command line delete vpn

Similar Questions

• Command line configuration Client VPN for UC500

  Hi all, I have a Cisco UC500 on a site and I need to set up the VPN Client for users remotely in. The Configuration Wizard has an easy however, it errors when trying to save it. Dangerous than the external interface error has been partially configured via the command line.

  So I would try to set this up via the command-line, however, I can't find any doc about all this that I find are for routers, ASA and PIX. Have a walk through this set up via the command line?

  Thank you

  Dan

  Configuration of the VPN Client on UC500 is the same as the router. You can use the example of the configuration of routers.

• How can I make and delete a snapshot of the command line in ESXi 4?

  How can I make and delete a snapshot of the command line in ESXi 4?  ghettoVCB4i does, but I need unusual behaviour for two virtual machines.  I need to be able to save only one of the two virtual drives, not both.  So I can't use this script here.  I need to write a script that will:

  1 copy off the .vmx

  2 make a snapshot of a virtual computer running

  3 use the vmkfstools command to clone the vmdk in the backup location

  4 remove the snapshot.

  The snapshot is the part that I do not know how.  I do not see a flash drive in vmkfstools and I do not understand the snapshot code in ghettoVCB4i.

  Thank you!

  vmkfstools is a tool for working with VMDK, has nothing to do with stereotypes. In the Busybox unsupported console, the only tool that you can use for some of the management of the virtual computer is vim-cmd , which is about a wrapper for VMware vimsh, take a look at our site for more information: http://engr.ucsb.edu/~duonglt/vmware/#vmware_vimsh

  Basically, you're going to do something like the following:

  vim-cmd "vmsvc/snapshot.create XXXX FIRST_SNAPSHOT MY_FIRST_SNAPSHOT_1"
  

  where XXXX is VmId to the virtual machine that is retrieved from vmsvc/getallvms, then you are going to deliver the snapshot.remove

  Here are some other useful commands dealing with snapshots:

  Vim - cmd vmsvc/snapshot.removeall \[VmId]

  [[[vim - cmd vmsvc/snapshot.remove \[VmId\] \[removeChildren\] \[snapshotLevel\] \[snapshotIndex\]

  Vim - cmd vmsvc/snapshot.get \[VmId\]

  ghettoVCB4i uses vimsh to do these things as well.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• Add and delete new hd, vocation with command line

  Goodmorning,

  I have a problem,

  I know how to create a vmdk or Rdm, but I don't know

  If "can hang on these new devices from the command line without turning off - suite"

  the virtual machine

  The command vmware-cmd and vmkftools is not the info on it.

  Thank you very

  Ivan Venga

  It can be on any windows box. This is a Toolbox for the ESX host and Virutal Center functions.

  http://www.VMware.com/beta/vitk_win/

  Overview

  The Toolbox VMware Infrastructure (VI) (for Windows) 1.0 includes more than 120 cmdlets, a set of sample scripts and a library of functions that make the management and automation of the VMware Infrastructure easier than ever.

  The VI Toolkit (for Windows) is a tool of command-line and script based on PowerShell that provides a useful feature for virtual infrastructure management.

  Its use

  The first thing you should do after the launch of the kit of VI (for Windows) is to have a connection to a VirtualCenter or ESX Server. To start, call the Connect-VIServer cmdlet and specify IP address or DNS of your vCenter server or ESX, the Protocol (http or https) name, username and password.

  SE connect-VIServer-Server 10.22.36.36 - protocol https-user admin-password mypass

• Firefox command line option 'no-remote' launches a redirection of spam

  I set up multiple profiles in Firefox. I want to be able to run multiple profiles at the same time, so I created the shell script to start each profile; example:

  nohup /Applications/Firefox.app/Contents/MacOS/firefox Pei User01 no remote > / dev/null 2 > & 1 &

  When I do that, I get the following pop - up. The endpoint may change, but the section of domain.domainggateway.com that seems to start forwarding appears every time.

  http://11165504-364378.domain.domaingateway.com/redirect?o=0 & y = 0 & x = 0 & r=http%3A%2F%2Fpdamv.bidsystem.com%2Fppc%2Fclick.aspx < deleted long chain - c >

  I have narrowed down in determining that this will happen only when I use the option 'no-remote '.

  I suspected that I had malicious programs from a Plugin. So I carefully and completely uninstalled Firefox, twice. Yet both times I kept getting this pop-up when you start by the above command. I have not found a solution.

  I now suspect some lance this code lies in the official download of Firefox, but I don't know how to dig into that one more away. Ideas on how to figure out where it comes from and how to fix?

  Mac OS - X 10.10.5
  Firefox 4.0.0.3

  Thank you

  'Re missing you the main hyphen before '- no - remote', if Firefox thinks you want to open the remote Web site no.

