How can I get Windows 7 driver for Brother MFC-9800?

Similar Questions

• How can I get a boot drive for windows vista

  How can I get a boot drive for windows vista

  Hello

  Here's how to do a startup, vista etc disc repair

  It is NOT a reinstall drive

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  How to reinstall Vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How can I get a twain driver for CS5 for Windows 7?

  How can I get a twain driver for CS5 for Windows 7?

  Since you have photoshop cs5 in the x 86 program files, then you have the 32 and 64 bit versions of photoshop cs5 installed.

  the 64-bit version of photoshop cs5 is in

  C:\Program Files\Adobe\Adobe Photoshop CS5 (64 bit)

  and the 32-bit version is in

  C:\Program Files (x 86) \Adobe\Adobe Photoshop CS5

  
  

  
  

  If you have not changed anything in the menu programs, while two versions of photoshop cs5 should be included under Start > all programs

  
  

  
  

  Photoshop CS5 is the 32-bit version

  
  

  Photoshop CS5 (64 bit) is the 64-bit version

  
  

  You put the Twain plugin in Win32 folder from the link listed in the #1 message in the Photoshop CS5 32 bit Plug-Ins > import file

  C:\Program Files (x 86) \Adobe\Adobe Photoshop CS5\Plug-ins\Import-Export

  TWAIN plug-ins | Photoshop CS4, CS5, CS6

  VueScan that mentions Ronald Keller is also a good option if you do not want to be restricted to the use of the 32-bit version of photoshop cs5 to scan in photoshop.

  
  

  Scanner VueScan for Windows, Mac OS X and Linux software

  
  

  
  

  Photoshop cs5 should also be able to use WIA support for your scanner.

  It would be under the file > importantmenu t in photoshop cs5 after you have your scanner is connected and turned on
  

• How can I get windows xp updates for later use? What I have to do?

  I use Windows XP SP3 & Windows 7 Ultimate. How can I get updates so that I can install it even after reinstalling windows.

  I want this cause I have to reinstall Windows frequently.

  A much simpler and easier solution is to do a clean install and update and then create an image of your new installation, the next time you need to reinstall Windows you simply restore your image and update the image newly installed and then create an image update for the next installation.  There are many Imaging disc out there, many of them for free.  I prefer TeraByte Image for Windows (not free) for my imaging needs.

  John

• How can I get the device driver for Dell all-in-one 944

  I got a new PC and don't have the information to use my printer.  How to get the driver from Dell for this printer info

  ... How to get the driver from Dell for this printer info

  I have moved your post in the comments to the Windows, hardware and drivers section section, but have no idea which version of Windows that you are operating on. If your printer is compatible with the version of Windows you are using, you can download the drivers and support the Dell 944 all-in-one printer from Dell heresite software.
                                                 
  You mentioned that you have a new PC, so it is likely that you use one of the Windows 7 64-bit editions. If you want to check the hardware compatibility with Windows 7, you should try the Windows 7 Compatibility Center.

  Edit: If you try to work around a problem of incompatibility of Windows 7, there's a solution posted in the following thread,

  The owners of all-in-one printer Dell 944 thread (W7)

• How can I get Windows 7 drivers for HP Scanjet N8420, N8460 and N8350

  We need support in getting our scanners HP works best. We have the HP Scanjet N8350, that worked on vista until we migrated TSE window 7. the performance of the scanner has dropped since then. Also, we have Scanjet N8420 but do not have the right driver. We plan to buy N8460 and we are sceared he could not work with windows 7.

  We need to get the windows 7 drivers please.

  As requested.

  These three products Scanjet. are compatible with Windows 7

  N8420

  Drivers for Windows 7 (32 bit)

  Drivers for Windows 7 (64-bit)

  N8460

  Drivers for Windows 7 (64-bit)

  Drivers for Windows (32 bit)

  N8350

  Drivers for Windows (32 bit)

  Drivers for Windows (64-bit

• How can I get windows live mail for work online

  My windows Live Mail is showing "work offline".
  When I get the dialog box "do you want to go online? I press 'Yes', but the same dialog just come back again.

  Now I have Windows Live Mail works again. I did download an apparently new version of http://windows.microsoft.com/en-GB/windows-live/essentials-other-programs here

  I downloaded just the 'Mail' app specifically, didn't want the other stuff.

  Loading to the top it's now called "Windows Live Mail 2012" but everything looks the same, and she kept all my settings intact inboxes, etc.. Happy days.

• I replaced my hard drive. How can I get Windows XP loaded on my computer? I've already paid the fee.

  I replaced my hard drive.  How can I get Windows XP loaded on my computer?  I've already paid the fee

  Hello rsmith3042000

  What kind of system do you have?

  Do you have an XP installation CD?

  Here are installation tutorials

  http://www.theeldergeek.com/xp_pro_install_-_graphic.htm

  http://www.michaelstevenstech.com/cleanxpinstall.html

  If you had only a recovery partition, it's lost now so you might contact the manufacturer and ask for the CD recovery.

