Como could bloquear the position of UN elemento in page para from ese punto is not to moviera?

Similar Questions

• The position of everything through a Page

  I have a book composed of about 15 cases of chapter. Because of technical changes beyond my control, I need to change the margins, my is sovereign and all content of the pages left only about 1/4 "to the outside.

  What is the best way to do it?

  Making copies of backup first, just in case.

  Then, go to the Layout > setting layout... and turn on the adjustment of the layout. If text frames are currently sanpped to margin guides, you're golden, otherwise, you must make two adjustments.

  On the master page, if executives are already aligned with the guides, go to layout > margins and columns and just put zero margins. Executives will move. If the images are not aligned on the guides, you must first move the margins so that they correspond to the edges of the image, and then move them where you want. Other template may need to move to the master pages and objects who engage on guides on document pages will be need to deal individually, but the layout setting, you should get most of the way.

• Since the last upgrade box, 'Find in page' opens in a tab - still not open at the bottom of the screen. How can I do stay open all the time?

  Used to be when I opened find it (Control F or Menu/Edition/search) bar he would remain open at the bottom of the Firefox window in all tabs and new tabs, I opened. Now it doesn't open in the current tab; When I have tabs or open a new one, I have to open the search bar in the new tab.

  I use 'Find in page' several times a day, so it's extremely annoying. Is there a setting that I can change so that once I open the search bar remains open for the whole browser and all its tabs?

  Thank you

  Max

  It has been changed, you can change it back with this addon.

  • https://addons.Mozilla.org/firefox/addon/findbar-tweak

• When I click on the shortcut it does not open firefox but if I hold the cursor on the short cut it shows tabs from last time, but not open them

  But if I hold the cursor on the short cut, that it shows the last tab and how many pages come from my last visit, but will not open them no matter how many times I click it

  If you think that your Firefox window can be "off-screen" somewhere, what happens sometimes to certain users, this discussion has a few things to heal that: when I go to open firefox it appears on my toolbar, but not on my screen where it is?

• Is there a way to define a text variable to pick up the last instance on a previous page?

  Hello

  I have a text variable to pick up at once in a document (which is defined with a character style). It's sort of schedule with multiple entries per hour.

  It works very well, however, its pages and pages of text, some of them wearing top of the previous page. For example, a page can start with 08:00 and the header is defined at 08:00, that works. 08:00 until almost the end of the next page, but 3 lines from the bottom is 09:00 in this case, I would still like this page to say at 08:00 and I would like to the next page to tell even if the first instance of the style of time on this page is from 10:00 to 09:00

  Any ideas if this is possible?

  Thank you! Much appreciated!

  Probably not without adding a non-printable tag at 08:00 in the page. ID running header variables are defined to use the page in progress, or look back only if there is no instance on the current page.

• Why I am invited to a certificate at the launch of VMWare Server home page?

  Why I am invited to a certificate at the launch of VMWare Server home page?  I know it's not everyone.  Many of my colleagues use VMWare server, and it is not prompted to select a certificate.

  You are prompted because the server uses the SSL certificate by default demo. The demo cert is issued by VMWare, this transmitter is not approved by your browser if you receive the certificate error message when you try to access the page.

  If you use Firefox, you can add the certificate as an exception by selecting the drop down menu "I understand the risks", "Add Exception".

  If you use IE you can continue to the Web site, and then select the "certificate error" warning message in the address bar (assuming that you have IE 7/8) and by adding the exception it (view certificate > install the certificate).

  Beyond the options above to add the certification to your browsers trust certificate store, you can download a new web SSL certificate on your server issued by a common approved issuer (i.e. VeriSign, or your own approved Cert authority internal).

• My Mozilla Firefox is a little buggy! What could be the reason?

  My Mozilla Firefox behaves weird lately. I don't know how to explain this while I posted a picture below. This product only when I opened two or more TABS. When a tab is open, everything seems fine. But when I open another tab, I can see small squares that change their position and show especially in the navigation toolbar, but sometimes also in the browser (as in this case).

  I have no idea what this could be. I tried to update my Firefox, that completely uninstall and install everything from scratch. Nothing has changed.

  It does not appear in Internet Explorer 11 or in latest Chrome but only in Firefox.

  I guess that's maybe another program which is associated with Firefox, but I can't find the solution.

  If anyone has had a similar experience, please let me know how you solved it.

  PS hope you can see in this photo the little squares. I scored the with the Red arrows.

  I already tried to solve this problem and asked for help via Stack Overflow, but impossible to find the solution. Here is a link to my question here: http://stackoverflow.com/questions/29448005/my-mozilla-firefox-is-kinda-buggy-what-could-be-the-reason

  I really hope someone can help me solve this problem. I love Firefox and do not want to use other browsers, but these bugs are so boring! Help, please.

