Complete the SQL to several databases using OEM

Similar Questions

• Error in the capture of several channels using pre-trigger

  I have problems of acquiring data with pre-trigger samples during the capture of several channels, using hardware NOR-PXI-6071E and Analog Input VIs in Labview (inheritance OR-DAQ).

  My goal is to trigger a signal, while capturing another. Unfortunately, I can't use the PFI0 for external triggering, as our cables/material have already been built, so I have to use an analog input as the trigger channel. I understand that to do this I must capture the two strings and the string I want to trigger outside must be the first string in the list.

  If I trigger and capture on the same channel (I tried 1-4) then it works very well, regardless of the number of samples before relaxation together. If I capture more than one channel (the channel of the relaxation to a first), with no pre-trigger samples, then trigger and capture both work very well. However, if I do the same thing with pre-trigger > 0 sample I get the following error:

  Error-10621 to AI control. Possible reasons:
  NOR-DAQ LV: The specified trigger signal cannot be assigned to the resource for the trigger.

  I don't have to such limitation explained in the user manual, and the forum search, I found a few other people who have had the same problem but they had no solutions. Any ideas?

  Hi Jackson,

  Unfortunately, this is a hardware limitation when you reference analog trigger via one of the lines to HAVE.

  Please see this knowledge base. Particularly the second paragraph says

  The error-10621 appears immediately when the VI running if you try to assign scans of relaxation before while scanning multiple channels and using one of the entries as your trigger channel.

  Details are explained in the third paragraph:

  Because all the entries are multiplexed before being sent for analog triggering circuit, it is possible that the trigger on the trigger channel conditions might miss while the device is multiplexing by another channel. In this case, the trigger will not be detected.

  It is explained in the E-Series user manual page 10-3.  Specifically the second paragraph of the section entitled "Analog Input Channel".

  Eric S.

• How to extract the same song, several times using different bit rates or formats and store all the digital music files in WMP 12 default on the same HDD music library

  Using Windows Media Player 12 (w/under Windows 7), "can I ripping the same song, several times, using different bitrates & and/or formats and store all the digital music files in the music library by default WMP - 12, on the same hard drive?

  1.) #1 goal: tear up the same song repeatedly, w / "different rates" as a WMA file.

  2.) #2 goal: tear up the same song repeatedly, w / "different rates" as an mp3 file.

  3.) #3 objective: NOT to each subsequent copy (version) of the song, deleted & and/or replaced by the previous version of the song [even].

  4.) question Bottom Line Up Front--> is Windows Media Player 12 (included with the Windows 7 operating system) are able to achieve '#1 objectives; #2; & #3 above?

  5.) details/example: I want to tear the piece "Maria Maria by Carlos Santana" to my laptop as a Windows Media Audio [WMA] file.  In addition, I would like to rip the song 'Maria Maria' three several times with 3 different bitrates in format WMA; and, as an MP3 file.  Therefore, my final result wished (after the extraction process), will take place the four 4 audio files split up as follows: (a) 'Maria Maria by Carlos Santana'--> Format: file WMA; Ripped @128 Kbps bitrate.  (b) ' Maria Maria by Carlos Santana'--> Format: file WMA; Ripped to the "Variable bit rate; (c) ' Maria Maria by Carlos Santana'--> Format: file WMA; Ripped commissioning "Lossless." and (d). 'Maria Maria by Carlos Santana'--> Format: MP3 file. Ripped @256 Kbps bitrate.

  6.) my preference: I do NOT want to rename the file (s). {for example, 'Maria Maria by Carlos Santana' renamed/changed for--> "Maria_Maria_by_Carlos_Santana_128kbps.wma",...} 'Maria_Maria_by_Carlos_Santana_256kbps.mp3 '; etc.}.  In addition, I am not concerned about the additional disk space that will be consumed after multiple copies of the same song with different speeds of transmission and different formats.

  7.) my experience w / Windows Media Player 10 (w / the operating system of Windows XP): using WMP - 10, my goal (s) described above is not a problem at all.  Simply insert the CD purchased by Carlos Santana, containing the song "Maria Maria"... Select the desired Format (WMA; WMA VBR; WMA Lossless; or mp3)... Select the desired flow rate (WMA... 128/160/192kbps_mp3: 128/192/256/320 kbit / s; etc.) ; and click on the "RIP" button to start the copy process on the hard disk of of Carlos Santana's "Maria Maria".  This process (w / WMP-10) would result in having the same song, copied on the hard disk, with levels of quality different "audio" (via the different bit rate settings); regardless of the format (MP3/WMA) which was chosen.

