Error in the capture of several channels using pre-trigger

Similar Questions

• How to extract the same song, several times using different bit rates or formats and store all the digital music files in WMP 12 default on the same HDD music library

  Using Windows Media Player 12 (w/under Windows 7), "can I ripping the same song, several times, using different bitrates & and/or formats and store all the digital music files in the music library by default WMP - 12, on the same hard drive?

  1.) #1 goal: tear up the same song repeatedly, w / "different rates" as a WMA file.

  2.) #2 goal: tear up the same song repeatedly, w / "different rates" as an mp3 file.

  3.) #3 objective: NOT to each subsequent copy (version) of the song, deleted & and/or replaced by the previous version of the song [even].

  4.) question Bottom Line Up Front--> is Windows Media Player 12 (included with the Windows 7 operating system) are able to achieve '#1 objectives; #2; & #3 above?

  5.) details/example: I want to tear the piece "Maria Maria by Carlos Santana" to my laptop as a Windows Media Audio [WMA] file.  In addition, I would like to rip the song 'Maria Maria' three several times with 3 different bitrates in format WMA; and, as an MP3 file.  Therefore, my final result wished (after the extraction process), will take place the four 4 audio files split up as follows: (a) 'Maria Maria by Carlos Santana'--> Format: file WMA; Ripped @128 Kbps bitrate.  (b) ' Maria Maria by Carlos Santana'--> Format: file WMA; Ripped to the "Variable bit rate; (c) ' Maria Maria by Carlos Santana'--> Format: file WMA; Ripped commissioning "Lossless." and (d). 'Maria Maria by Carlos Santana'--> Format: MP3 file. Ripped @256 Kbps bitrate.

  6.) my preference: I do NOT want to rename the file (s). {for example, 'Maria Maria by Carlos Santana' renamed/changed for--> "Maria_Maria_by_Carlos_Santana_128kbps.wma",...} 'Maria_Maria_by_Carlos_Santana_256kbps.mp3 '; etc.}.  In addition, I am not concerned about the additional disk space that will be consumed after multiple copies of the same song with different speeds of transmission and different formats.

  7.) my experience w / Windows Media Player 10 (w / the operating system of Windows XP): using WMP - 10, my goal (s) described above is not a problem at all.  Simply insert the CD purchased by Carlos Santana, containing the song "Maria Maria"... Select the desired Format (WMA; WMA VBR; WMA Lossless; or mp3)... Select the desired flow rate (WMA... 128/160/192kbps_mp3: 128/192/256/320 kbit / s; etc.) ; and click on the "RIP" button to start the copy process on the hard disk of of Carlos Santana's "Maria Maria".  This process (w / WMP-10) would result in having the same song, copied on the hard disk, with levels of quality different "audio" (via the different bit rate settings); regardless of the format (MP3/WMA) which was chosen.

  8.) my experience w / Windows Media Player 11 (w / the operating system of Windows XP): using WMP 11, to described above of my objective (s) could not be reached e-a-s-i-l-y.  The problem with WMP - 11 - in short - which was after the desired selection "Rip settings" tab 'Options' of WMP - 11 (i.e., Format & Bit Rate) and heart-wrenching piece wanted to {'Maria Maria by Carlos Santana'} a moment later/second, WMP11 remove / would crush the previous version of the song [even].  Therefore, the program would NOT allow the user to have multiple copies of the same song on the hard drive of the PC; which obviously restricts a user to have the freedom to choose what level of quality digital audio, they prefer to listen to.

  9.) the ability to have multiple copies [at my descretion] of the same song (on my hard drive) with different bitrates and formats in my music library, is important for me because it has a direct impact on "how I enjoy MY music ', and in what form (audio quality), I choose to listen to my music.  {For example, when I exercise and listening to my camera, digital audio player (Zune), a song ('Maria Maria by Carlos Santana'), will usually be torn off at a lower rate due to the unit of capacity reduction of storage - compared to the storage capacity of notebook PCs/desktop/external hard drives PC.}  However, when I listen to my music through my home cinema or entertainment system (which contains a hard disk dedicated with a large storage capacity), I prefer to load the entertainment system with digital music files that have been ripped to WMA... with the bit being rate-setting is for the: settings "WMA Variable Bit Rate" or "WMA Lossless.

