Communication server license error

Similar Questions

• Games on the Internet give the error "a network error occurred during communication with the game server. "Error code: 0 x 80041006.

  I ran the System File Checker tool analysis. Response has been no problem with the configurations. Also, I did uninstall and reinstall. I keep getting the message: "a network error occurred during communication with the game server. "Error code: 0 x 80041006 ' this error message occurs on all the computers I own.

  Actually, no, the answer in the links were also less than helpful... suggested this, that.  Things that I had already done b4 posting my question.
  More funny: after that I posted my comment about the fault is not not in my machine and those of thousands of others, but in MS, spades servers suddenly started working again.  Coincidence? No doubt, but still...

• license to make mistake.  Communication of license server.  problem already fuflfilled by another user.

  license to make mistake.  Communication of license server.  problem already fuflfilled by another user

  Hello

  Could you please develop your problem because we know not?

  Kind regards

  Sheena

• Video Communications Server "off call an impact."

  Hello

  I work with video Communications Server 8.1 and Lync 2013 trying to get them to work well together in a lab environment. In demo mode, the number of calls of course in demo mode is defined for a single call of course, a non-traversal call and three inscriptions. When I make a call between the two environments, in the system logs, I can see my Tandberg user successfully finding my user Lync in a test call. I see so two followed indicating error messages that the "resource unavailable - call resources" and "temporarily unavailable".

  It seems that I have at least a part of this correct installation (according to Cisco Tandberg and LYnc for VCS 8.1 configuration guide), but the demo license can prevent a successful of the set up call. Anyone can check it please what I see and my assumption is correct but also suggest where I can get a 30 day trial or something similar license that will allow me to use this environment?

  I thank all for the display and help, you may be able to provide!

  You did not mention how you have your registered your VCS - end point is H.323 or SIP or double registered?

  A VCS-> Lync appeal would use a traversal license.  This call is a SIP call, if your endpoint is H.323 endpoint, you need another license of crossing to the H.323-> SIP Interoperability - so it would be two crossed licenses (and the demo has only one).

  If you save your end point with SIP rather than H.323 for VCS, this should remove the interoperability (and reduce the permits required by one) so you should then be able to make a call (although without the authorization of "Microsoft Interoperability", you can still not get things 100% working).

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• problem with the expired Server license?

  2 problems
  1. get a warning: the server license expired message when you access the e-mail from comcast box?
  2-unable to complete the download of firefox update? error message, something blocking it - don't want to download everything again to avoid losing all the bookmarks and my custom settings!

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

• Activation of Server Terminal server licenses

  I have a question on a server terminal server licensing. I used the version of the Server Terminal server before 120 days. After that, I bought a server terminal server licensing by user. I called Microsoft to activate it. I was able to activate successfully. But how do I know Terminal Server that I use now is 120 days or active version? I saw no different between activate before and after turn on.

  Hey PantakarnSantawanphaet,

  For assistance with Terminal server please join the IT Pro community community TechNet link below:
  TechNet - Windows Server - Remote Desktop Services (Terminal Services)

• Server IO error

  Hello
  Post #1 so you can guess I'm new on this. I have CFMX 6.1 and have set up a link to a data source (file Access). Now, when I click on Browse Services (because I want to change the path of the target) I get an error of e/s on the Communication Server message. I looked at the Adobe support page and found the proposed fix. He said to open one of the XML files and remove the comment of a particular line indicators. But there is no comment in the file to stop working even when. Any ideas please? Any help gratefully received!
  
  

  Hi Tim

  After spending a few hours reading today upward and study, as a last resort, I did uninstall/reinstalling panacea CF. I think it turns out then when I installed initially, I had not managed to configure RDS as part of the installation process. It is now working very well.

  Thank you very much for your time
  Brendan

• There was a problem connecting to the server 'SERVER NAME' error guard appearing

  There was a problem connecting to the server 'SERVER NAME' error guard appearing even though the server is not on my current network.  I recently moved my iMac to a different location and a different network, and now he constantly tries to connect to the old server.  This message appears every 30 seconds and several of those who appear (see pictures) it's extremely frustrating because it makes the machine almost useless because I am constantly closing them.  No matter how many times I try to stop the activity monitor it it keeps reappearing, and I even tried a few terminal commands that I found online, then restarted the computer, but still had no success.  I would appreciate all the advice really.

  I hope that gives you an idea of what I got!

• How repair there is an Apple ID server connection error?

  How repair there is an Apple ID server connection error?

  Where to find similar solution anwer?

• Photosmart 5520: Scan to email: server connection error 403 (with app and scan)

  I scanned to send several times than I can count, but a few days ago, I get nothing other than the error "connection server 403 error." I checked the forums and someone said to go into apps and download the application. It did not work. I rebooted and tried everything, which he expects. Yet, nothing. Is this error to do with something outside as the real servers HPs - or is this something internal that I can fix it? I went as far as I can without resetting to factory settings (which I am fearful because I recently had the country code has changed on this issue and do not want to return to the country of origin), someone has any suggestions other than what I've sifted through the forums already?

