"Command failed" error in Oracle Discoverer 10g

Similar Questions

• MISSING_COMPONENT: oracle.discoverer.services

  Salvation of DBA
  
  We want to use Discoverer 10 g, for this, we have followed the following document.
  Topic: Using discoverer 10.1.2 with Oracle E-Business Suite 11i
  DOC - ID: 313418.1
  
  Step 1. I have installed Oracle Infrastructure in separate Directory.
  Step 2. I installed Oracle Application in the Supparate directory.
  Step 3. I copied file $FND_SECURE to THE new Oracle Application Server directory dbc in the discoverer / secure.
  Step 4. I copied the tnsnames.ora for the same new Oracle Application Server/network/admin directory.
  Step 5. I am trying to apply the 6472361 hotfix, it gives the following error in the new Oracle application server.
  
  [oracle@aqherptest 6472361] $ / s04/SIT/sitAS/Orleans/perl/bin/perl/s04/SIT/sitAS/Orleans/OPatch/opatch apply
  
  Setup Oracle interim Patch version 1.0.0.0.52
  Copyright (c) 2005 Oracle Corporation. All rights reserved...
  
  We recommend that you check the OPatch documentation under
  OPatch/docs for reference to use. We also recommend that you use
  the latest version of OPatch. To get the latest version of OPatch
  and other support related issues, please refer to the document
  293369.1, which is visible from the metalink.oracle.com address
  
  Oracle Home = / s04/SIT/sitAS/Orleans
  Location of Oracle Universal Installer components = / s04/SIT/sitAS/Orleans/Yes
  OraInstaller.jar location = "/ s04/SIT/sitAS/Orleans/Yes/jlib.
  Universal Oracle install a shared library = /s04/SIT/sitAS/oraas/oui/lib/linux/liboraInstaller.so
  Location of the pointer of the Oracle inventory = /etc/oraInst.loc
  Location of the Oracle inventory = / s04/SIT/sitAS/Orleans/inventory
  Path to the Java = /s04/SIT/sitAS/oraas/jre/1.4.2/bin/java
  Logfile = /s04/SIT/sitAS/oraas/.patch_storage/ < patch ID > / *.log
  
  
  MISSING_COMPONENT: oracle.discoverer.services, 10.1.2.2.0
  
  This House of Oracle has no components/versions required by the patch.
  
  ERROR: OPatch failed during pre-reqs check.
  [oracle@aqherptest 6472361] $
  
  
  Please tell me if I do one any error. and please solve my problem above.
  
  Thank you
  SG

  SG,

  Review the following documents.

  Note: 465469.1 - an update rollup installation fails with ' "Missing_component: Oracle.Discoverer.Services, 10.1.2.2.0"»
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=465469.1

  Note: 340174.1 - discoverer Opatch troubleshooting
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=340174.1

  Kind regards
  Hussein

• Failed to start oracle-ohasd, error: ioctl inappropriate for the ohasd device was able to start to roothas.pl

  Hello

  I am trying to install the Oracle 11.2.0.1 on Oracle Linux 7.0 database 64-bit deployed on VirtualBox. I'll put up a single on making ASM instance database so the grid on a stand-alone server installation. I launched the installer of grid with YES. When I run the script from root

  /U01/app/grid/product/11.2.0/grid/root.sh

  I get the following error:

  Default: no such file or directory for the command/sbin/initctl start oracle-ohasd

  Failed to start oracle-ohasd, error: Inappropriate ioctl for device

  ohasd could not start: ioctl inappropriate for this device, /u01/app/grid/product/11.2.0/grid/crs/install/roothas.pl line 296

  After installing Oracle Linux 7.0 there is no/etc/init and also no/sbin/initctl created automatically under Linux. I don't know if these directories need to be created automatically or not?

  I googled this problem. Most of the solutions is like this:

  """"""""""""""""""""""""""""""""""""""""""""""

  Hello

  Problem is indeed due to the incompatibility of the upstart/init. Here are the average working:

  1) proceed with the installation as usual until root.sh invocation.

