"Can not detect 2 HDD on the system" error starting hp Pavilion G7 11002sa

Similar Questions

• can not backup files to restore the system to receive error code 0 x 80070005

  Original title: can not save the files in system restore

  > error message... a shadow copy could not be created (0x80070005).

  Hello

  Disable the security software and activation of Volume Shadow Copy and backup service can help in performing a backup.

  Check the steps suggested by Sandeep GNT from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/Vista-Home-backup-0x80070005/4558119a-73d6-4C18-9a95-8ae484678586

  Good day!

  Answer please if you face concerns.

• Satellite A200-236 - can not get optimal resolution of the system

  Hello readers,

  I just installed the new ati drivers on my laptop and I can't get the optimal resolution of the system. I installed the old toshiba drivers, but I still have problems with the resolution. Anyone know how I can get the optimal resolution of the system to 1200 x 800?

  Mike Brust

  On what resolution the laptop switches mode?

  Before installing the new drivers, you must remove the old driver, restart your computer and install the new drivers.

  Also, make sure that you have installed all Service Packs and patches for your operating system.

  In addition, you must use the graphics drivers from Toshiba. Other graphics drivers don t have a protection against overheating and in the worst case, the graphics card can overheat and be damaged.
  With the Toshiba drivers, you are always on the safe side.

• can not do a recovery of the system due to accidents without end

  High guy

  I was doing a system recovery plant for almost 2 hours. I have completed the formatting and reinstallation of recovery disks 1, 2, 3 and deleted records. The system continued to install packaged software and was nearly 95% through when it suddenly crashed. It gave the error: Setup could not be completed and had to be restarted.

  So I tried 8 times and each time I get:

  Recovery is complete

  Click Finish to start your computer

  But then the dreaded BSOD happens every time

  and I have to repeat the process again and again.

  Any help

  Product: FV713EA #ABV

  [email protected]
  4 Gega
  320
  GeForce 9600

  Melanchete thank you once again,

  The good news, I'm ' write this response of the machine finally after he finally decided to complete the recovery of the system.

  I think what I did this time different first disk failure.

  I got a reply: cannot verify disk because it is in use. I would like to end use and force the audit.

  I answered there. The audit found no errors.

  Complete the check I went to recovery and this was done with no crash during the 12th attempt.

  Thanks again and I will certainly look into the extensible Vista option.

• Impossible to determine return PID of launch AND can not run app due to the 8 error

  Hello

  I'm new on NDK BB as well as waterfalls and the C. M AI cannot run a sample application of cascade on BB Dev Alpha Simulator.

  When I try to run the app I get pop 'impossible to determine PID returned to launch '.
  The icon of the application on the Simulator, but when I click on the icon to launch the application, I get the pop up 'Impossible to launch my App name in the error 8'

  Please, can someone guide me what mssing 'em here.

  Concerning

  Hello

  I don't know how but my problem is now solved, today I just started the system. Clean, build and run the application and the error is no longer there (I tried several times yesterday, do not know why he has not worked at the time)

  @borceg build configuration is set to Simulator-debug

  Thank you all for your help.

  Concerning

• Fix, it tells me that I need SP3 in XP it can apply the fix. You can download it from windows update. It's my problem, I can not download anything without having the 0x8024400A error

  I have problems to windows and Microsoft Update sites. I can't download updates without them having stopped by the 0x8024400A error message. I turned to microsoft Fix it automated repair and told me to go to the updates and download service pack 3 and Fix then it could solve my problem. Because I have the right software on my windows XP computer. You see that it is one of the updates, I need for my version of XP. I don't know what to do. There, can someone help me.   Bogacki signed

  Download the full install Service Pack 3 from this link:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Ignore the warnings on the download, it's what you want.

• Q10 blackBerry I can not install any apps, showed the installation error

  Hi, I don't know what happened, but suddenly I couldn't install all the apps to the blackberry world. He is shown utf8 codec can't decode byte 0xe5. Can you help me to solve? Thank you!

  I would start with a security wipe then:

  To perform a security Wipe please follow the instructions below. Be sure and use the BB link to perform a backup before proceeding with the full wipe:

  http://www.BlackBerry.com/BTSC/KB33591

  Once the wipe is complete, you can restore your backup. Remember that the data in the backup can be the source of the original problem and restore can restore the problem, as well. To compensate for this, I do not recommend restoring the passage of the backup settings.

