Compatibility of the DSC runtime 8.6 and Windows 7

Does anyone know if DSC 8.6.1 DURATION has a problem in Windows 7-64 bit OS similar to software development?

Lenvno,

Unfortunately, LabVIEW 8.6.1 is not officially supported on Windows 7 because I think you know. Most of the Windows 7 test was done with LabVIEW 2009 and 2010. However, this does not mean that you can not install the runtime of DSC and use it with your executables, but be aware that it is at your own risk and it is not supported by OR. For more information about compatibility with software OR Windows 7, see this article from Developer area.

Thanks for choosing National instruments.

Chris LS

Tags: NI Software

Similar Questions

  • Why am I suddenly "USB not recognized, one of the devices USB has malfunctioned and Windows does not recognize"

    Hi all. If anyone out there in Cyber Land can solve this problem for me so I've personally you will issue an eight-pack of ice-cold beer (or a bottle of wine for the ladies lol)...

    I'll try not to waffle too guys, so here's...

    Right my PC running Windows XP. I also have itunes installed on my PC (I have an iphone 4). Upward until yesterday my iphone and itunes were working well, (once I plugged my iphone in the itunes USB port recognised that my iphone was plugged and synchronization was fine etc.).

    But now when I plug my iphone to PC to sync with itunes, I get a pop up box on the lower right part of the screen that reads... "USB not recognized one of the USB devices has malfunctioned, and Windows does not recognize."

    After visiting about 5 different sites now "Ways to solve this problem", believe it or not, I still have the problem bloody! :(

    A site proposed shutdown PC and unplug it from the power supply, then plug it back start-up and back... this as did not work!
    The other they say that I should go to Device Manager, uninstall all the USBs then restart... it did not work either.
    Tried a system restore
    Tried to reinstall itunes

    When I check the names USB in Device Manager, there is one who reads unknown device. I am literally pulling what's left of my hair now. I tried to solve this problem for almost 2 days now and still no joy. That's why no matter what input you guys would be very appreciated. I'm no PC Wizard, so please, don't think you're patronizing me if you break down things step by step for me.

    Thank you comrades, cordially, Freddy frustrated. :)

    Another said I should go to Device Manager, uninstall all the USBs and restart.

    Usually, this works... but can be very dangerous, unless you have a PS/2 keyboard.

    I also assume that you have tried all other USB ports on the computer. tried a verified USB device (for example, a flash drive) in the USB usually when you plug in your iPhone. and I tried your iPhone in another computer (I know it's rare for an error message Windows really means what he says, but sometimes the material lacks).

    Is the charge of the iPhone when it is connected to the USB port (I don't think)?  This happened to me recently, but a reboot fixed it.  I guess that that happened to you.

    I guess that you don't see the error messages in Device Manager or you must declare them.

    You can uninstall all USB devices that do not exist as follows:

    • Open a command prompt window (start > run > cmd > OK)
    • Enter the following command and press enter

    Set devmgr_show_nonpresent_devices = 1

    • Start the Device Manager by typing the following in the same command prompt window

    devmgmt.msc

    • In Device Manager, click the view menu and select "Show hidden devices".
    • You should see a category just after "Non-Plug and Play drivers" named "other devices."  Chances are that there will be a big exclamation yellow mark beside it.  When you expand the "other devices" you should see several non identified "USB devices."  Uninstall all this.
    • Reboot (with the iPhone NOT connected).
  • I get the error of certicifiate security and windows update error?

    I get the error of certicifiate security and windows update error?

    Hello

    1. What is the full error message?

    2. What is the error code that you receive Windows updates?

    3. who is the antivirus installed on the computer program?

    4. are you aware of changes to the computer before the show?

    Discover the history of update and update verification is the origin of the problem. Also, note the details of the error.

    Check out this link to do the same thing:

    See the Windows updates are installed

    http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

    For the security in Internet Explorer certificate error, you can perform the steps described in the article.

    "There is a problem with the security certificate from the website" when you try to visit a secure in Internet Explorer Web site

    http://support.Microsoft.com/kb/931850

    See also:

    Certificate errors: FAQ
     
     
    Hope this information helps.
  • Compatibility of the sony ic recorder software and drivers with windows 7. 64 bit__

    Program downloads, when I start it, I get a message telling me the program is not responding and must stop.
    This message comes immediately after the graphics and such fact and it is immediately not functional.
    I tried the program compatibility Wizard to run the program with vista, XP, etc. with no luck.
    He asks me if I want to report the problem to Microsoft, I did, and not promises.
    The program does not work.
    I use it with older versions and drivers etc are the most recent.
    All hope?