  8.) my experience w / Windows Media Player 11 (w / the operating system of Windows XP): using WMP 11, to described above of my objective (s) could not be reached e-a-s-i-l-y.  The problem with WMP - 11 - in short - which was after the desired selection "Rip settings" tab 'Options' of WMP - 11 (i.e., Format & Bit Rate) and heart-wrenching piece wanted to {'Maria Maria by Carlos Santana'} a moment later/second, WMP11 remove / would crush the previous version of the song [even].  Therefore, the program would NOT allow the user to have multiple copies of the same song on the hard drive of the PC; which obviously restricts a user to have the freedom to choose what level of quality digital audio, they prefer to listen to.

  9.) the ability to have multiple copies [at my descretion] of the same song (on my hard drive) with different bitrates and formats in my music library, is important for me because it has a direct impact on "how I enjoy MY music ', and in what form (audio quality), I choose to listen to my music.  {For example, when I exercise and listening to my camera, digital audio player (Zune), a song ('Maria Maria by Carlos Santana'), will usually be torn off at a lower rate due to the unit of capacity reduction of storage - compared to the storage capacity of notebook PCs/desktop/external hard drives PC.}  However, when I listen to my music through my home cinema or entertainment system (which contains a hard disk dedicated with a large storage capacity), I prefer to load the entertainment system with digital music files that have been ripped to WMA... with the bit being rate-setting is for the: settings "WMA Variable Bit Rate" or "WMA Lossless.

  10.) there you have it.  This is my first post in this forum.  I hope that [detailed] explanations, will be sufficient to encourage these "with knowledge & the hands on experience" using Windows Media Player 12 (as well as with WMP-10/WMP-11 respectively), by providing a [step] "How-to"... "solution to my situation.  It would be highly appreciated.  I'm looking forward-'the solution' - and relevant suggestions & and/or community feedback regarding my request for assistance.

  * Thank 'All' (that would) in advance... For your time & Assistance *.

  Certainly, you can, but I would say that they be in different folders, for your convenience as well as Windows.  You can create one for each debit/format, then you will know who is who.

  In Windows Media Player, on the toolbar, select Tools, Options, Rip, and then select the flow you want first, rip music, then change the folder (higher on the same tab) and rip again... and so on and so forth.

  When you are at home on your home theater, you can use the 320 bitrate folder, when you transfer to the Zune, you can use one of the lower bitrate files (although I personally tear it up to 320 and let the Zune reduce as he wants, even with the iPhone via iTunes, hard drive space is not really a problem here) my server has several hard drives, and I can always add more if and when space is low!

• Licenses of the impact on several databases

  Licenses of the impact on several databases

  We want to create a separate database for one of our departments, we do not want manage their calls and call volumes, in our Technical Service.

  Infra allows this, but what is the implications of the license when you do.

  Do you need a key to separate license for users on the new system or it will pick up the license on the normal system file

  and deduct the totals of this licenses when new users connect?

  Kind regards
  Christians of Merlin

  Hello

  We asked VMWare this question last year. Basically, you are allowed to install VSM systems as much as you want to test/development purposes but each live/operational system requires it's own license (from a license point of view).

  Hope that helps

  Mick

• How to compare the source of PL/SQL in two databases using a clever trick

  Hello
  Here is my scenario:
  
  We have a very large (> 50) team of developers who work on PL/SQL.
  As and as new improvements/fixes are tested successfully, DBA migrates the new source code for DEV to QA, then the PROD instance.
  
  Very often, the developers are invited to check if the source code migrated to the instance target is the right. This Yes, because we use an automated migration tools... .and sometimes DBA can make mistake in migrating the wrong version (say a beta code).
  
  So that developers are left with comparing the source manually or by using the file compare tools... a very tedious job.
  (I know not a strict discipline to keep a barrette and version will help you; but we have a lot of existing code that does not adhere to this rule)
  
  So, is it possible to do ' intelligently '... I thought of a way to get the code of HASH/HASHKEY of all lines of source code of a procedure or a pkg and then again to get the HASHCODE/HASHKEY of all codes/HASHKEYs of lines of source for a particular package. to get a unique HASHKEY for a pkg... .and then I can compare this HASHKEY of 2 bodies... and they are same, means the code is the same... Otherwise, the code is different
  
  for example
  Select custom_hashkey_prc (text) from dba_source, whose name = "MY_PKG.
  
