Completed the assignment of employees not being not an expiry date

Similar Questions

• the fax log is not up-to-date.

  I have a HP Officejet 4500 Desktop which I am running with a Windows XP system.  The fax log is not up-to-date.  How can I get the software to update the journal?  Everything seems to work fine, just does not update the log when faxes are sent or received.

  The software does not control the log of faxes.  The printer's firmware.  If not keep along as it should, there is something glitching in the firmware, or the internal connetion of the newspaper's fax modem has been disrupted.  If the internal connection was cut off, there is nothing that can be done, so let's try everything that can be done for the firmware.  There is no updated firmware for this printer, in order to fix this way came out.  The next thing to try is a couple of resets.  A hard reset first and a partial reset if the hard reset does not fix.

  To do a hard reset:

  1. Make sure that the printer is turned on.
  2. Pull out the power cord from the printer.
  3. Pull out the power cord from the wall.
  4. Wait 30 seconds.
  5. Plug back in the printer and turn it on.

  To make a partial reset:

  1. Follow steps 1-4 for a hard reset, but will not go past step 4.
  2. Plug the power cord into the wall, but connect are not in the printer.
  3. Press and hold the # and 3 buttons.
  4. While now the buttons, plug in the printer.
  5. When the lights come on, release the buttons.

  If reset does not solve the problem, then the connection was cut off, and there is nothing more we can do.

• The splash screen is not up-to-date files more recent ten. I use 2015.1.1 is there a parameter? Preference?

  The splash screen is not up-to-date files more recent ten. I use 2015.1.1 is there a parameter? Preference?

  Hi Jontbm,

  Go to the file menu > open recent item > clear recent files list > restart Photoshop and then check out.

  Kind regards

  Claes

• ADF_FACES - 60003:Component with the ID: pt1:cil2 not registered Active data.

  When I generate a PDF reports using < af:fileDownloadActionListene > and Ireport this erros fires when I click on active tab.
  I use Studio Edition Version 11.1.2.3.0:
  
  Pt1 is a < af:pageTemplate >
  cil2 we < disabled af:commandImageLink = "#{!}" bindings. CreateInsertEnc.enabled}"id ="cil2 ".
  
  
  
  < af:commandImageLink id = "cil11".
  Binding = "#{backingBeanScope.BakingDocument.cil11} '"
  Icon="/pictures/printer.png".
  shortDesc = "Print" >
  < af:fileDownloadActionListener method="#{backingBeanScope.BakingCotizar.PrintDoc}"/ >
  < / af:commandImageLink >
  Error log:
  
  java.lang.IllegalStateException: ADF_FACES - 60003:Component with the ID: pt1:cil2 not registered Active data.
  at oracle.adfinternal.view.faces.activedata.PageDataUpdateManager.unregisterComponent(PageDataUpdateManager.java:600)
  at oracle.adfinternal.view.faces.context.RichPhaseListener.handleStartAndStopActiveData(RichPhaseListener.java:478)
  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:487)
  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:202)
  at javax.faces.webapp.FacesServlet.service(FacesServlet.java:508)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:173)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:125)
  to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:468)
  at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
  to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:468)
  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:293)
  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:199)
  at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:119)
  at java.security.AccessController.doPrivileged (Native Method)
  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3715)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3681)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

  http://tompeez.WordPress.com/2011/11/16/jdev-11-1-2-1-0-dealing-with-adf_faces-60003-error-component-with-ID-r11cb1-not-registered-for-active-data/

  Dario

• vRA 6.2.3 new company creation group error - "cannot complete the requested operation: resource not found.»

  Hello

  I have tried to create a new group of companies in vRealize Automation 6.2.3 and received the following error:

  The requested operation cannot be completed: resource not found.

  I've attached a screenshot of the error.  All services on the device of vRA show such registered.

  I think that this is related to the duty reinstall my SQL IaaS database a few weeks back, but I'm not sure.

  Any help would be greatly appreciated,

  -Mark

  I finally got to the bottom of this.  It was because of the vRA IaaS server being unable to speak to the DTC resource on my SQL cluster due to these two components are in different domains.

  If you are interested, I have documented the solution here:

  http://virtualhobbit.com/2015/10/02/configuring-DTC-access-between-vrealize-automation-IAAS-and-Microsoft-SQL-Server/

  -Mark

• Completed the scheduled task has not dropped

  This has been already posted in the forum Planner, but I guess that more people of this forum watch. Sorry for the double post.
  