    Hi mahannta,

    What is the exact make and model of recorder Sony?

    Visit the link below to check for Microsoft Windows 7 operating system Compatible IC Recorders from Sony.

    http://eSupport.Sony.com/us/Perl/news-item.pl?&news_id=379&MDL=ICDPX720

    Choose your model, download the drivers and let if that solves the problem.

    Hope this information helped!

    Arona - Microsoft technical support engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • I bought the game, family and have installed the new Windows 7, but by the second match, it freezes, and windows says there was a problem and needs to close the game / and or window.problems? __

    I'm having a problem with my new game, family feud.  someone can help me?   How can I solve this problem? and I'm not bad with puters... sorta self-taught.   need help it's step by step in order to follow and apply them correctly.

    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hi Newgirl11,

    Welcome to the Microsoft Answers site!

    We don't have much information about the compatibility of the game with Windows 7, you can see the link below.

    http://www.Microsoft.com/Windows/compatibility/Windows-7/enus/search.aspx?type=software&s=family%20feud

    To work around the problem, you can try to install the game in compatibility mode and check if it works very well.

    To run the troubleshooting program compatibility Troubleshooter

    1. Open the program compatibility problems by clicking on the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under programs, click on run programs for previous versions of Windows.
    2. Follow the instructions contained in the resolution of the problems.

    If you are unable to install a program, insert the installation disc for the program and, using the Troubleshoot utility, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. This utility is not designed to work on programs that have an .msi file name extension.

     

    For more details follow the link below.

    Make older programs in this version of Windows

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • What is the difference between Microsoft Update and Windows update?

    My buton start brings up "Microsoft Update" and "Windows Update". What is the difference between the 2? If I click on do get updates for both?

    Hi jt3219,

    Yes, you will have updates for each of them when you click it.
  • Difficulty for the file attribute "Update time" a file hive of the registry update on XP and Windows Server 2003

    "Time modified" attribute of a file file the registry hive is updated when you load and then unload the registry hive files without making any changes to the files on a computer that is running Windows Server 2008 or Windows Vista, or Windows 7

    I see a hotfix is provided for Windows Server 2008 or Windows Vista: http://support.microsoft.com/kb/973148/ and for Windows Server 2008 R2 or Windows 7: http://support.microsoft.com/kb/983544

    Question: I want to know if this problem is also present in Windows XP and Windows Server 2003, and if so, we have a solution already for XP and Windows 2003?

    Hello

    Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link: http://social.technet.microsoft.com/Forums/en/category/windowsserver/

  • cd/dvd missing after the replacement of hard disk and windows drive

    I have a laptop Lenovo I had to replace a hard drive, and Windows 7.  I've been able to do and got going, or so I thought.  I went to use the cd/dvd drive and nothing.  Looking at the Panel control does not show a d: / at all.  Device Manager shows a drive. (I think)  He said same drive works fine on the Properties screen.

    Any ideas on how to get it working or back?  Or should I go to ebay and get an external hard drive?

    Thank you, in advance, for any help.

    PJ

    Hello

    To isolate your concern about the CD/DVD player, is there an error message you get? Have you tried other CD or DVD?

    We also try to make the troubleshooting steps below on how to use the hardware and peripheral troubleshooting tool:

    1. Press the logo Windows + R to open the run dialog box.
    2. Control type in the run dialog box, and then press ENTER.
    3. In the Search box in Control Panel, type troubleshooting and then click Troubleshooting.
    4. Under the material and audio item, click Configure a device. If you are prompted to enter a password or provide confirmation, type the password or provide confirmation.

    If your problem is not resolved, please see this link for additional troubleshooting steps.

    Keep us updated.

    Kind regards.

  • What are originally Windows 7 junctions and the attributes of the symbolic link, security properties and Windows registry entries, supposed to be?

    To the right, or Ronnie Vernon:

    What are the original Windows 7 junctions and symbolic link attributes, properties security (full) and entries in Windows registry, supposed to be set?  And is there a Fix - it from Microsoft to reset the?  Or, is it a Microsoft Fix - it to recreate them, if they are missing (deleted)?

