Command of the keyboard to switch between work plans?

Similar Questions

• Art of the conclusion of a particular work plan

  Hello

  I am struggling with the "sAIArtSet-> MatchingArtSet()" by limiting to find the artset since selected only work plan.

  One way is to browse the art found set and compare indexes artboard of art with the index of the selected artboard.

  Wanted to know if there a few suite SDK internal makes this iteration in a more optimized way?

  Thank you

  I don't think that there is something to help with this, at least not that I've found.

  I've never heard of a way to get the index of artboard of an art, I'm curious, where is the method? That would be enough practice for what you do. I would have had to use the limits of art and the scope of the artboard to determine what artboard art belongs to (if any).

• The commands on the keyboard do not work

  I'm really lost on this one. The keyboard controls function not unless the menu bar is selected.

  For example: by pressing cmd + t has no effect on its own, but if I press the menu bar with my mouse first (any column, as long as it is selected), then the keypad of works.

  To clarify: it is not that I have to press the specific menu for the command bar icon works. It's that I need to have the menu bar selected first so that the controls work.

  It's only a problem with Safari.

  Please disable all extensions Safari and test. If the problem is resolved, re - activate the extensions one or a few at a time until you find the culprit.

• my audio keys on the keyboard are no longer works

  I have a laptop dv7020 that I bought recently and I've updated my software (Windows 7) and now my audio keys on my keyboard don't seem to work. Could someone tell me what I should do to fix this problem, it's driving me crazy!

  Only the multimedia keys don't work in the volume control, mute, etc.? Or your Audio does not at all?

  Enter the BIOS by typing/holding the F10 key immediately after switching on the laptop. Reset to the default settings by pressing the F9 key, (maybe F5-check wallpaper for the correct key) Save & Exit.

• Trails of the icon when switching between desktops in the Sierra

  I noticed some display problems since the update for Sierra. I see some trails icon when switching between desktop computers as well as a line of 1px of random colors on the right side of the screen seems to be leftover pixels for the desktop switch as well.

  Here is a screenshot: https://cl.ly/hegc

  Here is a video showing the paths of the icon: https://cl.ly/hef9

  Any other light this or know how to fix? It's rather annoying.

  Thanks in advance,

  Brent

  Hello Brent Spore.

  Thank you for reaching out to the Community Support from Apple. I know how it is important to keep your Mac running properly, and I want to help him.  Whenever we see the behavior as what you described, it is a good idea to test the symptoms in a separate user in safe mode. This will help us determine if the remanence of the icon is linked to a problem with the user account or if it's a question broad system. The articles below will guide you through these steps.

  How to test a question in another account on your Mac.

  Try safe mode if your Mac does not end commissioning

  If the ghost still occurs in safe mode, then we know it is a question broad system and I would recommend backup your Mac and Mac OS re-install using recovery, as described in the articles below:
  

  Use Time Machine to back up or restore your Mac

  How do I reinstall macOS

  If the behaviour continues or if you encounter difficulties, the entire community is here to help.

  Best regards.

• Why my tab on the keyboard key does not work since the upgrade to 16.0 FF?

  Noticed this trying to get around on your website, GMail etc so that I can move from one field to (example: in the field in Gmail, hit the tab key on the keyboard to move to the field of the object).
  Inadmissible tab button.
  Safari and Chrome have this ability. Obviously something has occurred that I updated today to 16.0 and yet I was indeed in the 15.x.

  This key is important for speed for a daily work. Please tell us how can I re - activate its features.

  Thank you.

  COR - el,

  Just updated tonight at 16.0.1 and voila, the problem has been resolved without being too technical.

  Wanted to thank you for your help.

• Rearrange the spaces when switching between applications

  When switching between apps spaces can reorganize, which is disturbing for users with specific workflows. For example, right now I have 6 places with different applications in each, and I have these in a specific order. However, since upgrading to El Capitan, I find continues to reorganize themselves. I can reproduce this by opting for an application by opening a window in a non adjacent space. For example, I have a window open in 4-space and I am consulting a window in space 1. If I pass this request, space 4 will be moved to position 2. It always seems to move space to the next position to the right of the current space. I can reproduce this reliable either by opting for an application by using cmd - tab, or if I have multiple windows for a single application running in more than one space, using app expose.

  Djroshi,

  My office reorganise themselves once the screen saver is running can provide you with some tips to change this behavior.

  

• Satellite L655-11 t - backlight the keyboard power switch?

  Hello

  Just bought the L655 - 11 t for parents and they say when they went it they would insist "fn" key and the rear lights of the keyboard would light up, but now that I'm here, it no longer seems back light?

  The Satellite has a feature of keyboard illumination on/off button?

  thanx

  Who told you that?
  I m not 100% sure, but I think your L655 doesn't have keyboard with backlight.