  (2) prior to root.sh edition $GRID_HOME/crs/install/s_crsconfig_lib.pm, go to line 1173 (you should find a code like: if ($srv eq 'ohasd') {# OHASD Start).

  (3) insert a following code snippet before starting the game OHASD (line 1173)

  My $UPSTART_OHASD_SERVICE = 'oracle-ohasd. "

  My $INITCTL = "/ sbin/initctl;

  ($status, @output) = system_cmd_capture ("$INITCTL start $UPSTART_OHASD_SERVICE");

  If (0! = $status)

  {

  error ("' cannot start $UPSTART_OHASD_SERVICE, error: $! '");

  return $FAILED;

  }

  (4) create a file /etc/init/oracle-ohasd.conf with the following content inside

  # Start OHASD oracle

  start the runlevel [35]

  Stop the runlevel [. 35]

  respawn

  exec /etc/init.d/init.ohasd run > / dev/null 2 > & 1 </dev/null

  (5) call root.sh

  (6) complete the installation.

  If you have already run root.sh (unsuccessfully), simply roll back:

  $GRID_HOME/crs/install/roothas.pl - deconfig - force - verbose

  Make changes above and continue.

  """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""

  The part above is not the solution!

  How to solve the problem?

  Thank you!!!

  11.2.0.1 is not supported on RHEL7, even on RHEL6, you must install at least 11.2.0.3.

  You can see the matrix certification Oracle Support for Linux look at this document: master Note Linux OS requirements for database server (Doc ID 851598.1)

  Kind regards

  Oscar

• error message retr command failed

  For some reason, I am unable to ask a question or make a comment on the Thunderbird help section. I logged in and went through all the subcategories, but it brings no option to post.

  As of this post, I don't have this problem post on the firefox support forum.

  This is the solution I found the problem of "retr command failed:

  I noticed that I could get a few emails each time thunderbird would connect, before he got the error message. So, I put the option to check for new messages at 1 minute and left the computer at night. In the morning, he had obtained all e-mails from the server yahoo.verizon.

  See also additional information and alternatives in the my post under # 739827 answer ~ J99

• When I use the Client for NFS provided by Windows 7, I'm unable to connect. The "mount \\ip address\share Z:" command fails with the error code "the path not found network".

  Identification of customer's Windows 7 NFS UID GID information

  I am trying to connect to the Windows 7 Client NFS on a server running on a computer (VxWorks) NFS.  I am able to properly connect Client NFS software by a 3rd party on the NFS server.  However, when I use the Client for NFS provided by Windows 7, I am unable to connect.  The \\ip address\share Z: mount"command fails with the error code"the path not found network ".  I can't do a ping of the computer running the NFS server.

  The NFS Client operating system: Windows 7 Ultimate, 64-bit

  Data captured by Wireshark

  MOUNT V1 EXPORT call 3rd party client
  Identification information Flavor: AUTH_UNIX (1)
  Length: 32
  Stamp: 0xc7065970

  Machine name: PC
  UID: 1000
  GID: 1000

  MOUNT V1 EXPORT appeal of the NFS client
  Identification information Flavor: AUTH_NULL (0)
  Length: 0

  It seems that the credentials of NFS Client are not correct.  How can I change the flavor of AUTH_UNIX and the UID and GID to 1000?

  Hello VDAEMP,

  As Eddie and Sudarshan has said, the Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
  TechNet - Windows Server
   
  Thank you

• Oracle Database 10g error

  Please after that I have work in (Oracle Database 10g Express Edition)

  for three months, I have install and work in this (Oracle Database 10g Express Edition) without any proplem now does not

  When I run an exporter of the internet does not work

  can someone help me thanks

  Open the command window & question OS command sequence

  lsnrctl start

  lsnrctl status

  # Wait 60 seconds

  lsnrctl service

  COPY the results from above then PASTE all back here

• Oracle Discoverer of desupporting?, can I use the reports of 10g in R12

  Hi all
  I've heard so many times that Oracle will stop in favour of Oracle Discoverer reports.
  But at the same time, I can see the available literature on Support.oracle.com to configure the report of Discoverer for R12.
  Report of discoverer and discoverer BI are two different products which integrates differently with Oracle.
  Maybe my questions is very naïve, but want to have a correct answer.
  
