complete a report and start the following in a sequence

Similar Questions

• This copy of windows is not genuine windows 7 build 7601. I ran the diagnostic report and obtained the following information can help you? I know that I am using a valid license. Diagnostic report (1.9.0027.0):

  Is someone can provide the number of ph for the activation of the micrtosoft for North America?

  Your installation of Windows 7 is NOT genuine-

  It is based on a key OEM_SLP - that can only be used on machines on which it has been installed at the factory.

  You machine was manufactured long before Windwos 7 came out and cannot therefore support a license for WIn 7 OEM_SLP

  You must reinstall the orginal of exploitation ysstem for this machine, or buy a legal copy of Windows 7

• When I try to connect to hotmail and received the following message ' sorry, there's a problem with Hotmail right now Hotmail was not able to complete this application.

  Hi, I try to connect to hotmail and received the following message ' sorry, there's a problem with Hotmail right now Hotmail was not able to complete this application. Microsoft may contact you about any matter that you declare "what steps should I take as I have urgent e-mail to check." THX

  Hello

  Looks like a temporary problem.

  Answers is a peer group supported and unfortunately has no real influence on Hotmail.

  HotMail has its own Forums, so you can ask your questions there.

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Error message "your account has been locked" when trying to connect
  http://windowslivehelp.com/thread.aspx?ThreadId=77be7d82-a0e9-49c7-b46d-040ec654a9e2

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• My computer laptop stop periodically and gives the following codes BCCode d1, 00000010 BCP1, BCP2 00000002 BCP3 00000001, 8A25F1C8 BCP4.

  My stop laptop periodically and gives the following codes:
   
  BCCode d1
  BCP1 00000010
  BCP2 00000002
  BCP3 00000001
  8A25F1C8 BCP4

  I was not able to find a solution to restart windows by clicking find a solution online. The system is free of viruses and other items malcious. Any ideas would be helpful because my laptop did not come with a repair disc and I'm afraid to make one with these questions.

  Thank you

  Hello

  Think video drivers especially if it may be others. Refer to the section of driver in my generic bluescreen
  methods of troubleshooting below. BIOS, low and antispyway/antivirus/security chipset drivers
  programs may also cause this. Check the resolution of problems and when you get to the section driver view
  for generic methods in the next message and then back to the if necessary troubleshooting tool.

  BCCode: D1 0x000000D1

  Cause

  A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.

  This bug check is usually caused by drivers who used a wrong address.

  If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:

  • The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
  • The function call was made to a function in another pilot, and that this driver has been unloaded.
  • The function was called by using a function pointer that was an invalid pointer.

  ======================================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, drivers particularly video drivers but it
  are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• When I delete the "screensaverissecure" with the registry value, it reappears again in the registry after I stop and start the system the next day. Help, please

  When I delete the "screensaverissecure" with the registry value, it reappears again in the registry after I stop and start the system the next day. Help, please
  use widows xp

  Hello

   
  1. Have you tried to Hibernate for ever in the power settings option?
   
  To resolve this problem, you can follow the steps below.
   
  (a) click and start
  (b) type power Option in the start search bar.
  (c) now select click Change plan for the current plan of the selected power.
  (d) now click on advanced power settings.
  (e) scroll down and click on the sign more next to sleep.
  (f) now click on allow the eve hybrid and turn it off.
  (g) click on the option put into hibernation after and set it to never.
   

• Installed wireless Belkin, unable to see network, get error windows cannot configure this wireless connection and starting the WZC abuse

  Hello

  I have a belkin wireless router that worked on my primary computer and a portable computer for years.

  Recently, I moved my main computer and now it dosnt seem to work. Belkin is installed but when I ask to see available networks, it says that windows cannot configure this wireless connection and starting the WZC abuse. Belkin still works fine on my laptop so I know no there is not a problem here. Can someone help me please? I tried to type in %SystemRoot%\system32\services.mcs\s as with a question of people, but all I get is windows can't find this.

  Any ideas please?

  Thank you

  * original title - Help... problem with belkin wireless *.

  Let's see if I can cut through it.

  You wrote:

  Click the Wireless Networks (see this picture) - I did

  Is the box 'Use Windows to configure my wireless network' checked or unchecked? There is no such box.

  I connect using - he says belkin. another box saying this connection uses the following items. then underneath there are 3 tabs - install, uninstall and properties. If I press on properties it says name provider and in this box, it says windows index.

  It seems that you don't have not clicked the "Wireless networks" tab, after you open the properties of your wireless adapter.  From your description, you look at the 'Général' tab: click HERE to see the "Général" tab Click HERE to see the 'Wireless Networks' tab.

  There are 5 columns: name, description, status, startup type and log as.  The values for the last 3 columns should be started, automatic and Local System - on my screen there are 4 tabs at the top - general, connect you, recovery and dependency.