    Here is my list of the original Windows 7 junctions and symbolic link:

    Documents and Settings (junction)
    ["C:\Documents and Settings" (junction) = "C:\Users" (target)]

    Application data (junctions)
    ["C:\ProgramData\Application Data" (junction) = "C:\ProgramData" (target)]
    ["C:\Users\Default\AppData\Local\Application Data" (junction) = "C:\Users\Default\AppData\Local" (target)]
    ["C:\Users\Default\Application Data" (junction) = "C:\Users\Default\AppData\Roaming" (target)]
    ["C:\Users\ (UserName) \AppData\Local\Application Data" (junction) = "C:\Users\ (UserName) \AppData\Local" (target)]
    ["C:\Users\ (user name) change Data" (junction) = "C:\Users\ (UserName) \AppData\Roaming" (target)]

    Desktop computer (junction)
    ['C:\ProgramData\Desktop' (junction) = "C:\Users\Public\Desktop" (target)]

    Documents (junction)
    ['C:\ProgramData\Documents' (junction) = "C:\Users\Public\Documents" (target)]

    My Documents (junctions)
    ["C:\Users\Default\My Documents" (junction) = "C:\Users\Default\Documents" (target)]
    ["C:\Users\ (UserName) \My Documents" (junction) = '\Documents C:\Users\ (UserName)"(target)]

    Favorites (junction)
    ['C:\ProgramData\Favorites' (junction) = "C:\Users\Public\Favorites" (target)]

    Menu start (junctions)
    ["C:\ProgramData\Start Menu" (junction) = "C:\ProgramData\Microsoft\Windows\Start Menu the" (target)]
    ["C:\Users\Default\Start Menu" (junction) = 'C:\Users\Default\AppData\Roaming\Microsoft\Windows\Start the Menu"(target)]
    ['C:\Users\ (UserName) \Start Menu' (junction) = "C:\Users\ (UserName) \AppData\Roaming\Microsoft\Windows\Start Menu" (target)]

    Models (junctions)
    ['C:\ProgramData\Templates' (junction) = "C:\ProgramData\Microsoft\Windows\Templates" (target)]
    ['C:\Users\Default\Templates' (junction) = "C:\Users\Default\AppData\Roaming\Microsoft\Windows\Templates" (target)]
    ["\Templates C:\Users\ (UserName)' (junction) = 'C:\Users\ (UserName) \AppData\Roaming\Microsoft\Windows\Templates' (target)]

    All users (SymLinkD)
    ["C:\Users\All users" (SymLinkD) = "C:\ProgramData" (target)]

    Default user (junction)
    ["User C:\Users\Default" (junction) = "C:\Users\Default" (target)]

    History (junctions)
    ['C:\Users\Default\AppData\Local\History' (junction) = "C:\Users\Default\AppData\Local\Microsoft\Windows\History" (target)]
    ["\AppData\Local\History C:\Users\ (UserName)' (junction) = 'C:\Users\ (UserName) \AppData\Local\Microsoft\Windows\History' (target)]

    (Junctions) temporary Internet files
    ["C:\Users\Default\AppData\Local\Temporary Internet Files" (junction) = 'C:\Users\Default\AppData\Local\Microsoft\Windows\Temporary Internet Files"(target)]
    ["C:\Users\ (UserName) \AppData\Local\Temporary Internet Files" (junction) = "C:\Users\ (UserName) \AppData\Local\Microsoft\Windows\Temporary Internet Files" (target)]

    Cookies (junctions)
    ['C:\Users\Default\Cookies' (junction) = "C:\Users\Default\AppData\Roaming\Microsoft\Windows\Cookies" (target)]
    ["\Cookies C:\Users\ (UserName)' (junction) = 'C:\Users\ (UserName) \AppData\Roaming\Microsoft\Windows\Cookies' (target)]

    My music (junctions)
    ["C:\Users\Default\Documents\My Music" (junction) = "C:\Users\Default\Music" (target)]
    ["C:\Users\ (UserName) \Documents\My Music" (junction) = '\Music C:\Users\ (UserName)"(target)]

    My photos (junctions)
    ["C:\Users\Default\Documents\My Pictures" (junction) = "C:\Users\Default\Pictures" (target)]
    ["C:\Users\ (UserName) \Documents\My Pictures" (junction) = "C:\Users\ (UserName) \Pictures" (target)]

    My videos (junctions)
    ["Video C:\Users\Default\Documents\My" (junction) = "C:\Users\Default\Videos" (target)]
    ["C:\Users\ (UserName) \Documents\My vidéos" (junction) = "C:\Users\ (UserName) \Videos" (target)]

