Comparison of simple table does not. Help, please!

Similar Questions

• width of 100% does not, help please?

  

  I hope that this picture will help to show the problem I have, I will paste the code I up this just in case it is not readable in the picture also.

  I'm working in Dreamweaver CM³ (updates) on a 64-bit Windows 7 platform.  I built a dozen web sites in dreamweaver, so I'm not an expert, but I'm not either totally distraught.  I did what I'm trying to do on other sites, I'm completely stumped on what I'm doing wrong here.  Any help is appreciated!

  So, it's the intro!  Here's what I'm trying to do:

  I want three background divs that are stacked on each other, with three of them covering 100% of the screen, regardless of the size of the screen (have not implemented for media queries yet go smaller, right now just trying to put it so circles fill all the screen sizes)

  If the top bar is the Tan, then the central bar is dark brown, and the lower bar is yellowish.  At the beginning I did not apply any width of 'body', but I tried to set it to 100% as well.  Each of the three background divs have been added then, and all three were set at 100%, with an image in the background (for texture and color) set to repeat everywhere.

  No matter what I try, the three bars appear to have a limit of about 740 pixels width.  It is not a setting I've ever created, and I started the page as an html page empty - not any model.  I can't find which requires this setting width on these items.

  Here's the weird thing... it really works on a big screen - the bars go all the way through... it's on small screens (my test of fifteen inches, my iphone, the ipad screen monitor) that the background is not going anywhere!

  The image in the header (all images are just an image) is 1280 pixels.

  I'm sure someone will point me to something that makes me slap my forehead in total embarrassment, but I would gladly take the humiliation of being able to move forward on this project!  Help?

  Thank you

  Michelle

  I did something like this for a client project (view source to see the code):

  http://ALT-Web.com/test/LHS-test.html

  Nancy O.
  

• Wireless does not HELP Please

  Just today my wireless worked perfectly no problems at all. And then I'll be back from College 4 hours later and it seems not to work more, I called cisco and they want to charge me to fix it, and I don't have the money for it. I tried reseting the router (by pressing the small button with a paperclip for 30 seconds). And I also unplugged and plugged back in and still nothing. I called my internet provider and my modem works fine (im actually writing this with my laptop plugged directly on the Ethernet modem).  Could you guys help out me? exams are coming and I can't continue to take turns using the internet with other people in my house, and I can't continue to go to the library to study and do homework. Thank you, you have no idea how grateful ill be if this is resolved btw, I have a cisco linksys E2500 series wireless router

  If you have an extra ethernet cable, you can reconfigure the router manually. For step by step instructions you can check homesupport.cisco.com. You can also download this Web site configuration wizard.

• my audio does not work please help

  my audio does not work please help. Thank you!

  Hi no thanks,

  1. What is the brand and model of your system and sound card?

  2. when the problem started?

  3. did you of recent changes to the computer?

  You can try to run the sound troubleshooter and see if it helps.

  No sound in Windows

  For more information, you can also consult the following article:

  Tips for solving common audio problems

  Hope this information is useful.

• Hi my audio - pc does not work please help me

  Hi my audio - pc does not work please help me

  Uninstall the driver, reboot the system. The attempt to install the same driver for Windows Vista using Windows troubleshooting. Make a right click on the file executable/installer driver-> properties and select the Compatibility tab. Click on the box to check run this program in compatibility mode for option and select Windows Vista from the drop-down list. then try to install the device driver using run as administrator.

  Resources:

  If your computer has problems play a sound, try using the Audio playback problems resolution to solve the problem. For measures and additional information, see o ink below.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-troubleshooterOpen

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=hardware

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  In Windows 7

  Click Start > Control Panel

  Click on hardware and sound

  Under sound, click on manage audio devices

  Under playback (tab)

  Choose speakers you have in your output device

  Click Properties >

  Click levels (tab)

  check if the value is 100% >

  GoTo Enhancments > select Loudness balancing

  Apply and OK

  Should be much stronger now...

  For enhancment bit,.

  and if you have HD realtek soundmanager (R2.37) in your control panel

  Try a classic Equalizer setting

• Computer HP laptop window vista does not load please help

  someone asked this question and I have the same problem!

  I have a laptop HP who have dirtied pre-installed Vista and for some reason after installing automatically 3 updates the other day, he is not now charge up. The laptop is plugged in so it can configure 3 updates without failure (due to something like battery dying).

  When the laptop turns on, it gives me two options:
  • Start the reboot system (recommended)
  • Start Windows normally

  If I click on 'Launch Startup Repair', he comes back to do the same screen with them two options and when I click on "Start Windows normally", the laptop everything restarts and then return to this screen.