  Time to do some basic troubleshooting to locate your customizations (or combination of mods) which is causing that.

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• Where can I find the tutorial or sample Vi to control the position and speed of the stepper motor?

  Hi all

  I use a driver on 3rd for a stepper motor and I use USB6356 as the controller to drive the motor. Could you recommend some VI sample or tutorial on the position and the speed control of stepper motor?

  Thank you

  The best

  I think that what you are looking for is the LabVIEW SoftMotion Module:

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/14234

  Here is a good resource on stepper motor theory:

  http://www.haydonkerk.com/resources/StepperMotorTheory/tabid/192/default.aspx

  My recommendation would be to start from a counterexample of LabVIEW. These can be found in LabVIEW > help > examples > material input and output > DAQmx > input meter, output meter.

• FPGA acquires only the positive part of the signal

  Hi all

  I have the NI USB-7855R and using the personality of DAQ balanced example of e/s (http://www.ni.com/example/5961/en/). I plugged my generator Agilent to AI0 (in mode CSR) and I have the following problems:

  (1) waveform graph in LabVIEW is only to show the positive part of the sine wave that I am providing to the Board of Directors (clipping at 0 V). Only by compensating the signal from the signal generator, I am able to get the two cycles.

  (2) while I am out 5 Vpp on the generator of signals on the graph of a waveform in LabVIEW I see only 1.5 mVp.

  Any suggestions on what could be the problem?

  Thanks in advance or your help!

  The first graph of "analog input" in your link shows the analog inputs are converted to unsigned integers (U32) before their passage in the FPGA-> host FIFO. Negative values will obviously be lost make this conversion.

• back of the motor to the position in which he started?

  Hello

  I am writing an application to control a servo AC motor. It is based on reviews of couple. I use a state machine architecture. The result I'm aiming is,

  (1) the engine operating at a user specified speed and accel/break.

  (2) every time that the couple toggles between the upper and lower, limits the motor direction of rotation is changed.

  (3) at the end (the user specifies no. sometimes he should make this bike) the engine returns to the first zero position in which he started.

  (4) generates the data to the file and stops execution of the program.

  (1) and (2) have been supported. However, I'm still struggling with (3) and (4).

  What I have tried is to take note of the position of the encoder at the beginning of the program, and then after n cycles subtract aware of the position of him and give it as an input in State "Reset postion. Another thing I thought is playing with the tension (the departure of couple cell output voltage is always + 5V) so I thought to call the State "Motor Run" again at the end to move the engine to the original position. I tried some trial and error but am fultile in the efforts.

  No matter who may be likely to help the hand?

  Thank you

  Amandine.

  Hi Sasi,

  in case you have not found your bug by yourself, yet:

  After your state machine has entered the State of the 'RESET' POSITION you start a movement on the 0 position but you should not expect that the move is completed (this should be an additional State). Instead you immediately plug in "STOP ENGINE" and it stops moving without going back to the initial position.

  In addition, there are several things in your code that could be optimized (some examples):

  • By comparing a Boolean value as your STOP button with a constant TRUE is pointless, because the output is always the value of the STOP button. It's sort of a code of Rube Goldberg.
  • Your initialization state runs the same sequence of commands (displacement engine position 0) until button is pressed. There is a large number of redundant orders, sent to the Commission of control of movement.

  Kind regards

  Jochen

• Remember the positions of the windows

  Good if I'll really go back in time, I think remember me on 3 window... something that you could say it remember the window position, so he opened in the same place every time.

  I use a wide screen and open several applications at the same time.

  Is it possible to 'say' an app to open at a certain position on the screen. That is to say that I love my calculator to be always down, but it opens up on the left.

  See you soon

  Hello PaulGibbs,

  Thank you for visiting the Microsoft answers community.

  This happens with all of your applications, or just calculator?

  Windows stores the location where you close your application and opens the next time in this place. However, there are third party software that may interfere with this process.

  Try to perform a clean boot:

  Step 1: Perform a clean boot

   

  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  ·          Log the computer by using an account with administrator rights.

  ·          Click Start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  ·          On the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  ·          Under the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  ·          Click OK and then click on restart.

  Step 2: Enable half the services

  ·          Follow steps 1a and 1B to start the System Configuration utility.

  ·          Click the Services tab, and then click to select the skin all the Microsoft services checkbox.

  ·          Click to select half of the check boxes in the Service list.

  ·          Click OK and then click on restart.

