The user equivalence test failed for user 'oracle '.

Similar Questions

• How to find the user oracle for a planning application search

  Hello
  I know how to take backup but I dnt seem to remember the user that I created in oracle to the planning application and there are many users that there are many applications on the sytem, how to know which is the user for a particular planning application
  Thanks in advance

  I would of thought you would name a name of data source with the same name as the planning application, it makes it a lot easier, the naming scheme of names with the same name also keeps everything the same.
  If you can not link the name of the data source for the name planning then you will need to look at the system of planning and HSPSYS_DATASOURCE and HSPSYS_APPLICATION tables, this allows linking by ID.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• confusion about the user oracle 12 c

  Hi gentlemen,

  I tried to install 12.1.0.2 on windows 7 x 64 struck but the choice of user oracle. I have gone through 12 c documentation but not clear about this.

  I tried to install the software with the Oracle user with admin privileges. I need to create another user for maintenance spare oracle?

  What are the differences between the two users?

  can someone clear me with a few simple words? Sorry for your time if my question is stupid

  Kind regards

  Cherry

  Hello

  The following link will clear your doubts...

  https://support.Oracle.com/MMOs/faces/UI/km/kmDocumentDisplay.JSPX?kmDocId=1529702.1&IDX=2&totalResultsDisplayed=10

  Rajesh.PK

• HP mini 110 cannot use recovery discs - BIOS insists the hard drive test failed. Drive works on another computer.

  My niece has a HP mini 110 that does not have a day. Do a check of the hard drive in the bios, it failed (7 on playback). I though I should get a new one so I ordered another. While waiting for that to happen, I had access to a usb SATA bridge and the opperating system was beyond repair and the unreadable disk from HP mini, I decided to try to repair the disk. So I reformatted the old disk using my desktop computer. Windows had no problem with the drive and it seems to work very well.

  I also had to order the recovery disks (intro to windows 7).

  In any case try to reinstall using the recovery via the DVD USB drive disks. It kept coming back with error 17 - I found a hard drive error. I also tried to install with a Windows XP installation disc and it was more explicit hard drive it said it had NOT installed it - or "it does not match the sheet material for unity" (or words to that effect)

  To get the new hard drive - the same problem. Even if both of these drives operate as USB connected to my main desktop drives. SO my conclusion is that the BIOS start inspect the hard drive, check the configuration of the formatting. that is the size and the partitions etc. and when they do not correspond to the idea of BIOS of good care he rejects the hard drive and finds it is not installed.  Or maybe to do some files on the hard drive of base. Whatever it is, the bios concludes that there is no hard drive and will always return a "failed" to the hard drive of the bios test.

  Any ideas on that? I need to know exactly which partitions are expected by the bios. Does anyone have these specs, or maybe you have a mini HP and can examine your hard disk and tell me the amounts of partition and the size?

  Unless I can get the bios to recognize the hard drive, I don't see how I can reinstall the operating system on it. Any help is appreciated.

  Thank you

  _______________________
  When it comes to fix computers the longest word in the English language is "JUST"... as in "you do just that and it will work" :-)
  _______________________

  HI David

  Well, I hope this is my last post here. I had already printed a return address for the recovery disks, being returned to the Netherlands. Just for the beggar of cast iron, however, I decided to try just once more would like to think that now that there is a kind of operating system on the hard drive it might work. But unfortunately still; no joy.

  All this time I would be considered may not be something wrong with the external hard drive because it was no problem to start the installation of XP. So I was just wondering maybe it does not receive enough power (it is a slimline portable DVD player that gets its power from a second usb) so I made a DVD player external adhock using an IDE hard drive enclosure (which has its own power supply and an old internal DVD burner I had put aside.

  To my surprise and joy; the HP mini started the recovery process. I am now watching reformat the windows partition and copy the files needed to restore the hard disk.

  So anyone with a similar problem to the HP mini not recognize the recovery disks is my advice; try an another external DVD drive, preferably one with its own supply of.

  Thanks for all your help and patience David.