  10.) there you have it.  This is my first post in this forum.  I hope that [detailed] explanations, will be sufficient to encourage these "with knowledge & the hands on experience" using Windows Media Player 12 (as well as with WMP-10/WMP-11 respectively), by providing a [step] "How-to"... "solution to my situation.  It would be highly appreciated.  I'm looking forward-'the solution' - and relevant suggestions & and/or community feedback regarding my request for assistance.

  * Thank 'All' (that would) in advance... For your time & Assistance *.

  Certainly, you can, but I would say that they be in different folders, for your convenience as well as Windows.  You can create one for each debit/format, then you will know who is who.

  In Windows Media Player, on the toolbar, select Tools, Options, Rip, and then select the flow you want first, rip music, then change the folder (higher on the same tab) and rip again... and so on and so forth.

  When you are at home on your home theater, you can use the 320 bitrate folder, when you transfer to the Zune, you can use one of the lower bitrate files (although I personally tear it up to 320 and let the Zune reduce as he wants, even with the iPhone via iTunes, hard drive space is not really a problem here) my server has several hard drives, and I can always add more if and when space is low!

• Does anyone know how to change the date of the capture of several images with LR CC?

  Does anyone know how to change the date of the capture of several images in LR CC

  Hi Jguy,

  Please see this thread time changing capture several Images on

  Let us know if this helps

  Kind regards

  Assani

• How to read voltage on several channels using the 6255\SCB-68

  Hi all

  I have been able to get the following code to compile, run and display the data as expected. When you read the tension (CSR) on Dev0/ai65

  ... Instruments\NI-national DAQ\Examples\DAQmx ANSI C\Analog In\Measure Voltage\Cont Acq - Int Clk\ContAcq - IntClk.c

  * I think I'm using CSR, but I have no idea since I don't see an argument to specify

  I'm reading two different data points:

  1 discovered (CSR) tension on Dev0/ai65

  2 show the (differential) voltage difference between Dev0/ai17 and Dev0/ai25

  Can someone point me to an example (or a web link) where two different data points are read.

  * edit - I am filling this task using C++

  Thank you

  Chad

  This code is a start, and it works

  
  
  using namespace std;
  
  
  
  
  
  
  
  
  
  using namespace std;
  
  #define DAQmxErrChk (functionCall) if (DAQmxFailed (error = (functionCall))) goto error; on the other
  int main (void)
  
  {
  <>
  
  	< "\t="" starting="" the="" ni="" daqmx="" data="">
  
  	<>
  int loop;
  < 3;="">
  
  	{
  
  		Int32       = 0 error;
  
  		TaskHandle  taskHandle1 = 0;
  
  		TaskHandle  taskHandle2 = 0;
  
  		Int32       read1.
  
  		Int32       Read 2;
  
  		float64     data1 [1000];
  
  		float64     data2 [1000];
  
  		tank        errBuff [2048] = {'\0'};
  Channel settings and the schedule of the analog voltage DAQmx
  
  		DAQmxErrChk (DAQmxCreateTask ("task1", & taskHandle1));
  
  		DAQmxErrChk (DAQmxCreateAIVoltageChan (taskHandle1, "ai25/Dev1", "", DAQmx_Val_Cfg_Default,-10,0, 10.0, DAQmx_Val_Volts, NULL));
  
  		DAQmxErrChk (DAQmxCfgSampClkTiming (taskHandle1, "", 10000.0, DAQmx_Val_Rising, DAQmx_Val_FiniteSamps, 1000));
  DAQmxErrChk (DAQmxCreateTask ("task2", & taskHandle2));
  
  		DAQmxErrChk (DAQmxCreateAIVoltageChan (taskHandle2, "Dev1/ai17", "", DAQmx_Val_Cfg_Default,-10,0, 10.0, DAQmx_Val_Volts, NULL));
  
  		DAQmxErrChk (DAQmxCfgSampClkTiming (taskHandle2, "", 10000.0, DAQmx_Val_Rising, DAQmx_Val_FiniteSamps, 1000));
  Starting code DAQmx
  
  		DAQmxErrChk (DAQmxStartTask (taskHandle1));
  Reading DAQmx code
  
  		DAQmxErrChk (DAQmxReadAnalogF64 (taskHandle1, 1000, 10.0, DAQmx_Val_GroupByChannel, data1, 1000, & read1, NULL));
  
  		< read1;="">
  
  			< data1[i]="">< "="">
  
  		<>
  DAQmxStopTask (taskHandle1);
  
