Comments operations manager / file manager returns an error "no route to host" when you try to copy comments RHEL to vCO device

Similar Questions

• -Error message 0 x 80070141 when you try to copy pictures from the phone to the computer

  Hello

  I am trying to download pictures from my phone on my computer and I get the message:

  Error message - 0 x 80070141 the device is inaccessible.

  Can anyone help please

  Carolyn

  I also had this problem under Windows 8 & using iphone 5s; However, I finally found a way around fun people, but it works. If you copy and paste each item one at a time, it works. If you try to do more than one item, you get the error message.

• When you try to copy a. DAT in Vista file, get error 0x80070057L, the parameter is incorrect

  I tried to copy a *. DAT file from a CD on my HARD drive. During the last 5 seconds, I always get the following error message:

  Error 0x80070057L the parameter is incorrect

  I am able to open the file, but can not copy. I tried on my laptop (Vista SP1) and on an another desktop running XP and get the same error.

  What causes this problem?

  Hello

  The problem occurs when you try to copy other files?

  Check if you can copy files in Mode without failure.

  Refer to this article for help:
  http://Windows.Microsoft.com/en-CA/Windows7/start-your-computer-in-safe-mode

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• File modified icons and error when you try to copy files: 0 x 80070052

  ll of a sudden, I found my Word document files, pdf and other files differnet looking and I got this message eorro 0 x 80070052 when I tried to copy

  I tried to solve this problem, but I forgot:

  I have norton antivirus on my pc and windows vista, I suddenly found that all my files (documents, photos odfs... etc) all have a strange icon placed in the original top icon it looks like Media Player. I can open them on the pc, but I have treid to opencoy to my USB, he initially said no space and I deleted files. ND, then I tried to copy these fields to it, I got this error message:

  0 x 80070052

  and I think that it is aa problem with my antivirus it diesnt run correctly.

  pelase advise I can't afford lossing my documents.

  Thank you

  Hello

  Error 0 x 80070052 occurs usually when you try to copy files to an external storage device. You can format the drive to the FAT32 file system format and check if this solves the problem.

  Come to your icons of files problem, I suggest you perform a system restore to restore the computer to an earlier point in time before the problem occurred.

  See these articles for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Robocopy hangs when you try to copy a file which in use

  Hello

  I find that Robocopy hangs when you try to copy the file using, for example an Outlook .pst file. The behavior of Vista was not to copy the file according to the retry and wait switches from command line, which allowed the backup race move to the next file and finally finish. With Windows 7 the Robocopy session is suspended and resumes ever, even if the file she is trying to copy is closed.

  Is this behavior under Robocopy in Windows 7? Is it possible to get Robocopy to move to the file according to when he's trying to copy a file that is in use?

  Thank you

  Jason.

  "There is no need of me a pause in my script"-Yes, I understand [and should have done before].

  I just tested a network for the first time operation.  It hangs forever as your done even after I closed Outlook & waited for the w: 30 I put.  {I also ran with closed Outlook the first time just to make sure that the network itself had no problems}

  I read that you have provided the link.  This suggests that there is no solution.

  - - - - - - -

  You seem to be doing a lot more & probably more structured than mine operation, this workaround might not be of any use to you.  The other open files issue concerns a simple hourly backup of my kernel files that includes pst files.

  1 I xcopy all the files in a folder internal InterimBackup first.  Can I use XCopy or RoboCopy to send InterimBackup to the real destination.

  2 If Outlook is open then it will copy on InterimBackup and, if the previous Outlook.pst is still in InterimBackup she gets deleted by the attempt of xcopy.  [conclusion - XCopy verifies the existence of the replacement of a file, deletes it and only then discovered that the source file is locked and cannot be copied.]

  So I precede this with

  0 I run [if exists] copy D:\InterimBackup\Outlook.pst to D:\InterimBackup\Outlook2.pst

  The result is that whole process always ends but it only includes the last Outlook.pst that was available.  So I always make a point of Outlook to quit at some point during the day so that he could take part in this backup.

  If you have also tried this as a two part operation, your xcopy / robocopy in the folder InterimBackup would always succeed but would include only Outlook.pst if you had first closed the application.  Subsequent operation of RoboCopy would always succeed with the same possible omission.

  The downside of this might not suit your overall goal.  You'd have to RoboCopy separately all your others folder trees but keep the Outlook.pst in a tree that has not been included.  You could do this either by restructuring of your data or using RoboCopy exclude switches for the file Outlook.pst file.

  You have to accept that you might not be sure about the last time that the Outlook file had been included unless you had deliberately run the RoboCopy closing.