  Thus, F8-ing it does not help either - it gives me options like computer repair, Mode safe mode, last known good, etc... but none of these helped either.

  I looked around online for a solution, but most say on the use of the Vista installation CD, but the operating system is installed on a partition on the laptop (also there are files on what I would come down)... However I do not know if I can get it to boot on the installation partition either

  I tried F8, F11, F12 and nothing works

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  See you soon.

  Mick Murphy - Microsoft partner

• I have a laptop hp envy dv7 - 3723cl, the simple pass does not work

  My simple pass does not work. I have check the biometric device, the software is up-to-date, and it gives me an error code 19.

  On my installed programs I do not see the simple pass program is no longer.  How can I get the correct software to reinstall?

  Help, please

  Hi @GStefanakis ,

  Welcome to the HP Forums!

  It's a great place to find answers and information!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I was unable to locate specific information about a desire dv7 - 3723 cl.

  How can I find my model number or product number?

  Here is a link on technet.microsoft.com that can help.   Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

  You can try a system restore to a date well known.  Using Microsoft System Restore (Windows 8)

  If the above did not help, I uninstall and reinstall the software Simplepass.  Using the Recovery Manager to restore the software and drivers (Windows 8)

  I hope this helps!

  

• flashback table does not

  Hello
  
  I use oracle 10g R2 on linux X 86. I got reminiscence are the true value. one of my table was accidentally truncated.
  now I want what he back.other tables are reduced thanks to the flashback technology.
  
  but this error that "the definition of table has been changed" I not made any changes to the table definition.
  
  What could be the problem? even if I have backup, but would still like to know and retrieve it using flashback.
  
  return of flame retention objective has been set at 900. and table was droped well before that.
  
  Help, please
  
  Thanks and greetings
  VD

  Well it's okay and it isn't a mistake. Flashback table does NOT work with the DDL changes that you did on your table to Truncate. If you want to return to the table with Flashback, you need to use Flashback Database technology or traditional backup and restore techniques are the only station.
  HTH
  Aman...

• Partition table does not have a valid system partition

  I am working on a Dell XPS 420 computer for a customer.  She has Windows Vista installed on it (not sure what version of Vista).

  He's doing a loop, wherever it loads to the point where I can see the bottom and the mouse, but it stops there.  After 5 minutes of him sitting on this screen, it restarts, I can't access one of the Advanced menu F8.  I tried Safe Mode, and after that it loads the crcdisk it restarts, it does with Safe Mode, Mode safe mode with networking Mode and safe mode with command prompt.  I can't use the last known configuration because it will just try to load and eventually restart.

  Things I've tried is that I ran a diagnosis of hard drive and memory, and they both pass.

  I tried the repair with the regedit option and load the system hive in the registry.

  I tried the bootrec command.

  Well I put in a disk for Installation of Vista and choose the repair option.  I did the auto diagnosis and repair option (first choice I think) and I checked the report after he finished saying that it fixes itself and needed to restart (which he did not in fact)

  Well the result that came was that the Partition Table does not have a valid System Partition.

  I tried the bootrec command, and they all said it has repaired but it did not, when I tried to do the bootrec /rebuild he gave me the message "element not found".

  I ran a test diagnosis system and I received the following message

  System test
  error code 0146
  Msg error code 2000-0146
  MSG HDD 0 - self-test log contains previous errors. Given the code and can be used by the support message technology guide to help diagnose the problem.

  be honest, I just need to know if I need to replace the hard drive or not, it's for a customer.

  I did not see if the HDD is set to AHCI or SATA in the bios again, but I will when I get home today, but I would like some answers backup.

  Hi countryboyofal,

  I suggest that you contact Dell support for the outcome of the diagnostic system.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

   

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• explore my internet does not work, please tell me how to solve this problem, it does not connect to internet

  explore my internet does not work, please tell me how to solve this problem, it does not connect to the internet while I have internet and other things could be used

  Hello

  Can you tell us more? What is the model of the unit? Do you have the same problem when using other browsers?

  Maybe you should just clear the cache or delete cookies? Try this link here.

  I hope that helps!

• Smartphones blackBerry sync error, took place - you try to synchronize again. But a resynchronization does not help.

  Hello support,

  I use my MAC for the BlackBerry Desktop Manager 1.0.3 (16) for Mac. I've updated my BB9700 5.0.0.351 to 5.0.0.59 3. I use Mac OS x 10.63 32 bit. My Blackberry synchronization but calendar entries.

  I am a customer of T-Mobile. (Prosumer)

  When I try to synchronize my contacts with my Bold 9700, comes after a few seconds, the message "sync error has occurred - you try to synchronize again.» But a resynchronization does not help. A couple of contacts (20%) are transferred, so the process is canceled again and again. undecided

  Please help me!

