Compatibility of the presets to export between CS5.5 and CS6?

Similar Questions

• Differences between CS5.5 and CS6 for iOS development and export?

  I'm just curious about how Flash Professional CS5.5 is compromised in this regard.

  And is it possible to compensate for any differences by installing a package update or software development kit?

  Thank you

  performance is better because of the air sdk.

  So yes, if you can install it on your 5.5 3.6 (the last air ios sdk), you should get the same performance as any other version of cs flash using 3.6

• Setting the presets for export assistance. FLV

  I need help to customize the presets to export a file to the .flv format. Here's what I need Adobe export to:

  . FLV

  320 x 240

  4:3

  800 Kbps

  29 97 fps

  Audio - 44 khz 66 kbps stereo

  Jesse_Martinez (Calvary)

  Your needs are specified in the

  . FLV

  320 x 240

  4:3

  800 Kbps

  29 97 fps

  Audio - 44 khz 66 kbps stereo

  You can accomplish almost all in the first of 12 elements, but there is a problem reaching the exact audio sampling combination speed/flow that you list.

  In first Elements 12, go to publish + share/computer/Adobe Flash Video and presets select = FLV - great NTSC Web Source (Flash 8 or higher) On2VP6 MP3 FLV

  On the Advanced Settings button and video tab, adjusts

  Remove the link between the height and the width of the frame and the type of

  Width of the frame = 320

  Frame height = 240

  Bitrate = 800 kbit/s (kilobits per second)

  On the button tab / Audio advanced, adjusts

  Output channel stereo =

  Bitrate settings - This is where it gets complicated... There is no set rate/frequency = 44 kHz sampling or other. There is no audio bitrate of 66 kbps (64 Kbps is closest to you), it seems to be a sampling frequency associated with export, but visible once you have export and examine its properties in a program like MediaInfo.

  Here's what I found

  If the audio bitrate is 64 Kbps, sampling rate is 22.05 KHz

  If the audio bitrate = 80 Kbps, sampling rate is 22.05 KHz

  If the audio bitrate = 96 Kbps, then the sampling frequency 44.1 KHz

  If the audio bitrate = 128 Kbps, then the sampling frequency 44.1 KHz

  Are there trade-offs for you, or you must have the exact values you posted?

  H.264 AAC F4V

  If you export your Timeline as F4V, so you can create sampling rate of 44.1 KHz and bitrate 64 Kbps.

  We can discuss the other parameters not mentioned later once we have worked around the core ones.

  Please see the bulletin.

  Thank you.

  RTA

• When I try to use a MS fingerprint reader I get the message "no mapping between account names and security IDS was done."

  Original title: fingerprint digital mapping

  When I try to use a MS fingerprint reader I get the message "no mapping between account names and security IDS was done."

  I tried the fix (http://support.microsoft.com/kb/890737?wa=wsignin1.0) without success.

  Any ideas?

  Hello

  Have you tried to reinstall the fingerprint reader, as mentioned in the previous post article?

  If your computer is on a domain, the question you posted would be better suited for the IT Pro TechNet public. I would recommend posting your query in the TechNet Forums to get help:
  Windows XP IT Pro Forums
   
  For more information, see the articles:
  Understand and configure the Welcome screen and the classic logon screen
   

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Where is the MPEG-2 export of CS5?

  Hello, I just installed first Pro CS5 demo and there is no export MPEG-1, 2, or MPEG - 2 DVD in first encode pro or media.

  What Miss me?

  Thanks remainz

  You missed the message that says that the trial version does NOTHING with MPEG of any flavor

  Will be no import or export of

• two computers: how to synchronize the presets to export plugin?

  My apologies if this question has already been addressed, but I the have not found on the forum.

  How should I treat the following situation. I have two computers (desktop and laptop), and office works as my "master". I want to copy presets to export to my laptop to work on the road, including the presets that include settings for plugins to export (LR2/Mogrify and MetadataWrangler)?

  I have easily have identical versions of the plugins in both computers, but how do I synchronize the present export? Is it as simple as simply copy the contents of the ...\Application Data\Adobe\Lightroom\Export Presets\User Presets? Before testing, just I'd rather hear if the solution is as simple as that, or if manually copy presets would spoil the setting LR on laptop?

  Running Windows XP and Lightroom 2.3.

  Thank you is advanced.

  Simply copy them to all should be good because they are autonomous. The area you should check would be references to specific disk drives.

