Xcode requires additional components to support running and debugging

Similar Questions

• How can I get my flash drive to work? When I install, Windows does not recognize it. In addition, I can't run windows updates and my Install.exe is not responding

  Since I installed Norton I had problems with my computer. I uninstalled it to see if anything works. No luck.

  Since I installed Norton I had problems with my computer. I uninstalled it to see if anything works. No luck.

  Try this. First of all, download and run the utility to remove Norton from the link below.

  Norton removal tool. (click on your version of norton to download the tool).

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?docid=20080710133834EN&product=home&PVID=f-home&version=1&LG=en&CT=us

  Then reinsert your USB key after a few reboots to see if it is recognized. If this is not the case, refer to the procedure described in the link below.

  USB drive not recognized xp.

  http://support.Microsoft.com/kb/925196

  Also, click on Start, run, type ""services.msc ' in the Run dialog box. " Click on 'ok '. Scroll down to "Background Intelligent service". "" Right-click on the service and select Properties. The service is in the started state? If this is not the case, click the button to start the service and the value manual starttype.

  Regarding Windows Update problem, first check your level of service pack for xp by clicking Start, run and type of dialog box running 'winver '. If your service pack is sp3, skip this step and try to reset the windows update components. Refer to the link below to get the procedure.

  http://support.Microsoft.com/kb/971058

  If you don't have XP SP3 installed, you can download and install from the link provided below.

  Windows XP SP3

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  If have any questions, post here on this thread. Good luck.

• After upgrading Office 2003 to Office 2010, when rebooting, open a window of choce of windows update, if you select do not do updates, wauclt.exe runs and the pigs, cold start pc is required

  After upgrading Office 2003 to Office 2010, when rebooting, open a window of choce of windows update, if you select do not do updates, wauclt.exe runs and the pigs, cold start pc is required to restart or allow time (about an hour) for wuauclt stop execution and free PC - our aim here is to bundle 2010 via ZEN na enter the beam perfectly - this popup must be eliminated

  Hi Pops1148,

  ·         Is the question not confined with updated Microsoft Office?

  Follow the suggestions below for a possible solution:

  Method 1: You can follow the steps in the article in the Microsoft Knowledge Base and check if it works.

   

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  Method 2: Try the SFC (System File Checker) scan on the computer.

  To run the System File Checker tool, follow these steps:

  a. click Startand type cmd in the box start the search .

  b. right click on cmd in the list programs, and then click run as administrator.

  c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  d. at the command prompt, the following line and press ENTER:

  sfc/scannow

  Reference:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Method 3: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

   

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While hard disk analysis if bad sectors are found when scanning try to repair this area, all available on which data can be lost.

  Let us know if that helps.

• -I can, t install my Flash App error showed: administrator required parameters. I m running on MacOs, and I use my administrator account

  I can, t install my Flash App error showed: administrator required parameters. I m running on MacOs, and I use my administrator account

  Follow the instructions below:

  Exit the desktop application Cloud Creative and close Adobe applications.

  Follow the procedure below:

  Step 1:

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command, and then press the 'Return'. () Do not miss ~ symbol)

  ~/Library

  (3) then navigate to Application Support > Adobe

  .

  Right-click on the Adobe folder and select ""GetInfo ' option. "

  Expand the sharing & permissions section.

  Click on the padlock icon in the lower corner on the right. Enter your administrator user name and password when you are prompted, and then click OK.

  Please click on '+' symbol, it will open the list of user accounts. Add currently logged in username and administrator option,

  Then indicate ""& read/write " permission currently logged in username and Administrator option."

  Click the gear icon and select apply to closed. Close the dialog box information .

  Step 2:

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command, and then press the 'Enter'.

  / Library

  (3) then navigate to Application Support > Adobe

  .

  Right-click on the Adobe folder and select ""GetInfo ' option. "

  Expand the sharing & permissions section.

  Click on the padlock icon in the lower corner on the right. Enter your administrator user name and password when you are prompted, and then click OK.