    Local settings (junctions)
    ["C:\Users\Default\Local Settings" (junction) = "C:\Users\Default\AppData\Local" (target)]
    ["C:\Users\ (UserName) \Local Settings" (junction) = "C:\Users\ (UserName) \AppData\Local" (target)]

    Neighborhood Network (junctions)
    ['C:\Users\Default\NetHood' (junction) = "Shortcuts C:\Users\Default\AppData\Roaming\Microsoft\Windows\Network" (target)]
    ["\NetHood C:\Users\ (UserName)' (junction) ="C:\Users\ (UserName) \AppData\Roaming\Microsoft\Windows\Network shortcuts"(target)]

    Print neighborhood (junctions)
    ['C:\Users\Default\PrintHood' (junction) = "Shortcuts C:\Users\Default\AppData\Roaming\Microsoft\Windows\Printer" (target)]
    ["\PrintHood C:\Users\ (UserName)' (junction) ="C:\Users\ (UserName) \AppData\Roaming\Microsoft\Windows\Printer shortcuts"(target)]

    The latter (junctions)
    ['C:\Users\Default\Recent' (junction) = "C:\Users\Default\AppData\Roaming\Microsoft\Windows\Recent" (target)]
    ["\Recent C:\Users\ (UserName)' (junction) = 'C:\Users\ (UserName) \AppData\Roaming\Microsoft\Windows\Recent' (target)]

    SendTo (junctions)
    ['C:\Users\Default\SendTo' (junction) = "C:\Users\Default\AppData\Roaming\Microsoft\Windows\SendTo" (target)]
    ["C:\Users\ (UserName) \SendTo" (junction) = 'C:\Users\ (UserName) \AppData\Roaming\Microsoft\Windows\SendTo' (target)]

    (End of list)

    JPD

    Hi all

    I found answers to my question on "Windows 7 Help Forums" http://www.sevenforums.com/> and a program to recreate and fix all the original Windows 7 hubs and symlink [attributes and security properties (full)], called 'Junction box' [site Web of Documentation: http://iwrconsultancy.co.uk/junctionbox>; and the download Web site: http://sourceforge.net/projects/junctionbox/?source=dlp>].

    I also found that there are more original than those listed above junctions.  My advice is to remove all the junctions, you could have recreated manually (or move them to your backup drive) before running "JunctionBox.exe" (using its configuration file "DefaultJunctions.ntj").  Then run it two or three times; because it is not recreate all the original joints the first time you run it.  It recreates the together the legacy of windows (see below), by default (C:\Users\Default), all users (C:\Users\All) and the current user (C:\Users\%UserName%), junctions on the first throw, but not the junctions of temp (C:\Users\Temp) and their targets. - you must re-create the junction target temp manually, yourself, if you want them to run.

    Here is MY updated 'Junction Box' 'DefaultJunctions_2.ntj' list of configuration files (list of all the original Windows 7 junctions):

    ; ===(Start of List) =.

    ; A list of the standard set of junctions in Vista and Windows 7, for the purpose of repair.
    ;
    ; The notation is as follows:
    ;  Section headers are userprofile-records unless otherwise noted by a full path.
    ;  Paths starting with a-specify a full path to the system root. (Usually C:\)
    ;  Starting paths by are relative to the container profile. (Usually C:\users)
    ;  Location paths and junction target are compared to [value] section header without qualifier.
    ; Default profile settings apply to all generic users when profiles are repaired.
    ; You can add sections for specific users, if it is not normally necessary.
    ; Wildcard characters or macros other that those listed above are not allowed.
    ; Junctions will be created using the target-full paths, regardless of the values relative or complete here.
    ; Note: Non-English speaking users will need to create their own file, sorry.

    [General]

    ; Displays warning if incompatible OS or system-language is found.
    OSVersions = WIN_VISTA, WIN_7, WIN_2008, WIN_2008R2, WIN_LONGHORN
    OSLanguages = 0409, 0809

    ; Force the creation of junctions in system or user files, or both.
    ; = 1 recreates (parts of)-structure of profile folders missing. Relatively safe to use.
    ; = 2 strength deletes any file, folder or the junction occupying the location target.
    ; -valuable when it comes to corrupt junctions, but use them carefully because may delete data.
    ; Default value is to leave alone the existing junctions and add only those missing, but set correct permissions on all.
    SystemForceCreation = 0
    UserForceCreation = 0

    ; The following sections refer to disk files and necessary for each, junctions as JunctionName = JunctionTarget.