• How can I transfer the presets I created between accounts

  Hello, I've created presets in Pr Pro connected under my Admin account.  The presets appeared when I created a new project then in the Admin account.  But when I switched to my account the presets do not arise.  I would use these preset is the other account that I have where I work normally.  Where they are stored and how to make them to my other user accounts.

  Thank you

  Well, that changes things. However, you should be able to search for similar terms using Spotlight and you will find the path. It is somewhere in your home/user directory. I do not work with the Organization on the Mac, so I can't be more specific.

  Well right Jim - most of the programs like first is happier and tend to cause problems if they are running under an administrator account. Which is not to say that you can not run it under a standard user account, but who will be the first thing that most user and tech support will tell you if you have any questions. As long as you're not connected to the internet with your editing machine, there is no good reason not to use the Admin account.

  ADDENDUM: I think that the file you are looking for is 'Effect Presets and Custom Items.prfpset'. It is in the directory that I mentioned above. Also note that you can export your presets for effects from the effects to the files bin individual .prfpset you can switch to different platforms and then import them into the new platform where they form part of the file 'effect Presets and Custom Items.prfpset '.

• Need help to make the adjustments to TCP between Labview 2011 and webrelay

  Hello

  I'm using Labview 2011 and trying to establish communication with webrelay (X-WR-4R1-l) to control its relay.

  I downloaded a www.ni.com example but it does not work.  (he was tied with this thread as well)

  I did no changes in the example program, that I do not really understand much codes XML.

  I turned ON all 4 relays this webrelay, but in labview, it reads that the relays are turned OFF.

  and when I click the button on the front panel, it does nothing.

  There are several toolkits labview installed in my PC, namely:

  -labview development system

  -application builder

  -recording of data and control module

  -Database connectivity kit

  -internet Toolbox

  -report generation toolkit for Microsoft office

  I'd appreciate it if someone could guide me in this configuration process.

  Thank you

  OK, we're making progress...

  Something seems truncated. Is there something after realy4state in the received string? Because the string is longer, you will need to adjust the number of bytes read. It's more than the 157, which corresponds to the current setting.

  In all cases, their example LabVIEW is a unique feature of relay. You need to look at section 3.2 of the manual that you set for the correct orders. Now there is always a number between 'relay' and 'State' for example:

  1State = 1 for relay activate relay 1.

  You must do two things:

  Write a trainer who composed the correct channels based on the selected relay.

  Write a parser that retrieves the status of all four relays relay. (the offsets will be different, for example)

  I recommend you to treat the four relays as an array of four Boolean values.

• Problem to create the Internet connection sharing between Windows XP and Windows Vista.

  Original title: Internet connection sharing between Windows XP and Windows Vista.

  Hello

  Recently, I plugged a laptop running Windows XP to a desktop computer running Windows Vista using a standard Ethernet cable with the intention of use sharing of Internet connection. The notebook contains a wireless connection that I've routed to the office via the cable said.  While the initial phase of installation went well (I was too lazy to do it manually, so I just used the Wizard "Set up a home or small business network" Windows XP,) I had to turn off the host computer to install a program. When I tried to set up ICS again, I couldn't connect to the Internet by using ICS. After this failure, I tried to configure the properties of TC/IPv4 (IP, gateway by default, etc.) manually, but I still couldn't run.  I am able to access the shared host PC and client files. It seems to me that some service essential to the proper functioning of the ICS may be disabled in some way, but it's just speculation, as I have no evidence of such a service. Help would be most appreciated.

  Thank you

  FG-man

  I tried this before using a laptop to share internet with my 360.  problem is there was Nat on the router, and it is in contradiction with the ics.

  Anyway long story short I did some research on the Internet and discovered that if you're behind a router ICS will be confllict with her, as ICS also does routing. a much better option is to "bridge the conections ' on the laptop.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/hnw_bridge_install.mspx?mfr=true

  If you go this route, you need to set a static ip address for the office,

  Either that or if you want to continue using ICS put the laptop in the DMZ in the router may help, but it will be less secure.

  Hope that this helped good luck

• Gap on the field of Action between workbench ASIC and msc_orders_v

  Hello
  
  The form of workbench CAWC seems based on the view MSC_ORDERS_V unfortunately, using the view, that I have a 'Libération' action even if it is 'None' in the form of CPHA workbench.
  Could you explain to me why?
  There is a snapshot taken at the end of the MRP?
  
  Thanks in advance.

  Hello

  Based on what you say that 1 other person sees it as liberation and the rest as none, then this is definitely a setting in preferences.
  Very probably in tools - options - other tab. Look here in the supply and demand of area. There are 3 options for release. Check if these are defined differently between your username and where you see the expected results.