  By the way: all laptops with this feature have additional options in Toshiba HWsetup.
  How do I check this?
  Open Toshiba Assist > optimize > HWSetup. There must be some keyboard Options tab where you can set how it works.

• The water in some of the keyboard keys - does not work

  I recently spilled water on the keyboard and now only some keys do not work. Is it possible to dry out or if not is it possible to have a new mounted keyboard?

  Any help is greatly appreciated.

  Hello

  I don't know if it is possible to dry it and if it will help you to solve this problem, but you can replace the keyboard Mr. in this case, you should ask the ASP for the detailed information.
  ASP can also order the compatible keyboard for you.

  Good bye

• The WGA600N can switch between 2 channels?

  I hope that I am not on something, but I can't find an answer to my question.

  I have the WRT610N simultaneous dual band router paired with a WGA600N wireless dual-band adapter.

  With the router, I set myself to 2.4 and 5 GHz channels separate SSID and WPA2 encryption keys.  My adapter, although it can 'see' the two networks, connect only to one. On the product for the WGA600N support page, it says clearly, "dynamically travel channels and wireless networks based on the quality of the actual signal and a link for maximum availability and reliability of connection."

  My question is... How can I activate my game card work on the 2.4 and 5 GHz channels to find the best connection?  It seems in the WGA600N Setup, it makes me choose a channel.  Both channels on my router must be on the same SSID and the same encryption key for the adapter to switch back?  Should I switch to WEP mode?

  On your Linksys card, only a single frequency could serve both (2.4 GHz or 5 GHz), although it could pass the frequency... Access your game card and go to the Wireless tab on the Basic tab, select 802.11 2.4 GHz and 5 GHz band... 802.11 mode should be mixed 802.11na, 802. 11A, 802.11ng, 802.11 g, 802. 11 b, let the rate of automatic transmission and channel width should be 20/40 MHz...

  Be sure to set the security WPA (not WEP/WPA2) wireless...

• Sleep on the keyboard button no longer works after a remote session with a technician

  original title: sleep function

  button on the keyboard function sleep and sleep in Start menu stopped working after that technical support trying to solve a problem without report with via remote access. How to make the sleep button/function to work?

  Hello

  1. what measures have been taken to solve the problem? What was the problem or question?
  2. what exactly happens when you select sleep start menu option?

  Windows 7 is not going to sleep
  http://support.Microsoft.com/kb/976877 (see bottom of article, which can be useful for vista too)

  Also please see articles below.

  Turn off a computer: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-off-a-computer-frequently-asked-questions
  Why sleep is not available?
  http://Windows.Microsoft.com/en-us/Windows-Vista/why-isn ' t-sleep-available

• control of the volume on the keyboard keys do not work with usb dac

  o/s ultimate win7, ms wired keyboard 600, usb dac.

  I finally got the volume bar work, he reacts to the keys flight + /, but the volume remains the same.

  the only way I can change the volume is with my mouse in the window of Mixer volume, which is very inconvenient.

  no idea why the flying keys do not affect usb taken?

  Thank you

  Hi Yogi46,

  ·        Have you installed the software supplied with the Microsoft keyboard keyboard?

  ·        Who is the manufacturer of the computer, and what is the model of the computer number?

  I suggest to access the link below and download the keyboard theIntelliType Pro 8.0 for Windows 7 software and install it and check it out it allows you to change the volume using the keyboard.

  http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=MK&type=keyboard&name=anb-00001&OS=Win7_32&lang=en

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Updated to the new Photoshop CC 2015: work plan and the background are both white I can't see any outline. Will not change when I try to get a different background color.

  This seems almost elementary but I tried everything literally, the only thing I can think is that this is a bug.

  When I'm working on work plans, they are white and the background is white, so I don't quite see the outline. I tried to change the background color to dark gray or any other color, but nothing works. I restarted my computer, the software, everything. Nothing works. It only happens to me, everyone in my company isn't the problem. We checked out the contrast on my computer and it's all good. I had two different designers tinker around with it and they say it must be a bug because they have tried everything they can and I also.

  Now I simply add a grey box dark to my work plans so I can see the sketch, but it's really annoying, I have to do, especially since I work with Photoshop 4 hours per day.

  You must set your GPU options in preferences to something other than "Bacic."

• How can I change the settings for spacing of work plan?

  On Illustrator CC

  Set up a new document, place 4 work plans with a 10mm spacing between each Board... click OK.

  Now how do I change this spacing now? I can't find reference to it anywhere.

  Any ideas?

  Object > work plans > reorganize work plans.

• command of the keyboard to move does not work

  The command of period and comma for FCPX on my iMac won't work. FCPX just beeps at me instead to shift the video before a picture or backward a frame. (for a comma) He works for the arrow, but for some reason some will not work with the key to the period and comma. I use an Apple keyboard without the numeric keypad.

  OCHA you post a screenshot. You cannot move a clip in the scenario unless the Position tool is active.