command to erase the hit ACL County and stats interface
Hello
Does anyone know a command to erase the HIT count on an ACL and a command to clear the counters on an interface for the PIX? I can't find it anywhere. Any help would be appreciated. Thank you.
The f
Hello
Try the command:
> access-list clear counters
This clears the counters displayed by the show access-list command.
To delete counters on an interface, enter configuration mode and issue this command: clear int ethernet0
(You must be in config for this command mode works.)
Speed/duplex, once spending config mode and type this command: interface ethernet0 100full
In addition, the following URL might be of interest...
Hope this helps - thanks, Jay
Tags: Cisco Security
Similar Questions
-
Confusion in the order of line and statement-level trigger
Hi can anyone tell me, if I create a trigger on the emp table as in order...
BEFORE INSERTING... LINE LEVEL
BEFORE INSERTING... LEVEL STMNT
AFTER INSERTING... LINE LEVEL
AFTER INSERTING... LEVEL STMNT
that will be the order of execution of the trigers?
How oracle will decide order?
Please give me some documents related to the order of execution of triggers... thnx in advance... !PC says:
Hello.. Obtained response on the order of... but 1 weird point I m feeling thatin the case of, before insertion... stmnt fire triger level 1 then insert before... line.
but in the case of after insert... fireing level trigger line then 1 after insertion... stmnt level...
can you explain this also...
Why is it so strange.
You have a statement that you are running.
The first possible thing is that you are 'before' the statement.
The next thing that is possible is that the statement is executed for each line.
So for each line, there is a 'before' to each line and a point "after" each line.
Once the statement is executed, you are 'after' the statement.
Thus, it makes sense the statement triggers surrounds education and line triggers are education, and of course 'before' comes before 'after '.
-
Erase the disc, re - install OS
I have an iMac with three partitions on the system disk. I want to erase the disc (including partitions) and re - install OSX. What is the best way to do it?
Boot from the recovery partition - hold command-r immediately after pressing the power button.
Here, you can wipe the drive and install the operating system for the network.
Edit: This can install the version of the operating system provided with your mac; Then use the normal procedure to update.
-
Reset home folder permissions and the default ACL on macOS Sierra?
A tool that I've used in the past to troubleshooting doesn't seem to be available in macOS Sierra.
There was a procedure in el captain to reset the permissions of file and ACLs in start in recovery mode, by running the command terminal, resetpassword. This command pulls up a GUI in Sierra as el cap but the "reset the user permissions and ACLs" option is no longer there.
This article describes the procedure to el captain
http://appletoolbox.com/2016/07/fix-corrupt-user-accounts-MacOS/#For_El_Capitan _ andmacOS
Is there another way to reset the permissions of the user and the default ACLs on macOS Sierra?
If you are looking for in the forums on the topic and limit to messages by Linc Davis, he posted a script that will reset everything.
-
Website of the tab takes over the entire screen, even the line apps Windows downstairs. Hit the ESC does nothing. If I close FF and re - start, it goes back to the same state that it was when I killed him. Order No. FF buttons there so there is no way to reset it. The tab web site occupies the entire screen. Help! I use MS Internet Explorer to send this info that FF is currently useless.
Sounds that you have enabled Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Command + SHIFT + F).
If you are in full screen view then hover over with the mouse to the top of the screen to facilitate the bar appear Navigation and tab bar.
Click the expand (in the top right Navigation bar) to exit full screen or right-click on a space empty on a toolbar and select "exit full screen" or press the F11 key. -
Command line after erasing the hard drive
I work for a charity and have inherited a HP Compaq 6735 s in which the HD has been erased. I have no recovery disks. Simple question - how do the command line? The start menu is exactly that, a menu. Can I go out to a command line?
To run a command, you must first run a code it-such as files on the hard drive or a bootable floppy. There is no file on a hard drive wiped. Start with a Windows or other bootable media diskette.
You should be able to get the installation of HP media. Give them a call.800 - 334-5144 if you are in the United States or to the CA.
If you live in another part of the world, start here >Contact HP
-
Hello
My iPhone was stolen and "Find my iPhone" has been disabled, also phone was not synchronized with iCloud.
Is it still possible to erase the data on the iPhone.
Using the IMEI number, can I block my iPhone.
Indications will be useful.
Sorry no.
You can report it to the police and tell your provider of mobile telephony on the flight.
In addition, change your passwords.
-
By clicking on the address bar or search bar and typing does not erase the previous text inside
When I click on the address bar or search bar and start typing a new entry, it does not erase the previous text. I always have to remove it first to clear the field and then I can type in the new URL or keyword...
OK, I found the search the on: configuration database. The problem is that browser.urlbar.clickSelects.All is set to "false". I changed it to "true" and now everything is perfect...
Also to solve the same problem with the search bar, I changed browser.search.context.loadInBackground from false to true.
-
When I select a word or phrase and copy to the Clipboard, then paste it into another area of the Clipboard does not erase the expression. Therefore, every time that I type and press the Enter key it continues paste the sentence throughout my document. I have the latest download of Firefox are installed (16.0, win 7 and that's when it started.) How to stop this heinous behavior so I can type a sentence with normality?
Louise
Try Firefox Safe mode to see how it works there.
A way of solving problems, which disables most of the modules.
