Command line reference Server?

Similar Questions

• 0xc000000e - Windows Home Server 2011 - how to open the repair or the command line option

  Hello

  I currently have the problem that my Windows Home Server 2011 stops booting with the 0xc000000e error code.

  Of course, I searched the web and found the following article:

  https://support.Microsoft.com/en-us/KB/2261423

  Can I boot from my installation DVD. "Windows loading files.

  While two options:

  -new installation

  -repair

  I click on repair. The next screen prompts to choose a restore image. ???? No other options or possibilities. No command line, nothing.

  OK boot with F8. Start menu. No repair option. Only "safe mode with cmd. Tried this. Then download the same GUI as before. Same two options. No CMD and taxation not possibility to use STARTREP. EXE.

  Any suggestions?

  Thanks in advance.

  Alexander

  Hello

  Your question is beyond the scope of this community.

  Repost in Windows Home Server Forums.

  https://social.Microsoft.com/forums/en-us/home?category=WindowsHomeServer

  See you soon.

• Is it possible to make Internet connection sharing by the command line rather than the GUI on Windows Server 2008?

  Hello world!

  I need program/reset sharing Internet connection by the command line rather than GUI tools under Windows 2008 Server (could be a .cmd to run startup script or the programmer). Is this possible? Or there is some registry keys I need to set/restore and restart some services?

  Thank you very much.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Server on TechNet. Please post your question in the TechNet forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• WinRAR command line tools do not check an executable Windows Server 2012

  Hi all

  I have developed a VI in LabVIEW 8.6 using WinRAR command line tools (passed in the Exec.vi system) to archive data that takes place on 5 different computers on a network and stores on a server .rar files.  Executable file of the VI works perfectly on my computer (WinXP) development.  The data from each of the 5 machines are archived and .rar files are stored on the server.  However, when I move the executable on the server where the .rar files will be stored and run the executable file, the command window flashes on the screen as if WinRAR commands are running, but no data is archived on the server.  No errors are passed out of the Exec.vi of the system.  The server's operating system is Windows Server 2012 and I placed the Rar and UnRAR .exe in the folder system32 on the server.  The server firewall is disabled, and he is able to explore at the location of the data to arhived.  The server is logged in as a domain administrator account.

  Here is an example of one of the commands in command line that I spend in the Exec.vi system:

  cmd /c rar a - m5 \\selsacn11\viscom\selsvis01\15\07\20.rar \\selsvis01\Rep0\Archiv\15\07\20

  When I manually type this command in the command line on the server, the data is stored properly.  The problem occurs when I run the executable on the server.

  I tried to work around the problem by creating a batch of files containing the command above, then using the Exec.vi system to call this batch file.  Yet once, when I manually run the batch file, it works correctly, but when Exec.vi system in a LabVIEW executable file runs the command on the server file, I get the same result as described above - no data are archived on the server.  This batch file works on my development computer and on my laptop to the company.

  My only thought is that there is a problem with the access rights.  So far, the executable works fine on an older server (Windows Server 2003), the development computer (Win XP) and my laptop (Win7) company, but the executable archive not the data on the Server 2012 server or on another computer running WIndows 7.  I have all these machines connected under the same domain administrator account, but COMPUTER networks are certainly above my head, so I wanted to check here if anyone has seen this problem with WinRAR or the Exec.vi system.

  Thanks for any info!

  Success!

  Darin, I took your suggestions and after some more fighting with him, I have an error Code 2 on the Exec.vi system.  This led me in search of the forums where I fell on the following:

  http://forums.NI.com/T5/LabVIEW/problem-using-quot-MSG-quot-command-with-quot-system-exec-VI/m-p/153...

  Of course, all the machines that had been able to run the executable file are 32-bit.  All the machines that could not run the executable are a 64 bit system.  I placed the Rar.exe in the C:\Windows\SysWOW64 folder on the server and it works exactly as expected today.

  I fought with this for weeks, so I'm a little disappointed that it was something so simple, but I'm very happy to have finally work!

  Thank you all very much for the help!

• deploy a virtual machine for the model stored in EXSI server via the command line

  Hello

  Is it possible to deploy a vm from a template stored in exsi server via the command line?

  The structure is shown in the attached picture. I want to deploy the model under "Templates" folder to a virtual machine "VM" sub-folder by command line of any machine.

  

  Hello

  PowerCLI can help you achieve this goal. Using PowerCLI, you can deploy remote host model.

  Here is an example for the same.

  http://www.harryjohn.org/deploy-multiple-VMs-from-template/

• How Windows Server backup and command-line tools are used in the installation of vCSHB?