  You skipped a step... 5 columns are in the 'Services' window initial... you arrive at "4 tabs at the top", AFTER you double-click the Wireless Auto Configuration.

  Status of the service which includes 4 boxes. stop suspend and resume. the button highlighted in the start menu

  Just to the right of the expression "Service status", you should see a Word.  On your system, this word probably is "stopped."  The 4 buttons (boxes) are how to control the service.  Because you said that the highlighted button is 'start' which means that the service is currently stopped, and you will need to click on this button "start" to start.

  I strongly suspect that you had used the Belkin utility to control your adapter - and now, you also started WZC.  As I wrote above, you can have both running at the same time.

  When you click the icon of your "Belkin", do you have a screen that looks like this: http://www.wi-fiplanet.com/img/2006/belkinn1/08.jpg

  If so, you should return to the utility Services and 'Stop' the automatic configuration service.  If you want to use WZC instead of the Belkin utility, see http://en-us-support.belkin.com/app/answers/detail/a_id/40/related/1

  I'm not familiar with the Belkin Wireless networking utility, but many wifi manufacturer utilities can be used to turn your wifi on and off, then maybe your was off (the adapter on your computer - not the router).  If you identify the model of the card you have in your main computer, I'll see if I can find the manual on the Belkin website and maybe give you a little more information.

• When a computer XP starts, the following errors occur. Can't find Mac addresses, can't find DHCP at startup. PC is not connected to a network. Why would it gives this error at startup.

  When a computer XP starts, the following errors occur. Can't find Mac addresses, can't find DHCP at startup. PC is not connected to a network.

  Why would it gives this error at startup?

  It is not a Windows problem, it happens very early in the boot process until Windows is still a part of the image.  Your computer is configured for a remote network via PXE boot and there is no this PXE server so that you get this error message.  With PXE network boot, you can start a computer without him having a hard drive, the operating system resides on another machine on the network.  When the BIOS does not find the PXE server it gives you the error message, and then it proceeds to the next start equipment, which is probably your local hard drive.  Go into the BIOS and disable the PXE boot option or move it to the bottom of the boot order so that the hard drive is set as the primary boot device.

  John

• I tried to send an email and got the following message: an unknown error has occurred error number: 0x800CCC6F.

  Transaction failed.  Unable to send message. Possibility of abuse

  I tried to send an email and got the following message: an unknown error has occurred. Are subject: Hello from the UK', account: 'Martin', server: 'mail.btinternet.com', Protocol: SMTP, server response: 554 Transaction failed: cannot send the message due to the possibility of abuse. Please visit http://postmaster.yahoo.com/abuse_smtp.html for more information ', Port: 25, secure (SSL): no, Server error: 554, error number: 0x800CCC6F please can you advise what could be the problem?

  Hello

   
   
  1. what web browser do you use?   If you use Internet Explorer, what version you have?
  2. you use Yahoo mail?
  3. what anti-virus software is installed on your computer?
  
   
  "If you use Yahoo mail, I suggest you to report your request in the support forum for Yahoo mail.
  http://answers.Yahoo.com/dir/index?link=list&SID=396546091
   
  See also, !-mail-settings-for-outgoing-and-incoming-mail-servers%3F http://bt.custhelp.com/app/answers/detail/a_id/6876/~/what-are-the-bt-yahoo

• I'm running Windows SP2 of Visa and get the following message is displayed at startup: "sasnative32 file not found Autocheck ignored."

  sasnative32 not found

  I'm running Windows SP2 of Visa and get the following message is displayed at startup:

  'sasnative32 file not found that autocheck ignored. '

  I found this message in the registry and deleted but it keeps reappearing.

  It does not seem to cause operational problems, but I want to fix.  Any suggestions?

  The BootExecute key should contain autocheck autochk *. This measure of Chkdsk to run at startup.

  You have all Tune Up or optimization programs installed? It is possible, it is distributed with a different brand.

  You can determine what is written in the registry key by using the Process Monitor program

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645

  If you have not used before, there is an introduction to use it here:

  Windows Sysinternals Primer: Process Explorer, Process Monitor and more. Tech· Ed 2010 North America | Channel 9

  If the value has been restored in the register at the time wherever you can connect, you will need to use logging to start. This can significantly slow down the boot.

  You may be able to determine what is responsible for disabling the departure of items using msconfig.

  http://support.Microsoft.com/kb/929135

• I can't clear the permission and get the following error message: failed to clear approval. Please try again after some time.

  I can't clear the permission and get the following error message:

  Cannot clear permission. Please try again after some time.