  Please click on '+' symbol, it will open the list of user accounts. Add currently logged in username and administrator option,

  Then indicate ""& read/write " permission currently logged in username and Administrator option."

  Click the gear icon and select apply to closed. Close the dialog box information .

  ------------------------------------------------------------------------------------------ ----------------------------------------------------------------------------------------- - -----------

  Then launch creative Cloud desktop application and try reinstalling the Flash application.

• Reference Dell studio 1536 gacé graphic / help__i have a computer laptop dell studio and I want to add additional video from my laptop hybrid crossfire support card and I can't find a solution and a graphics card for my notbook

  Ideas:

  • I have a dell studio laptop and I want to add additional video from my laptop hybrid crossfire support card and I can't find a solution and a graphics card for my notbook

  There SR 780 chip and also I could not find any housing emty external or internal to a 3D support
  Help, please

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi waheedkhan

  Welcome to the Microsoft Answers Forum!

  To install additional video card for laptop is not possible as desktop, as the video card is integrated with the motherboard. However you can contact Dell technical support if they can provide an additional location for add video card. Here is the link to the support technology guide below: http://support.dell.com

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Windows XP home has lost, it is the function of help when I go to help & Support it says a system service is not running and then said go to the Support & Help! ?? Catch 22. Thank you, Dennis Australia

  When I go to help & support it says a system service is not running and then said go to support &! ??
  Catch 22.
  Thank you, Dennis
  Australia

  Go to: Control Panel, administrative tools, Services, double click on help and Support.

  Startup type: automatic

  Service status: click on start, click on apply, click OK

• I bought from amazon lightroom 6 and I have win7 pro 64-bit and during the installation message appears OS not not met requirment win VISTA NOT supported

  I bought from amazon lightroom 6 and I have win7 pro 64-bit and during the installation message appears OS not not met requirment win VISTA NOT supported

  See the link below:

  https://forums.Adobe.com/thread/1836232

  The folder Lightroom 6.

  Right-click on Setup.exe and choose Properties option.

  Then click on the Compatibility tab.

  The value of the Windows 7 operating system and check.

• new hd on a macbook pro, whenever I do the lion install from system errors to can't download additional components, I'm tired of all that I have to buy a new copy

  I have a MacBook Pro, they put in a new HD when I do a restore with the system software on the disk, which is the Lion. Whenever he mistakes to can't download additional components. I do not have the orginial program because they lose. What I need to buy the software or how do I get an OS on this MacBook so it will work? I need help I can get right now.

  Thank you

  Mary P.

  -Try resetting the SMC:

  Reset the management system (SCM) controller on your Mac - Apple Support

  -Did you format/erase the new drive using disk utility that is included in the recovery of the Internet?

  -Try to turn off and on your router and the modem?

  -What are the symptoms led you to replace the HD?

  Maybe you had problems next to the HD.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• RUNNING AND RUNNING AND RUNNING UPDATE

  My desktop pc and my laptop both running on Vista. A few months ago, I had a problem with my laptop - when you the turned on, he told me it was updated 3 3-0% complete configuration and it turns off after a few minutes and restart and start all over again. I had to do a system restore and restore the system to an earlier date and then it worked fine. NOW, I have the same problem with my PC. Unfortunately, when I run the system restore, it just runs and runs and - hours. Does not. Tech support tells me that I have to put my system returns with a system recovery - total headache I have to reinstall all my software again. How can I prevent future problems? How will I know when an update is really needed for my sysytem? Of course, the latter was just incoherent.

  Windows Update installs only the Updater you machine that supposedly require.

  Before making a full recovery, try this:

  Download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  It will be useful.

  See you soon.

  Mick Murphy - Microsoft partner

• WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D,.

  IM TRYING to re - INSTALL WINDOWS VISTA ON MY T-6321 to the front door, BUT WHEN I INSERT THE DISC, AND INSTALL, a MESSAGE APPEARS SAYING: WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D, SHOULD ALL BE ON THE DISCALREADY?

  Hi JRCLNSIN100,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         What is the disk you use to reinstall?

  ·         Is this a recovery or reinstalling the disc you are using?