• The components common install fails for Essbase Server in a distributed environment.

  Hello everyone, I am trying to install essbase server (V 11.1.2.3) on Red hat Linux 6, 64-bit. Already installed on Windows 2008 Foundation Services. Nothing has yet been configured. On the installation of Linux, the installation of common components to fail. I looked around, in forums and in Oracle Support (Doc ID 1360561.1) and it looks to be a known issue. We discussed that it is due to a small number of missing on the linux server RPM. But I couldn't find a definitive answer as to the exact package that it was, or if it is a problem of RPM in the first place. Could someone please shed some light on what exactly is causing the problem and what exact package is necessary. Thank you.

  BTW, this is the mistake of common-CMO - install.log

  **********************************************************************************************************************************************************************

  (July 2, 2013 11:53:33), install, com.hyperion.cis.OCMOracleHomeSetup, dbg/software/hyperion/EPMSystem11R1/ccr/bin/configCCR - r:

  STDOUT:

  STDERR:

  SH: / software/hyperion/EPMSystem11R1/ccr/bin/configCCR: no such file or directory

  Exit code: 127

  ***********************************************************************************************************************************************************************

  And this is the error in the installTool-install - stderr.log

  Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException

  at javax.swing.plaf.basic.BasicTreeUI.completeEditing(BasicTreeUI.java:2009)

  at javax.swing.plaf.basic.BasicTreeUI.completeEditing(BasicTreeUI.java:1974)

  to javax.swing.plaf.basic.BasicTreeUI$ Handler.valueChanged (BasicTreeUI.java:3637)

  at javax.swing.tree.DefaultTreeSelectionModel.fireValueChanged(DefaultTreeSelectionModel.java:629)

  at javax.swing.tree.DefaultTreeSelectionModel.clearSelection(DefaultTreeSelectionModel.java:570)

  at javax.swing.tree.VariableHeightLayoutCache.rebuild(VariableHeightLayoutCache.java:740)

  at javax.swing.tree.VariableHeightLayoutCache.treeStructureChanged(VariableHeightLayoutCache.java:626)

  to javax.swing.plaf.basic.BasicTreeUI$ Handler.treeStructureChanged (BasicTreeUI.java:3824)

  at com.hyperion.install.wizard.swing.FeatureTreeModel.fireStructureChanged(FeatureTreeModel.java:511)

  at com.hyperion.install.wizard.swing.FeatureTreeModel.fireStructureChanged(FeatureTreeModel.java:520)

  to com.hyperion.install.wizard.swing.TreeSelectionFieldSwingImpl$ 11.run(TreeSelectionFieldSwingImpl.java:311)

  at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)

  at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:641)

  to java.awt.EventQueue.access$ 000 (EventQueue.java:84)

  in java.awt.EventQueue$ 1.run(EventQueue.java:602)

  in java.awt.EventQueue$ 1.run(EventQueue.java:600)

  at java.security.AccessController.doPrivileged (Native Method)

  in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:87)

  at java.awt.EventQueue.dispatchEvent(EventQueue.java:611)

  at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)

  at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)

  at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)

  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)

  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)

  at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)

  Thank you

  Ted.

  This is because COM is 32 bit and requires glibc 32-bit packages.

  Try running

  yum install glibc - devel.i686 glibc.i686

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• problem running the session of remote debugging for specific oracle sql developer

  I have a problem running the session of remote debugging of sql server specific oracle developer.
  I get the following error:
  Connection to the database mmgrep - INNA.
  PL/SQL execution: ALTER SESSION SET PLSQL_DEBUG = TRUE
  Running PL/SQL: CALL the DBMS_DEBUG_JDWP. CONNECT_TCP ('inna.followap.com', '4029')
  ORA-30683: failure connecting to debugger
  ORA-12535: TNS:operation expired
  ORA-06512: at "SYS." DBMS_DEBUG_JDWP', line 68
  ORA-06512: at line 1
  Process is complete.
  
  
  I understand that Oracle is unable to connect to my PC.
  I have 2 different oracle servers to work with the sql developer. With one I can run debugger, with another - the errow above.
  I need to change to be able to start debugging with second oracle server.

