BlackBerry Z10 problems after the software upgrade

Similar Questions

• problems with rv042g after the software upgrade

  After the software upgrade it reboot the router on every 45 seconds

  I tried this tool from Cisco RV0xxV3_FirmwareRescueUtility_v4.0.0.7 Web site without success, the problem is there, is one way that you can get the router up and running again?

  Can I run a TFTP server and download new software, or I ther a FirmwareRescueUtility for rv042g?

  Mogens Demmark

  The first firmware comes with RV042G is 4.2.0.03, so the firmware utility rescue v4.0.0.7 would not work.

  Given that your will to power cycle automatically RV042G every 45 seconds, and the problem has not disappeared after that you did a reset to factory default, the unit needs a new firmware downloaded. Please, try the following steps.

  1. disconnect the power cable to the unit.

  2. hold the reset (using a paperclip) button, while plugging in the power cable.

  3 look at the DIAG LEDS.

  4. release the reset button when you see the DIAG led are flashing.

  5. a flashing DIAG indicates that the unit runs in start mode, and a server tftp on the device is waiting for a picture of fresh firmware to the address 192.168.1.1.

  6. set up your PC with an IP address in the subnet 192.168.1.x, e.g. 192.168.1.100 and specify as default gateway 192.168.1.1.

  7. try to ping the unit with 192.168.1.1, and you should see a response from the unit.

  8. run a program client tftp (with a command line) and push an image good firmware, for example

  TFTP-I 192.168.1.1

  If the procedure above does not resolve the problem, contact the support center for RMA.

• How to keep the content of persistStore after the software upgrade?

  I use persistObject to store a variable in the program, once I changed some work and update the new version of the device, I found that the historical data are passed. How to store history data after the software upgrade? my software is auto-start at the start of the unit, in order to update you have to restart the device.

  If the size of the object you store changes, and then it gets deleted.

  If you change the name of the package where you saved the object, then it will fade.

  I usually have with ropes to keep them always upgrades throughout.

• Handset of blackBerry Smartphones frozen during the software upgrade.

  Hi this morning, I tried to upgrade the software on my new "BOLD", almost 6 hours later the phone is always showing 16% done and haven't done anything since. If you disable the handset it again with the same screen showing the current download. No function can be used at all, Tmobile (provider) are of no use and I can't get from the site Web de Blackberry troubleshooting tips! Can someone please help me because my camera is now a brick

  concerning

  Micky

  What is backup hanging from the Social RSS or smart card Options?

  Read this: Article ID: KB29522 "Error in backup of databases" message is received to the Options smart card database when you save the smart phone BlackBerry with the BlackBerry Desktop Software

• BlackBerry Z10 problems with the battery while using the LTE

  Given that I am connected to LTE (4 G) battery is not longer than 8 hours. Is this normal?

  Use of the battery can vary from one user to another, based on dozens of factors, including running applications, intensity of the mobile signal, the overall health of battery, use of data, etc. There is no use of a normal battery without comparing many factors.

  But 8 hours use of the battery can be normal that Q10 with moderate to heavy use in an area with a great LTE signal at least.

• Problems with the software of fax on 1536dnf

  Hi, I just got a 1536dnf all-in-one, and I have a problem with the software sending faxes. I can fax machine directly, but when I try to send a fax from my computer, I can't even get into the software. I get an "internal error" that there is no device detected. I installed it on my network, so about four different computers can access. I'm running Windows XP SP3 and any other function works fine (I can print to the printer from each computer, send and receive faxes from the printer itself, etc.).  Any ideas why this happens? I found zero documentation or help on this and any help would be appreciated.

  Thank you.   I was using FAX4Word plugin for Word.  It allows to easily print/fusion of fax machines.

  I answered my own question, but others may be interested in:

  I was buy HP printers since the time that first, they came out with the LASERJet House, I waited in line to get one at the then price of $700 or more.  I bought a HP product on average every 3 years after that.   All HP products were excellent quality and easy to use.