The problems of Firefox using Firefox SafeModeWhen in Safe Mode...
- The State of plugins is not affected.
- Custom preferences are not affected.
- All extensions are disabled.
- The default theme is used, without a character.
- userChrome.css and userContent.css are ignored.
- The layout of the default toolbar is used.
- The JIT Javascript compiler is disabled.
- Hardware acceleration is disabled.
- You can open the mode without failure of Firefox 15.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
- Or use the Help menu option, click restart with the disabled... modules while Firefox is running.
To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.
If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themesWhen find you what is causing that, please let us know. It might help others who have this problem.
-
My 5s, IMessage iPhone does not work and when I try to activate it by electronic mail, the box opens, but I hit the sign in button and his stays there as it's frozen! Help
A deal with this * day. Only thing that worked was plugging it into the computer, it supported up to the computer. Do you have a reset, and when that went to spend he asked me to do an update "carrier". If you're on verizon? My co worker and I have the two are facing it today
-
How to make a new paragraph in a message? Whenever I hit the button "enter/return" the message is sent and all I want to do is make a new paragraph! Which button I hit to make a new paragraph?
Option-return.
-
How can I download photos and videos from my camera digital/dvr (panasonic sdr s50) to my computer that has windows MediaPlayer, WITHOUT erasing the cameras SD memory card? (I am running windows xp professional).
PS - I'm a senior and not warned, any computer do pls 'non technical' answers as possible.
Thanks in advance for the answers to my question!
Hello Fred!
- First create a new folder by right click on an open space on your desktop
- hover the mouse over the new, & click on new folder
- right-click on the new folder and choose Rename
- write your selected folder name
- Connect your data cable USB & POWER to the camera or insert the memory card
- Open the files and Select the files you want to save
- Select files butten now the mouse left click and move the mouse over the files
- then right click on the selected files and click copy
- go to the folder you named and open
- right-click and select Paste & that's it!
I hope this works!
Do not hesitate to ask, I don't mind! -
Click son on some site that I can download a Trojan horse. Disabled Malwarebytes and AVG update did not find. Saved that I need and now want to erase the hd and reinstall. Cannot get computer to read what whatsoever. I myself once in safe mode, but now it tells me that it cannot find a hard disk. I can refer to boot from the CD drive, but it gives me a blue screen error "cannot find a hard disk. Any help?
Your computer most likely has SATA drive and the Windows XP installation disc does not include the SATA controller drivers so Setup can not 'see' the hard drive. You have several options:
1. to detect the drive, you must use the F6 method to provide the drivers of controller for the installation program, note that when you use the F6 method, the pilots MUST be provided on a diskette, the installation program will not accept the drivers from other media sources.
Adding third-party or updated during the installation of Windows driver
Mass storage drivers and the Setup process2. you can integrate the drivers into your installation CD:
3. you can go into the BIOS and change the SATA controller in IDE mode and the Windows Installer will be able to detect the drive. Most of the BIOS have this option is available, if you don't you will need to use option 1 or 2 above.
John
-
INADVERTENTLY HIT TWO KEYS AND REVERSE SCREEN. ALSO THE MOVEMENTS OF THE MOUSE IS ALSO REVERSED. Can how I GET IT BACK to NORMAL
Thank you
I FORGOT TO MENTION THAT MY SYSTEM IS MICROSOFT VISTA
Several methods...
1 right-click on the free space of the desktop > graphics > Rotation 180 degrees >
2. press Ctrl + Alt at the same time and MAINTAIN > use the arrow keys to move around the screen.
3. do a system restore. Choose the date that you did not have this problem as your restore point. (But the first 2 methods should solve the problem.)
t-4-2
-
I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?
http://pcsupport.about.com/od/windowsvista/HT/nvistapassword.htm
Info on the link above will help you.
http://au.Dummies.com/how-to/content/set-up-passwords-in-Windows-Vista.html
More info on including a password reset disc info.
See you soon. Mick Murphy - Microsoft partner
Maybe you are looking for
-
iPhone 4S heating quickly, turn off the power and the battery drains quickly.
Hello My problem is exactly the same as the title. My iPhone 4S warms up quickly, turn it off and after I turn the iPhone, the battery drains quickly and the iPhone will turn off after 5 minutes. iPhone turns off again and again until I put the iPhon
-
Connection problem-NOR-488 GPIB: connection to the driver or device error
Hello I am trying to connect with my tunable laser "Santec" by GPIB-USB-HS. I received the file VI Labview (instrument driver) for my model of tunable laser STL-210 http://sine.ni.com/apps/utf8/niid_web_display.model_page?p_model_id=2791 . When I run
-
My DVD player will not read than anything and my cd on my sony vaio drive does not open. I tried to update the drivers, but still no luck.
-
New Pavilion g7 2302sa, problems with the help of touchpad
Hi, I hope I have my question in the right place now! I have just bought the above and watched videos of introduction, including regarding the use of the touch pad. I have a problem that when I put two fingers on the touchpad, the cursor remains stat
-
No audio signal from the forced update. Can not restart Windows Point of service endpoint
I now have 3 unnecessary Windows computers and 2 printers useless because the new drivers do not work. Computer 1 forced to W10 and I can take it is no longer online or the display driver is updated and I have a black screen. Computer 2: I tried to r