  How the Windows Server backup and command-line tools are used during the installation of vCSHB?  It takes in all types of deployments (PtoV, VtoV, PtoP)? It is used to create files that are put in file sharing for the second node to use during the installation of vCSHB or is it only used during a clone of vCSHB of a physical to physical deployment operation?  These tools are not used in some deployments?

  You need backup Windows Server installed on the source and destination, and during the installation of vCSHB the installer will call the wbadmin (Windows Server Backup Utility) and will save the configuration and application data (application data is optimal, but can reduce the synchronization time after the installation of the secondary node). On the secondary node you will should only run the vCSHB Installer and everything will be restored.

  Check this blog entry for some info on P2P deployment issues: http://www.vcoportal.de/2013/12/vmware-vcenter-server-heartbeat-restore-on-a-second-node-a-journey/

• command line to start the application server (8.50) under Unix

  Hello
  What is the command line to start the application (Tools 8.50) UNIX server?
  
  OPERATING SYSTEM: AIX 6.1
  Tools: 8.50
  
  Thank you.

  You can run 'psadmin-help' to get all the options available in the command line.

  Nicolas.

• From server managed by using the Node Manager command line

  Hello
  
  I have configured the Node Manager and it is connected to the administrator of the server without problem. Now, I wanted to start the server managed through the console but it is a failure and my guess is that the syntax of the command line used is not correct.
  
  My question is, how do I change the command line used to start the Node Manager-managed server? I try to use the configuration tab start the server and it seems that does not. I also try to update the file .properties for the managed server.
  
  Whenever I look at the managed server logs, it gives me this line...
  
  NodeManager > < start WebLogic server with command line: <>...
  
  The command-line in newspapers aren't what I put in the .properties file or on the Server Start tab. She is from somewhere and I don't know where. I just want to set up the command line Node Manager uses to start a managed server.
  
  If all goes well, I'm clear with my problem and someone might be able to help. Thank you.

  You can try to follow the Option-2) mentioned in the link below: http://jaysensharma.wordpress.com/2010/03/26/nodemanager-based-managedservers-setting-mem_args/

• How to install a local help for the tools of cmd.exe and command line on Windows 7?

  Hello

  for many applications, the command line (cmd.exe) is a good choice to get results with minimum effort. The shell has continuously been improved over the years, at least until Windows XP.

  All the command line tools have a short help screen (using the /? option). When you need more information, you use Windows system for example from the Explorer Help. It is very good.

  Now, Windows XP Help content was installed on site, and the operating system. In Windows 7, my computer wants to go to the Microsoft web site on the internet and there is no local help available. The operating system seems to be incomplete. This makes the help system unusable on a computer without internet access or when the server is not accessible.

  So my question is: is it possible to install a local copy of help for the tools of cmd.exe and command line under Windows 7 or do we have to go back to Windows XP?

  Thank you

  Martin

  Download it directly from Microsoft - Windows Command Reference

• How to create a command line user

  I have a *.sql file. The content of this file is as follows:
  
  create user newuser identified by eu1;
  grant resources, connect to newuser;
  commit;
  
  I want that user that can key in user name entry and password in the command line. How to do this?
  
  If I want to put this *.sql who can read the content of another text file. For example, the text file has following: tracking, webUserPassword
  How to change the *.sql?

  1. no need to hire some DDL statements.
  2. use &, for example:

  create user & username identified by & password;

  Or look for the "accept" in the SQL command * over the reference of the user.

  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14357/TOC.htm

• Update to the ARD El Capitan command line

  I use the ARD to manage a growing number of Mac on a single network.  I'm up to 40 now and I'm looking to upgrade the existing installation of Yosemite to El Capitan.  I googled high and low and can't seem to find an answer - the question is-

  With the help of the ARD-tools (installation and unix command line, etc.) is there an effective or recommended to upgrade all 40 machines without having to touch each?

  ARD is really updated the operating system as possibly other related - including applications Apple components. There is a major difference between the upgrade and update and if you tried to use ARD to the upgrade you would effectively disable the client ARD, stopping the upgrade.

  There are a number of ways to all of your mac estate 'upgrade' without needing to touch each one, and most will involve having a NetInstall/NetBoot server on your network. TheNetBoot Service comes with the.app that buy you from the App Store. All methods will be asked to download the installer from El Capitan first. It's to you how you want to go about this, but using the network, but also the OS X Server to deploy the upgrade, as well as the wealth of other services and tools available once you move to the server can be a little too far - no insult intended - for all of your skills? If this is the case for you then maybe simply by downloading the installer once, the cloning of an external hard drive (or a number of external hard drives) and to upgrade as it would be best for your situation?