  Once I looked at the question of the use of the 1536dnf as a modem, I found that I was MUCH better off just buying a modem from "Zoom" $ 50 for my database driven fax needs rather than trying to send it through the HP.  If it is possible to use the 1536dnf as an intuitely MODEM, it is a solution too complex to simply get a modem to 'Zoom in' $50, which leaves my 1536dnf available for other tasks.

• big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work

  big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work with my beloved Photoshop!

  Yosemite upgrade very often damage existing Photoshop.  I thank Apple for that.

  You must uninstall and reinstall Photoshop, then apply all the updates of Photoshop from scratch.

  But first, give us details about your configuration:

  STANDARD TEXT:

  Note that it is standard text.

  If you give complete and detailed information on your configuration and the issue,

  as your platform (Mac or Win),.

  accurate versions of your operating system, Photoshop (not just "CS6", but something like CS6v.13.0.6) and the bridge.

  your settings in Photoshop > Preferences > performance

  the type of file you were working.

  specifications of the machine, such as total installed RAM, scratch file HDs, total available disk space, video card specifications, including total VRAM installed.

  What troubleshooting steps you have taken so far

  what you receive, error messages

  If problems of opening raw files also the exact camera brand and model that generated

  If you experience problems printing, specify the exact brand and model of your printer, the size of the paper, the dimensions of the image in pixels (so many pixels wide by pixels high). If going through a TEAR, specify that too.

  A capture of your settings, or the screen image could be very useful also,

  etc.,.

  someone may be able to help you (not necessarily this poster, which is not a Windows user).

  Read this FAQ to get advice on how to ask your questions correctly to get faster and better answers:

  http://forums.Adobe.com/thread/419981?TSTART=0

  Thank you!

• How to make El Capitan to recognize my Canon printer I've done what I think is everything: one clean install of El Capitan (another problem); Reinstall the software from the CD; Anon same impression reset. No luck at all.

  How do El Capitan to recognize my Canon printer? I did what I think, that's all I can: clean install of El Capitan (another problem); Reinstall the software of Canon from the CD; same impression reset - my printer shows not yet up! I tried LAN and USB.  No luck at all. The printer does not yet appear upward on the tree of USB in the reporting system.

  What printer model Canon...?

  kologano wrote:

  The printer does not yet appear upward on the tree of USB in the reporting system.

  This looks more like a bad USB cable or bad printer.

• There was a problem downloading the software for the iPhone error - 39

  My iPhone 4S device is disabled, connect to iTunes, when I was connected to the laptop cannot restore and give this massage:

  There was a problem downloading the software for the iPhone "iPhone". An unknown error occurred (-39).

  Make sure that your network settings are correct and your network connection is active. or try again later.

  Hi mgdabko!

  I see that you get an error message when you try to connect your iPhone to iTunes.  I know it's important to have your iPhone works properly, and I'm happy to provide assistance.  39 error often indicates there is a problem with the internet connection you are using, so you should try another Internet if possible.  You can also try all the advice in the following article:

  If you see an error when you update or restore your iPhone, iPad, or iPod

  Thank you for using communities of Apple Support.

  See you soon!

• My apple ID became invalid after the recent upgrade to ios 9.3

  My apple ID became invalid after the recent upgrade to ios 9.3. What can I do to reactivate the ID? I tried to reset my password several times even.

  For now, I am unable to pay for anything because I can't access the function of apple on the phone pay.

  Hello

  Follow the instructions here, include a link to get help from Apple with your Apple ID:

  If your identifier Apple is locked - Apple supports

• I'm having problems after the restart with docking station, applications, etc.

  OS X: 10.11.3

  Mac Pro 2010 2 x 2, 66 GHz 6-Core

  Graphics NVIDIA Quadro 4000 card

  24 GB Ram

  50 GB of free memory

  4 additional hard disks

  Hello community,

  I have a strange problem, after the mac is restarted, even when I decide not to join his joined apps a former State of the saved request. I can't make changes to the dock, after restart it restores an old state. When I try to import or save something in any application you see normally last modified files, yet his watch an old state. When I try to delete files that I always put my password, it's new. Im confused, I'm a long-time os x user since 1999 has never had this kind of problems.

  Help, please.

  Lars

  Please, back up all data before proceeding.