  Report generation of discoverer using Discoverer 10g working for 11i will work for R12 as well?
  
  Thank you
  Archana
  
  Published by: archana. N August 2, 2012 01:12

  Salvation;

  Please see:
  Oracle Application Server 10 g Release 2 (10.1.2) support the State and alerts [ID 329361.1]
  Installation Planning for Oracle Application Server 10g - FAQ [ID 1071685.1]

  Check also:
  https://blogs.Oracle.com/stevenChan/entry/premier_support_as10g_ends_dec_2010

  PS: Please don't forget to change the status thread answer whether it is possible when believe you your thread replied, he pretend to wasting time in other forums users while they are looking outstanding which is not answered, thank you for understanding

  Respect of
  HELIOS

• form of bad bind variable error in oracle 10g

  I have a created a table in oracle database 10g
  create table myimage (image_id number, nom_image BLOB);
  
  I want to insert an image and recover an image through programming (don't want to block level) in oracle 10 g shape
  
  without using java Bean (and finely working in the two windows XP2 and Solaries)
  
  How can I do this please can someone give me the source code to do it because I am new in oracle forms.
  
  
  I need an immediate replay to this answer why because I urgently need it in my project web ERP

  You can use for WEBUTIL do, but

  without using java Bean (and finely working in the two windows XP2 and Solaries)

  WEBUTIL also contains javabean. I don't know why you have this restriction, I would say that you do not succeed without any java bean.

• Oracle Discoverer 4i (Portal db - oracle 8i) connectivity with database 11g problem

  Hi all

  We have oracle discoverer 4i with Portal db (oracle 8i).

  Connect to external databases by using links in the portal db db and reports will use the link db to retrieve data from views in external databases.

  External databases, we have been connecting is oracle 10g version and now we have improved these databases to version 11g.

  Now I have a created a new database link to this 11g database and I have created a new EUL in the portal to connect to this database 11g.

  But when I try to create a report using the discoverer of this new EUL after login for the discoverer we get an "Unable to connect to the database" error.

  We all have the privilege of necesscary to the user and the new database link works perfectly well. (when we try to query directly using SQL as database portal using this db link the query works perfectly).

  I'm not sure if it is a compatibility issue in accessing an 11g database since oracle disk 4i.

  Can any advise if this is the case and if there is no work around for this?

  Kind regards

  REDA

  You say that you are having problems with a link of database from 8i to 11 g (pl exact position of 4-digit versions)? If so, expect as database of links between these two versions are not supported. Is there a reason you can't pass the portal of databases of at least 10 g 2?

  See MOS Doc 207303.1

  HTH
  Srini

• The user equivalence test failed for user 'oracle '.

  Hello
  
  I try to install the Clusterware Oracle 10g as part of my RAC installation.
  I have configured in RHEL 4 to 2 nodes (rac and rac2). But when I run the runcluvfy utility, I get the error below:
  
  [oracle@rac cluvfy] $./runcluvfy.sh stage pre - crsinst - rac n, rac2
  Conducting due diligence to install cluster services
  Audit accessibility of node...
  Check for accessibility of node is passed node "rac".
  Verify the equivalence of the user...
  The user equivalence test failed for user 'oracle '.
  The test failed on the nodes:
  RAC
  CAUTION:
  Equivalence of the user is not defined for nodes:
  RAC
  Audit will proceed to nodes:
  Rac2
  
  The problem is that with the first node (rac). The second node passes.
  SSH works fine. Don't know what the problem is!
  
  Thank you!

  Have you set up SSH for the equivalence of the user?
  Or
  Did you establish the user equivalence?
  If Yes... Please check...
  $ ssh hostname rac
  RAC
  $ ssh hostname rac2
  Rac2
  You should establish the equivalence before user...
  exec/usr/bin/ssh-agent $SHELL
  / usr/bin/SSH-Add

  If you do not configure ssh for the equivalence of the user
  http://www.Oracle.com/technology/pub/articles/smiley_rac10g_install.html
  Or
  read the SSH user equivalence is not defined on the remote nodes

• Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.

  Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.  I tried all system tools and I get nothing and the only point of system restore in the restore SP1 update. not the best at the command line and even worse to system32 please help I need the laptop in return

  Hello

  1. when exactly you get this error message?

  2 are you able to boot into the office after getting this error on blue screen?

  3. don't you make changes to the computer until the problem occurred?

  I suggest you to follow the steps below and check if it helps.

  Method 1: Try to start your system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2 : If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: If the problem persists, then try to run the Startup Repair tool.

  Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Startup Repair: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

  Hope this information is useful.

• "Restore failed, error Code 1117

  I'm doing a system restore on a gateway nv 79 with the backup disc, I did when the computer was purchased.  I get all the way up to 86 percent brand and get "restore failed, error Code 1117, not able to perform due to an i/o error."  I can get nowhere excpet the F2 screen, so I don't know what the problem

  Hello

  ·        You did changes to the computer before the show?

  ·        You are able to boot to the desktop in normal mode?

  Method 1: If you are not able to boot to the desktop in normal mode then I suggest to start in safe mode with command prompt and run the disk check to the following address:

  CHKDSK X: /R

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Reference: Startup options (including safe mode) advanced

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Method 2: follow the instructions from the link to fix the problem:

  Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."

  http://support.Microsoft.com/kb/952272

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

• Error with Oracle data integration tool

  Hello

  I try to call a scenario odi since a package and I need to pass variables dynamically. the code is

  OdiStartScen '-SCEN_NAME = #v_ScenName ""-SCEN_VERSION = #v_ScenVersion ' '-SYNC_MODE = 1 "#v_AddlVariables".

  #v_AddlVariables organizes values for multiple variables.

  the code is to throw an error:

  oracle.odi.oditools.OdiToolInvalidParameterException: error when setting the parameters on the tool

  at com.sunopsis.dwg.function.SnpsFunctionBase.getCoreOdiTool(SnpsFunctionBase.java:618)

  at com.sunopsis.dwg.function.SnpsFunctionBase.getSunopsisApi(SnpsFunctionBase.java:494)

  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.executeOdiCommand(SnpSessTaskSql.java:1431)

  at oracle.odi.runtime.agent.execution.cmd.OdiCommandExecutor.execute(OdiCommandExecutor.java:44)

  at oracle.odi.runtime.agent.execution.cmd.OdiCommandExecutor.execute(OdiCommandExecutor.java:1)

  I tried to call the same command by replacing the variable (#v_AddlVariables) with its values and the code begins to work.

  the following goes to work when I give the values of the variables:

  OdiStartScen '-SCEN_NAME = #v_ScenName ""-SCEN_VERSION = #v_ScenVersion ' '-SYNC_MODE = 1 ""-.v_InterchangeId < PROJ_CODE > = 750 ""-< PROJ_CODE >. ' "» "v_FileName = BTRAIL1TRX01Aug201531Aug2015.csv" «-.v_filepath=/nfs/paldata/interfaces/emdw_landing/mycost/train_booking/incoming< PROJ_CODE >.

  
  

  
  

  Please help me solve this problem, as a similar code is already running in ODI 10 G. Can't understand why this gap in 11G

  
  

  ODI Version: 11.1.1.9.0
  

  Yes you are right, I found the solution so far. There is a problem with the analysis in ODI.

  Variable names are not any question (by variable names are case-sensitive in ODI 11.1.1.9.0)

  Solution:

  OdiStartScen '-SCEN_NAME = #v_ScenName ""-SCEN_VERSION = #v_ScenVersion ' '-SYNC_MODE = 1 "#v_AddlVariables".

  Here odi is not expected a variable, it waits for a command in the form of

  OdiStartScen "-SCEN_NAME = #v_ScenName" "-SCEN_VERSION = #v_ScenVersion '"-SYNC_MODE = 1 ""-= value .var_name ' "»

  so, I changed the format of the command to

  OdiStartScen '-SCEN_NAME = #v_ScenName ""-SCEN_VERSION = #v_ScenVersion ' '-SYNC_MODE = 1 ""-project_code #. "". " #var_name = #var_value.

  that is to put all my requirements for entry into the different variables solved the problem.