  I have reviewed this improvement by using Task Scheduler to respond in the event of closing Outlook and use it to initiate the copy outlook.pst to InterimBackup, then by running the part of the main operation on RoboCopy to this folder.  But my needs are so simple that I've never felt it's the logs of the events that I would have to put in place.

  As I say, it may not meet your needs.

• I get an unknown error message when you try to copy a cassette of my video camera, but the camera connect

  I get an unknown error message when you try to copy a cassette of my video camera, but the camera connect

  If you are running Windows XP... There is a slight chance
  that by running the following command would be the fix:

  Reach... Start / run... and type or copy / paste the following text:

  regsvr32 %windir%\system32\qdv.dll

  Then... Press on... Come in...

  You should see a dialog box stating:

  DllRegisterServer in C:\WINDOWS\system32\qdv.dll successful

  Good luck...

  There is debate on this subject in the following forum:

  Windows Movie Makers Forums
  An unknown error has occurred

• Windows Explorer crashes when you try to copy a file

  Win xp Pro

  When you try to copy a file using windows Explorer, the application crashes. I tried to use select times of right mouse and select menu with the same results.

  All solutions short of re - install XP

  Win xp Pro

  When you try to copy a file using windows Explorer, the application crashes. I tried to use select times of right mouse and select menu with the same results.

  All solutions short of re - install XP

  This happens with any file or a particular file?

  Have you tried the copy command from a command prompt window (start > run > cmd > OK)?

  For the full syntax of the copy command, see http://technet.microsoft.com/en-us/library/bb490886.aspx

• 1001 error code in the registry when you try to remove an old program using programs and features in Control Panel. How can I fix?

  1001 error code in the registry when you try to remove an old program using programs and features in Control Panel.  How can I fix?

  Computer Windows 7

  Tried to reinstall the older version, she received error 1001 something again with the registry.   Does not remove old software.

  Hi Carol,

  1. what program or software you are trying to delete?

  2. What is the code or an exact error message?

  Please provide us with more information on the specific question, to find a solution as soon as possible.

  Follow the link below and check them with the question:

  Solve problems with programs that cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

   

  I hope this helps.

• Error 0 x 80070079 windows 7 x 64 win7 - when you try to copy large files to USB. The semaphore timeout period has expired. Help, please!

  Any file larger and begins to copy and Quen stops about 95 to 98% before its finshed. This is some time and comes back with an error 0 x 80070079: the semaphore timeout period has expired. If I boot in safe mode, I get the same thing. I applied http://support.microsoft.com/kb/976972 and it did not help me. Help, please!

  I have Dell XPS9000, Win7 Premium, x 64, I7/920, Nvidia 260, 12 GB of RAM

  Hello

  Thanks for the reply Thahaseena. I think a lot of people have the same problem and it's partially the fault of Microsoft. It is the solution of the problem that works for most people if the heart of the problem is corrupt USB driver (s). The USB driver might get damaged due to defective USB device. This was my case. I bought the 16 GB Sandisk USB which has serious problems. It seems that it is real default, rather than fake. However, I am still investigating.

  This is what happens:

  -Start the copy of the file and at one point gets stuck. After all, you get that infamous error 0 x 80070079. If you try to shoot this defective USB before the error pops out, it's really dangerous abduction of USB that could cause corruption of the driver for the USB controller. This happened to me. So, after this point, none of the USB devices will be capable of the greatest copy files 1 GB +, because my USB drivers are now corrupt and and the transfer is slower. Fast devices and more small files work great, but if you have low speed USB 2.0 device it will not be able to complete the transfer of files at one time and you will receive the error.

  Solution:

  -Stop using the defective device to avoid a repetition of the problem (if you know who is defective). If you do not know, must be eliminated one by one.

  -Disconnect all USB cables except the keyboard cable (at least that is not based USB)

  -Use tabs and the arrows on the keyboard to get to Device Manager

  -Remove all usb drivers, including the one that is connected to the keyboard

  -You may need to force the closure - the dawn of the computer.

  -Do not turn on computer. Get on your knees and unplug the power cord. If you forget this step, the process of booth PC will load faulty driver again. (faulty or bad it depends on the scenario)

  -By unplugging the power cord and let it stay for at least 5 minutes, you force your PC to renegotiate the devices and drivers

  -Connect all USB cables

  -Check the usb status icon in the status bar. Sometimes, you may need to restart the computer if windows asks you to do. Restart the computer if you are not sure what I'm talking about.

  - and... Here we are. Bingo!

  Now, if you plug the faulty device once again, you will need to repeat the process. However, in my case I return to the seller or the manufacturer for repair. You can use this procedure to force the outcrop of USB drivers. That's why I say I blame partially Microsoft for that matter because there is no utility or command available to force this action automatically do that when the problem occurs. This could potentially help people with the question when a few USB ports stop working if its pilots involved.