  		DAQmxClearTask (taskHandle1);
  Starting code DAQmx
  
  		DAQmxErrChk (DAQmxStartTask (taskHandle2));
  Reading DAQmx code
  
  		DAQmxErrChk (DAQmxReadAnalogF64 (taskHandle2, 1000, 10.0, DAQmx_Val_GroupByChannel, data2, 1000, & read2, NULL));
  
  		< read2;="">
  
  			< data2[i]="">< "="">
  
  		<>
  
  		DAQmxStopTask (taskHandle2);
  
  		DAQmxClearTask (taskHandle2);
  Stop and clear spots
  
  	Error:
  
  		If (DAQmxFailed (error))
  
  			DAQmxGetExtendedErrorInfo (errBuff, 2048);
  
  		If (taskHandle1! = 0)  {}
  
  			DAQmxStopTask (taskHandle1);
  
  			DAQmxStopTask (taskHandle2);
  
  			DAQmxClearTask (taskHandle1);
  
  			DAQmxClearTask (taskHandle2);
  
  		}
  If (DAQmxFailed (error))
  
  			printf ("DAQmx error: %s\n", errBuff);
  }
  
  	end of loop
  <>
  
  	< "\t="" stopping="" the="" ni="" daqmx="" data="">
  
  	<>
  return 0;
  }

• Measurement error of the County of edge by using the external sample clock

  Hello

  I'm trying to measure the number of edges (rising) on a square wave at 5 kHz with a generator function on a device of the NI PCIe-6363. I configured a channel of County of front edge of counter at the entrance of the PFI8 device. I use an external sample clock that is provided by the output of the meter of a NI USB-6211 housing channel. If I acquire for 10secs then ideally I would expect to see a total of 50000 edges measured on the meter inlet channel. However, my reading is anywhere between 49900 and 50000.

  When I use the internal clock of time base to measure the edges, the measure is accurate and almost always exactly 50000. I understand that when you use the external sample clock, the precision of the measurements is subject to noise level of the clock signal. However, I checked the clock signal is stable and not very noisy. Any reason why there is an error of measurement and how tolerance should I expect when using an external sample clock compared to when you use the internal time base clock?

  Also, what is best clock Frequency (with respect to the frequency of the input signal) when using an external clock?

  Thank you

  Noblet

  Hi all

  Thanks for all your sugggestions. I was using an input signal with a function generator which had a range of 8V. It turns out that the reduction of the amplitude to 5V solves the problem. I was able to get accurate numbers with the 6211 external clock.

  Thank you

  Noblet

• Application not found error-choose the program you want to use to open this file

  Soon all the world.

  I really hope that someone will post a reply to my question as soon as possible. I will try to be as descriptive as I could possibly, in order to solve my problems.

  The main problem is that I can't open some, if all the program files, applications on my windows 7, 32-bit laptop. I'm constantnly get application not found error, showing in a small window address, I was trying to do. Whenever I want to open a program, like the Adobe reader, word of microsoft, excel, mozilla firefox, google chrome - basically everthing, a window opens and is telling me this: choose the program you want to use to open this file: file: acad.exe... and recommend me acrobat from adobe program, any program I was trying to enter (in this case autoCAD).

  Cannot open cmd, when I go to system recovery, it says: System Restore could not start. I normally post records in: C and: D sheet music, play music, watch videos and see photos. I found a "hole" not being able to go to the internet via a browser. I discovered it when I went to an online help in some of the trobleshoots. It would open tab in google chrome by itself and then on it, I can browse the internet normally, but only through the said track.

  Currently, the microsoft security essentials performs a custom analysis (: C and: D), because I suspect it is a malware, or some kind of virus. It happened when I tried to download a program from CAD Solidworks 2012 via a site that I'm not sure I'm allowed to mention, that I don't want. Unless it's okay with you :) It begins with a letter t. By the way, I noticed that my: partition D has accumulated 10 GB + more in the space of a few days, because I remember two weeks ago I had close to 70 GB of free space, now it's about 56.3 GB. Curious, because I know that I did nothing so great in this period. Maybe I need to tell you that I get this window, from time to time, when I browse the internet (I never visit suspicious sites, or at least I don't me remember more I visited one in a very long time, like 4-5 months):