  Best regards
  Geert

• My Wacom Graphire4 graphics tablet works only with the pen pressure, OK in CS5 but not CS6...

  I am Windows 7 Professional 64 bit and still have the CS5 and CS6 64 bits loaded.  I've used my tablet with stylus Graphire4 with CS6 will detect all problems.  All of a sudden it only works with the pen pressure even if the stylus pressure is off.  I'm trying to use it as a mouse and frequently use shift/click when you change a mask.  I can do it no longer.  If I run CS5 the pen works as it should but not CS6.  When I first open the CS6 with visible brush the brush palette shows a hard brush, but when I open a file it turns into sensitive pressure without measure by me.  I have reset the brushes, re-installed the driver and finally downloaded a driver more but the problem persists.  Because it works very well in CS5 but not CS6 it must be a problem to Adobe.  It's very frustrating.  I enclose a composite image showing what happens to the CS6.  The right side shows what looks like the brush palette until I open a file.  The left side shows what happens when I open a file.   Even if I do not open a file and make changes within the brush palette, it immediately turns to pen pressure.  It's very strange.

  I would of course someone can provide information that could help.

  Kind regards... Ralph

  

  No answers, but in the meantime, I have come into contact with Adobe.  Problem has been resolved by phone.  Resolution is to delete the preferences file reopen CS6, date at which the PS automatically creates a new preferences file.  It was she, corrected a problem... Ralph

• Problem with transmission of the data in table between a driver and a method.

  I'm having a problem with a project for school. We want to take the data in a table, we create in our driver, pass it to the method, do something for her and return the data to the driver. Well, I still get the same error message and after looking at dozens of sites, it seems that I think that I have the correct code... but I still get the same error message. Here is the error message that I've been doing.
  * ola1driver.java:35: get() in ola1method may apply to (char [] [])
  x.get (Dar);
  (upwards arrow pointing between x and get) *.
  
  I'd appreciate any help I'm leaving research to simply looking at my code to try to find the error. My wife things I'm going nuts at the moment.
  
  Here are my two files, the first is the driver and the second method
  
  Take a 2D array and send the data to a method, and then put it back
  import java.util.Scanner;
  class ola1driver
  {
  Public Shared Sub main (string args [])
  {
  Entrance to the parser = new Scanner (System.in);
  ola1method x = new ola1method();
  Char [] [] dar = new char [10] [100];
  char dat_input;
  
  Set up the loop at the entrance a table of 10 x 100 with data imported from a dat file
  for (int i = 0; i < 10; i ++)
  {
  for (int j = 0; j < 100; j ++)
  {
  dat_input = input.next () .charAt (0);
  Dar [i] [j] = dat_input;
  }
  }
  Send the array to the method and displays the original table to compare the return data
  x.Set (Dar);
  for (ip int = 0; ip < 10; ip ++)
  {
  for (int jp = 0; jp jp; < 100 ++)
  {
  System.out.printf ("%n", dar [ip] [jp]);
  }
  }
  
  To get the data of the method and then print the data in the table opposite
  x.get (Dar);
  
  for (int r = 0; r < 10; r ++)
  {
  for (int c = 0; c < 100; c ++)
  {
  System.out.printf ("%n", dar [r] [c]);
  }
  }
  }
  }
  
  Now the method;
  
  Method to receive a 2D painting, reverse the data and then put it back
  class ola1method
  {
  Char [] [] ar = new char [10] [100];
  Char [] [] rar = new char [10] [100];
  
  public void set (char [] [] ar)
  {
  / * To reverse the entries in the table
  to prove that real return
  data was transferred between the driver
  and the method * /
  IR int = 0;
  for (int i = 9; I have > 0; i-)
  {
  for (int j = 100; j > 0; j-)
  {
  int jr = 0;
  RAR [ir] [Jr.] is ar [i] [j];.
  Jr ++;
  }
  
  IR ++;
  }
  }
  Return the data to the driver
  public char [] [] get()
  {
  return of rar;
  }
  }
  
  Published by: Seamus on February 20, 2011 08:25
  
  Published by: Seamus on February 20, 2011 08:26

  Seamus wrote:
  I thought that I sent my method by using the x.set table, and then by calling the reversed with the x.get table.

  x.Set (someArray) in fact to 'send an array to the method '.