• Hello, the following problem, I use a PC, can not use Photoshop, you get the text following error message on the computer-Adobe Photoshop CC 2015 has stopped working "close the program". have uninstalled and installed a number of times, but the CC2015 wil

  Hello, the following problem, I use a PC, can not use Photoshop, you get the following error message on the computer-Adobe Photoshop CC 2015 has stopped working " ", "the program '. '. have uninstalled et installed a number sometimes but the CC2015 does not start anyway. Soren

  Please see:

  Re: adobe photoshop cc 2014 has stopped working in windows 8

  Re: Photoshop CC 2015 has stopped working

  https://www.YouTube.com/watch?v=0OUdIZT7C2E

  I hope this helps.

  Concerning

  Megha Rawat

• Audio input Inspiron 15 3000 can not detect the headset

  Audio input Inspiron 15 3000 can not detect the headset, but audio dell can detect something trendy. However, the playback sound device cannot detect any helmet. Now I only get gurgling in the helmet. How to solve this problem?

  Hello. To test the headphone switch the native Windows audio driver Realtek audio driver.

  1. open Device Manager (type devmgmt.msc in the box of Windows search).
  2. develop the 'audio controllers, video & game' and right click on "Realtek High Definition Audio".
  3 Select this option to "Update driver software".
  4. click on "Browse my computer for driver software".
  5. click on "Let Me pick from a list of drivers on my computer".
  6. put the "Show compatible hardware" check box if not already checked.
  7. in the list of devices, click on 'High Definition Audio"(native driver).
  8. click on "next".
  9. in the update driver warning box, click 'Yes' (the driver).
  10 restart the portable computer if you are prompted. If not invited, so no need to restart.
  [To return to the Realtek driver, do it again but reverse the names in steps 1-6.]

  If it is still bubbling even with the native driver, test by using other headphones. If still no luck then probably hardware failure. Contact technical support for warranty repair.

  If it works fine with the native driver, then the Realtek driver is buggy. Try a different version of the driver. If you need help with this answer comes back with the full model name (something like "Inspiron 11 3147", etc.) and which operating system there.

• RECOVERY CD CAN NOT DETECT THE HARD DRIVE

  Hello!

  I HAVE HP PAVILION xt412 NOTEBOOK. AFTER THAT IT CRASHED, I TRIED TO RECOVER MY LAPTOP USING THE RECOVERY CD.

  AFTER A WHILE A MESSAGE COME TO SAY "SETUP COULD NOT DETECT ANY HDD, PUT IN PLACE WILL LEAVE."

  BEFORE THE CRASH IT WAS WORKING VERY WELL, NOW I DON'T KNOW WHAT TO DO. I'D APPRECIATE ANY HELP.

  Thank you.

  Looks like your hard drive failure caused the accident. You need to replace it and then start with recovery disks to install hard drive again.

• Boot Camp can not detect Windows software support

  Hi guys!

  1. I have a question, I started my bootcamp and pressed the 2 first options and clicked on continue:

  http://postimg.org/image/9mly0tvjl/

  2. that's what I did to "2." step. I chose the iso file of Windows 7 Home Premium and boot camp agreed and loading all fine!

  http://postimg.org/image/tg97p5fu5/

  3 and now it was time for step 3:

  http://postimg.org/image/554gf7i3x/

  After Boot camp let me decide how many GB, I want to save for Windows... I got 500GB (half) and clicking 'Install'... but the problem is here...

  It is said that: "Boot Camp can not detect Windows supports software.." and so on.

  Where do you think the problem is? Is - this problem on the ISO file?

  I would appreciate any kind of help,

  Thank you.

  What year/model is your Mac? Please see step 11 in install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support .

• Pavilion dv2500: can not detect our connection to wifi PLDTHOMEFIBR (our own connection)

  Hello community of Hp.
  
  I have a problem with my PORTABLE HP PAVILION dv2500 PC.
  
  A few months ago, everything is ok.
  
  It can detect our wifi.
  
  then yesterday I just know that it can not detect our wifi at home.
  
  I mean that my laptop can detect our neighbors wifi. but it can not detect our own wifi.

  I already perform some troubleshooting method.

  the first thing I did.
  
  is that I perform a RESET of my modem.
  
  because I think that the IP of my laptop has been block by my modem.
  
