Command requires controller GPIB be supported on dequeue item

Similar Questions

• The code runs fine for 1 time. NOR-DAQ: command requires controller gpib controller

  Hi all

  My labview code is attached. He controls a powersupply lakeshore, keithley and sourcemeter multi-meter and a GM08 Gaussmeter.
  The code works perfectly on the 1st round.
  However, on the 2nd round, the initialization for the sourcemeter (KE2400) returns an error.
  The code works well again after cessation of the VI and it works again.

  I have no idea why this is happening, any advice would be helpful thank you! (as with all tips to make my code better in general)

  My big loop is of my readings on average.

  If the error occurs at initialization, then the question is not the shift registers. All of your entries to the initialization did not all local variables or something weird, so it has nothing to do with the values changing with each race. That leaves the issue lying with the instrument itself, or communication with the instrument.

  When you first run the application is complete, there are errors? Run VI close very well to close the connection?

  I suggest you do a little test VI passing right through the screw, using the Sourcemeter to see if you can dial in on the problem. If you test VI initializes and works fine again and again, then it might be a problem with your errors or manipulation of communication management.

• Xcode requires additional components to support running and debugging

  Hi all

  Today, I tried to start xcode. And he asks me "xcode requires additional components to support running and debugging. Select installation to add rewuired components.

  Is this ok? Or is my system caught by some funny virus / malware? Is - this caused by the upgrade of 10.11.3 at 10.11.4, is a new version of xcode?

  I have never seen before such a message.

  Greetings from the Germany

  Chris

  Hi Chris,

  The Add ab El Capitan as Xcode keine additional components.

  Hello alles on board!

  VIELLEICHT hilft Dir das yesterday ein wenig!

  https://youtu.be/K-rbWeSL0rY

  Gruss Ralf

• I bought from amazon lightroom 6 and I have win7 pro 64-bit and during the installation message appears OS not not met requirment win VISTA NOT supported

  I bought from amazon lightroom 6 and I have win7 pro 64-bit and during the installation message appears OS not not met requirment win VISTA NOT supported

  See the link below:

  https://forums.Adobe.com/thread/1836232

  The folder Lightroom 6.

  Right-click on Setup.exe and choose Properties option.

  Then click on the Compatibility tab.

  The value of the Windows 7 operating system and check.

• ORA-15072: command requires at least 2 groups of regular, discovered only failure 1

  Hello

  I am creating a diskgroup for temporary use. I did not mention the type of redundancy. When I ran the command below, I had mentioned errors.

  "SQL > Create diskgroup temp_dg disk ' / dev/map/003w1_e2p5 ' attribute 'compatible.asm' = ' 11.2.0.0.0 ';

  ' Create the diskgroup temp_dg disc ' /003w1_e2p5' attribute 'compatible.asm' = ' 11.2.0.0.0. '

  *

  ERROR on line 1:

  ORA-15018: diskgroup cannot be created.

  ORA-15072: command requires at least 2 groups of regular, discovered only failure 1

  When I used two disks, diskgroup created.

  All starts in ASM is EXTERNAL redundancy.

  SQL > Select distinct type from v$ asm_diskgroup;

  TYPE

  ------

  EXTERN

  I would like to know why he asked create diskgroup redundancy NORMAL. Y at - it something like default REDUNDANCY in ASM.

  Please let know us your opinion.

  By,.

  Enter Oracle DBA

  Step_Into_Oracle_DBA wrote:

  Nope.

  I would like to know why he asked create diskgroup redundancy NORMAL when all starts is EXTERNAL redundancy. Y at - it something like default REDUNDANCY in ASM.

  If you want to create redundancy external ASM diskgroup, then you must explicitly give REDUNDANCY EXTERNAL create diskgroup command as below:

  CREATE the DISKGROUP data EXTERNAL DISK of REDUNDANCY "/ dev/d1 ', ' / dev/d2 ', ' / dev/d3 ',...;

  Y at - it something like default REDUNDANCY in ASM.

  Yes, if you do not write OUTSIDE, NORMAL or HIGH REDUNDANCY in order create diskgroup, and then create diskgroup command will create REDUNDANCY NORMAL. (with min require two ASM disk)

  Concerning

  Mr. Mahir Quluzade

• Dequeue item expires when queue item has new data

  Hello

  I use a producer/consumer, set up and I get only one - iteration of the loop of my consumption.  I probed the cluster wire that feeds on the element of queue of producer and there is there a continuous data stream.  I have a timeout that is connected to the dequeue item in the loop of consumption and have tried at various times to 1ms to 1000 ms.  He is currently at 25 ms.  There must be something else that is causing this problem, but I'm on it.

  I also tried adding a handler that would detect a change of value in the data.  Who did nothing.  I tried to restart my machine without success.  I'm about to close and take the battery of my laptop and restart (the Act of a man out of options).