  HI and welcome to the forums!

  An error is displayed during the synchronization after the default calendar service is changed on the BlackBe...

  Let us know how it goes!

  Thank you

  Bifocals

• When not equal then delete target does not. Please suggest.

  When not equal then delete target does not. Please suggest.

  MERGE INTO pppp pp

  With the HELP of pppp1 p1

  WE (pp.productnr = p1.productnr)

  WHEN NOT MATCHED

  THEN

  DELETE

  Hello

  2751928 wrote:

  When not equal then delete target does not. Please suggest.

  Think about it logically, is that correct?

  You say: DELETE something that does not exist. The NOT MATCHED block will be executed only when the data being sought are not found.

  AS FAR AS I KNOW:

  For NON MATCHED block, INSERT only is allowed.

  For block MATCHED, UPDATE, and DELETE are allowed.

  Take a look at this point - ORACLE-BASE - improvements in Oracle Database 10 g MERGE statement

  Please explain, in other words English, what you are trying to reach.

• Photoshop CS6 crashes when starting my Mac. Reset preferences does not help. Download CS6 again if I have my serial number? And what do I need to uninstall the version crashed everything first?

  Photoshop CS6 crashes when starting my Mac. Reset preferences does not help. Download CS6 again if I have my serial number? And what do I need to uninstall the version crashed everything first?

  Hi christophp,

  Yes, you can do this, please follow the steps.

  Uninstall the existing version for Photoshop

  Then use the Adobe CC cleaning tool to remove files left link: http://download.macromedia.com/SupportTools/Cleaner/mac/AdobeCreativeCloudCleanerTool.dmg

  Restart the system

  Follow the link and download Photoshop CS6: applications download Creative Suite 6

  Enter the serial number to activate it.

  Let us know if that helps.

  Kind regards

  ~ Mohit

• Update iOS yesterday again does not help Revel update.

  Yesterdays iOS update still does not help the revel update. Hoped Apple update would fix the path of Revel, but not so much.

  Please see the post below updates on the issue of the revel facilities:

  Problem installing Adobe Revel 2.3.2

• AS3 clips moving table does not

  I have three video clips, I want to move randomly in a box. The following script works with a movie, but not with all the movies that have been placed in a table.

  Help, please!

  
  var clipSpeed:Number = 1;

  var speedX:Number = 0
  speedY var: number = 0

  var upperLeftLimit:Point = new Point (0, 0)
  var bottomRightLimit:Point = new Point (300, 300)

  var clipArray:Array = [clip1 clip, clip2];

  for (var i = 0; i < clipArray.length; i ++)
  {

  trace (clipArray [i])
  }

  clipArray [i] .addEventListener (Event.ENTER_FRAME, randomMove);

  function randomMove(e:Event) {}
  
  speedX += Math.Random () * clipSpeed - clipSpeed / 2;
  speedY += Math.Random () * clipSpeed - clipSpeed / 2;

  If (clipArray [i] .x + speedX > upperLeftLimit.x & & clipArray [i] .x + speedX < bottomRightLimit.x)
  {clipArray [i] .x += speedX ;}}
  
  on the other
  {speedX = 0}
  
  If (clipArray [i] there + fast > upperLeftLimit.y & & clipArray [i] there + quick < bottomRightLimit.y)
  {clipArray [i] there += quick ;}}
  on the other
  {speedY = 0}
  }

  Thank you

  then one or more of your clips start outside your limits.  and you probably don't want to use this code, because all the clips to carry the same amount of each loop.

  Try:

  var clipSpeed:Number = 1;

  var speedX:Number = 0;

  speedY var: number = 0;

  var upperLeftLimit:Point = new Point (0,0);

  var bottomRightLimit:Point = new Point (300,300);

  var clipArray:Array = [clip1 clip, clip2];

  for (var i: int = 0; i<>

  clipArray [i] .speedX = speedX;

  clipArray [i] .speedY = quick;

  }

  this.addEventListener (Event.ENTER_FRAME, randomMove);

  function randomMove(e:Event) {}

  for (var i: int = 0; i<>

  var mc:MovieClip = clipArray [i];

  mc.speedX += Math.random () * clipSpeed-clipSpeed/2;

  mc.speedY += Math.random () * clipSpeed-clipSpeed/2;

  If (mc.x + mc.speedX > upperLeftLimit.x & mc.x + mc.speedX)

  MC.x += mc.speedX;

  } else {}

  mc.speedX = 0;

  }

  If (mc.y + mc.speedY > upperLeftLimit.y & mc.y + mc.speedY)

  MC.y += mc.speedY;

  } else {}

  mc.speedY = 0;

  }

  }

  }