  Thank you.
  
  Published by: DT1977 on January 19, 2009 15:31

  Using a HASH to check if the two sources are the same would be a valid way to do a quick check, although it will obviously not be to tell you where the differences are.

  In Oracle 10 g, you can use the DBMS_CRYPTO package to generate HASH values...

  http://www.psoug.org/reference/dbms_crypto.html

  We use this method to detect changes in the data where exist CLOB columns (because we cannot use set operators of SQL on CLOB).

• Database using OEM 12 c size chart

  Hi guys, I have a question, I tried to find the "database size chart", the use of historical and current space on the 12 c OEM and I could not find, on enterprise manager past editions, it used to be right there on the home screen for a target database.
  
  Where are these maps now on OEM Cloud control 12 c?
  
  I really appreciate any help you can provide.
  
  Published by: 966386 on June 5, 2013 13:58

  Hello

  Follow the navigation below:

  + 12 c Cloud Control connection.
  + Company--> reports--> publisher information reports
  + In the section 'Storage'--> click on "use of Oracle database space.
  + Select the type of report you want to see and click Create like.

  + Provide the graphics you're looking for.

  Best regards
  Vincent

• Can join us the tables of several databases in the PRD file?

  Hello
  I'm working on the POC project and try to join several databases to create a file of RPD. Lets say I have complete SH schema from Oracle and I want two or three paintings (time and products) from Sybase.
  I want to put sybase TIME and product of the tables in the Oracle SH schema and create joins in the physical layer. When I try to do, it is throughing a mistake... Am I missing something here?
  
  Is this possible?
  
  Thank you
  
  Shivaji

  You did not mention what the error!
  We can create b & w to join tables in different databases
  You must select a database table and as well as another table in the database and
  Right click > physical join > selected tables only...

  This is how to create physical joins... or else you databases and select physical joins...

  It is preferable that you mention, what is the error you get... ??

  Thank you & best regards
  Kishore Guggilla

• Import the SQL Server 2008 database to Oracle XE

  Hello
  I just installed oracle 10g Express Edition locally on my PC.
  I would now like to import a SQL Server 2008 database (structure and data).
  Is this possible? Y at - it a utility Oracle that I can use?
  
  Thank you
  M.R.

  You can use [Oracle SQL Developer | http://www.oracle.com/technology/products/database/sql_developer/index.html].

  See also: [http://download.oracle.com/docs/cd/E12151_01/doc.150e12156.pdf |] Oracle SQL Developer for MS SQL Server, Sybase and other Documentation.]

  Roberto.

  Add help.
  Published by: rober584812 on February 25, 2009 13:37

• How the value for several variables using a single guest

  Is there a way to put more than one variable with a single guest?
  for example, the value @CurrentYear and @PasteYear using just a single guest for @CurrentYear.
  
  A clue?
  
  Thank you
  
  Luke

  Using variables to repository you can set like this.
  Check this link http://gerardnico.com/wiki/dat/obiee/set_variable

  If brand pls help

• We're going to get data off autcad drawing and place it in the sql for this database we use visual studio 2010. But we are getting following error

  See the end of this message for details on the call
  just-in-time (JIT) debugging instead of this dialog box.

