Commissioning user of failing AD after AD Connector upgrade

Similar Questions

• Active Directory user confidence and target user Recon fails for an ORGANIZATIONAL unit

  Hello

  Active Directory trusted user and target user Recon fails for single ORGANIZATIONAL unit and others to run correctly.

  We get the "the server does not support the requested critical extension.

  I read, we must use the entrance of page size of the definition of Lookup.Configuraiton.ActiveDirectory or Lookup.Configuraiton.ActiveDirectory.Trusted search for settting granular level.

  I looked into this research and got the PageSize as 1000. So, does that mean? How to use the pagesize?

  It's the user Trusted Recon Brio ST AD

  

  Thank you

  After increasing the value of pagesize, jobs are working well.

• my windows vista starts normally until I have pass the user coice screene. After that, I see the cursor but everything is black. What should I do? Thank you very much!

  my windows vista starts normally until I have pass the user coice screene. After that, I see the cursor but everything is black. What should I do?

  It was probably caused by the removal of any file system as I was scaning the pc for malware and probably deleted some important file. only safe mode works now
  and I need my computer quite urgent for the University.
  Thank you very much!

  Hello

  No saving necessary data and re-installing Windows Vista might be the best option, but here
  are a few others.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
  ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
  repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• User - Auto-Off function after comments "Check disk" for Win 7 & Win 8 is over

  Hello

  Hard disk for error checking and fixing it is a routine system for Office PC network maintenance, if the user is to have performance at all times.

  The last PC has a hard drive of 500 GB to 1 TB size and many files for sanning. If will take about 10-20 minutes to perform the task. Generally it is not recommended to do so due to the timing tight work at office hours. Most of the office user prefer to do after working hours leaving their PC on for scanning. To Win 7 & Win 8 do not have an auto-off function after completion of the task of "Check Disk". The PC must be on during the night after scanning.

  For energy saving, I would suggest a new feature that allows the user to choose to shut down their PC when the task is completed.

  Thank you

  Low

  Hey Joe,

  Thanks for the code of your order.

  Can I know how to run this command? I still have to go in my computer > C drive > right click > properties > tool > Check Disk to perform this task?

  I use the desktop PC network in which I am not an administrator, what I'm looking for the assistance of the administrator to create this file in my PC?

  If I want to check the disk with this command, do window 7 / 8 allow me to do?

  Thank you

  Low

  Hello

  Thanks for the reply. The commands shown above are content to a Windows batch file. You simply create the Windows batch file using Notepad. The steps posted above shows how to create a file Windows specific command and its content. It then saves at a given location. You can then open the Windows created batch file to process orders (content).

  No, it's all just a new file, we create with the .bat extension so that Windows will understand that the file we will create a Windows batch file. Thus, we will be able to run these commands at the command prompt. In DOS, OS/2and also Microsoft Windows, the batch file is the name given to a type of script file, a text file containing a series of commands to be executed by the Shell.
  Unfortunately, chkdsk requires administrator privileges to run correctly. You need to run the command of Windows as Administrator file to run all the commands, but you don't need administrator privileges to create the file. Even check the disc from the properties of the disc requires administrator privileges. You must be the administrator of your operating system, but not the administrator of your network.
  Windows will not prompt you to rerun the command of Windows as Administrator file. Instead, it will show you an error message indicating that you are not an administrator, and the command will not run if the Windows command file, you try to run contains commands that require administrator privileges, and you tried to run the command of Windows under a limited user account file. To avoid this problem, start the batch file to Windows as an administrator to ensure that all commands in the Windows batch file will run correctly.
  The commands shown above will do the following
  • Turn off echo command
  • Scan the drive DriveLetter errors found during the analysis of fixation
  • Shut down the computer after 0 seconds

  Note: to run a particular file as administrator, right click on the file and select run as administrator
  Thank you
  I hope this helps :)

• TimesTen - 7001: user authentication failed when using XLA

  I installed TimesTen 11.2.1.8.0 on AIX 5.3 System.* user 'oracle '. I created another user of the application 'risk' to use in my application with TimesTen.

  When running my application with the user 'risk' to connect with TimesTen it is OK. But when I want to use the XLA feature, when I call the createDurableSubscriber function, it returns the error

  javax.jms.JMSException: failure of SQLDriverConnect (XlaCommon.c, line 48): S1000 7001 [TimesTen] [driver ODBC of TimesTen 11.2.1.8.0] TT7001 [TimesTen]: user authentication failed - file "db.c", lineno 9722, procedure 'sbDbConnect '.

  It is strange that if I switch to user 'oracle', it works fine.

  Can someone please help understand the reason why.

  Thank you

  You created the user 'at risk' within your TimesTen database?

  CREATE a USER risk IDENTIFIED BY 'some password'?

  You granted the privilege of the user risk to use XLA?