  .

• How can I get Windows 7 Pro 32 bit automatically connect to drives mapped to the startup?

  How can I get Windows 7 Pro 32 bit automatically connect to drives mapped to the startup?

  Hello

  It should connect as much as the other computers with their car are on the account users are properly configured, security passwords are defined and firewall do not block.

  If the system is only yours and there is no need of local network security, enable the guest account on all computers, give them all the permissions and there will be less to worry about connection mapped, but local drive without security.

  PS Ce preceding is based on cable connections. If the connections are wireless, it's another story.

  Due to the maturity of the wireless adapter and their support through the OS, automatic connection could not occur.

  Wireless is great, but most of us try to sneak out of it the uses it was not designed for.

  -------------------------------
  My posts reflect my understanding and experience. It does not necessarily reflect the opinion or the vision of Microsoft, or anyone else.

• Installing Windows said "we have found no disk drives. How can I get a storage driver?

  My hard drives of computers were completely destroyed by overhead sprinklers during a fire. Installing Windows said "we have found no disk drives. How can I get a storage driver? I can't go online until I have install windows. Thank you

  Hello

  So it does not start from the disc, but when you get to the part where it asks me to choose a disk to install Windows, you do not see something here, is that correct? Go to the menu of the Bios (tap button "F2" at startup to access the Bios), then Advanced and check what you show for the SATA/operating Mode option.

• How can I get Windows 7 to recognize my NAS drive as a file server?

  I just bought a new desktop computer with Windows 7 (the first time I used it at home).  I have three drives NAS; one of them is an of Maxtor Central axis.  I use the Central axis as a file server, it has Word, Excel and other Office files in addition to my music library and a handful of videos.  Whenever I try to open a document, say Word, Windows 7 does not show the Maxtor under my network.  It shows one of the other drives NAS (Iomega).  When I right click on the network, click "Open in a new window", I see the Maxtor drive. However when I click on it, Windows will open Windows Media Player.  I see only three songs, which aren't even mine; I think they were samples placed on the disk by an application.

  Other machines on my network (a computer laptop PC and Mac) continue to be able to see the of Maxtor Central axis.

  I can open my documents giving the fully qualified network path "\\Mca-054e16\Public", but it's a pain.  I can't map a drive letter for the drive; I just get the small circle who constantly.

  How can I get Windows 7 see Maxtor Central Axis like a file server and not only a media server?

  Thanks in advance for any help that anyone may be able to provide,

  Nolan

  Hello

  ·        How do you set up the network?

  ·        Have you used a Maxtor software?

  The Seagate knowledge base indicates that his NASwas released before the release of Windows 7. Therefore, it has not been tested in this environment and is not supported by Technical Support. http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=211931&NewLang=en&HiLite=Maxtor+central+axis+Windows7#note

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How can I get the shutter count for my Canon 7 d Mark II using Windows XP?

  How can I get the shutter count for my Canon 7 d Mark II using Windows XP? I have been looking for many places and make downloads of files, but I can't seem to find anything. I am wary of downloading software that I know nothing. Any help is greatly appreciated.

  Hi, I paid only $2.99 acquired program namely the supreme court on a 7 d Mark 2

  Search: direstudio.com to find out.

• How can I get Windows 7 to read RAW hard drives without having to format the hard drive due to important work on this subject?

  Original title: the file format of external hard drive is the RAW and not NTFS. How can I get Windows 7 to read RAW hard drives without having to format the hard drive due to important work on this subject?

  I put the hard drive on an XP and Vista machine and can read the hard drive, but not with Windows 7

  Hi Zling,

  It works on other OS? When did you finally read the disc and with what OS? If you can read the drive and make a backup of the data on this subject, I you suggest to backup the data on the drive and then put it in using the NTFS file system.

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• where can I get the printer driver for canon lbp2900 printer. I'm running Windows 7 on a HP Pavilion PC

  where can I get the printer driver for canon lbp2900 printer.  I'm running Windows 7 on a HP Pavilion PC.  Windows Update does not list a driver for LBP2900 printr

  A quick google found this - http://software.canon-europe.com/products/0010177.asp perhaps?

  I have not tried, I don't have the printer.

  Its usually best to ask the manufacturer of the device for its pilots in the first instance.

• How can I get windows xp to recognize a new disk of 1 TB sata hard?

  How can I get windows xp to recognize a new disk of 1 TB sata hard?

  Hello NavarroIT,

  In addition to the previous comments, I have link for HD is not recognized.  It is an external drive.  However, without knowing the manufacturer of your hard drive, you will need to check on this end.  You may need to format the disk first.  I hope this helps.

  Microsoft Answers: External hard drive

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-hardware/external-hard-drive-is-not-recognized-in-my/8464edf9-d8b4-4afb-bd91-13d639c23c9c