  • https://developer.Mozilla.org/Command_Line_Options
  • nohup /Applications/Firefox.app/Contents/MacOS/firefox-aucun-distance Pei "User01" > / dev/null 2 > & 1 &

  You can add - no.-distance to the command line to open another instance of Firefox with its own profile and run multiple instances of Firefox at the same time.

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
  • https://developer.Mozilla.org/Mozilla/Multiple_Firefox_Profiles

  Note that you can not open external links in a Firefox instance started with the - non-interrupteur remote, usually it is recommended to launch default profile without the - No.-remote switch unless you are never to open external links (by clicking on a link in an email) in Firefox.

• How to reset Firefox from the command line (without a mouse) on Linux?

  I use Firefox for automated desktop screenshots xvfb virtual. There is no mouse. So I need to reset Firefox from the command line. Uninstall a re - install led again to the window "reset".
  I use Ubuntu Server Edition 13.04.

  Otherwise, without a keyboard and a mouse, you can just reinstall and delete. / mozilla folder.

• I get a message: to use the 'java' command line tool, you must install a JDK.  I tried 10 times to install without success.  Help, please.

  I get a message: to use the 'java' command line tool, you must install a JDK.  I tried 10 times to install without success.  Help, please.

  You probably have some of the older than the needs/desires software legacy Java installed.

  Please see these sons of community message:

  After the installation of El Capitan, I get the message: to use the 'java' command line tool, you must install a JDK

  Just found this last Java does not work with El Capitan

  This is the Apple link to the legacy version of Java 6.

  Download Java for OS X 2015-001

  First of all, I would like to try to identify what application generated the next message and update (delete) this request as the case may be. If you need to run Java then, as the Apple Support page says it's certainly preferable that your installation of Java entirely up-to-date with the Oracle's Java course. If you can get without Java, you should install it not - like the Flash, it should not be installed unless you have no choice.

• Read command line arguments to TestStand sequence start, moving within the sequence

  Start a sequence by using a batch file and add command line arguments. Example: "MySequence.seq Arg1.

  Now, within the sequence I want to read this first (and another) argument "Arg1".

  There is a stage in the ActiveX for that, giving a type (object reference) channels, see screenshot.

  Question: How to use this reference to read the argument?

  Honestly I don't think that you are using it correctly.  I think that your application in your UI Manager must handle this.  However, to answer your question:

  According to the TestStand help CommandLineArguments property is of type string.  It comes to aid of TestStand as well:

  Channels
  A collection of strings. You can get a reference to the collection of the ApplicationMgr.CommandLineArguments property, the ExpressionEdit.GetValidEvaluationTypes and ExpressionEdit.SetValidEvaluationTypes methods and the ApplicationMgr.ProcessUserCommandLineArguments event.

  Properties
  Count (read-only)
  Agenda

  Methods
  Add
  Claire
  Insert
  Delete

  Looks like you can use activeX not use Count or properties of the element to retrieve a single argument.

  Hope this helps,

• Follow-up of command line question

  Earlier today, I asked for advice on how to remove a troublesome file using the command line.

  When I opened the command prompt, it is set to c:\Documents and holder

  I tried led annoying file

  The command prompt said not found

  However, my embarrassing is a record in the E:\  CD player (file waiting to be written on the CD)

  Please indicate how do to the E:\  Command line CD player.

  Thank you... I am confident that I'm getting closer to delete this file!

  Forget to e.  The file is not on E, it's on your hard drive (C) waiting to be burned (written) on a CD (that will E).

  When you have done the research and found the file, what happened when you selected (clicked once on) the file and you press the delete key?

  If for some reason you can't use the graphical interface (for example, Windows Explorer) to remove the file, open a command prompt.

  [Press ENTER after typing each orders]

  The prompt (as you noted)

  C:\Documents and holder

  Local parameters of type cd

  The prompt now show you C:\Documents and Settings owner

  Application of type cd data

  The prompt now show you C:\Documents and Settings\Application Data of owner

  Type cd Microsoft

  The command prompt now shows C:\Documents and Settings\Application Data\Microsoft owner

  Type cd CD Burning

  The command prompt now shows C:\Documents and Settings\Application Data\Microsoft\CD Burning owner

  Type dir

  You should get a list of all files in the directory of CD burning. Most likely, your annoying file is listed.  Led type followed by the file name.

  You could do all this in one step, of

  C:\Documents and holder
  
  Type cd "C:\Documents and Settings\Application Data\Microsoft\CD Burning owner"

  The quotes may or may not be necessary (I don't remember at the moment), but should not hurt to have them.