  And if x.get () is declared to return an array, then, Yes, it indeed 'retrieve a table. "

  However, these are two completely different methods. The get method doesn't know something on the table sent via the set method unless the game puts a place who knows himself. For example, something like this:

  public class X {
    private int[] arr;
  
    public void set(int[] arr) {
      this.arr = arr;
    }
  
    public int[] get() {
      reverse arr and return it
    }
  }
  
  public class Main {
    public static void main(String[] args) {
      int[] arr1 = {1, 2, 3};
      X x = new X();
      x.set(arr);
      int[] arr2 = x.get();
    }
  }
  

  However, this seems a bit unusual. It is not clear from your initial post, but looks like it is supposed to be a single method that takes the array and it reverses. If so, you could either simply invert the table and returns nothing, since the variable of the appellant and the parameter of the method will all be pointing to the same table object, or you could return a reference to the table that you have received and reversed, or you can copy the table, reverse the copy and return a reference to that.

  I don't know what your needs are, but the point is that it is more common to call a single method to do something like that, rather than separate set() and get() methods.

  Edited by: jverd February 20, 2011 09:36

  Edited by: jverd February 20, 2011 09:37

• Dynamically calculate the number of days between two dates and amounts of split

  Hello
  
  I have searched for a solution for this, but had no success.
  I need to show the amounts broken down by days.
  
  I have a table that has an amount column and start and end dates.
  
  I need to write a query so that the amounts will be broken evenly based on the number of days between the start date and end date.
  
  For example, for this line.
  insert into my_test values (' 1, '' 3-mar-2010, ' 7 - mar - 2010 ", 1000);
  
  the query returns this (split $1,000 over 5 days)
  
  
  ID Date amount
  1 ' 3-mar-2010' 200,00
  1 ' 4-mar-2010' 200,00
  1 ' 5-mar-2010' 200,00
  1 ' 6-mar-2010' 200,00
  1 ' 7-mar-2010' 200,00
  
  
  
  create table my_test)
  ID number (10),
  start_date date,
  End_date date,
  amount number (10.2)
  );
  
  
  Select * from my_test
  
  insert into my_test values (' 1, '' 3-mar-2010, ' 7 - mar - 2010 ", 1000);
  insert into my_test values (2, 10-mar-2010 ", 19-mar-2010", 2000);
  insert into my_test values (3, 20-mar-2010 ',' 21-mar-2010, 5000);
  
  
  
  Thanks in advance.

  Hello

  One way is to join a Meter of Table , a table, or (more often) a set of results includes a line for eery number 1, 2, 3,... until the maximum number of times you need to divide a line.
  For example:

  WITH     cntr     AS
  (
       SELECT     LEVEL - 1     AS n
       FROM     (  SELECT  MAX (end_date - start_date)     AS max_day_cnt
               FROM        my_test
            )
       CONNECT BY     LEVEL <= 1 + max_day_cnt
  )
  SELECT       t.id
  ,       t.start_date + c.n                    AS dt
  ,       t.amount / (t.end_date + 1 - t.start_date)     AS amt
  FROM       my_test      t
  JOIN       cntr            c     ON     c.n <= t.end_date - t.start_date
  ORDER BY  id
  ,            dt
  ;
  

  This assumes that all dates have the same number of hours, minutes, and seconds, as is the case in your sample data.
  If this isn't the case, then use TRUNC (start_date) and TRUNC (end_date) instead of start_date and end_date or post some sample data and results if some lines do not represent a whole number of days.

• The difference in performance between wins 8 and win 7.

  What performance difference is there between winning 8 and win 7, or does go through whats in win 8 which is not in win 7?

  What performance difference is there between winning 8 and win 7, or does go through whats in win 8 which is not in win 7?

  http://www.TechSpot.com/review/561-Windows8-vs-Windows7/

  http://www.TechRadar.com/us/news/software/operating-systems/Windows-8-vs-Windows-7-8-ways-its-different-1025285

  http://www.askvg.com/comparison-between-Windows-7-and-Windows-8-memory-management-system/

• Transfer CS5.5 and CS6 upgrade to new mac without installation disk

  Hi, I bought a new iMac and want to transfer my high-end Design CS6 on him. The problem I have is that I have more the installation CD even though I have the serial number. To complicate things more far, my CS6 is an upgrade of CS5.5 and I have more drive for be even though I have the serial number. I have not the disks it is because they were purchased for me by a small design agency I worked for who has since been dissolved. Is there something I can do?

  Yes, it will be.

  After you have entered your serial number, Setup detects that it is a serial number update and check your computer for a product (cs5.5) calling.  failing to find that it will ask you to select your product in a combobox control and after selecting the cs5.5, you will be asked your cs5.5 serial number.

  Enter the correct number at the right time and your facility should move forward.