Compaq nx6110: can I get WPA WiFi driver for Compaq nx6110?
I have a HP (Compaq) nx6110 and I have a problem with a Wi - Fi connection since the change of provider of broadband services.
It seems that from the new provider router uses WPA, so that the previous router used WEP Protocol.
Is it possible to update the drivers to accept the WPA?
On the basis of the laptop sticker indicates: Broadcom BCM94306MPLNA radio model
Hello:
You have to have XP SP3 installed so that WPA will be supported, or you need to install this patch for SP2.
http://www.Microsoft.com/en-US/Download/details.aspx?ID=1974
You can also use this driver for the broadcom wireless card, your PC has since it's probably newer than the one on your laptop support page...
Tags: Notebooks
Similar Questions
-
How can I get a boot drive for windows vista
How can I get a boot drive for windows vista
Hello
Here's how to do a startup, vista etc disc repair
It is NOT a reinstall drive
the link below is how to download and get a vista disk startup repair, which you can start from the
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below
http://www.bleepingcomputer.com/tutorials/tutorial148.html
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/
How to reinstall Vista
Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer
Ask them of the exact key sequence
or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
http://www.theeldergeek.com/Vista/vista_clean_installation.html
How to replace Microsoft software or hardware, order service packs and replace product manuals
-
where can I get the printer driver for canon lbp2900 printer. I'm running Windows 7 on a HP Pavilion PC. Windows Update does not list a driver for LBP2900 printr
A quick google found this - http://software.canon-europe.com/products/0010177.asp perhaps?
I have not tried, I don't have the printer.
Its usually best to ask the manufacturer of the device for its pilots in the first instance.
-
How can I get a twain driver for CS5 for Windows 7?
How can I get a twain driver for CS5 for Windows 7?
Since you have photoshop cs5 in the x 86 program files, then you have the 32 and 64 bit versions of photoshop cs5 installed.
the 64-bit version of photoshop cs5 is in
C:\Program Files\Adobe\Adobe Photoshop CS5 (64 bit)
and the 32-bit version is in
C:\Program Files (x 86) \Adobe\Adobe Photoshop CS5
If you have not changed anything in the menu programs, while two versions of photoshop cs5 should be included under Start > all programs
Photoshop CS5 is the 32-bit version
Photoshop CS5 (64 bit) is the 64-bit version
You put the Twain plugin in Win32 folder from the link listed in the #1 message in the Photoshop CS5 32 bit Plug-Ins > import file
C:\Program Files (x 86) \Adobe\Adobe Photoshop CS5\Plug-ins\Import-Export
TWAIN plug-ins | Photoshop CS4, CS5, CS6
VueScan that mentions Ronald Keller is also a good option if you do not want to be restricted to the use of the 32-bit version of photoshop cs5 to scan in photoshop.
Scanner VueScan for Windows, Mac OS X and Linux software
Photoshop cs5 should also be able to use WIA support for your scanner.
It would be under the file > importantmenu t in photoshop cs5 after you have your scanner is connected and turned on
-
Portege 7200: Where can I get the display driver for Win2000?
Under display/properties, the type of adapter shows VGA adapter and the max resolution I can get is 800 x 600, which do not use the max screen size. What is the graphics card in the Portege 7200 and where can I get the display drivers for Windows 2000?
ConcerningGo to the support home page > download > in the drop down menus select laptop and your model > display driver
-
How can I get Windows 7 driver for Brother MFC-9800?
Windows 7 has stopped recognizing my Brother MFC-9800 as a scanner. How to get Windows 7 driver for Brother MFC-9800?
Have you tried brother?
-
Printer: Where can I get the latest driver for my printer
Hey everybody,
Just got a new PC and I need the latest version of the software for my printer printer, where can I get that?
Thank you
Bill
Hello
If you have an HP LaserJet printer, go to http://www.123.hp.com/Laserjet and download your software.
For most other printers HP, go to http://123.hp.com and enter the name of your printer. For example: "HP Deskjet 3752" or "HP OfficeJet Pro 8720".
* Do not look on the Internet for the web site of HP 123! There are many other sites not HP here try to capitalize on the name of HP. HP provides your free software... Use the links above!
If for any reason, the 123 links do not work, you can visit the HP support site and download the software:
- Go to hp.com/drivers and select your language / local if necessary.
- Enter the name of your printer in the box under enter my HP model number.
- If a page appears asking you to select your exact model of the printer, select the link for your printer.
- On the page of software results, change the operating system to match the one you need (number 1 below)... he could already be selected.
If an operating system is not listed, HP doesn't have any software available for your printer. - Select installation software label to expand the section, if it is not already expanded, and read the name of the software (number 2).
For Windows, if you want the complete package for your printer, you will want to download the software "Full Feature". For LaserJet, it will be called drivers and software "full." The complete package is much bigger in file size and takes up more resources, but she understands as a window of easy-to-use do things such as sweeping or check the ink and toner levels. - For Windows, HP provides often a base driver package (Figure 3).
The basic package is much smaller and is often available for several versions of Windows as a full package of features. With it, you use Windows to print and scan directly from the software you use, such as Word, Paint, photoshop, etc... - Click on the download button to start the download (number 4).
- Read and respond to the screens that pop up to install your software.
I hope this helps
-
How can I get the device driver for Dell all-in-one 944
I got a new PC and don't have the information to use my printer. How to get the driver from Dell for this printer info
... How to get the driver from Dell for this printer info
I have moved your post in the comments to the Windows, hardware and drivers section section, but have no idea which version of Windows that you are operating on. If your printer is compatible with the version of Windows you are using, you can download the drivers and support the Dell 944 all-in-one printer from Dell heresite software.