  In tools | Preferences | ebugger, you can specify a range of ports for the debugger to use so you can limit it to those that are open on the firewall.

  And just to check, is the ip address that is displayed in the CONNECT_TCP call the right one for your PC?

• Why the 'Back' button often fails for the first time after moving to a new page to work?

  During further testing, I can repeat this bug every time: it happens when I clicked on a page background (focus it and allow scrolling arrow key). After having done this, clicking on the back button does not work as expected: don't not visually get "push the button" and the browser does not return to the previous page. Instead, everything on the menu (help, all file) becomes grey as if Firefox just lost focus.

  It almost seems like Firefox 7 has a 'smart' function to prevent accidental 'Back' presses, but if so, it does not work!

  Please let me know if you need more information about this bug.

  See:

  • http://blog.bonardo.NET/2011/09/30/is-your-firefor-freezing-at-regular-intervals
  • Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

  The default value of the pref Network.http.Max - connections has been increased from 30 up to 256 in versions of Firefox 6 +.

  Try to decrease the value of the pref Network.http.Max - connections 256-30 such as used in versions of Firefox 3.

  • https://support.Mozilla.com/kb/Firefox+never+finishes+loading+certain+websites

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• "the hard drive test failed.

  hard drive failed.  not found boot device.  Help!  I can not even anywhere to back up my photos...

  You will need to replace the hard drive with a new hard drive compatible. SSDS are also compatible with your laptop.  Source reference dm4 laptop maintenance & service guide

  

  You will need the game of recovery disks or recovery media that you did after you set your laptop.  The recovery media to recover the operating system and applications provided with your laptop on a new hard drive.

  You can buy a hard drive replacement to an online vendor or a PC shop.

• error of the user in cluvfy equivalence

  Hello
  
  I try to install 2 node RAC (RHEL 5 + oracle 10g)
  
  I had filled all the conditions to his subject
  
  stupid, I thought the user equivalence and checked by logging
  
  SSH rac1 rac2 GSU and date, it does not prompt for any password
  
  but after runing cluvfy before running Setup
  
  I said user equivalence failed for RAC1 but past 2nd node
  
  I followed the same procedure for both nodes
  
  can tell me, how should I solve this problem
  
  I had also re created dsa rsa keys and authorized keys, but the problem persists

  The user equivalence test failed for user 'oracle '.

• PRVF-4007: verification of equivalence for the user failed

  Hello everyone,

  I work a 2 node RAC installation, I installed CARS many times before, but I just ran the script with these settings

  runcluvfy.sh stage pre - crsinst - n rac1, rac2-verbose

  The last time I ran it I don't have these errors, but I think I used the user account name "oracle."

  but this time I'm using another account of Linux, you have to use the name real = oracle for the account name?

  
  

  The Linux account I use is not called "oracle".

  
  

  This is the error I get when I run the script...

  
  

  [oradest@rac1 grid] stage pre - crsinst - n rac1, rac2-verbose $./runcluvfy.sh

  Conducting due diligence to install cluster services

  Audit accessibility of node...

  Check: Accessibility of node of the node "rac1.

  Accessible destination node?

  ------------------------------------  ------------------------

  rac2                                  yes

  rac1                                  yes

  Result: Check accessibility node from node "rac1.

  Verify the equivalence of the user...

  Check: Equivalence of the user for the user "oradest".

  Comment by node name

  ------------------------------------  ------------------------

  Rac2 failed

  RAC1 failed

  Result: PRVF-4007: user equivalence verification failed for user 'oradest '.

  ERROR:

  Not available on all specified nodes user equivalence

  Verification can take place

  Check prior to the installation of cluster service failed on all nodes.

  Yes, you can use a separate account (e.g. "grid").  In fact, I always recommend a separate account, especially from 11 GR 2.

  Must user equivalence be configured.  It is documented in the installation guide.  You can use the installer universal to facility user equivalence if you don't want to do it manually.