  ODI 11 G is really better understand some features that were already working in ODI 10 G. It's like finding the solution once more

• FMW: Portal upgrade to 11g - prepare OracleAS existing 10g: INTERNET_APPSERVER_REGISTRY. SCHEMA_VERSIONS &amp; PUBLIC. IAS_VERSIONS are not valid

  20/01/2011

  
  Reach
  http://support.Oracle.com [MOS]
  Dashboard |  Knowledge | Upgrade of advisors | Fusion Middleware portal to 11g upgrade |
  Configure | Check the Architecture meets the requirements

  "Prepare existing OracleAS 10g Architecture."
  Step 5. Search for disabled items in the database where the schema for Oracle Portal 10g
  RE: 14:02
  We have two invalid objects that would not recompile.   I'll open a SR?

  I tried recompiling them Toad and sqlplus.  SQLPLUS > display errors have shown no error

  Select the owner. » '||
  object_name | » '||
  object_type | » '||
  status
  of object
  When status = 'INVALID'
  order by owner, object_name.  2 3 4 5 6 7

  OWNER: "| OBJECT_NAME | "| OBJECT_TYPE | "| STATUS
  --------------------------------------------------------------------------------
  INTERNET_APPSERVER_REGISTRY SCHEMA_VERSIONS VIEW DISABLED
  INVALID IAS_VERSIONS PUBLIC SYNONYM

  http://download.Oracle.com/docs/CD/E17904_01/upgrade.1111/e10130/upgrade_classic.htm#FUPCL215
  said: the query does not return objects of database with a diagram of component of Oracle Application Server (for example, PORTAL, wireless and so on) in the column "owner".

  RE: I'm not sure that the db objects have a diagram of component of Oracle application server, but it looks like little that they could me.
  The view is a table of the components in the part.  And the fact synonym refers to the view.
  

  Hi Charlie
  Take a look at

  After the upgrade the management of identities of 10.1.2.0.2 to 10.1.4.2 INTERNET_APPSERVER_REGISTRY. SCHEMA_VERSIONS is invalid (Doc ID 557591.1)
       
  You have improved your IDM to 10.1.4.3 so (although the title speaks about 10.1.4.2 (I think that the problem addressed in the document of support applies to your situation. In short, the invalid view can be ignored - and goes the same for the synonym... IAS_VERSIONS... I think it is a synonym for the view - and therefore is too marked as invalid.
       
  If you are satisfied with this explanation please close this thread.

• REP-3000: internal error from Oracle Toolkit.

  Hi all
  
  We get below error when try to generate the report in XML format.
  
  XML_REPORTS_XENVIRONMENT is:
  ORCL/Oracle/ORA/8.0.6/guicommon6/TK60/admin/Tk2Motif_UTF8. RGB
  
  XENVIRONMENT is set to /orcl/oracle/ora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
  
  
  NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are:
  American_America.UTF8
  
  '.,'
  
  REP-3000: internal error from Oracle Toolkit.
  
  I can see in the context file that display value is set for the correct server name.
  
  I can access the simultaneous server using PuTTY.
  
  When I display the value
  
  
  $xterm
  xterm Xt error: can't open display: 10.1.7.160:0.0
  IP concurrent server - 10.1.7.160
  I can't on screen as I can access through PuTTY.
  
  Details of approx.
  
  Version of apps - 11.5.10.2
  Version of DB - 11.2.0.1
  OPERATING SYSTEM - IBM AIX 6.1
  
  Please suggest
  
  Thank you

  >

  I guess that is not the path. Do I have to create the directory/usr/tmp/XMLTEMP. Y at - it no doc metalink to set up the report for the XML editor.

  Thank you

  Fix. You must create this directory and ensure that the owner of the application (applmgr) is able to write in this directory. If you want to change this location to another directory, please see

  XML editor reports fail with java.io.FileNotFoundException on Temp Directory after cloning [1189764.1 ID]

  Thank you