    [\]
    Documents and Settings = @

    [\ProgramData]
    Application data = \ProgramData
    [email protected]\Public\Desktop
    [email protected]\Public\Documents
    [email protected]\Public\Favorites
    Start = Menu Microsoft\Windows\Start menu
    Templates = Microsoft\Windows\Templates

    [@]
    Default user = default

    [All users]
    Application data = \ProgramData
    [email protected]\Public\Desktop
    [email protected]\Public\Documents
    [email protected]\Public\Favorites
    Start = \ProgramData\Microsoft\Windows\Start Menu menu
    Templates = \ProgramData\Microsoft\Windows\Templates

    [Public]
    Documents\Ma music = music
    Documents\My pictures = pictures
    Documents\My videos videos =

    [Default]
    ; (intentionally blank)

    [Default]
    Application data = AppData\Roaming
    Cookies = AppData\Roaming\Microsoft\Windows\Cookies
    Locale = AppData\Local
    My Documents = Documents
    Neighborhood Network = AppData\Roaming\Microsoft\Windows\Network shortcuts
    Print neighborhood shortcuts = AppData\Roaming\Microsoft\Windows\Printer
    Recent = AppData\Roaming\Microsoft\Windows\Recent
    SendTo = AppData\Roaming\Microsoft\Windows\SendTo
    Start = Menu AppData\Roaming\Microsoft\Windows\Start menu
    Templates = AppData\Roaming\Microsoft\Windows\Templates
    AppData\Local\Application data = AppData\Local
    AppData\Local\History = AppData\Local\Microsoft\Windows\History
    AppData\Local\Temporary Internet Files = AppData\Local\Microsoft\Windows\Temporary Internet files
    Documents\Ma music = music
    Documents\My pictures = pictures
    Documents\My videos videos =

    [% Username %]

    ; (Replace above [%nom user %] [(ID)] - variable may not work!)

    ; (Same as the default value)
    Application data = AppData\Roaming
    Cookies = AppData\Roaming\Microsoft\Windows\Cookies
    Locale = AppData\Local
    My Documents = Documents
    Neighborhood Network = AppData\Roaming\Microsoft\Windows\Network shortcuts
    Print neighborhood shortcuts = AppData\Roaming\Microsoft\Windows\Printer
    Recent = AppData\Roaming\Microsoft\Windows\Recent
    SendTo = AppData\Roaming\Microsoft\Windows\SendTo
    Start = Menu AppData\Roaming\Microsoft\Windows\Start menu
    Templates = AppData\Roaming\Microsoft\Windows\Templates
    AppData\Local\Application data = AppData\Local
    AppData\Local\History = AppData\Local\Microsoft\Windows\History
    AppData\Local\Temporary Internet Files = AppData\Local\Microsoft\Windows\Temporary Internet files
    Documents\Ma music = music
    Documents\My pictures = pictures
    Documents\My videos videos =

    [Temp]
    ; (Same as the default value)
    Application data = AppData\Roaming
    Cookies = AppData\Roaming\Microsoft\Windows\Cookies
    Locale = AppData\Local
    My Documents = Documents
    Neighborhood Network = AppData\Roaming\Microsoft\Windows\Network shortcuts
    Print neighborhood shortcuts = AppData\Roaming\Microsoft\Windows\Printer
    Recent = AppData\Roaming\Microsoft\Windows\Recent
    SendTo = AppData\Roaming\Microsoft\Windows\SendTo
    Start = Menu AppData\Roaming\Microsoft\Windows\Start menu
    Templates = AppData\Roaming\Microsoft\Windows\Templates
    AppData\Local\Application data = AppData\Local
    AppData\Local\History = AppData\Local\Microsoft\Windows\History
    AppData\Local\Temporary Internet Files = AppData\Local\Microsoft\Windows\Temporary Internet files
    Documents\Ma music = music
    Documents\My pictures = pictures
    Documents\My videos videos =

    ; ===(End of list) =.

    MY updated the 'Junction Box' 'DefaultJunctions_2.ntj' configuration file should do the job in the first race of the program.

    JPD

  • What is the difference between @hotmail, @msn and windows live? I would get all my emails for msn consolidated under a domain name? What is the agent email address?

    I want to consolidate my Microsoft email afcounts to make it easier to manage. I have an e-mail address using MSN.com and another under Hotmail.com. Is an advanced features/used more than the other? What is the difference between the two? What is the main e-mail client windows?