  [url=http://canadaalltax.com/z/?f=pjrKrjr7vTw8qi5FrTxXrjr4qdgHqjrHqE%3D%3D&eid=727&hid=15769845847361013151&pid=0&ch=666&rf=http%3A%2F%2Fwww.boldride.com%2Fbrand%2Fwilliams-racing&s=px.pluginh&r=0.13960388134319002]http://canadaalltax.com/z/?f=pjrKrjr7vTw8qi5FrTxXrjr4qdgHqjrHqE%3D%3D&eid=727&hid=15769845847361013151&pid=0&ch=666&rf=http%3A%2F%2Fwww.boldride.com%2Fbrand%2Fwilliams-racing&s=px.pluginh&r=0.13960388134319002[/url]

  I found this in my story, be very careful what you do with this link, I don't want that take you anything ;)

  That's on my side, please ask anything and everything, I'll visit this page when I can.

  Good bye!

  P.S. forgot to mention that when I download a program (mozilla Firefox), I can not run it due to: Application not found. I hope I found the right place for it.

  Original title: Windows 7 - Application not found. A big problem or easy-peasy?

  Hello

  Thanks for posting your query in Microsoft Community.

  1. What is the complete error message you get when opening a file?
  2. What happens when you try to open the command prompt?
  3. What happens when you try to access the internet by using Internet Explorer?
  4. You did changes to the computer before the show?

  According to the description of problem errors you get "application not found error" and "choose the program you want to use to open this file" and not being is not able to do system restore, it seems that some windows file is corrupted. I also suggest you to post back the results of analysis.

  I would suggest trying the following methods and check if this is useful:

  Method 1:  Run SFC scan and check for corrupted Windows files and violations of integrity.

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833

  Method 2:

  For any question, where his prompting you to select the default program
  Try to set the default values for the program
  Change the programs that Windows uses by default
  http://Windows.Microsoft.com/en-in/Windows/change-default-programs#1TC=Windows-7

  For any question, where you are not able to download and install firefox, download the file and save it and then try to install firefox.

  I hope this helps. Please let us know the results. Feel free to write us again for any help.

• Cannot save edited image. Error message: "the file is already in use or left open.

  I tried to save JPEG images after making a few changes to Photoshop CS4. For each file, I get the message "cannot save (file name) because the file is already in use or left open." I checked my apps and nothing is running would be to use the image. Can someone look over my EtreCheck and tell me if there is something current funny? I'm working on hundreds of images, so just change the name is slow and heavy work around. The problem seems to have started after update 10.11.

  Thank you!

  Description of the problem:

  Photoshop will not save modified files

  EtreCheck version: 2.1.8 (121)

  Report generated on May 30, 2016 to 19:09:40 PDT

  Download EtreCheck from http://etresoft.com/etrecheck

  Click on the links [click for support] to help with non-Apple products.

  Click on the links [click for more details] for more information on this line.

  Material Information: ℹ️

  iMac (27 inch, mid 2011) (data sheet)

  iMac - model: iMac12, 2

  1 3.4 GHz Intel Core i7 CPU: 4 strands

  12 GB of RAM expandable

  BANK 0/DIMM0

  OK 2 GB DDR3 1333 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1333 MHz

  0/DIMM1 BANK

  OK 4 GB DDR3 1333 MHz

  BANK 1/DIMM1

  OK 4 GB DDR3 1333 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Video information: ℹ️

  AMD Radeon HD 6970M - VRAM: 1024 MB

  iMac, 1920 x 1080

  System software: ℹ️

  OS X 10.11.5 (15F34) - time since started: 3 days 10:0:4

  Disc information: ℹ️

  Hitachi HDS722020ALA330 disk0: (2 TB)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 2,00 (1.46 free) tuberculosis

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  OPTIARC DVD RW AD - 5680H

  USB information: ℹ️

  Logitech USB receiver

  Computer, Inc. Apple IR receiver.

  Card reader Apple

  Apple Inc. FaceTime HD camera (built-in)

  Seiko Instruments Inc. SII Smart Label Printer 450

  EPSON EPSON scanner

  Nikon LS-5000 ED

  Seagate FreeAgent 1 TB FW

  EFI (disk1s1) < not mounted >: 210 MB

  back to the top by car (disk1s2) / Volumes/backup drive: 999,86 (Go 280,90 free)

  EFI (disk1s1) < not mounted >: 210 MB

  back to the top by car (disk1s2) / Volumes/backup drive: 999,86 (Go 280,90 free)

  Western Digital my book 1140 3 TB

  disk2s1 (disk2s1) < not mounted >: 210 MB

  Corning (disk2s2) / Volumes/Corning: 3,00 TB (790,67 GB free)

  Apple Inc. BRCM2046 hub.