  I want to be able to allow so I can transfer files to my torchlight Nook more

  Macintosh:

  1. exit the Adobe Digital Editions software.
  2. Navigate to / Users / / Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash.
     If you use 10.7, see library access hidden files. Mac OS 10.7 and later.
  3. Open Adobe Digital Editions and reauthorize.

  Windows:

  1. Close all applications.
  2. Click Start > run.
  3. Open, type regedit in the text box and press ENTER. The Registry Editor opens.
  4. In the left pane of the registry editor, locate the following registry key: HKEY_CURRENT_USER\Software\Adobe\Adept
  5. Select the key of the follower.
  6. Choose file > export.
  7. In the export registry file dialog box, select the branch selected under export range. Enter a name and location for the backup registry key, and then click Save.
  8. Right click on the key to the follower, and then choose Remove.
  9. In the dialog box confirm the key deletion, click OK.
  10. Close the registry editor.
  11. Open Adobe Digital Editions and reauthorize.

• Hi after windows 10 almost killed my laptop and I had to restore to factory settings I tried to re - install creative cloud and get the following message "WE ENCOUNTERED THE FOLLOWING PROBLEMS: INSTALLATION FAILED TO INITIALIZE program.» PLEASE DOWNLOAD A

  Hi after windows 10 almost killed my laptop and I had to restore to factory settings I tried to re - install creative cloud and get the following message "WE ENCOUNTERED THE FOLLOWING PROBLEMS: INSTALLATION FAILED TO INITIALIZE program.» Please DOWNLOAD ADOBE SUPPORT ADVISOR TO DETECT THE PROBLEM. "then I tried to download the Advisor to support that to find it is no longer available. Accept payment until this problem is solved we know how to solve this problem?

  first of all uninstall cc on your computer.

  Run the vacuum cleaner by, http://www.adobe.com/support/contact/cscleanertool.html

  Restart your computer and reinstall the cc, Download Adobe Creative Cloud apps desktop application | CC free trial Adobe

  If that translates into the same initialization error:

  start at the top and work your way down to apply applicable patches until your problem is solved.

  If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html

  If your error is:

  "Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.

  first of all, rename folder OOBE OOBE.old.

  to find the OOBE:

  Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE

  Win 32 bit OS: Program Files \Common Files\Adobe\OOBE

  Mac os: HD > library > application support of > adobe > caps

  Mac os: USER > library > application support of > adobe > OOB

  If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.

  If you use an installation dvd:

  Copy the contents of the drive in a desktop folder and install from this directory.

  If you are using a mac:

  1. try to create a new user account in Mac with administrator privileges.

  2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the

  3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.

  4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.

  5 restart the installation.

  If everything is applicable above fails, check your Setup logs:

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html

• Updated to the Mavericks and obtain the following: could not initialize Photoshop because of a program error

  Updated to the Mavericks and obtain the following: could not initialize Photoshop because of a program error

  I tried all will set them on the web that I can find is Trash the Prefs, shift when it is open and plug-ins stop, download Java Update, deleted and reinstalled

  My business is to stop can't find a fix from Apple

  Did you run the vacuum after you have uninstalled and before reinstalling?

  -http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  AND JUST FOR MAC USERS - some links 10.9.x

  the following link tells After Effects, but check YOUR permissions.

  -http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml

  -Mac 10.9.4 and OpenCL number https://forums.adobe.com/thread/1514717

  -Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922

  -more than Mac 10.9.3 https://forums.adobe.com/thread/1491469

  - and https://forums.adobe.com/thread/1507936

• I have to stop and start the database after the data cache value increases?

  Hello!

  rule of Calc is in error and indicating that the error can be caused by data cache setting small size?

  I increased the value, but it still gives the same error message. I can't stop and start the database, just clicked on apply.

  I need also to check the journal rule and computation of the application to determine the cause of the error.

  But the key is in the question in the header...

  Kind regards

  user637777

  
  

  Yes, you do.

• good night, is that what happens when you open cloud creative design I check your email and get the following email (&lt; deleted by the moderator &gt;) and let my id or enter gives me more options

  good night, is that what happens when you open cloud creative design I check your email and get the following email (< deleted by the moderator >) and let my id or enter gives me more options

  Hello

  Follow please: address error to connect to Creative Cloud Desktop, Email how to pass my e-mail? and CC has a fake email, can not change

  Kind regards

  Sheena

• bought photoshop elements several weeks ago and started the download process, but I had to stop... needed to upgrade my mac so I could continue... now it won't let me continue and download the program. What should I do to correct this?

  bought photoshop elements several weeks ago and started the download process, but I had to stop... needed to upgrade my mac so I could continue... now it won't let me continue and download the program. What should I do to correct this?

  What do you mean won't you of... What is the error message?

  kglad links in response to #1 here can help https://forums.adobe.com/thread/1930162