  Loading assemblies *.
  mscorlib
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.233 (RTMGDR.030319 - 2300)
  Code: file:///D:/Windows/Microsoft.NET/Framework64/v4.0.30319/mscorlib.dll
  ----------------------------------------
  AdApplicationFrame
  Assembly version: 0.0.0.0
  Win32 version: 3.2.23.0
  Code: file:///C:/Autodesk/AutoCAD%202012%20-%20English/AdApplicationFrame.DLL
  ----------------------------------------
  msvcm90
  Assembly version: 9.0.30729.4926
  Win32 version: 9.00.30729.4926
  Code: file:///D:/Windows/WinSxS/amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.4926_none_08e1a05ba83fe554/msvcm90.dll
  ----------------------------------------
  Acdbmgd
  Assembly version: 18.2.0.0
  Win32 version: 18.2.51.0.0
  Code: file:///C:/Autodesk/AutoCAD%202012%20-%20English/AcdbMgd.DLL
  ----------------------------------------
  System
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.233 built by: RTMGDR
  Code: file:///D:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------
  AdWindows
  Assembly version: 3.2.23.0
  Win32 version: 3.2.23.0
  Code: file:///C:/Autodesk/AutoCAD%202012%20-%20English/AdWindows.DLL
  ----------------------------------------
  PresentationFramework
  Assembly version: 4.0.0.0
  Win32 version: 4.0.30319.233
  Code: file:///D:/Windows/Microsoft.Net/assembly/GAC_MSIL/PresentationFramework/v4.0_4.0.0.0__31bf3856ad364e35/PresentationFramework.dll
  ----------------------------------------
  WindowsBase
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.233 built by: RTMGDR
  Code: file:///D:/Windows/Microsoft.Net/assembly/GAC_MSIL/WindowsBase/v4.0_4.0.0.0__31bf3856ad364e35/WindowsBase.dll
  ----------------------------------------
  PresentationCore
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.233 built by: RTMGDR
  Code: file:///D:/Windows/Microsoft.Net/assembly/GAC_64/PresentationCore/v4.0_4.0.0.0__31bf3856ad364e35/PresentationCore.dll
  ----------------------------------------
  System.Xaml
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.1 built by: RTMRel
  Code: file:///D:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xaml/v4.0_4.0.0.0__b77a5c561934e089/System.Xaml.dll
  ----------------------------------------
  System.Core
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.233 built by: RTMGDR
  Code: file:///D:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
  ----------------------------------------
  System.Xml
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.233 built by: RTMGDR
  Code: file:///D:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
  ----------------------------------------
  PresentationFramework.Aero
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.1 built by: RTMRel
  Code: file:///D:/Windows/Microsoft.Net/assembly/GAC_MSIL/PresentationFramework.Aero/v4.0_4.0.0.0__31bf3856ad364e35/PresentationFramework.Aero.dll
  ----------------------------------------
  System.Drawing
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.1 built by: RTMRel
  Code: file:///D:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
  ----------------------------------------
  Acmgd
  Assembly version: 18.2.0.0
  Win32 version: 18.2.51.0.0
  Code: file:///C:/Autodesk/AutoCAD%202012%20-%20English/Acmgd.DLL
  ----------------------------------------
  System.Configuration
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.1 (RTMRel.030319 - 0100)
  Code: file:///D:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
  ----------------------------------------
  AcWindows
  Assembly version: 18.2.0.0
  Win32 version: 18.2.51.0.0
  Code: file:///C:/Autodesk/AutoCAD%202012%20-%20English/AcWindows.DLL
  ----------------------------------------
  AcCui
  Assembly version: 18.2.0.0
  Win32 version: 18.2.51.0.0
  Code: file:///C:/Autodesk/AutoCAD%202012%20-%20English/AcCui.DLL
  ----------------------------------------
  WindowsFormsIntegration
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.1 built by: RTMRel
  Code: file:///D:/Windows/Microsoft.Net/assembly/GAC_MSIL/WindowsFormsIntegration/v4.0_4.0.0.0__31bf3856ad364e35/WindowsFormsIntegration.dll
  ----------------------------------------
  AcWindows.resources
  Assembly version: 18.2.0.0
  Win32 version: 18.2.51.0.0
  Code: file:///C:/Autodesk/AutoCAD%202012%20-%20English/en-US/AcWindows.resources.DLL
  ----------------------------------------
  ContextualTabSelectorRules
  Assembly version: 0.0.0.0
  Win32 version: 18.2.51.0.0