  Apple Inc. Bluetooth USB host controller.

  disk2s1 (disk2s1) < not mounted >: 210 MB

  Corning (disk2s2) / Volumes/Corning: 3,00 TB (790,67 GB free)

  disk2s1 (disk2s1) < not mounted >: 210 MB

  Corning (disk2s2) / Volumes/Corning: 3,00 TB (790,67 GB free)

  Lightning information: ℹ️

  Apple Inc. Thunderbolt_bus.

  Guardian: ℹ️

  Any where

  Kernel Extensions: ℹ️

  / Applications/Toast 8 Titanium/Toast Titanium.app

  [no charge] com.roxio.BluRaySupport (1.1.3) [click for support]

  [no charge] com.roxio.TDIXController (1.6) [click for support]

  / Library/Application Support/Avast/components/fileshield/not signed

  [loading] com.avast.AvastFileShield (3.0.0 - 10.10 SDK) [click for support]

  / Library/Application Support/Avast/components/proxy/not signed

  [loading] com.avast.PacketForwarder (2.1 - 10.10 SDK) [click for support]

  / Library/Extensions

  [no charge] com.LogMeIn.hamachi (1.0) [click for support]

  / System/Library/Extensions

  [loading] com.logmein.driver.LogMeInSoundDriver (1.0.3 - 10.5 SDK) [click for support]

  [no charge] com.seagate.driver.PowSecDriverCore (5.1.1) [click to support]

  com.siibusinessproducts.driver.SLP [no charge] (1.1) [click for support]

  / System/Library/Extensions/Seagate storage Driver.kext/Contents/PlugIns

  [no charge] com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) [click to support]

  [no charge] com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) [click to support]

  [no charge] com.seagate.driver.SeagateDriveIcons (5.1.1) [click to support]

  Demons of launch system problem: ℹ️

  [failure] com.apple.logd.plist [click for more information]

  [loading] org.postfix.newaliases.plist [click to support]

  Launch officers: ℹ️

  [no charge] com.adobe.CS4ServiceManager.plist [click to support]

  [no charge] com.avast.secureline.update - agent.plist [click to support]

  [no charge] com.avast.secureline.userinit.plist [click to support]

  [no charge] com.avast.update - agent.plist [click to support]

  [no charge] com.avast.userinit.plist [click to support]

  [operation] com.carbonite.launchd.status.plist [click to support]

  [loading] com.fujitsu.pfu.ScanSnap.AOUMonitor.plist [click to support]

  Launch of the demons: ℹ️

  [failure] com.adobe.fpsaud.plist [click to support]

  [loading] com.avast.init.plist [click to support]

  [loading] com.avast.secureline.init.plist [click to support]

  [loading] com.avast.secureline.uninstall.plist [click to support]

  [loading] com.avast.secureline.update.plist [click to support]

  [loading] com.avast.uninstall.plist [click to support]

  [loading] com.avast.update.plist [click to support]

  [operation] com.carbonite.launchd.daemon.plist [click to support]

  [operation] com.carbonite.launchd.monitor.plist [click to support]

  [loading] com.carbonite.launchd.watcher.plist [click to support]

  Elements of user login: ℹ️

  Mail request hidden (/ Applications/Mail.app)

  iTunesHelper UNKNOWN (missing value)

  Dropbox application (/ Applications/Dropbox.app)

  Adobe Photoshop CS4 Application (/ Applications/Adobe Photoshop CS4/Adobe Photoshop CS4.app)

  Screenhero hidden UNKNOWN (missing value)

  Request for InstUtilLaunch (/Library/Printers/Brother/Utilities/InstallUtility.app/Contents/Resources/Inst UtilLaunch.app)

  Application LOGINserver (/ Library/Printers/Brother/Utilities/Server/LOGINserver.app)

  AOUMonitor Application (/ Applications/ScanSnap online Update.localized/AutoOnlineUpdater.app/Contents/MacOS/AOUMonitor.app)

  Internet Plug-ins: ℹ️

  LogitechHarmony: Version: 2.0 - SDK 10.7 [click for support]

  Web of Google Earth plugin: Version: 6.0 [click for support]

  Default browser: Version: 601 - SDK 10.11

  Flip4Mac WMV Plugin: Version: 2.4.4.2 [click for support]