  Hey @fruitfly20,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I understand that you have some problems with the scan to E-mail on your Photosmart 5520. I can help with that.

  We can try I couldn't see you is to remove and enable web services. To do:

  1. On the printer, click web services icon that looks like a tablet with a phone beside her.
  2. Click settings.
  3. Click on delete Web Services.
  4. Click again on the Web Services.
  5. Click on accept and Yes.
  6. Try scanning to Email.

  I would like to know if it works. If it does please not then let me know and we can try something else. Even if it solves your problems, so please let other users of the forum know clicking on accept as Solution below my post.

  I hope this helps and I hope you have a nice day!

• Web Services problem - server connection error

  Hello world.

  When I try to enable Web Services, I get an error. I am connected to internet (WiFi) and the connection is ok.

  The error is:

  Server connection error

  The printer could not connect to the server. Check the internet connection and try again, or enter a proxy address.

  I do not have a proxy, and the internet connection is ok! Why do I have this problem?

  Thank you very much.

  We will set an IP address of the printer:
  
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). You can find the beach DHCP from the router using its internal settings page or in its manual. Use the CD that came with your router or type the IP address of the router (ends para.1) in a browser.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the bridge and the first DNS. Let the second white.< the="" dns="" could="" be="" your="" problem.=""  if="" this="" does="" not="" work,="" try="" google's="" dns="">
  -Click 'apply '.
  
  Now, stop the router and printer, start the router, wait, and then start printing.
  
  After that, you will have to redo 'Add printer' using the new IP address.

• Office Communications Server 2007 R2.

  Office Communications Server 2007 R2.

  My OCS R2 server is fully functional internally. I have a problem with Live Meeting, audio sound system works internally without any problems, but when my external users connected to the live video meeting worked well but Microphone icon is grayed out for all users. I've been checking all the settings and everything looks ok. Can someone help me please...

  This question is part of better in the TechNet forums, where server gurus hang out.  This forum supports people who have questions or problems with Windows and the performance of their computer.

• Qustions on server licenses

  Hi, I'm new administrator COMPUTER within our company and I prepare a deployment plan update for the company's servers.

  I'm planning to get 1 x SBS 2011 + SBS 2011 Premium add-on 1 x + 2 x Server 2008 R2 Standard.
  My company uses SBS 2011 as Exchange and AD server. We get bonus add on for SQL server that is used to store data in Microsoft Dynamics NAV, which is on 3 Server on the secondary server (Server 2008 R2). Fourt server will be used as satellite Server (to run AD RODC + File server).

  Our SBS 2011 server have 40 users (shared files + exchange), Microsoft NAV is used via TS by 20 users and branch, we will have about 10 users.

  How many user / device CAL do I need for all facilities? Can I need separate CALs for all servers, or I just need CAL to the main server (SBS, 2011 which will be held in AD DS)?

  Thanks a lot for all the replies.

  Hello

  Because the problem is related to Small business server licensing, I would suggest that you post the question on the below link for assistance.

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

• Failed to connect to update server .__The error code is 12007

  I am running Windows 7 and by using the wifi internet connection.  The error occurs every time I turn on the computer and of course before I'm connected to the net.  After that I connected the error window remains active until I close it.

  * Title *.
  Update failed. The update Module intercepted a mistake. Failed to connect to update server .__The error code is 12007. The server name cannot be resolved. __

  Woodymango,
  If you are running Windows Update you get an error?  Is this an error state that it is from Windows Update or is this another program that runs a program of automatic update?

  Perform a clean boot and see if the error returns.  Post back with the results and INFO.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Server connection error

  Series of photosmart HP 7520. -J' am trying to scan a document to send and keep getting the message "server connection error" despite the fact that WiFi is showing as connected. I'm not very good with technology! Can anyone help please?

  Hello Alleycat1. I understand that you have a problem scanning to e-mail, about the connection to the server. If you follow the troubleshooting in this HP document, the issue should be resolved, as it contains troubleshooting for this error message: http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?sp4ts.oid=4022328&spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c02524629-11%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  If these steps do not resolve the problem, I would like that you follow these troubleshooting steps (assuming you're the App on the front panel of the printer):

  1 Select the Web Services on the Panel forward, then settings.
  2. Select "delete web services" and wait as the services to be eliminated.
  3. Once finished, you will return to the home page.
  4. Select the Web Services icon on the printer and go through the steps of installing Web Services once more.
  5. you will receive a more recent code. Later, you can use this code to add the printer to your account eprintcenter.com hpconnected.com / using this code.

  6. you can, or that you may create another email address.

  7. try a different scanning to e-mail using the app.

  Please notify me when all troubleshooting is done, and I'll continue to help you if necessary.

  Mario