  Code: file:///C:/Autodesk/AutoCAD%202012%20-%20English/AcWindows.dll
  ----------------------------------------
  System.Windows.Forms
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.1 built by: RTMRel
  Code: file:///D:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
  ----------------------------------------
  ManagedMC3
  Assembly version: 5.8.0.0
  Win32 version: 5.8.0.0
  Code: file:///C:/Autodesk/AutoCAD%202012%20-%20English/ManagedMC3.DLL
  ----------------------------------------
  UIAutomationProvider
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.1 built by: RTMRel
  Code: file:///D:/Windows/Microsoft.Net/assembly/GAC_MSIL/UIAutomationProvider/v4.0_4.0.0.0__31bf3856ad364e35/UIAutomationProvider.dll
  ----------------------------------------
  AcWelcomeScreen
  Assembly version: 18.2.0.0
  Win32 version: 18.2.51.0.0
  Code: file:///C:/Autodesk/AutoCAD%202012%20-%20English/AcWelcomeScreen.DLL
  ----------------------------------------
  AcLayer
  Assembly version: 18.2.0.0
  Win32 version: 18.2.51.0.0
  Code: file:///C:/Autodesk/AutoCAD%202012%20-%20English/AcLayer.DLL
  ----------------------------------------
  AcLayer.resources
  Assembly version: 18.2.0.0
  Win32 version: 18.2.51.0.0
  Code: file:///C:/Autodesk/AutoCAD%202012%20-%20English/en-US/AcLayer.resources.DLL
  ----------------------------------------
  AcButterflyExt
  Assembly version: 1.0.0.23
  Win32 version: 1.0.0.23
  Code: file:///C:/Autodesk/AutoCAD%202012%20-%20English/AcButterflyExt.DLL
  ----------------------------------------
  AcButterflyExt.resources
  Assembly version: 1.0.0.23
  Win32 version: 1.0.0.23
  Code: file:///C:/Autodesk/AutoCAD%202012%20-%20English/en-US/AcButterflyExt.resources.DLL
  ----------------------------------------
  AcDialogToolTips
  Assembly version: 18.2.0.0
  Win32 version: 18.2.51.0.0
  Code: file:///C:/Autodesk/AutoCAD%202012%20-%20English/AcDialogToolTips.DLL
  ----------------------------------------
  AcDialogToolTips.resources
  Assembly version: 18.2.0.0
  Win32 version: 18.2.51.0.0
  Code: file:///C:/Autodesk/AutoCAD%202012%20-%20English/en-US/AcDialogToolTips.resources.DLL
  ----------------------------------------
  Accessibility
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.1 built by: RTMRel
  Code: file:///D:/Windows/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
  ----------------------------------------
  BomEXPORT
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///C:/BomEXPORT/iBOM-AutoCAD-SOURCE/BomEXPORT/bin/Debug/BomEXPORT.dll
  ----------------------------------------
  AcCustomize
  Assembly version: 18.2.0.0
  Win32 version: 18.2.51.0.0
  Code: file:///C:/Autodesk/AutoCAD%202012%20-%20English/AcCustomize.DLL
  ----------------------------------------
  AcCustomize.resources
  Assembly version: 18.2.0.0
  Win32 version: 18.2.51.0.0
  Code: file:///C:/Autodesk/AutoCAD%202012%20-%20English/en-US/AcCustomize.resources.DLL
  ----------------------------------------
  AcMrUi
  Assembly version: 18.2.0.0
  Win32 version: 18.2.51.0.0
  Code: file:///C:/Autodesk/AutoCAD%202012%20-%20English/AcMrUI.DLL
  ----------------------------------------
  AcMrUi.resources
  Assembly version: 18.2.0.0
  Win32 version: 18.2.51.0.0
  Code: file:///C:/Autodesk/AutoCAD%202012%20-%20English/en-US/AcMrUi.resources.DLL
  ----------------------------------------
  CCRM
  Assembly version: 18.2.0.0
  Win32 version: 18.2.51.0.0
  Code: file:///C:/Autodesk/AutoCAD%202012%20-%20English/AcMr.DLL
  ----------------------------------------
  System.Runtime.Serialization
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.1 (RTMRel.030319 - 0100)
  Code: file:///D:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Serialization/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Serialization.dll
  ----------------------------------------
  PresentationFramework.Luna
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.1 built by: RTMRel
  Code: file:///D:/Windows/Microsoft.Net/assembly/GAC_MSIL/PresentationFramework.Luna/v4.0_4.0.0.0__31bf3856ad364e35/PresentationFramework.Luna.dll
  ----------------------------------------
  ADODB
  Assembly version: 7.0.3300.0
  Win32 version: 7.10.6070
  Code: file:///D:/Windows/assembly/GAC/ADODB/7.0.3300.0__b03f5f7f11d50a3a/ADODB.dll
  ----------------------------------------
  iBOM-AutoCAD
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///C:/BomEXPORT/iBOM-AutoCAD-SOURCE/BomEXPORT/bin/Debug/iBOM-AutoCAD.dll
  ----------------------------------------