  
  I create two jobs where the 2nd is waiting for the first to finish. The code example is from this thread: Re: consumption of scheduler events
  

  begin
    dbms_scheduler.create_job (
      job_name => 'j1',job_type => 'plsql_block',
      job_action =>  'insert into test_event values(systimestamp, ''first job runs'');commit;',
      enabled => false,
      auto_drop => true);
    dbms_scheduler.set_attribute('j1', 'raise_events', DBMS_SCHEDULER.JOB_SUCCEEDED);
  end;
   
  begin
    dbms_scheduler.create_job('j2',
      job_type=>'plsql_block',
      job_action=>'insert into test_event values(systimestamp, ''second job runs'');commit;',
      event_condition => 'tab.user_data.object_name = ''J1''',
      queue_spec =>'sys.scheduler$_event_queue,job$_agent',
      enabled=>true,
      auto_drop => true);
  end;
   
  begin
    -- Enable the first job so that it starts running
    dbms_scheduler.enable('j1');
  end;

  It works (j1 and j2 performed in sequence), but the 2nd work (j2) is not deleted from user_scheduler_jobs after completion. The State remains STEADY.
  It is a problem because I want to execute the code several times. This translates into:
  
  ORA-27477: "J2" already exists
  ORA-06512: at "SYS." DBMS_ISCHED", line 99
  ORA-06512: at "SYS." DBMS_SCHEDULER", line 295
  ORA-06512: at line 2
  
  I can, of course, drop job j2 before creating this new, but I wonder why j2 is not automatically removed.
  
  Version is Oracle Database 10g Express Edition Release 10.2.0.1.0

  Hello

  Still not sure exactly what is happening, but I think you can safely get around it by adding a max_runs attribute = 1 to J2.

  for example

  begin
    dbms_scheduler.create_job (
      job_name => 'j1',
      job_type => 'plsql_block',
      job_action =>  'insert into test_event values(systimestamp, ''first job runs'');commit;',
      enabled => false,
      auto_drop => true);
    dbms_scheduler.set_attribute('j1', 'raise_events', DBMS_SCHEDULER.JOB_SUCCEEDED);
  end;
  /
  
  begin
    dbms_scheduler.create_job(
      job_name=>'j2',
      job_type=>'plsql_block',
      job_action=>'insert into test_event values(systimestamp, ''second job runs'');commit;',
      event_condition => 'tab.user_data.object_name = ''J1''',
      queue_spec =>'sys.scheduler$_event_queue,my_agent',
      enabled=>true,
      auto_drop => true);
    dbms_scheduler.set_attribute('j2', 'max_runs', 1);             "<-- added this line!!"
  end;
  /
  
  begin
    -- Enable the first job so that it starts running
    dbms_scheduler.enable('j1');
  end;
  /
  

  I hope this helps!

  ADOS

• Ive got windows xp... When I turn it on it starts windows loading ok.the icon rises then atfer a black screen and a message saying that the application has no enterliszed properely.then click ok to complete the applications.still does not

  applications has not enterlislze properely.click on ok to finish the applications.i done this but still don't work

  Hi Tracey341975,

  Your computer will load at all? If operations so the following, listed in the link below. If it does not start, please in safe mode by pressing F8 black of the screen before the windows logo and select Safe mode and perform the following, listed steps in the link below.

  http://support.Microsoft.com/kb/310353

  Let us know if your computer has no errors in case of boot. If it is not it means that you have an application that is causing this error, we can identify and solve.

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• CS 5 software update is unable to complete the installation process. Note that leaving the app and repeat then, but it has no effect.

  

  Download an update manually, updates

• The user migrated but not up-to-date on the NAS

  Hello, I've migrated 3 accounts but the last of them was not updated on the NAS.

  When I check the actions, he stills appears the username and not e-mail as those migrated.

  I tried to delete the e-mail for this user shared folders on the portal readycloud, but it wouldn't work.

  Tried to restart the NAS server and nothing.

  If I change the shared folders on the portal readycloud it works, but it wouldn't let me delete the user.

  Furthermore, in the application, the user has no device.

  How can I fix?

  How long have you had this NAS?

• can recharge the system cd and not lose my data backed up?

  I want to know if there is way to reinstall windows xp and not olse current saved data/programs?

  Yes, if you have a real Windows XP installation CD and do an installation "repair" (see http://michaelstevenstech.com/XPrepairinstall.htm).

  No, if you have a CD provided by the manufacturer "valuation".  These CD restore (or 'recover') the system to its state of charge factory.

• When I start the update that are not up to date and progressbar isn't in the future.

  When I start my windows update there are 3 update:

  1. Update for the Microsoft visual studio 2008 pack 1 ATL for smart service of...
  2. Security Update for Microsoft visual studio 2008 service pack 1
  3. Update for Microsoft visual studio 2008 service pack 1
  which is not updated and progress bar does not go forward and don't no cancellation.
  What do I do?

  Hello

  Method 1:

  It may be that a third-party application is causing this issue. Put the system at boot. Follow the steps mentioned in the article given below to configure the system to boot and try to update.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135     

  Note: Once you have finished installing, follow step 7 article to start on normal startup.

   

  Method 2:

  Also try to update manually by downloading from the link provided below

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=fbee1648-7106-44a7-9649-6d9f6d58056e&displaylang=en

   

  Method 3:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

   

  Hope this helps,

• Why the text effects are not up-to-date in preview mode? CC2015

  When you use simple text like the glow effects, the effect is not updated when the preview mode is checked.

  This makes the feature extremely tedious to use.

  The question has arisen in the past without a solution...  Text effects do not update on cc 2015

  Please advise as soon as possible,

  Thank you very much

  John

  Exactly what version of InDesign are you using? The current version is 2015.3 (11.3). What operating system? Have you tried to restore your InDesign preferences?