  XLA GRANT at risk;

  Have you used this user name and password in the JDBC URL when connecting to the database application JMS/XLA?

  The 'oracle' user is probably your admin user of the instance (which is the database root) and therefore can use all the features without special action (but of course you never run application as that user).

  Chris

• After that the upgrade of my URL bar no longer displays the Protocol.

  After that the upgrade to Firefox 7.0 my URL bar is no longer shows me what protocol is used when you use http port 80. How can I turn this feature on?

  The Protocol (http://) was removed from the URL in the location bar for pages http:// only. https:// pages will always have the Protocol. This can be confusing for some users. There is also a bug known, where if you copy the URL after selection of the awesome bar dropdown (but before loading the page) it does not include the http:// part.

  Users can revert to the old behavior by setting browser.urlbar.trimURLs to false in about: config

  1. type of topic: config in the URL/address bar and press the Enter key
  2. If you see a cautionary, accept it (promise to be careful)
  3. Filter = browser.urlbar.trimURLs
  4. Double-click the pref in the lower panel of toggle it on 'false' OR , do a right-click on the pref in the lower panel, then choose "Toggle" switch it on "false."
  5. close the topic: config tab

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• After the recent upgrade Indesign creashes at startup. Error related to FontManager

  CTC 2015 last rev.

  S.O. Windows

  After mid June upgraded Indesign crashes at startup.

  Windows reports:

  Nome dell' application che ha generato error: InDesign.exe, version: 11.4.0.90, time stamp: 0x574c8600

  Nome del modulo che ha generato error: MANAGER of FONTS. RPLN, version: 11.4.0.90, time stamp: 0x574c88c4

  Exception code: 0xc0000005

  Compensate for the error 0x000000000006e64d

  ID processo che ha generato error: 0x15b4

  Ora di d dell' application che ha generato error: 0x01d1cc575009eecd

  Percorso dell' application che ha generato error: C:\Program Files\Adobe\Adobe InDesign 2015\InDesign.exe CC

  Percorso del modulo che ha generato error: C:\Program Files\Adobe\Adobe InDesign 2015\Required\FONT CC MANAGER. RPLN

  Segnalazione ID: 908d0d08-384a-11e6-9da9-386077ce4453

  This has happened on 2 different PCs, a resolved after reinstalling SW, the other problem woth yet.

  Hi all

  We are aware of the problem where InDesign crashes on launch while working with library files stored on a network location.

  We are working on resolving the issue and for the moment, please try the solution that we have identified.

  To work around the problem, please follow the steps below:

  Clear the Cache InDesign either by renaming the Cache folder or deleting it altogether. (It is best to rename the folder)

  The location of the cache folder: -.

  Windows XP: C:\Documents and Settings\Settings\Application Data\Adobe\InDesign\------\Caches\

  Windows 7 or 10: C:\Users\\AppData\Local\Adobe\InDesign\-\Caches\

  Macintosh: Drive hard/users/InDesign/Library/Caches/Adobe///.

  In addition, if your workflow requires you to work with the (different) library placed on the network, please make sure you close the library panel before leaving InDesign.

  Concerning

  Afonso

  (InDesign engineering team)

• My apple ID became invalid after the recent upgrade to ios 9.3

  My apple ID became invalid after the recent upgrade to ios 9.3. What can I do to reactivate the ID? I tried to reset my password several times even.

  For now, I am unable to pay for anything because I can't access the function of apple on the phone pay.

  Hello

  Follow the instructions here, include a link to get help from Apple with your Apple ID:

  If your identifier Apple is locked - Apple supports

• How to keep the content of persistStore after the software upgrade?

  I use persistObject to store a variable in the program, once I changed some work and update the new version of the device, I found that the historical data are passed. How to store history data after the software upgrade? my software is auto-start at the start of the unit, in order to update you have to restart the device.

  If the size of the object you store changes, and then it gets deleted.

  If you change the name of the package where you saved the object, then it will fade.

  I usually have with ropes to keep them always upgrades throughout.

• BlackBerry Z10 problems after the software upgrade

  After the software upgrade on my z10 I not receive notification for my text, whatsup and other notifications in my hub. Pls help

  I would try to reset your Hub first.

  Open the Hub and from the upper right corner, with the fingers sliding down to the center of the screen five times.

  You will see quick white screen, then a black screen with the text that the hub is set to zero.

  If after a day which not resolves your notifications, remove the twitter account of your settings > accounts, restart the BlackBerry, and add the new account.

• problems with rv042g after the software upgrade

  After the software upgrade it reboot the router on every 45 seconds

  I tried this tool from Cisco RV0xxV3_FirmwareRescueUtility_v4.0.0.7 Web site without success, the problem is there, is one way that you can get the router up and running again?