  JIT debugging *.
  To enable just-in-time (JIT) debugging, the .config file for this
  application or computer (machine.config) must have the
  jitDebugging value set in the system.windows.forms section.
  The application must also be compiled with debugging
  permit.

  For example:

  
     
  

  When JIT debugging is enabled, an unhandled exception
  will be sent to the JIT debugger registered on the computer
  rather than be handled by this dialog box.

  Hello

  The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you:

  http://social.msdn.Microsoft.com/forums/en/category/VisualStudio

• Unable to connect to the SQL 2005 Express database

  I'm new to Flex and I try to use the application for creating the database wizard and I am not able to connect to one of my servers MS SQL or PostgreSQL. I get this error message:
  
  java.sql.SQLException: unknown server host name "10.40.213.80\SQLEXPRESS".
  to net.sourceforge.jtds.jdbc.ConnectionJDBC2. < init > (ConnectionJDBC2.java:364)
  to net.sourceforge.jtds.jdbc.ConnectionJDBC3. < init > (ConnectionJDBC3.java:50)
  at net.sourceforge.jtds.jdbc.Driver.connect(Driver.java:178)
  to org.eclipse.datatools.connectivity.db.generic.JDBCConnection.createConnection (JDBCConnect ion.java:87)
  at org.eclipse.datatools.connectivity.DriverConnectionBase.internalCreateConnection (DriverCo nnectionBase.java:104)
  at org.eclipse.datatools.connectivity.DriverConnectionBase.open (DriverConnectionBase.java:53)
  to org.eclipse.datatools.connectivity.db.generic.JDBCConnectionFactory.createConnection (JDBC ConnectionFactory.java:52)
  to org.eclipse.datatools.connectivity.internal.ConnectionFactoryProvider.createConnection (Co nnectionFactoryProvider.java:77)
  at org.eclipse.datatools.connectivity.internal.ConnectionProfile.createConnection (Link Profile .java: 354)
  to com.adobe.datatools.derived.wizards.BaseConnectionProfilePage.testConnectionSimple (BaseCo nnectionProfilePage.java:70)
  at com.adobe.datatools.derived.wizards.BaseConnectionProfilePage.testConnection (BaseConnecti onProfilePage.java:51)
  to org.eclipse.datatools.connectivity.ui.wizards.ConnectionProfileDetailsPage$ 1.widgetSelect ed(ConnectionProfileDetailsPage.java:85)
  at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:227)
  at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
  at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:938)
  at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3682)
  at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3293)
  at org.eclipse.jface.window.Window.runEventLoop(Window.java:820)
  at org.eclipse.jface.window.Window.open(Window.java:796)
  to com.adobe.flexbuilder.dbwizard.ui.DbWizard$ 8.widgetSelected(DbWizard.java:598)
  at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:227)
  at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
  at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:938)
  at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3682)
  at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3293)
  at org.eclipse.jface.window.Window.runEventLoop(Window.java:820)
  at org.eclipse.jface.window.Window.open(Window.java:796)
  at com.adobe.flexbuilder.dbwizard.actions.DBWizardAction.run(DBWizardAction.java:69)
  at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:256)
  at org.eclipse.ui.internal.WWinPluginAction.runWithEvent(WWinPluginAction.java:229)
  at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection (ActionContributionI tem.java:546)
  to org.eclipse.jface.action.ActionContributionItem.access$ 2 (ActionContributionItem.java:490)
  to org.eclipse.jface.action.ActionContributionItem$ 5.handleEvent (ActionContributionItem.java:402)
  at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
  at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:938)
  at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3682)
  at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3293)
  at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2389)
  at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2353)
  to org.eclipse.ui.internal.Workbench.access$ 4 (Workbench.java:2219)
  to org.eclipse.ui.internal.Workbench$ 4.run(Workbench.java:466)
  at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:289)
  at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:461)
  at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
  at com.adobe.flexbuilder.standalone.FlexBuilderApplication.start (FlexBuilderApplication.java:112)
  at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:169)
  at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication (EclipseAppLau ncher.java:106)
  at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start (EclipseAppLauncher.jav one: 76)
  at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:363)
  at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:176)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)
  at java.lang.reflect.Method.invoke (unknown Source)
  at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:508)
  at org.eclipse.equinox.launcher.Main.basicRun(Main.java:447)
  at org.eclipse.equinox.launcher.Main.run(Main.java:1173)
  at org.eclipse.equinox.launcher.Main.main(Main.java:1148)
  Caused by: java.net.UnknownHostException: 10.40.213.80\SQLEXPRESS
  at java.net.PlainSocketImpl.connect (unknown Source)
  at java.net.SocksSocketImpl.connect (unknown Source)
  at java.net.Socket.connect (unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)
  at java.lang.reflect.Method.invoke (unknown Source)
  at net.sourceforge.jtds.jdbc.SharedSocket.createSocketForJDBC3(SharedSocket.java:289)
  to net.sourceforge.jtds.jdbc.SharedSocket. < init > (SharedSocket.java:250)
  to net.sourceforge.jtds.jdbc.ConnectionJDBC2. < init > (ConnectionJDBC2.java:297)
  ... more than 57
  I activated local and remote connections on my server, I can connect to them using connections DSN on Windows and other applications of web development such as MS visual studio. Y at - it requires no special configuration as flex?