  Step 3: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 2. In step 2, click to clear half of the check boxes that you have initially enabled in the Service list.

  If the problem does not occur, repeat steps 1 and 2. In step 2, select only half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.

  If only one service is selected in the list of services, and you the problem persists, the service selected the cause of the problem. Go to step 6. If no service is causing this problem, go to step 4.

  Step 4: Enable half of the startup items

  Perform a clean boot by repeating step 1.

  Click the Startup tab, and then click to select half of the check boxes in the startup item list.

  Click OK and then click on restart.

  Step 5: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 4. In step 4, click to clear half of the check boxes that you have originally selected in the startup item list.

  If the problem does not occur, repeat steps 1 and 4. In step 4, select only half of the remaining check boxes that are cleared in the startup item list. Repeat these steps until you have selected all the check boxes.

  If only one startup item is selected in the startup item list, and you still experience the problem, start selected in the list element is the service that is causing the problem. Go to step 6.

  If no startup item causes this problem, a Microsoft service most likely the cause of the problem. To determine which Microsoft service may be causing the problem, repeat step 1 and step 2 without selecting the hide all Microsoft services check box in each step.

  Step 6: Resolve the problem

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Step 7: Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to restart restart the computer to start as usual:

  ·          Click Start, type msconfig.exe in the start search box and press ENTER. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  ·          On the general tab, click the Normal startup option, and then click OK.

  ·          When you are prompted to restart the computer, click Restart.Collapse this includes this image

  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to move from the position of the START button on the screen of my Windows vista?

  I wonder why the START button of my windows vista changes its position on the screen of my laptop. I tried to search the solution by right-clicking the windows logo ang then go to properties and proceed to the taskbar button. From there I could not fined option on how to change the position of my taskbar, usually on the lower part of the horizontal of the monitor. Now, he has moved from the left upright. I need to restore the parameters passed. Please help me.

  Hello

  read this:

  http://Windows.Microsoft.com/en-us/Windows-Vista/unlock-and-move-the-taskbar

  Unlock and move the taskbar

  Once you unlock the taskbar, it is ready to move to any horizontal or vertical office edge.

  Taskbar

  View all

  To unlock the taskbar

  • Right click on a space empty in the taskbar. If a checkmark beside him doesn't lock the taskbar, the taskbar is locked. You can unlock it by clicking on lock the taskbar, which removes the check mark.

    

    Note

    To lock the taskbar into place, right-click an empty space in the task bar, then click on lock the taskbar, so that the box is displayed.

  To move the taskbar

  • Click on an empty space on the taskbar, and then hold down the mouse button, dragging the taskbar to one of the four sides of the office. Once the taskbar where you want, release the mouse button.

• How to make a text field to accept a capital letter has or a number in the position of the first character and only the numbers after that?

  Hi all

  We have a text field in one of our screen in our mobile app. Currently the user can enter alpha numeric characters in this text field.

  It is now that this field should accept a capital letter A or a number in the position of the first character and only the numbers after that.

  Could someone let us know how to do this?

  Thank you.

  Or, how about the substitution of this abstract method in textFilter?

  public boolean validate(character char,
                          AbstractString text
  int position)

• How to change the position of the BB Menu?

  Hi all
  I would like to know how to change the position of the BB Menu. We made a personalized menu of BB and it appears in the upper right of the screen. I would like to know if it is possible to display the menu in the lower left side. We have checked RIM API, but did not find anything for this. Is there a way to do this? We could use other libraries or specific solution as it is very important for our project.

  Thank you

  Pedro

  It is not possible with the menus built-in mechanism.

  You can provide your own menu, using popupscreen and objectlistfield, for example. You can place this popup where you want.

• Dragging with the recording of the position of the keyframes

  Is it possible? For example, I want to change the end of the layer

  

  But when I change the end of this layer ([Alt +]), these keyframes at the end of the layer, they are not the same position

  

  I want to record the position of the keyframes by dragging the layer

  English isn't my mother tongue. Your seem to be good for me. The article tells you how to create automatic dissolves by in and out, I sent points thanks to a preset that does not exist in Ae for free.

  another tool, I can think of is this script: Obsessive 2 layers - aescripts + aeplugins - aescripts.com , this allows to cut layers to keyframes.

  Personally, I would not bother and just do the steps. 1.trim / extend layer 2. Drag the keyframes using the SHIFT key to snap. You can also use the O shortcut to go to point and this could be handy if you can't break, because the other software snap-in components get in the way.

  I think that's all that I've got ACE. Perhaps others may offer other ideas. If you have an idea for a feature that will make better Ae you can submit it here:feature request/Bug Report Form