  If it worked for you, please press useful Votes.

  Thank you.

  Ntongo

• error message 0 x 80070570 when you try to delete files

  I get this error message when you try to delete files on my hard drive. I would be greatfull if any 1 can help me remove these files.

  Hi Waltergaller,

  1. What is the accurate and complete error message you get?
  2. what files you are trying to delete?

  Method 1: See the link below and follow the steps to remove the file.

  Why can't I delete a file or a folder?

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-cant-I-delete-a-file-or-folder
  
  Method 2: if the steps above did not help, then you can also try to remove the file getting mode without failure. See the link below to start the computer in safe mode.

  Start your computer in Mode safe:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
  
  Method 3: if the step above does not work then, I would say allowing you to run a scan on the Hard drive using the Microsoft Safety Scanner and check if she is infected with the virus.

  You can download and run the Microsoft Safety Scanner from the link provided below.

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: when you do an antivirus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

• error 0 x 80070052 when you try to copy files to a USB

  Original title: error 0 x 80070052

  When you copy a file on a USB key, I get error 0 x 80070052 - failed to create the directory or file. Here's the odd part. When the file is named "114721_typ.jpg", I get the error. When he was appointed "114721_ty.jpg" I don't get the error. (Same file renamed.) When you rename the file is not an acceptable solution, because the files are installed by an installation program and must be used with the original names. If I copy the file and try to change the name to add the last letter that will fail. Good luck to find this one!

  Hello

  Thank you for writing to Microsoft Communities. From your problem description, I understand that questions from the front during the copy of the files on the USB key. Please correct me that I misunderstood.

  I suggest you to follow the steps suggested by Fahimulla K and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/error-0x80070052-the-directory-or-file-cannot-be/a5f86b63-03a0-4B8A-92c7-2f3729ed35a1?msgId=09ddbecf-119c-4C02-93F4-1cc75696decd

  Try the steps mentioned in the link and come back if the problem persists while we can help you to repair.

• 0 x 80070035 and 0X80004005 error codes when you try to connect to other computers and devices on the same network - unable to connect to the shared devices.

  I have a network consisting of Windows 7 laptop computers, an XP laptop and a Wireless Linksys (Cisco) WRT610 N + N with storage attached to it via its USB port.  Your PC Windows 7 has, since I can see and access to other computers and devices on storage.  Since Windows 7 PC B I can not connect (via the file manager) to A PC or NAS storage network.  Get such as 0 x 80070035 and 0X80004005 error codes when you try to connect to the IP address on the device name.  When I ping the devices of PC B I have no trouble to achieve.

  I turned off all firewalls, added the LMHOST file entries and a myriad of other tests and still cannot connect to PC B devices.  I can surf the net fine and do everything else - simply cannot connect to other devices even if these other devices can connect to me.

  I was in there for 22 years and has worked as an engineer on major networks and the network I stem - anyone got any idead. I checked all the basics such as Netbios, file sharing etc etc.

  It took a reinstall (upgrade) to get actually it works again.

• Error code 0 x 80040609 when you try to update Windows

  Original title: Error Code 0 x 80040609, what to do now?

  It's the 2nd or 3rd time I went through it, each of the error codes w / different when you try to update.  What should I do now?

  Hi lulubell69,

  1 Windows operating system you are using?

  2. the Windows updates you trying to install?

  3. have you tried to install the updates manually?

  4. where exactly you try this errors?

  Method 1:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2:

  a. you can try to download and install the stand-alone package of the update from the Microsoft Download center.

  http://www.Microsoft.com/downloads/en/default.aspx

  b. Enter the KB number for the update and press ENTER.

  c. double-click on the downloaded file.

  d. you can either click Run to start the installation or you can click on save and save it on the desktop and run the installation once the update is completely downloaded.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error code 0 x 80040154 when you try to run Windows Update

  I get the error Code 0 x 80040154 when I try to run Windows Update. Need help!

  Hi Linda,.

  Are you sure that the Virus has been completely removed from your system? The behavior you describe looks like maybe it's still there, or there may be damage he did while he was in your system.

  You can try running this repair order: http://support.microsoft.com/kb/929833

  Also run this tool: http://support.microsoft.com/kb/947821

  and see if there are damaged/corrupted files.

• How to fix error 646 windows code 7 when you try to install updates?

  error code 646 on windows 7 when you try to install the updates

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/043e5807-575d-45e7-9320-1dc415b5ee20

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/7fbfee2a-70d9-4007-A565-ee1b6d8f018d

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.