  ·         When exactly do you get this error message?

  ·         What is the edition of Windows Vista, you try to install?

  ·         How old is the drive that you are using?

  ·         How are you starting the installation process?

  After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

  First check if you have scratches or dust on the disc and clean the surface and try again.

  To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

  To perform a flat installation of Windows Vista, follow these steps.

  Note The hard disk must have at least 3 GB of free space on the disk for the Windows Vista installation files. The hard disk must have at least 15 GB of additional disk space to install Windows Vista. For more information about system requirements for Windows Vista, see the Microsoft Web site at the following address:

  http://www.Microsoft.com/Windows/products/windowsvista/editions/SystemRequirements.mspx

  1. Insert the Windows Vista installation disc.
  2. Start Windows Explorer.
  3. In Windows Explorer, click to select the drive for the Windows Vista installation disc.
  4. On the Edit menu, click select all.
  5. On the Edit menu, click copy.
  6. Click to select the hard disk you want to contain the flat installation files.
  7. On the file menu, point to new, click the folder, type Windows Vista Setupand then press ENTER.
  8. Double-click the Windows Vista Setup program, and then click Paste on the Edit menu.
  9. Double-click Setup.exe, and then follow the instructions that appear.

  See the link below for more information on flat installation.

  How to perform a flat installation of Windows Vista

  http://support.Microsoft.com/kb/928902

  This problem can also occur if the firmware of the DVD drive is defective or obsolete.

  If the step above does not resolve the question suggests that you install the latest drivers for the DVD player on the computer.

  For more information please visit the link below.

  Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

  http://support.Microsoft.com/kb/930984

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Stop questions, error task host is running and giving orders to the programs.

  Original title: interference of the task host?

  When I close my computer that he told me that the task host is running and controls giving programs or something like that. It's really interfere with the performance of my laptop. Can you help me?

  Hello

   
  1. have you made changes on the computer before this problem?
  2. What is the exact error message that you receive?
   
   
  Refer to this article
  There is a delay when you stop, restart or log off a computer that is running Windows 7 or Windows Server 2008 R2
  http://support.Microsoft.com/kb/975777/en-us
   
   
   
  The TASKHOST is a generic process, which acts as a host for the processes that are running DLL instead of exe files.
   
  To the performance problem, use performance monitor to view performance data in real-time or a log file.
   
  New resource monitor allows you to view detailed information in real time on material resources (CPU, disk, network and memory) and resources of the system (including the handles and modules) in use by the operating system, running applications and services. In addition, you can use resource monitor to stop the process, start and stop services, analyze blockages in the process, discovered the waiting thread chains and identify the process of file block.
   
   
  See use of CPU utilization and other performance information
  http://Windows.Microsoft.com/en-us/Windows7/view-CPU-utilization-and-other-performance-information
   
   
  See details about your computer's performance using Task Manager
  http://Windows.Microsoft.com/en-us/Windows7/see-details-about-your-computers-performance-using-Task-Manager

• I have a server/database Application Express 4.1.1 running and a server/database Application Express 4.2.0 running. Is it risky to try to upgrade to the latest version and start using the universal or complex theme?

  I have a server/database running Application Express 4.1.1 and a server/database active Application Express 4.2.0. Is it risky to try to upgrade them both to the latest version and start using the universal or complex theme?  Is how easy it to do? Recommended?

  The servers are windows 2008 r2. Don't know if it matters.

  I'm not exactly an expert at the express request...

  Hi DJake,

  DJake wrote:

  I have a server/database Application Express 4.1.1 running and a server/database Application Express 4.2.0 running. Is it risky to try to upgrade them both to the latest version and start using the universal or complex theme?  Is how easy it to do? Recommended?

  The servers are windows 2008 r2. Don't know if it matters.

  I'm not exactly an expert at the express request...

  Please read the documentation of the requirement for Oracle APEX 5. Ensure that your environment meets these requirements. Upgrade your oracle database or other software if necessary components and then you can go right 4.1/4.2 to 5.0 update according to the above-discussed upgrade strategies in the above discussions.