  If, after that, it's the same. It can not detect our wifi.

  second is.
  
  I reformat WINDOWS Vista x 64.
  
  but it's the same thing.
  
  It can only detect our neighbors wifi. but our is not.

  last thing I did was to change the ip address of my laptop.
  
  but it did not solve my problem either.

  pls help me solve this problem.
  
  
  
  Thank you.
  
  and God bless you all.
  
  more power for the team of hp with this site.
  
  
  
  Please send me an email or comment here if you have an idea on how to solve my problem.
  
  [Personal information]
  
  Thanks again and best regards.

  Hi @BooJimBoo,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!
  
  I stumbled upon your post on the HP laptop and wanted to help you! I looked in your question about your Hp Pavilion dv2500 Notebook and problems with the wireless connection. Try to reset the router. Wait 30 seconds before plugging and unplugging the router to make sure, it resets completely. Here is a link for troubleshooting wireless connection, if you need. Section I fell better help is the key to security is changed 3. To establish a new connection to the wireless network, return to the network sharing Center window, select set up a connection to a network.

  If the problem persists, I would change the channel on the router. Routers are able to communicate to your laptop on several different channels. You can contact your Internet provider.

  Some say that this download will help fix this Microsoft Fix it.
  
  Here is a linkto help as well.
  
  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .
  
  Thank you.

• Vista will not start after update 12/9 - a patch prevents the system from starting.

  My computer has downloaded an automatic update on 09/12/09.  It restarted while I was at work, and when I got home he had just ran a startup repair function which could not solve the problem.  I tried to run the rapair again and it failed.  I tried to do a system restore on the eve of the update, but the operating system could not start again, and I was sent automatically the Startup Repair tool.

  When I look at the diagnostics, the message says "a patch prevents the system from starting.  I have no idea how to solve this problem.  Can someone please?

  PCrepair101,
  You try to use the package manager I link a few post above?  Otherwise, demarrer start from your DVD, type command prompt, and then follow the steps in method 2.  http://support.Microsoft.com/kb/940410
  If this does not fix it you can rename the pending.xml file and restart.  To do this, boot from the DVD and enter the command line.  Then type:
  CD windows\winsxs - press on enter
  Ren pending.xml pending.old - press on enter

  Then restart the system.

  You said "when I try to do a system restore, it is said that there is no previous restore point" and I was wondering if you have tried a "Startup Repair" not a system restore.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer can not detect any sound cards and graphics or communication ports.

  Recently I reinstalled Windows using the CD, I had Dell, when I bought my computer. However, when I was done with the installation, I went on youtube to look at things and I realized that the sound was not working. I thought I must have forgotten to install the driver for my sound card, then when I tried to install, it says something in the sense of "error". - Impossible to find Port Com1 I looked into this a bit on google and found that it is probably disabled in my BiOS. I'm not sure what to do after that, but I hope that someone knows why my computer can not detect anything.  hate viruses

  http://support.Dell.com/support/downloads/index.aspx

  Go to Dell website > drivers and downloads Section > key in your model number > get latest XP drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• can not detect my optical drive

  Hello comrades,.

  Seems all of a sudden my laptop cannot detect my optical drive. When I try to 'My computer', it no longer displays G: (which is my optical drive), the rest of those who are still there.

  I found out about this when I pressed the EJECT button on my laptop because I wanted to put a DVD in to play. The car tried to RUN, I see the light is on, but after 30 seconds or so, the stopping of the car. and he can't play

  Indeed, it appears a sayings of notification:

  "cannot open trayof the optical drive, pleast try again to eject the drawer after closing all by using the software or shut down the system & then start the windows." If none of the above option works, insert a thin object / straight as paperclips into the hole of the manual on the SIDE of the disc.

  Well, I can press the SIDE button and open the drive to take out the DVD drive.

  Can someone tell me HOW to fix? I have ALREADY run the Malwarebytes and SuperAntiVirus scan in SafeMode two full sweep.

  Here are the specifications of my laptop:

  32 bit Vista Ultimate / 4 GB RAM / about 300 GB HARD drive

  MANY TAHNKS!

  1] you will find under Device Manager?
  is [2] detected in the BIOS?
  [3] make sure that the data cable is well fixed.

  Run the following application Fix - it: -.
  http://support.Microsoft.com/kb/314060