  Can I run a TFTP server and download new software, or I ther a FirmwareRescueUtility for rv042g?

  Mogens Demmark

  The first firmware comes with RV042G is 4.2.0.03, so the firmware utility rescue v4.0.0.7 would not work.

  Given that your will to power cycle automatically RV042G every 45 seconds, and the problem has not disappeared after that you did a reset to factory default, the unit needs a new firmware downloaded. Please, try the following steps.

  1. disconnect the power cable to the unit.

  2. hold the reset (using a paperclip) button, while plugging in the power cable.

  3 look at the DIAG LEDS.

  4. release the reset button when you see the DIAG led are flashing.

  5. a flashing DIAG indicates that the unit runs in start mode, and a server tftp on the device is waiting for a picture of fresh firmware to the address 192.168.1.1.

  6. set up your PC with an IP address in the subnet 192.168.1.x, e.g. 192.168.1.100 and specify as default gateway 192.168.1.1.

  7. try to ping the unit with 192.168.1.1, and you should see a response from the unit.

  8. run a program client tftp (with a command line) and push an image good firmware, for example

  TFTP-I 192.168.1.1

  If the procedure above does not resolve the problem, contact the support center for RMA.

• Device base system driver code (28)... I use a sony vgn z555dn laptop after I've upgraded to windows 7 this is the error that I can't fix all the others, I managed to solve... Please help

  Remember - this is a public forum so never post private information such as numbers of mail or telephone

  Device base system driver code (28)... I use a sony vgn z555dn laptop after I've upgraded to windows 7 this is the error that I can't fix all the others, I managed to solve... Please help

  Hello

  You updated the BIOS and motherboard (chipset drivers)? All device drivers? By checking
  manually on the link above?

  If so you need to contact the Sony Support as the error is in the provided OEM drivers and not
  Windows 7.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• After that the upgrade of os josemite cs4 applications will not work. Message that I need to install the legacy java SE 6 runtime. Is it necessary to set the loading application?

  After that the upgrade of os josemite cs4 applications will not work. Message that I need to install the legacy java SE 6 runtime. Is it necessary to set the loading application?

  Found the answer:

  Java for OS X 2014-001 includes improvements to the installation and replaces all previous versions of Java for OS X. This package installs the same version of Java 6 included in Java for OS X 2013-005.

  installed above and it works now

  Blessings

• lost all my colors and stacks of custom font I place after that I upgraded to 20141 is this normal

  lost all my colors and custom font stacks that I place after I've upgraded to 20141 it is normal and this will happen whenever I update.

  Hi mi32dogs,

  The October release is a new version completely and not and update to the previous version. As the colors and custom fonts are not migrated, you don't see them.

  It won't happen if you update to an existing version.

  Thank you!

  Kusha

• Questions in OPA Siebel Connector upgrade to 10.3

  Hello
  
  We have improved OPA Siebel Connector upgrade to version 10.3 10.2. We have performed all the steps in the installation guide and deployed the 10.3 rulebases to tomcat apache (application server that we use).
  
  When we click the button 'Test smoke DS' or 'DS IO smoke Test', we get the following error:
  
  Error service call 'Policy Automation Server IO determination', 'AssessIO' method in the step "to call evaluate IO." (SBL-RPR-00162)
  HTTP request error when the "request submitting data SendHTTP ': 'State - 503 code' (SBL-EAI-04117)
  
  The port address of the service for the outbound web service "DeterminationServerIO" is:
  
  http://172.18.113.11:8080 / siebel-determinations-server/assessio/SOAP/AdminSmokeTestIO
  
  and for "DeterminationServer":
  http://172.18.113.11:8080/Siebel-determinations-Server/assess/SOAP/generic/10.0/AdminSmokeTest
  
  We can see the deployed rulebases (AdminSmokeTest and AdminSmokeTestIO) WSDL files in the following path:
  
  http://172.18.113.11:8080 / siebel-determinations-server.
  
  Also the buttons work correctly in the dedicated client, but it does not work for thin client.
  
  Waiting for reply!
  
  Thanks in advance!
  
  Kind regards
  ALIOU

  ALIOU.

  From the looks of the newspapers, it is call the correct URL and to return a 503 error. We know that the Service is running and works from a fat client.

  The only real differences between thin and thick clients should be the machine that demand comes from (Server siebel for the client, the client computer for the thick client), and the used .srf (thick client that uses its own .srf, lightweight client relies on the used by the Siebel server .srf.)

  1 there is something strange on the thin client application.
  -check the logs in Siebel determinations server to see if it is receiving the request and then return an error (unlikely)
  s ' ensure that the .srf which uses the Siebel server is up-to-date (customer copy heavy to the siebel server .srf).

  2. any security or a firewall preventing the application of the Siebel server.
  -see if you can contact Siebel determinations from the Siebel server server.