  Hemant K Collette

• How to start the listener (LSNRCTL) under user oracle with Crontab JOB

  Dear all,
  
  I am able to start and stop the listener as the user oracle manually but I want to put it in the crontab to start automatically, I added to crontab, but it is a failure. I think I missed something.
  
  CRONTAB UNDER ORACLE USER LIST
  =================================
  Oracle > crontab-l
  start of /opt/oracle/product/9.2/bin/lsnrctl
  Oracle >
  =================================
  
  JOURNAL OF THE CRONTAB
  =================================
  Log tail #.
  root: CMD (nice-5 /opt/hlr/tools/backup/alarm.sh > / dev/null 2 > & 1): PID
  (23446): Sun 15 Nov 09:50 2009
  Oracle: CMD (start opt/oracle/product/9.2/bin/lsnrctl): PID (54386):
  Sun 15 Nov 09:50 2009
  Cron with pid: 54386 failed
  Cron with pid: 23446 successful
  Oracle: CMD (start opt/oracle/product/9.2/bin/lsnrctl): PID (71504):
  Sun 15 Nov 09:51 2009
  Cron with pid: 71504 failed
  Oracle: CMD (start opt/oracle/product/9.2/bin/lsnrctl): PID (62496):
  Sun 15 Nov 09:52 2009
  Cron with pid: 62496 failed
  Oracle: CMD (start opt/oracle/product/9.2/bin/lsnrctl): PID (44768):
  Sun 15 Nov 09:53 2009
  Cron with pid: 44768 failed
  ==============================================
  
  JOURNAL OF THE LISTENER
  ==============================================
  Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
  
  System settings file is /opt/oracle/product/9.2/network/admin/listener.ora
  Log messages written to /opt/oracle/product/9.2/network/log/listener.log
  Trace information written to /opt/oracle/product/9.2/network/trace/listener.trc
  Trace level is currently 0
  
  Started with pid = 27446
  Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp (PORT = 1521)(HOST=129.9.101.193)
  )))
  
  TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
  
  TNSLSNR for IBM/AIX RISC System/6000: release 9.2.0.7.0 - Production on 15-NOV-2
  009 09:43:09
  
  Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
  
  System settings file is /opt/oracle/product/9.2/network/admin/listener.ora
  Log messages written to /opt/oracle/product/9.2/network/log/listener.log
  Trace information written to /opt/oracle/product/9.2/network/trace/listener.trc
  Trace level is currently 0
  
  Started with pid = 71428
  Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp (PORT = 1521)(HOST=129.9.101.193)
  )))
  
  TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
  =====================================================

  Hello

  For example on HP - UX, you can try something like this:

  / usr/bin/su - oracle - c "start /opt/oracle/product/9.2/bin/lsnrctl" 2 > & 1

  On AIX I don't think that the syntax is very different.

  Hope this can help.
  Best regards
  Jean Valentine

  Published by: Lubiez John Valentine on Nov 15, 2009 09:22

  Published by: Lubiez John Valentine on Nov 15, 2009 09:25

• Permissions for user Oracle vRM

  People,

  The permissions that are required for the Oracle user vRM?

  Thank you

  Cormac

  The user oracle, at least should be GRANT-ed the roles/privileges to follow:

  • "CONNECT".

  • CREATE PROCEDURE

  • CREATE TABLE

  • CREATE VIEW

  • CREATE THE TRIGGER

  • CREATE THE TYPE

• How to authenticate the user using oracle user

  Hello
  I do some piece of my apex application login authentication and what I want to do is to let people connect with the user Oracle (schema) and the password also, in the system. I know that we have a dba.users table that contains the usernames and respective encrypted passwords for users of Oracle. But using this table is not the right way for my solution. Is there another way I can authenticate the user if he uses the username/password Oracle (as sys/respective password)?