  Well I uninstalled my SQLEXPRESS and just installed an instance of SQL 2005 standard and enabled TCP/IP connections and ta - da! Don't know if there is something else in SQLEXPRESS which must be activated but it works not now.

  Thank you!

• SQL (body of function from PL/SQL returning the SQL) query when you use to_char

  We are trying to build a page of Type SQL Query report (body of function from PL/SQL returning SQL query).
  our request is simple, to extract the month of the column recording_date.
  
  declare
  l_query varchar2 (1000);
  Start
  l_query: = 'select to_char (recording_date, 'MM') of re_productive;
  Return l_query;
  end;
  
  but we would like the following for this query problem
  
  Function returning SQL query: query cannot be parsed in the generator. If you believe that your query is syntactically correct, check the box of generic columns below the source of the region without analysis.
  (ORA-06550: line 4, column 42: PLS-00103: encountered the symbol "MY" what awaits one of the following values:.) (* @ % & = - +; <>/ at is mod remains not rem <>or! = or ~ = > = < = <>and or as between | multiset Member SUBMULTISET_ the symbol ".") was inserted before 'MY' to continue.)
  
  Notes:
  1 - the request is correct and it has been tested under sqlplus and toad.
  2. we tried option use generic name (analysis of query runtime only) column, but we get the same problem.
  
  
  any quick help please.

  Hello

  You have not escaped your quote in the string. Try this...

  DECLARE
  l_query VARCHAR2(32767);
  
  BEGIN
  
  l_query:= 'select to_char(recording_date,''MM'') from re_productive';
  
  RETURN l_query;
  
  END;
  

  See you soon

  Ben

• How to find instructions to duplicate SQL using OEM 12 c

  Anyone know how to find the SQL statements in dual-use OEM 12 c cloud control?

  I found this:

  target database open--> performance--> go down with the page (duplicate SQL)

• See the SQL queries used

  Hello.
  
  I use gR 10, 3 of the UMC.
  
  Is it possible to see all the sql queries that are used by the Complutense University of Madrid.
  
  In my case, I've defined a query in Sitestudio, which looks like this

  dDocType <matches> 'someType'

  I want to know the SQL of the query.
  
  Thanks for all the answers
  Brahim

  Hello

  Navigate to Administration - System Information Audit - tracing of the Sections - active Sections.

  Put systemdatabase, searchquery and enable detailed full tracing.

  This will give you the sql queries running for all actions on the Complutense University of MADRID.

  Systemdatabase gives all of the query sent to DB by UCM.

  SearchQuery gives the query when the clause are formed during a search.

  Thank you
  Srinath

• How to get the sql query result?

  Hello

  Currently I use LV2012 to connect to an Oracle database server. After the Oracle Express and Oracle ODBC driver facilities/settings made.

  I managed to use the SQL command to query the data through my command prompt window.

  Now the problem is, how to do the same task in Labview using database connectivity tools?

  I have build a VI to query as being attached, but I have no idea of what range to use to get the result of the query.

  Please help me ~ ~

  Here is a piece of code that I use to test the SQL commands, you can use the part that retrieves the results of sql.

  It is also possible to get the rear column headers, but it's for the next lesson!

  ;-)