  CoolirisWebKitPlugin: Version: Unknown [click for support]

  OfficeLiveBrowserPlugin: Version: 12.3.6 [click for support]

  AdobePDFViewerNPAPI: Version: 15.010.20060 - SDK 10.8 [click for support]

  FlashPlayer - 10.6: Version: 21.0.0.242 - 10.6 SDK [click for support]

  Silverlight: Version: 5.1.20513.0 - 10.6 SDK [click for support]

  QuickTime Plugin: Version: 7.7.3

  Flash Player: Version: 21.0.0.242 - 10.6 SDK [click for support]

  iPhotoPhotocast: Version: 6.0

  AdobePDFViewer: Version: 15.010.20060 - SDK 10.8 [click for support]

  JavaAppletPlugin: Version: 15.0.1 - 10.7 to check the version of the SDK

  The Safari Extensions: ℹ️

  Facebook cleaner

  Latest news

  1 - ClickWeather

  Facebook Photo Zoom

  Unplug

  Ghostery

  Dashlane

  Amazon search discount

  PriceBlink

  WOT

  AdBlock

  3rd party preference panes: ℹ️

  Flash Player [click for support]

  Flip4Mac WMV [click for support]

  TechTool Protection [click for support]

  Time Machine: ℹ️

  Skip system files: No.

  Mobile backups: OFF

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 2.00 TB disk used: 536,90 GB

  Destinations:

  Feedback Up [Local]

  Total size: 999,86 GB

  Total number of backups: 50

  An older backup: 2016-04-06 19:21:02 + 0000

  Last backup: 2016-05-31 01:28:34 + 0000

  Backup disk size: too small

  Backup size GB 999,86 < (disc 536,90 GB X 3)

  By CPU process back to the top: ℹ️

  100% CarboniteDaemon

  3% WindowServer

  Console 3%

  hidd 1%

  1% adobe Photoshop CS4

  Top of the process of memory: ℹ️

  Com.apple.WebKit.WebContent 696 MB

  541 MB softwareupdated

  Safari 503 MB

  CarboniteDaemon 399 MB

  348 MB mds_stores

  Virtual memory information: ℹ️

  1.59 GB of free RAM

  3.24 GB of RAM active

  6.54 GB RAM idle

  1.51 GB RAM cable

  GB Page-ins 212,57

  Breaks in Page 443 MB

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• Complete the SQL to several databases using OEM

  Hello.

  I have to create 6 new identical users in almost all of our databases (approx. 500 targets)

  I was wondering if it is possible to do so through the OEM?

  By using the web-graphic interface or by extracting information such as views

  Select "sqlplus system/password @..." » || target: port | .....

  the target of $ mgmt,...

  where the...

  ect...

  NOTE: We have no listeners in our oem.

  Best regards

  Anders

  Agree with Courtney. You can create a SQL in OEM work for the creation of 6 user accounts and run it against all the targets of 500 or more. Targets all credentials must registered OEM.

  Alternatively, you can save that work to the library for future use

  Sorry Anders, I don't understand what you mean by "we do not have listeners in our oem"? You must have repository OEM DB & operational auditor he...

  Thank you

  Amit

• How the value for several variables using a single guest

  Is there a way to put more than one variable with a single guest?
  for example, the value @CurrentYear and @PasteYear using just a single guest for @CurrentYear.
  
  A clue?
  
  Thank you
  
  Luke

  Using variables to repository you can set like this.
  Check this link http://gerardnico.com/wiki/dat/obiee/set_variable

  If brand pls help

• How to replace the units of a channel using scripts % 3F

  Hello

  I have a few questions about the manipulation of the channel property 'unit' by scripts.

  Case 1: If the unit in the chain is not specified in the properties, what command should be used to add the inside unit?

  Case 2: When I create using the string ' Call.Root.ChannelGroups (1). Channels.Add ("name", DataTypeFloat64, 1)', empty space of unity being, what other command can be used which was available to the units to the breast?

  Case 3: Consider that I have channel (channel A) with the already defined unit (x), how can I replace the unit with another (y)? (Units of x and there belong to different physical quantities, so the ChnUnitConvert)

  Pls let me know if you nee details on the same.

  Kind regards

  Fazil Shah.

  Hi Fazil,

  The key word for SCRIPT DIAdem units is "unit_string". If you open the SCRIPT and open the channel property list you can select the property unit and drag & drop it in the SCRIPT Editor. This creates the code of script for the property.