You mentioned that you have a new PC, so it is likely that you use one of the Windows 7 64-bit editions. If you want to check the hardware compatibility with Windows 7, you should try the Windows 7 Compatibility Center.Edit: If you try to work around a problem of incompatibility of Windows 7, there's a solution posted in the following thread,
-
Where can I get the print driver for HP Color Copier 190?
I have looked everywhere for these printer drivers and nothing is found?
Here is the link that will help you find your drivers.
http://goo.GL/Ft8bS -
Can't get my floppy drive to save a disk error: disk is not rewritable.
Original title: FLOPPY ERROR.
I can't get my floppy drive to save on a disk, I get the error message saying disc one is not rewritable. I use it for embroidery
how you're framing your question and the answer
is a little hard to follow.
is this correct: you have a machine that you insert a floppy disk in
that you set up with data on a computer.
the machine cannot write to the diskette or the computer cannot write
on the floppy?
or what?
-
Where can I get a WIFI signal booster?
Where can I get a WIFI signal booster?
Learn how to use www.google.com
-
I can't get my hard drive to recognize that I have a CD in the tray
I can't get my hard drive to recognize that I have a CD in the tray. I can only open and view those that I already copied. Why?
There are a number of possibilities here.
1. assuming you have tried several different blank CD (if you are fairly confident that the problem is not the media), it is possible that the laser "burning" the recordable CD is dead. Because this isn't the same laser that reads the CD, you can always read but not write. If this is the case, the only solution is to buy a new CD player (not expensive).
2. your CD drive (E :) shows when you click on my computer? I think it does, or you did that you can open and view copies of files, you have already copied to other CD.
3. open Device Manager (start > run > devmgmt.msc > OK)
- Expand the category of CD-ROM/DVD-ROM readers by clicking on the + sign to the left
- Y at - it a warning next to the entrance icon?
- Double-click the entry for your CD player
- That said under the "device status".
- What would you say (at the bottom) under "use of the device.
- Close the Properties window and Device Manager
4. open my computer, right-click on the icon for your CD drive and select Properties
- Is there a tab "recording"?
- If there is a 'Recording' tab, click on it. Is the box to "Enable the writing of CD on this drive" checked or unchecked? (Do not change at this stage)
I'm not very familiar with Media Center Edition. In the past, when you copy files to a CD, how did you do? You just drag files to the letter of the CD-ROM drive in Windows Explorer, or did you have to open an app? If the latter, what application you use to copy files to a CD.
-
Pavilion 15-ac027tx: I can't get the graphics driver amd
I can't get the graphics driver amd please help me to download
I tried a lot of things to download this driver in hp drivers website.but it gives 404 not found...
Please help me...
Hello @NagaNatarajan,
Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!
I understand that you are a problem downloading AMD drivers on the HP site and that he wanted to help you!
Unfortunately, the drivers you are looking for is not available at this time. Try uninstalling your current graphic drivers in Device Manager. Then click on the option to Update driver , let me know how it goes. Please consult the following resources to help you, if necessary: update a hardware driver that is not working properly
Please let me know if this information has been helpful by clicking the thumbs up below.
Have a great day!
-
How can I get my external drive be mapped to F: (as he was once) rather than g: which is what happens when I turn on now. I tried to unplug and power, reboot etc. There is no F: drive connected to the computer.
Go to start / Control Panel / administrative tools / computer management / "disk management and select external reader by clicking on it and then right-click on it and select change drive letter and paths." It should show the letter currently assigned (G I guess). Click the button change. To the right will be a drop of drive letters box. Go ahead and select F and click on OK. That should do it. If F is not available, then it is used by the system for something else. Check disk management to see if you can find it. If it is not, and is not available in the list, I'm afraid, you will not be able to change until find you what is using drive letter F and remove it, or change it to something else.
I hope this helps. If this isn't the case, after return and we will try to understand what is using F or why it is not available.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Installing Windows said "we have found no disk drives. How can I get a storage driver?
My hard drives of computers were completely destroyed by overhead sprinklers during a fire. Installing Windows said "we have found no disk drives. How can I get a storage driver? I can't go online until I have install windows. Thank you
Hello
So it does not start from the disc, but when you get to the part where it asks me to choose a disk to install Windows, you do not see something here, is that correct? Go to the menu of the Bios (tap button "F2" at startup to access the Bios), then Advanced and check what you show for the SATA/operating Mode option.
Maybe you are looking for
-
selective syncing like dropbox?
Anyway is to specify which folders within her iCloud Drive synchronize with a particular Mac? Dropbox allows this function. I would have all my folders in iCloud visible on my drive home iMac, but none of them on my iMac to work (while allowing progr
-
Export of text messages SMS for Treo 680
What options are available to export the SMS text messages and call logs from the Treo 680? I need to create hard copies for evedence in a court case. I have Palm Desktop on Mac OS X backup files. I searched through the guide of Palm, but no discuss
-
How can I install the new updates___
I have Vista 64-bit with Service Pack 2 is already installed, but am unable to install the new updates re: windows or office. One of the errors is '80070641'. I followed the instructions from Microsoft re: unable to install and read some of the forum
-
Problem with Intel graphics HD 4000 driver
Laptop HP Pavilion m6-1009tx Laptop HP Pavilion m6-1009tx Windows 7 64-bit Radeon HD 7670M Intell 4000 HD graphics card So basically all the unrest started when I tried to download the emulator android kkkkk. After I downloaded it, it prompt me to in
-
How can I get Outlook 2003 and 2007, to leave a copy of message on the server?
How can I get Outlook 2003 and 2007, to leave a copy of message on the server? I use Outlook 2003 and it keeps pulling messages out of my email account, I want at least a copy to be left there so that I can access it from anywhere and not just a comp