  Hello:

  You might want to consider 'DAD authentication' for your application as described here

  http://download.Oracle.com/docs/CD/E14373_01/AppDev.32/e11838/sec.htm#CHDJBAIF

  CITY

• communication error with the server. callback failed for the data entry page

  Hello
  
  We have recently applied the corrective update EMP on EMP 11.1.2.0 111.2.1.
  We have following the architecture,
  
  database server: sql server 2005
  Server Foundation (OS = windows server 2008): HSS, EPMA, Manager Calc, EAS, EIS, provider's server, planning
  Essbase Server (OS = windows server 2008): essbase
  
  After you apply the patching EMP 11.1.2.1, we apply after Electrodes for IE 9 compactibility i.e EMP 11.1.2.1.600 patches
  
  1. patch 14119724 (Workspace)
  2 14142678 patch (Shared services)
  3 patch 14224664 (EPMA)
  4 patch 14464109 (planning)
  
  After you apply above patches, all users get error when opening planning web form through the workspace of all client computer.
  
  "* error communication with the server. callback failed for the data entry page. "
  
  
  
  
  When restore us only planning patch 14464109 , issue of "communication error with the server. callback failed for the data entry page "get resolved for all users, but failed for a single user IE"user xyz" "
  
  the user xyz have OS = windows 7 and IE 8
  user xyz can take foundation server RDP can open any form of planning successfully in vain get when doing the basic machine.
  
  I have following question:
  1. Why do we get error "error communicating with the server. callback failed for the data entry page"after you apply the fixes to IE9
  
  2. after cancellation all patches or planning one patch, why the user xyz always get the error but not other users
  
  
  Thanks in advance
  
  Published by: 922755 on June 7, 2013 16:08

  It might be useful to have a read of the following doc Oracle Support - "error:"error Communication with the server. " "Callback failed for the data entry page" when you open a Web form of planning with the members of the Type of text [ID 1392689.1].

  And then this question should be resolved en.600

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• ORA-12154 as user oracle, Pentecost root account, it works very well

  Hello
  
  I have a problem with a client installation, if I try to connect to the database. I have the following configuration:
  
  1 database: running on an Ubuntu Jeos VM, Oracle 11 g (11.1.0.6.0 version 64 bit)
  2. customer: running on a CentOS 5.2 VM, Oracle 10 g Linux 32-bit Client
  
  I have configured the tnsnames.ora and stored in the directory of $ORACLE_HOME/network/admin. The content of the tnsnames.ora file is the following:
  ORCL64 = (Description = (ADDRESS_LIST = (Address = (Protocol = TCP)(host=192.168.12.128) (port = 1521))) (CONNECT_DATA = (SID = ORCL)))
  
  If I try to connect to the database as the user oracle with the following command sqlplus SYS@ORCL64 AS SYSDBA, I will get the ORA-12154 TNS: could not resolve the connect identifier specified error message. If I try the same as the root user, it works fine and I can make the connection. I have the same result if I try the command tnsping ORCL64. As user root the tnsnames adapter can resolve the alias, as the oracle user this appears not possible and I will get the error message: TNS-03505: failed to resolve the name. In both it uses the setting from the file u01/app/oracle/network/admin/sqlnet.ora. The content of the sqlnet.ora file is the following:
  NAMES of . DIRECTORY_PATH = (TNSNAMES, EZCONNECT).
  
  Do you have any suggestions how can I solve this problem of having a connection with the oracle user.
  Thanks in advance
  Sven

  user10252169 wrote:
  Hello

  Thanks for your replies. On the CentOS machine, where the client is installed, there is no directory $ORACLE_HOME/bin/oracle and $ORACLE_HOME/bin/lsnrctl. The output of the $ORACLE_HOME/network/admin / * ora is:

  -rw - r - 1 oracle oinstall 171 28. Apr 21:25 /u01/app/oracle/network/admin/sqlnet.ora
  WX - 1 root root 118 5. May 11:33 /u01/app/oracle/network/admin/tnsnames.ora

  The 'client' reads the tnsnames.ora to determine where the database. Looking at t he above, you have a configuration in which the user name only client able to read the tnsnames.ora is the root user. Which means that you have run the netca or netmgr as root.

  Change the tnsnames.ora to provide the appropriate, perms and then try again.