  Case 1
  You have the options of towing: a quallified assignment complete or a channel object variable (if you have more settings for the channel of the second alternative is better)

  Data.Root.ChannelGroups (1). Channels ("mychannel"). Properties ("unit_string"). Value = "MyUnit.

  or

  Dim oChn
  Set oChn = Data.Root.ChannelGroups (x). Channels ("mychannel")
  oChn.Properties ("unit_string"). Value = "MyUnit.

  case 2
  You must add the unit after the creation of the channel

  Set oChn = Data.Root.ChannelGroups (x). Channels.Add ("MyChannel", DataTypeChnFloat64)
  oChn.Properties ("unit_string"). Value = "MyUnit.

  case 3
  It's the same as case 1 or if you do not want to use an already existing channel device, it can look like this

  oChnA.Properties ("unit_string"). Value = oChnB.Properties ("unit_string"). Value

  I hope that answers your questions

  Greetings

  Walter

• error message: "the printer is configured to use o2 ink cartridges.

  My HP C7280 all-in-one printer was purchased in Australia and was then introduced to the South Africa. O2 cartridges are not available in South Africa, the printer can be reconfigured to use the local cartridges?

  Hello FANaude.

  You must contact the HP support by phone in your country for assistance in obtaining the printer reset to accept cartridges from a different region.

  Use the link below to find how to contact HP phone support in your country.

  http://WWW8.HP.com/us/en/HP-information/summary/WW-contact-us.html

  See you soon!

• Change the time of the Capture of several Photos

  I had the wrong date on a shooting over 200 photos, and I'm trying to fix the date.  I can do this one at a time, but the option "replace all" does not exist in stand-alone LR 6.  Change button does not change the dates.  Save metadata by train does not either, nor does not synchronize.  Is it possible to change the date of capture on all these files at the same time?

  Oops!  Just thought it had to be in the library grid view and select in the main panel, instead of simply by selecting on the bottom bar.  Think this would work.

  Thanks for your help.  See you soon!

• When I installed the web client vsphere using vcenter server iso, encounted an error that the vcenter server signon administrateu use name and password is invalid

  VCenter server is version 5.1 and this server is a member of the working group.

  It comes to my administrator:

  

  So, I used ISO server vcenter and installed web client pulg-in vsphere, it prompted:

  I've used many ways, but failed.

  usernme:admin@system-domain,

  so, I do not know how to solve, and I only know this administrator password.

  I'm not vCenter sign the only to have another admin, please help.

  

  and another question: how install and configure the data via the vsphere 5.1 customer protection, vsphere isn't vsphere web client.

  You must provide credentials for the user admin@system-domain.

• Error in the upload of an image using dreamweaver file

  Hi to you all!

  Please I need you help PRO. My case seems similar to some of the ones I saw, but my code is completely different.

  I wrote this code below using PHP in Dreamweaver and its used to download images to the MySQl database. Now when I download about 6 pictures, it shows file downloaded successfully. But if I try to download something below 6 images, it will refuse to download and will resonate Upload Failed.

  <? PHP

  If (isset($_POST['submit']))

  {

  $projid = $_POST ['PROJID"];

  $projname = $_POST ["projname"];

  $name = basename($_FILES['file_upload']['name']);

  $t_name = $_FILES ['file_upload'] ['tmp_name'];

  $dir = "upload";

  If (move_uploaded_file ("$t_name, $ dir." / ". $Name"))

  $nameone = basename($_FILES['file_uploadone']['name']);

  $t_name = $_FILES ['file_uploadone'] ['tmp_name'];

  $dir = "upload1;

  If (move_uploaded_file ("$t_name, $ dir." / ". $Name"))

  $nametwo = basename($_FILES['file_uploadtwo']['name']);

  $t_name = $_FILES ['file_uploadtwo'] ['tmp_name'];

  $dir = "upload2."