  Reference: https://docs.oracle.com/cd/E59726_01/install.50/e39144/pre_require.htm#HTMIG376

  You should go for upgrade of the Oracle APEX of 4.1 to 5.x. Regression test your applications to remove if any errors introduced by upgrade. The kickoff of a new project to migrate your applications to universal theme.

  Reference:

  • Re: upgrading to 5.0 - best practices
  • Re: APEX late upgrade
  • https://www.YouTube.com/watch?v=o8S4bg4Vo0A

  Kind regards

  Kiran

• Error: "it is not possible to disable the connection at this time. "This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

  Original title: unable to disable my lan connection

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • I turn off my connection to the local network, it is showing message.

    It is not possible to disable the connection at this time. This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

    Please answer soon

    You have problems with programs

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi MVTDA,

  You can try the following methods and check to see if it helps:

  Method 1:

  a. Click Start and select run, type cmd and click OK.

  b. type net stop cryptsvc and press ENTER.

  c. type ren %systemroot%\System32\Catroot2 oldcatroot2, and then press the Enter key.

  d. restart the computer.

  e. open new command prompt and Type net start cryptsvc, and press ENTER.

  Method 2:

  If the same problem persists then you can try to uninstall the network drivers and check.

  a. click the Start button. Select run, type devmgmt.msc and press OK.

  b. Select the network card and right click on it.

  c. now, select Properties.

  d. in the Properties window, on the driver tab, click Uninstall.

  e. After you have uninstalled the drivers, restart the computer.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• What exactly will happen to the wizard of Frontpage 2000 database during the XP support runs out?

  I have been using the wizard of Frontpage 2000 database to develop a main set of forms that link in my database access 2000 on the side (non-public) back to my site. I realize that the two programs are considered as obsolete, but unfortunately, I can't find a replacement web development software which is what makes the wizard, unless I want to get heavily into the code (kind of like go back).

  I have windows 7 pro and use virtual xp to run frontpage 2000 for my Web site and data-based forms.

  What happens exactly when the XP support runs out? Y at - it a purchase option to continue with the updates, where I am, as it estimated 15 to 30% of the existing Microsoft customers who are always based on the use of XP will be "punished" to explain their desire to stay with a product that has succeeded all too well? (at least for me as far as where this feature goes)

  Ron

  Original title: end of support for XP

  http://Windows.Microsoft.com/en-us/Windows/products/lifecycle

  Care about the lifecycle of Windows

  See also: http://windows.microsoft.com/eos

  What does support mean to you?

  After April 8, 2014, technical support for Windows XP will not be available, including the automatic updates that help protect your PC. If you continue to use Windows XP, your computer may become more vulnerable to viruses and security risks. For more information, see does that mean if my version of Windows is no longer supported?

• Svchost.exe is free running and leaves multiple windows open all gel. Re-loaded windows XP after a crash with original rescue records.

  Original title: Windows XP - free race - is lost.

  Just re - load windows XP after a crash with original rescue discs, svchost.exe is free running and leaves several Windows Open gel, all on and offline. Any ideas? I ran ms-fixit beta for all listed. I also disabled Norton and now use Windows Defender, still no luck.

  Hi MarkBerri,

  ·         How long have you been faced with this problem?

  ·         Did you do changes on the computer before the show?

  Svchost.exe is a process name generic host for services that run from dynamic link (dll) libraries. The Svchost.exe file is located in the folder C:\Windows\System32. At startup, Svchost.exe checks the registry services part in order to build a list of services that it needs to load. Multiple instances of Svchost.exe can run at the same time. Each Svchost.exe session can contain a grouping of services. Therefore, separate services can run, depending on how and where Svchost.exe is started. This grouping of services enabling better control and easier debugging.

  Svchost.exe groups are identified in the following registry key:

  HKEY_LOCAL_MACHINE\Software\Microsoft\WindowsNT\CurrentVersion\Svchost

  You can run the auditor of system files on the computer.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Note: if it asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker:

  http://support.Microsoft.com/kb/900910 (valid for Service pack 3)

  Hope this information helps.