  If someone could help, I would be indebted.

  GNU P

  Hi P Gnu

  Why would you put an event handler in the loop of the consumer? Furthermore there is no time-out for the event handler (default is - 1, which means that the execution of the loop will be suspended until an event occurs and therefore the consumer loop iteration is 0). You can just use a local variable to the stop command to detect changes in the timeout value.

• I bought Photoshop Elements less than a month ago (30 of August), and so I should the conditions required for a free update to 14 items. But I can't find out how to get. Bent

  I bought Photoshop Elements less than a month ago (30 of August), and so I should the conditions required for a free update to 14 items. But I can't find out how to get. Help, please. Bent

  Your purchase is saved in your Adobe account? If Yes, click on the link below.

  When you have all the required information, including the Adobe order number or proof of purchase, click on apply for upgrade, and then click contact us.

  l https://helpx.adobe.com/x-productkb/Policy-Pricing/Upgrade-Policy-Product-Announcement.htm

• NOR-488 command requires GPIB controller charge controller

  I need your help, if you please! I added a few cases to a case structure and my program works very well. When I want to rebuild or build an exe again, I got error message attached. The solutions mentioned in this area and other platforms did not help. I don't know what to change because the program works very well, but I can't build

  Thanks to the support OR! There was a folder that had references which are no longer available on the hard disk. I've updated this file and reconstruction didn't work

• Toshiba Media Controller does not support Flash Player 11?

  My Toshiba media controller plug not launch my apps on internet games and downloads.
  and I get a message saying that it is because he does not support the latest version of Adobe flash player 11.

  I got around him for awhile by backdating the system restore... but Adobe and windows have caught up.
  My computer is only 12 months old probably would follow?

  What can I please.

  Hello

  As far as I know, download you the latest Toshiba Media Controller here:
  http://APS2.toshiba-tro.de/TMC/?page=downloads

  The plug-in must be compatible with Internet Explorer.

  Also check this Toshiba forum thread on this error message:
  http://forums.Toshiba.com/T5/drivers-and-utilities/plug-in-problem/m-p/240712

• Setting up command line options Toshiba VAP - Support Button-

  Hello

  I need to configure the button Support drivers for laptops of the Portege series as part of the deployment of Windows 7 x 64 bit Enterprise on the following models: Z830, Z930 and R930.

  I need to install Toshiba value added package with Flash card option only.
  What command line options are present to do that?
  I'm looking for it deploy through SCCM.

  Thank you

  Hello

  My knowledge of the value of added Toshiba contains various simple applications of Toshiba. These applications must be installed one after the other.
  You will need to run the setup.exe / installation.exe for the procedure to start the other options are not known to me

• I just bought 6 Lightroom on DVD and it will not be installed. message says OS disappointed requirment, Windows Vista not supported. I have Windows 7, NOT in Vista. What is the problem?

  Just bought 6 of Lightroom and it don't be loading not - says OS requirement not met (whatever!) and Windows Vista supported nopt. I HAVE WINDOWS 7, VISTA NO. Add to my frustration, I can't just talk on the phone to ask a question, I have to go through any of this bubble.

  Try installing lightroom 6 on windows 7 get interface requirement not met windows vista not supported

• command line combines the files supported in acrobat

  I need to write small software tool for my Department. I want to know if we have any sentence command line to combine the jpg images.

  normally from the windows Explorer window

  I can select all the jpg files and when I click on the right button on the window they show combines the files supported in acrobat and then I check if single file is selected and I clicked on the combine files button.

  then I put the name of the file and press save button.

  But I want to treat this step via command line commands.

  Can you show no answer for me.

  Acrobat has all access command-line creation or editing tools. It is intentional that Acrobat is not licensed for use as a process server and command line options allow this type of deployment if they were included.

• How to find the list of the cameras raw files supported for 12 items

  Where you will find the list of cameras supported by photoshop elements 12 raw processing?

  Here:

  Camera Raw plugin | Supported devices

  What operating system do you use?

  PSE 12 can use up to camera raw 8.5, so if you do not have 8.5, use help > updates editor of PES 12 to get the update to camera raw 8.5.

• RAW support for 10 items

  I have been using different versions of the items for the years to process the RAW images.  I recently (2 months ago) bought the Sony RX100 and updated for the latest items - 10.  RAW support was not available for the RX100, but he promised for the next update to Camera Raw.  Indeed camera Raw 7 includes coverage for the camera, but is only available for Photoshop CS6.  What's the story?

  The story is 11 elements. Buy the upgrade.

  Mylenium

• How to open taken with Canon 70 d raw files.  Not supported in 12 items.  Is there a download?  Thank you.

  How to open files taken with a Canon 70 d raw?  12 items.  Version 8.0, Windows 7 64 bit.  Thanks in advance for any help.

  JWT

  Lamar, Colorado

  THANKS FOR YOUR HELP.

  JWT