• How to remove a shortcut with the command line?

  How to remove a shortcut with the command line?

  How to make a backup of the local users and groups with command line?

  You delete a shortcut, just as you would remove any other file.  A shortcut will end with the extension ".lnk".  So assuming you are trying to remove the shortcut named "Shortcut.lnk" which appears to the user 'Bob's Office, you use the button Delete (del) or 'clear' command by specifying the full path to the file.  (Remember to put filename in quotes if there is a space anywhere in the path or name) as in:

  del "C:\documents and settings\Bob\Desktop\Shortcut.lnk".

  What kind of a backup 'users and groups' you want to do?  If there is a backup of the users and groups as written in the registry, a good registry as C:\WINDOWS\ERUNT backup program that will make the command line.  If you are trying to backup all users and their data as well, then you are better off with a backup program.

  HTH,
  JW

• Need help to remove the files of the United Nations necessary for the command line

  Original title: DELETING FILES

  I have a large amount of support .png files that have been placed on my C:\ drive, by some malicious programs or the system.  Whatever it is, I want to remove them because they take a disproportionate amount of space (about 25 GB to an indicative value).  They are in a sub-sub-sub etc directory and appear to be copies of random images as advertisements for computers, cars, soccer players and goodness knows what else, since every time I try to see, explore stops at halfway through, due to the large amount of files.

  So my question is: is there a way to delete these files without the help of Windows Explorer, for example by using a command line? or is there another utility of file management that I could use?

  I would appreciate help on this.

  Start > type CMD

  Right click on CMD and select run as administrator

  You type the command DEl as written in the link I mentioned earlier.  Just make sure that you type the location of the file and names as you see them on your system.

  This is another article about the MS BACK Del command

  http://www.computerhope.com/delhlp.htm

  Edit: This may be temporary files from Web pages, that you have seen.  Try this before you use the DEL command.

  Tools > Internet Options > general tab

  Click on delete

  Uncheck data Preserve favorite

  Check all the other available options

  Click on delete

  Windows will remove these temporary files

  Click Ok

  Then, go to start > my computer

  Select the C drive

  In search type *.tmp

  This is more temporary files stored on the computer

  Press Ctrl + A to select

  Press DELETE to remove all the

  You may receive a message file is in use, press on ignore

  Empty folder cookies as well - C:\Users\username\cookies

  Do not delete the file; all content

  I forgot to add.  Once you type the command del, press ENTER to execute it.

• ASP set of command line

  Hello

  Anyone is able to change the values of the ASP for the command line (or groovy), I want to change a large number of selected agents.

  A previous post talks about using asp: together, but looking at the option of the command cmd - fglcmd.sh there isn't like asp: together.

  Another option that I have that is not perfect because it will take a manual step, is if I could define tags agent from the command line and then change groups, everyone does it?

  See you soon

  Andy

  example of another post - /opt/foglight/*_FMS/bin/fglcmd.sh - fog usr - pwd fog cmd - asp: together - agentId - configName SQL2005 - keyName InstanceName-value

  ./fglcmd.sh - usr pwd - xx xx - cmd commands

  Agent:

  activate active agent.

  clients display a list of known clients.

  clientupgrade upgrades a remote clients.

  Create creates an instance of an agent.

  Disable disables an agent.

  Delete Deletes an agent.

  deploy deploys an agent.

  GetLog retrieves a specific agent to log file.

  list displays a list of known agents.

  newspaper displays a list of agent log files.

  Packages displays a list of packages available agent.

  SetSchedule assigns a blackout schedule to an officer Foglight.

  showschedule displays a list of schedules of blackout attributed to agents.

  Start starts an agent.

  Stop stops an agent.

  types displays a list of the agents known by the name of the agent host.

  cartridge:

  Disable disables a Foglight cartridge installed.

  enable activates a Foglight cartridge installed.

  Install install and activate a Foglight cartridge (on by default).

  list of all installed Foglight cartridges.

  uninstall Uninstalls a Foglight cartridge.

  License:

  import installs a license.

  list displays a list of installed licenses.

  Remove Removes a license.

  Migration:

  agent to migrate a 4 Foglight agent instance.

  cancel the task migration Cancel that are planned or underway.

  createhostalias create a host alias 5 foglight for a host Foglight 4.

  data migrate the data collected for an agent instance Foglight 4.

  DCM migrate a DCM Foglight 4.

  items in the list all elements of a given Foglight 4 server migration or all servers registered Foglight 4.

  listhostalias list all alias host 5 foglight Foglight 4 guests.

  Get status and migration of the newspapers associated with an element of migration log.

  Refresh refresh a Server 4 Foglight recorded to reflect changes on the server.