  This procedure will unlock all your user (not system files) files and reset their ownership, permissions and default access controls. If you have voluntarily set special values for these attributes on any of your files, they will be be restored. In this case, either stop there, or be ready to recreate the settings if necessary. Do that after checking these settings that did not cause the problem. If none of that is meaningful to you, you need not worry about this, but do not follow the instructions below.

  Step 1

  If you have more than one user, and the one in question is not an administrator, then go to step 2.

  Triple-click anywhere in the next line to this page to select this option:

  sudo find ~ $TMPDIR.. -exec chflags -h nosappnd,noschg,nosunlnk,nouappnd,nouchg {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing Command + V. I tried these instructions only with the Safari browser. If you use another browser, you may need to press the return key after pasting.

  You will be asked your password of connection that are not displayed when you type. Type carefully, and then press return. You can get a warning to be careful. If you do not have a password, you will need to configure one before you can run the command. If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator.

  The command may take several minutes to run, depending on the number of files you have. Wait for a new line ending with a dollar sign ($) to appear, and then quit Terminal.

  Step 2 (optional)

  Take this step only if you have trouble with the phase 1, if you prefer not to consider, or if this does not resolve the problem.

  Start in recovery mode. You may be prompted to select a language, then the OS X Utilities appears.

  If you use FileVault 2, select disk utility, then select the icon for the volume FileVault startup ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Click the Open button in the toolbar and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  Select

  Utilities ▹ Terminal

  in the menu bar. It will open a Terminal window. In this window, type this:

  resetp

  Press the tab key. The partial order you entered will automatically end this:

  resetpassword

  Press return. Opens a window to reset the password. You do not need to reset a password.

  Select your boot volume ("Macintosh HD", unless you have given it a different name) if not already selected.

  Select your username in the menu option allows you to select the account if not already selected.

  Under Reset Home Directory Permissions and ACLs, click the reset button.

  Select

  ▹ Restart 

  in the menu bar.

• There was a problem downloading the software for the iPhone. The network connection timed out.

  Original title:
  Network discovery sharing sharing inbound network incoming Remote Desktop RDP TS Remote Desktop Remote Assistance Network
  -----

  My computer can not down load the version the most recent for my I Phone it says:

  There was a problem downloading the software for the iPhone. The network connection timed out.

  Make sure your network settings are correct and your connection is active network, or try again later.
  IM Online hole time and ive tried for months

  Hello

  ·         What software you want to download?

  ·         You have an earlier version of the software installed on your computer?

  Method 1:

  Try to download the software by disabling add-ons: http://windows.microsoft.com/en-us/Windows-vista/How-do-browser-add-ons-affect-my-computer

  Method2:

  Try disabling the anti-virus and then check if you can download the program.

  NOTE: make sure that you enable the antivirus protection as soon as the diagnosis is completed.

  Method3:

  Reset Internet Explorer, and then try to download the file: http://windows.microsoft.com/en-US/windows-vista/Reset-Internet-Explorer-7-settings

  NOTE: Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

  You can also post your questions on the apple forum by clicking this link: https://discussions.apple.com/community/iphone/using_iphone

• Error "Windows has encountered a problem installing the software driver for your device." Windows found driver software for your device but encountered an error trying to install it.

  So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get.  Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.

  Well, I found the solution, just in case anyone has the same problem.  Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.

• Hello good I would like to cancel the annual plan of adobe audition, because I had problems with the software and the Bank, if I can help with this please.

  Hello good I would like to cancel the annual plan of adobe audition,

  As I have had problems with the software and the Bank, if I can help with that please.

  Please contact customer support for cancellation & refund of the next purchase. Contact the customer service

  Creative single-app cloud membership for Adobe Audition (one year)

  Subscription Office

  March 11, 2015

  In the case of any questions, please let us know, I can certainly go for you.

  Concerning

  Baudier

• Remove a problem after the app is available in the AppStore

  Hello, everyone,

  I want to know if it is possible to remove a problem after the approval of Apple. I have a multi-folio application and I don't want to remove the entire application, only one edition of it.

  Can someone help me?

  TKS a lot.

  Renata

  TKS a lot, Johannes!