  Garbage, replace, reset or restore the application's preferences

• APEX_UTIL. STRING_TO_TABLE trying to separate items of the shuttle. . Not to collect data

  I use the below code and I don't receive the no found error of data.
  I use this code to separate the content from the shuttle point... and put it in a text field.
  But I sometimes randomly recive the no data found error...
  No idea why it should happen... I don't know why this piece of code will trigger the when_no_data found the error.
  Any info will be appreciated
  
  Thank you and best regards,
  Paul
  
  
  v_selected APEX_APPLICATION_GLOBAL. VC_ARR2;
  Start
  v_selected: = APEX_UTIL. STRING_TO_TABLE(:P53_x);
  
  If v_selected (1) is not null then
  : P53_XADISSUE1N: = v_selected (1);
  end if;
  If v_selected (2) is not null then
  : P53_XADISSUE2N: = v_selected (2);
  end if;
  
  
  I ran an apex debugging and it is the part of the production...
  Transformation point: submit before 4 calculation
  
  0,09300 0.00400... "Adv_proc" process: PLSQL (ON_SUBMIT_BEFORE_COMPUTATION) declare mmagazine_no number (10); madvtno number (10); mgno number (10); minvno number (10); mcontact_no number (10); v_selected APEX_APPLICATION_GLOBAL. VC_ARR2; begin v_selected: = APEX_UTIL. STRING_TO_TABLE(:P53_x); If v_selected (1) is not null 4 th
  
  0.09700 0.00100 encountered unhandled exception to the process type 4 PLSQL
  
  0.00100 error 0,09800 page view...
  
  Published by: pauljohny on May 15, 2012 02:34

  DECLARE
    t_count number;
  BEGIN
    l_vc_arr2 := APEX_UTIL.STRING_TO_TABLE(:P53_x|| ':');
    t_count := l_vc_arr2.count - 1;
    if t_count > 0 then
      :P53_XADISSUE1N := l_vc_arr2(1);
    end if;
    if t_count > 1
      :P53_XADISSUE2N := l_vc_arr2(2);
    end if;
    if t_count > 2 then
      :P53_XADISSUE3N := l_vc_arr2(3);
    end if;
    --.....
  exception
    when others then null;
  end;
  

  Kind regards
  Richard
  -----
  blog: http://blog.warp11.nl
  Twitter: @rhjmartens
  If you answer this question, please mark the thread as closed and give points where won...

• Render freeze/Crash at the end - program does not

  Hi guys

  IM at my end with this problem and I would appreciate a solution or an explanation of the problem im having.

  When I visited my project for final output it renders all frames and manages to the end on the progress bar, but as soon as it seems at the end it freezes. It does not seem complete. (the program goes into "not responding") I have left for up to 4 hours and it still just hangs. What is happening with all projects and the scenes independently of memory allocation or resolution.

  IM under CS4 with windows 7 and have version 9.0.3 of After Effects. IM also using the latest plugin optical flares with all updates. my hardware is Intel (r) Core i7 CPU clocked at 2.66 GHz [email protected]

  insalled RAM is 4 GB with 3.24 GB usable

  32-bit operating system

  Graphics card is NVIDIA Ge Force GTX285 with 2 GB memory independent

  Please help me to find a way to solve this problem

  Thank you

  With only 4 GB of RAM, you should not use multiprocessing.  If it is enabled, disable it.  If you use Open GL to speed rendering, turn that off too: it rarely helps and often hurts.  Your problem could be solved easily.

  But since you're on AE 9, it images you use could also be the problem.  It would be more often extracted from XDCams, HDV cameras and digital SLRs.  AE 10 solved the problem, but that won't help you now.  However, a response that I usually give all the time on the Creative COW may still apply:

  Answer Dave #1 Stock:

  If the images you imported in AE are all sort of what follows - images in a codec to acquire HDV, AVCHD, MPEG2, MPEG1, mp4, mts, m2t, H.261 or H.264 - you must convert it to a different codec.

  These kinds of sequences use the time compression or inter-trame. They have keyframes at regular intervals, with information of the full frame.  However, middle managers have all the information.  Codecs inter-trame launch duplicate information.

  In order to maintain maximum efficiency made, AE needs complete information for each image. But because these sorts of images contain only partial information, AE freaks out, resulting in a wide variety of problems.

  I'm a Mac guy, I would like to convert Quicktime movies in the Animation or PNG codec; both are lossless.  I'll use Apple Compressor, Adobe Media Encoder or Quicktime Pro to do.

• The printer receives do not all data. It is caused by the MAC address filtering.

  How can I solve this problem.

  The printer attempted to join the network but does not receive any data.  This may be caused by the MAC address filtering. If MAC address filtering is enabled and you want to keep enabled, add the MAC address of your printer in the list of devices allowed for your wireless access point or router before continuing.

  HP Officejet 4500 - G510n wireless all-in-one printer

  Not at all use MAC filtering.  Make sure it is off in your router.