    While I'm here: my laptop is able to make screenshots and post on other email such as yahoo. I couldn't when I go into my windows "Hotmail" account." DOE this email client have this ability? Or is there a few hoops that I have escaped thanks to do this? Please notify. Thank you for your time. Elliot

    Hello

    Please see the link below.

    http://Windows.Microsoft.com/en-us/Windows7/products/features/email

    I would also please contact the Windows Live Mail team for assistance.

    http://windowslivehelp.com/product.aspx?ProductID=15

  • Little lag when you use the Tablet Wacom on LR6 and Windows 10

    Hello, I have recently upgraded to Windows 10. I have the latest version of Ligtroom 6.

    When I use my Wacom Bamboo tablet and try to move a cursor, initially it does not, move initial position, it climbs to approximately + 5 or - 5. If I continue to slide, it follows then correctly my movement of the stylus.

    I tried to reinstall the drivers, but it didn't fix it. He nevere, that has happened with previous versions of Lightroom and it does not occur with any other application.

    Is this a known bug?

    In the Wacom tablet properties / Grip Pen / Mapping of audit of the tab to see if "Use Windows Ink" is unchecked.

    (It was the fix/work around in previous versions of versions/LR pilot).

    It looks like when you improve either LR or your Wacom driver, that it gets reset back to the manufacturer.

    When I was with LR2015.1 I had to have the setting ink disabled Windows so that the Wacom pen works properly

    Just check now and in ink of Windows LR2015.2 has been activated and it works well.

    I have not yet upgraded to LR2015.2.1 to see if I need to disable Windows ink again to make it work with this latest version.

    Currently my Wacom driver is 6.3.14 - 1 (don't has not amended it LR 2015.1 to LR2015.2)

  • The point on the compatibility of the browser with HTML5 video and mp4s?

    I currently have a mp4 video on my site, and the video is currently hosted by YouTube. But I would like to move it to our web server using the HTML5 video element. So far, pretty simple:

    < div id = "videodiv" >

    < src = "videos/video my_video.mp4" control width = '100% ' > < / video > "

    < / div >

    What I read, I was ready to provide alternative (webm and ogg) formats, but I tested it with Firefox, Chrome and IE10, and they seem to all work. I do not have to provide three versions of the video, because it is a precursor to a 8 added more videos to our Web site. The browser world all got on board with mp4 now, or do I always have to provide alternatives?

    Thank you

    http://techslides.com/demos/sample-videos/small.MP4' type = "video/mp4" >

    If you don't see this, you are using a

    outdated browser that does not support

    the video tag.

    All modern browsers now support MP4.  Not so a few years ago. So we used relief WEBM and OGG.

  • How can I get rid of locate the browser link using Outlook and Windows 7?

    I have Windows 7 and use Outlook 2003 and use them on multiple computers, but after wiping on my desktop computer and reinstall everything, now, whenever I hit a link on an email, I get a window asking locally, the browser link. Then it hangs for a long time. What can I do to fix this? Also, when trying to open the link, it remains in the background and I put Outlook in the taskbar to display the linked Web page

    It should apply as well to Windows 7. It is likely to be caused by the DDE for Firefox.

  • Compatibility of M50D-A satellite - 10 N, and Windows 7

    I bought Satellite M50D-A - 10 d computer laptop with pre-installed windows 8.1. I want to delete Windows 8.1 and I want to install Windows 7. Is this possible?

    I found the drivers for Windows 7 64-bit on Toshiba website. In my opinion, that means installing Windows 7 is possible. It's logical. My question is how? I tried to install any USB device, but the installation was unsuccessful because the system does not have a pilot. Driver for what? AHCI? Or what? Driver for usb, ahci, touchpad has been downloaded, but there was no lack of driver. Another problem was the touchpad does not work for this time.

    I'm completely puzzled, what is the problem?

    If you want to install Windows 7, you must disable secure boot and need to pass the boot UEFI on AHCI mode.
    Then install Win 7 should work!

  • Unable to fix the daylight of saving time and windows time zone

    original title: summer time (dst} and zone schedule windows.) will not correct when using fix it Center or by any other recommendations suggested by windows solutions why.

    summer time (dst) and time zone windows, correct, using fix it Center or by all the recommendations of qther by the windows Solution Center please notify

    Hello

    ·        What operating system is installed on your computer?

    ·        What happens when you run Microsoft fixit?

    ·        Which is exactly the problem that you are facing in the time and time zone in Windows?

    Please see: How to configure daylight saving time for Microsoft Windows operating systems

    http://support.Microsoft.com/kb/914387

    Post back with the required information so that we can help you further.

Maybe you are looking for