  If (move_uploaded_file ("$t_name, $ dir." / ". $Name"))

  $namethree = basename($_FILES['file_uploadthree']['name']);

  $t_name = $_FILES ['file_uploadthree'] ['tmp_name'];

  $dir = "upload3;

  If (move_uploaded_file ("$t_name, $ dir." / ". $Name"))

  $namefour = basename($_FILES['file_uploadfour']['name']);

  $t_name = $_FILES ['file_uploadfour'] ['tmp_name'];

  $dir = "upload4";

  If (move_uploaded_file ("$t_name, $ dir." / ". $Name"))

  $namefive = basename($_FILES['file_uploadfive']['name']);

  $t_name = $_FILES ['file_uploadfive'] ['tmp_name'];

  $dir = "upload5";

  If (move_uploaded_file ("$t_name, $ dir." / ". $Name"))

  {

  @mysql_select_db ($database_ProjMonEva, $ProjMonEva);

  $qur = "insert into tbl_images (imageid, PROJID, ProjectName, name, path, Name1, pathone, name2, pathtwo, namethree, paththree, namefour, pathfour, namefive, pathfive) values (", '$projid', '$projname', '$name', "upload / $nom", "$nameone", "upload / $nom1", "$nametwo", "upload / $nom2", "$namethree", "upload / $namethree", "$namefour", "upload / $namefour", "ve $namefi", "upload / $namefive") ";"

  $res = mysql_query ($qur, $ProjMonEva);

  ECHO 'the file downloaded successfully ';

  }

  on the other

  {

  echo ' upload failed! ';

  }

  }

  ? >

  I see the problem coming from echo, but I am stock and do not know how to correct it. Can someone help me please.

  Thank you, in advance, Mike

  Hi Brégent,

  Do you mean like this

  <>

  If (isset($_POST['submit']))

  {

  $projid = $_POST ['PROJID"];

  $projname = $_POST ["projname"];

  $name = basename($_FILES['file_upload']['name']);

  $t_name = $_FILES ['file_upload'] ['tmp_name'];

  $dir = "upload";

  If (move_uploaded_file ("$t_name, $ dir." / ". $Name"))

  $nameone = basename($_FILES['file_uploadone']['name']);

  $t_name = $_FILES ['file_uploadone'] ['tmp_name'];

  $dir = "upload1;

  If (move_uploaded_file ("$t_name, $ dir." / ". $Name"))

  $nametwo = basename($_FILES['file_uploadtwo']['name']);

  $t_name = $_FILES ['file_uploadtwo'] ['tmp_name'];

  $dir = "upload2."

  If (move_uploaded_file ("$t_name, $ dir." / ". $Name"))

  $namethree = basename($_FILES['file_uploadthree']['name']);

  $t_name = $_FILES ['file_uploadthree'] ['tmp_name'];

  $dir = "upload3;

  If (move_uploaded_file ("$t_name, $ dir." / ". $Name"))

  $namefour = basename($_FILES['file_uploadfour']['name']);

  $t_name = $_FILES ['file_uploadfour'] ['tmp_name'];

  $dir = "upload4";

  If (move_uploaded_file ("$t_name, $ dir." / ". $Name"))

  $namefive = basename($_FILES['file_uploadfive']['name']);

  $t_name = $_FILES ['file_uploadfive'] ['tmp_name'];

  $dir = "upload5";

  If (move_uploaded_file ("$t_name, $ dir." / ". $Name"))

  @mysql_select_db ($database_ProjMonEva, $ProjMonEva);

  $qur = "insert into tbl_images (imageid, PROJID, ProjectName, name, path, Name1, pathone, name2, pathtwo, namethree, paththree, namefour, pathfour, namefive, pathfive) values (", '$projid', '$projname', '$name', "upload / $nom", "$nameone", "upload / $ Name1", "$nametwo", "upload / $nom2", "$namethree", "upload / $namethree", "$namefour", "upload / $namefour", "$namefive", "upload / $namefive") ";"

  $res = mysql_query ($qur, $ProjMonEva);

  ECHO 'the file downloaded successfully ';

  on the other

  {

  echo ' upload failed! ';

  }

  }

  ?>

• Pre-trigger samples of error parameter

  I have problems of acquiring data with pre-trigger samples in the capture of several channels.

  If I trigger and capture on the same channel (I tried 1-4) then it works very well, regardless of the number of samples before relaxation together. If I trigger on channel 4 and capture channels 4 and 1 (passed in this order), with no set pre-trigger samples, then it works fine. However, if I trigger on channel 4 and capture channels 4 and 1 (passed in this order), with samples pre-trigger together, then I get the following error:

  Error-10621 to AI control. Possible reasons:
  NOR-DAQ LV: The specified trigger signal cannot be assigned to the resource for the trigger.

  The forum search, I found a few other people who have had the same problem , but they had no solutions. Any ideas?

  Thank you Christina, it's a good suggestion. I just discovered that it is a hardware limitation, however.