  Apple gives the the terminal commands for the creation of a bootable El Capitan installer in this article:

  Create an installer for OS X - Apple support bootable

  Tony

• Windows of different sizes from command line

  Hello

  I'm running Firefox and - width - height of command line options. The problem I have is that these settings are ignored if a Firefox window is already open. In this case, all of the following windows are open with the size of the first (original) window. It does not matter what I type for width and height. These parameters are used only for the first window, when Firefox is actually started.

  I've mitigated it wrong before with javascript used in web pages to resize the window to the document load event. Now I have to upgrade to the latest version and resizeTo does not work on windows that are not open via window.open.

  What are the options I have to open multiple windows of Firefox with different sizes? They all use the same profile.

  We use a very specific environment, closed and controlled with a web server and not internet access. There was no need for update of Firefox 4. Now, we want to upgrade, but this change in functionality prevents us from the upgrade. Because the computers of our customers are on CentOS 5, we would be upgrading to Firefox 17 which is part of the standard CentOS 5 distribution.

  I wrote a bash script that made a list of the windows, firefox lance made a list once again. It then searches the differences in the lists of before and after opening firefox. In the end, the script uses wmctrl to change the size of the window which were found also recently opened. There is a small chance that some other window might appear while the opening of firefox and it will be be reduced too. However, in our case, this probability is very low and it is not worth.

  Here is the script which takes 3 parameters: width, height, URL.

  #!/bin/bash
  
  diff(){
    awk 'BEGIN{RS=ORS=" "}
         {NR==FNR?a[$0]++:a[$0]--}
         END{for(k in a)if(a[k])print k}' <(echo -n "${!1}") <(echo -n "${!2}")
  }
  
  window_count=$(wmctrl -l | wc -l)
  
  windows=()
  
  wmctrl -l > output
  
  exec 0<output 
  
  while read id type machine name
  
  do
  
    windows=("${windows[@]}" "$id")
  
  done
  
  # width and height in this call are ignored if some other firefox window is already open
  
  /usr/bin/firefox -P profile -width $1 -height $2 -new-window $3 &
  
  new_window_count=$window_count
  
  while [ "$window_count" -eq "$new_window_count" ]
  
  do
  
    #echo waiting...
  
    sleep 1
  
    new_window_count=$(wmctrl -l | wc -l)
  
  done
  
  new_windows=()
  
  wmctrl -l > output
  
  exec 0<output "$id")="" "${differences[@]}"="" $i="" -e="" -i="" -r="" 0,-1,-1,$1,$2="" <="" differences="($(diff" do="" done="" for="" i="" id="" in="" machine="" name="" new_windows="("${new_windows[@]}"" new_windows[@]))="" pre="" read="" type="" while="" windows[@]="" wmctrl="">
  
  done
  
  I had to do some tweaking in the script to fool the HTML editor. Some formatting of text is performed, that is not source friendly. That is why the script might look formatted strangely.
  
  </output>

• How to reset Firefox from the command line (without a mouse) on Linux?

  I use Firefox for automated desktop screenshots xvfb virtual. There is no mouse. So I need to reset Firefox from the command line. Uninstall a re - install led again to the window "reset".
  I use Ubuntu Server Edition 13.04.

  Otherwise, without a keyboard and a mouse, you can just reinstall and delete. / mozilla folder.

• Change access to command line network services

  Hello world

  With the help of Server 5 on El Capitan.  I adjust some parameters in the pane of the server. I was limiting the Administration remotely (and screen sharing?) to a specific machine - but made a typo.  The end result has been restricted access to 127.0.0.1 and the incorrect address.  So I can not long remote control administer the machine with the app Server, not with the ARD, and nor can I vnc inside.

  I, however, have ssh access.

  Is it possible to set the IP address associated with the service of the command-line remote administration?

  Thank you

  -Jeff.

  Disable packet filtering:

  sudo pfctl(8) d

  You should be able to connect to remote access. Then restart.

• Terminal watch ' print: / $ username'-how to reset to remove 'print' command line?

  Hello

  When I open my Terminal on my iMac, I ' print: /' before my user name$. It's not happened before with me and can't get on my Macbook Pro. I tried to remove plist, cd back home, but still adds the ' print /: How can I get that back to my default command line? * See example below

  Thank you!

  

  sudo scutil --set HostName whatever-you-want

  If it does not, the host name is used for the result of a reverse lookup of your IP address on a local DNS server, very likely your gateway.