  Grid Server 4 Foglight for migration.

  removehostalias remove a host alias 5 foglight for a host Foglight 4.

  unregister Unregister a Server 4 Foglight recorded (already migrated items will not be affected).

  Schedule:

  list displays a list of all the annexes Foglight.

  script:

  Run executes a script.

  Security:

  assigngroup assign a user to a group.

  assignrole assign a group to a role.

  CreateGroup Create a group.

  CreateUser to create a user.

  DeleteGroup remove a group.

  DeleteUser removes a user.

  exportldapcfg LDAP integration in the export settings.

  integration of LDAP Import importldapcfg settings.

  list security artifacts.

  support:

  Bundle creates a support group.

  ClientBundle creates and get a bundle of a client to delete support.

  topology:

  blackoutobject assigns a calendar of blackout to topology or objects.

  electricity lists all assigned to objects of topology power cuts.

  util:

  ConfigExport exports Foglight monitoring policy.

  ConfigImport matter a Foglight political control.

  display approx. Foglight Server configurations

  metricexport exports metric observations by request.

  Topologyexport export topology object's properties.

  uiexport exports a WCF module.

  uiimport matter a WCF module.

  UIList displays a list of the deployed modules of WCF.

  I found an environment to test this script in.

  I discovered that there was a mismatch between the ' / monitoredHost/name "used by the agent of systeme_windows and the virtual 'name' machine, which this script assumes must match.

  Adjust the gap, I changed:

  /vmName = val.get("name").toLowerCase)

  TO:

  vmName = server. DataService.retrieveLatestValue (val, 'dnsName')? value?. toLowerCase()

  After you make this change, the script worked are expected. Note that not all the virtual machines in my test environment had a "dnsName" (where the ""? "to protect themselves against the null value"), if this method can not be infallible.

  Kind regards

  Brian Wheeldon

• How to remove the old drivers (hidden) command line?

  Hello

  I want to try to remove all the hidden command prompt devices. There is a way to this topic?

  For example;

  type driverquery on cmd and sort all the lists of hidden devices

  After that type Remove any device (for example) and remove this hidden device

  Thank you.

  Enbiya salvation,

  Thanks for posting in the Microsoft Community.

  You can manually remove hidden devices by following the steps below.

  1. press the key Windows + X key, then select "Device Manager".

  2. from there, select the view > show hidden devices.

  3. now, select the hidden device > right click and select "Uninstall" to permanently delete or 'Disable' to disable the device.

  To find the command prompt commands and settings command line of how to do the same with the command prompt, you can follow the link below and check if it helps.

  Windows Device Console (Devcon.exe)

  https://msdn.Microsoft.com/en-us/library/Windows/hardware/ff544707 (v = vs. 85) .aspx

  Please let us know if the problem is resolved or you need additional assistance.

• Configuration of the Simulator. How to change default command line?

  Hello

  BlackBerry Java plug-in
  Version: 1.1.2.201004161203 - 16

  Windows XP

  How can I change default command-line for the Simulator?

  I want to delete/keep-lcd-on = true parameter because he throws:

  Internal error - BlackBerry Smartphone Simulator
  ------------------------------------------------
  (Class fledge::Exception) unhandled C++ exceptions:
  Unknown option LcdCollection:keep - lcd-on screen in the command - line.conf

  Thanks to advice.

  This parameter is no longer supported by the BlackBerry smartphone Simulator.

• Options command line for Windows 7 - root set of explorer.exe

  I've seen the advice that the old syntax WinXP works but I can not put the root of the view.  The desired folder appears but [in the left pane] all unwanted folders appear also [e.g., Favorites, libraries, all other folders for the user, network] which severely complicates the view, especially once I have develop subfolders in the folder desired.  In Windows XP, the part of the root of the activated syntax look at a just the folder and its subfolders [so that the left pane just to show my documents in the left pane for example].  Simple representations of WinXP can be created in Win7?

  Which is not clarified your original intention; I see now that you were recommending "the new paradigm" rather than offering a way to recreate the previous.

  As for me, I only occasionally used far the paradigm of wire of Ariane and never as a total replacement for the navigation pane.  I guess I'll have to turn off the pane for a while and see how the breadcrumbs affects my workflow.  I've been very heavily dependent on the visual appearance of the component and be able to see the hierarchy and relationships... but on the technical information is also available in the bread crumbs, but not as visually complete.  We'll see.

  As an addendum, it is worth noting that, despite this overhaul two times you mentioned, Explorer still apparently accepts all the original XP - era command-line switches, as / root, even if they have no relevance and seem to be ignored.  If the switches is nothing more do, then for gods sake why not to delete and generate a warning or polite error?