exact model.

  The third time that I canceled / reinstall the driver it showed me the submenu with the specific parameters for cp1025nw.

  Now it works,

• LaserJet CP1025NW: Power paper LaserJet CP1025NW problem

  I installed a new LaserJet CP1025NW yesterday and it was working fine. This morning the user was printing and paper began to go through the printer, he proved on the side and stuck. The user removed the book and found a small piece of black plastic that was broken and bent. She has been aligned on the left side of the feed roller bar (the right side has also a.) Part number molded on the part is "RC3 - 0170 1-2» I was not able to find this listed anywhere part. Is it available? Thank you.

  Hi @WadeDunham,

  Welcome to the HP Forums!

  I noticed that you have a broken with your printer LaserJet CP1025NW part. I am pleased to see that for you!

  According to the site http://partsurfer.hp.com/ , this part doesn't seem to be available. Most likely, if there is a piece broken with the printer, the printer itself will need to be replaced/repaired. Please contact HPtelephone support for further assistance. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Good luck!

  "Please click the Thumbs up icon below to thank me for having responded."

• Color LASERJET CP1025nw - Fuser error

  I get a 'Fixer' error when I print on my printer Laserjet CP1025nw.  I have powerd extinguish by instructions and left HP it goes off and unplugged during the minutes 25 + recommended, but nothing works.  There is a triangle with one! the control panel and I'm sure that has to go.

  Any thoughts?

  Thank you!!! \

  Steveoh

  I found the solution on another forum HP.  The guy said to replace the black toner cartridge and it worked!  He said that it had removed all the toner cartridges and put them back in, but no luck.  Changing the black cartridge has worked for me and him!  My printer is less than a year and I have probably put 2 reams of paper through it, so I'm happy that it worked!

  steveoh

• Color LaserJet CP1025nw: new PC Windows 10, said CP1025nw is Offline after find and install it.

  My CP1025nw is on my wired network Ethernet. My new desktop to Winows 10 PC finds it and it installs, watch even correct for this IP address in the info page of HP. But it will not print to it. Says it is Offline, tells me to turn it on. But if it is not enabled, how my PC find it and get his IP address? I can even ping by using Windows PowerShell.

  My other PC on the network print to it. This PC also running Windows 10, as an update to 8.1

  I tried to remove and re-add several times. Have rebooted several times, turned the printer on and off many times.

  BTW, I do not use the direct wireless functionality for this printer. It's all pure Ethernet/TCP-IP, Wired.

  It looks like a bug in the driver. How can I get a driver that works well, like my other 10 PC of Windows? I use all the HP tools that I can find. They say that there is no update pending for this driver.

  Hi @Allie_Sch,

  Welcome to the Forums of HP Support!

  I see that you are having problems with your HP LaserJet Pro CP1025nw color printer disconnect. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  It looks like it could be communication issue between your computer and the printer or there is a problem in Windows.

  I would like to start by performing the steps in these guides, Printers HP LaserJet - "offline" Printer Status Message appears and HP LaserJet Pro CP1025nw printer - printer does not maintain the wireless connection.

   

• HP LaserJet CP1025nw - shortcut or Windows 8 cleaning cleaning Instructions

  I have a HP LaserJet CP1025nw, USB to a Vista laptop.  I've had for about a year and a half and am well versed in the issues he has with the error of system tray HP resulting in the impossibility to access the device settings to start the cleaning cycle, which is all I have to do.  I also spent hours on the phone with HP from the beginning without success.

  Is there a combination of keys on the printer, a shortcut, which can be pressed to start the cleaning cycle?

  OR

  I have a second, brand new, 8 HP Windows computer this printer wireless connected to.  How can I access the device for this printer settings in Windows 8 to start the cycle?  For example, should be connected?  Driver full features?

  Solved my problem! Full featured driver on the Windows 8 machine allowed me to access the device settings and start the cleaning cycle.

• HP LaserJet CP1025nw: HP LaserJet CP1025nw color work is not with windows 10

  I have recently upgraded to windows 7 to 10 on a single computer, purchased another and the 3rd was Windows 10 all year that we had.  I have a LaserJet CP1025nw which worked fine until the last few weeks.  The new computer, it is not recognized to install, one that was just upgraded, it is still listed, but it's not working and the laptop which was windows 10, it is printed in the last month, now, without modification, only an update of windows, the printer disappeared and will not re - install.  Attach the USB cord is not working and I checked on the HP site, for more than 5 hours looking for a solution, and even if it is supposed to be updated drivers to download, when I download them, the file for the 1025 installs the drivers for the 1020.  Nothing works and I'm at my wits end.  The printer is not that old, and I have several refills that I would use because I do not use the printer much at all.  Tips for good drivers would be very much appreciated.

  @Tanster , welcome to the Forums of HP, it's a great place to get help, find answers and advice.
  Thanks for posting your request, I'll be more than happy to help you.

  I understand that your HP LaserJet Pro CP1025nw color printer does not work after upgrade to Windows OS 10.

  Don't worry because I have a few steps that should help you to solve this problem.
   
  And here's the step by step guide for you in the links below:
   
  1. update the Firmware on the printer

  2. using your printer with Windows 10
   
  Let me know how it works.
  I wish you a good day ahead.

• HP Color Laserjet CP2025 print: color printing problem

  Had the printer listed above for several years and love it.  Have just started having problems with the printer does not print not not in color.  Have a recorded document that needs to be printed every month and have had no problems with it, until yesterday when it is printed in black only.  Another document word also printed in black only.  I printed a test page printed correctly.

  Don't know if there is a definition in the document, or is it a printer problem.  Help!

  Welcome to the community @mwillis HP

  I came across your post about the color printing problem and wanted to answer to help with my suggestions. Please see the guide below to resolve this issue.

  HP Color LaserJet - cannot print in color or impossible to Auto-Duplex (two-sided printing fails) after the installation of the UPD

  Let me know if you have any questions.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

• HP Laserjet P1606dn: Printer offline

  Everytime I go to print, or the printer will automatically print letters nonsense at the top of each page (printer continues to fuel the continuous pages unless I have stop) OR it will say it is disconnected. Recently, my husband removed the printer in system preferences to start a clean slate. For some reason, now, the printer cannot yet be read to add in the preferences system (printers). All solutions? Thank you!

  Hi @RAKLER,

  Welcome to the HP Forums!

  I read your post that your HP Laserjet P1606dn printer keeps going offline. I'm happy to help you!

  Please, try the procedure described in this guide, "printer offline" or "printer not responding" Message (OS X)and let me know the results!

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope hear from you soon!

• HP color laserjet 2605dn printer

  The HP COLOR LASERJET 2605dn PRINTER is compatible with Windows 10?

  HP LaserJet 2605dn printer range is compatible with Windows 10. Check below link for compatibility
  http://www.Microsoft.com/en-in/Windows/compatibility/CompatCenter/ProductDetailsViewer?name=HP%20LaserJet%202605dn%20Laser%20Printer & vendor = HP & local is 1033% 2C3081% 2C4105% 2C16393 & ModelOrVersion is Q7822A & BreadCrumbPath = 2605dn % 20 & LastSearchTerm = 2605dn %2 B & Type = Hardware, & tempOsid = Windows % 2010

  You can download drivers install n the link below:
  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=1140730 & swLangOid = 8 & swEnvOid = 4191