complicated problems gpu need a hero!

Similar Questions

• WANT to PC dv7: at startup, I get a blue screen with a :( Your PC has encountered a problem and needs to restart.

  While I was using my laptop I received a message that HP was running some sort of program disagnostic and in the end, he asked if I wanted to repair the problems. I declined the offer. However, the next time I turned on the computer, I saw the first time the HP logo, then the message "automatic repair Preparation". After a few seconds there is a short rectangle that flashes on and disappears. Then I got a blue screen with: your PC encountered a problem and needs to restart. We will restart for you. "Who starts a blue screen and reboot cycle. Blue screens replacement error messages saying: "If you want to learn more, you can search online for later for this error" and once it will say 'FAT file system' and once 'NTFS file system. I have spent to support HP dv7 ENVY page and tried the suggestions of repair without success. Is it possible to go beyond these two error messages and their blue screens to get my system working again? If so, how?

  Hello

  Error code 24 characters is a failure of the short test (DST) disk Self and would indicate that hard is defective and must be replaced.  It is also consistent with your description of the problem.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - if necessary, you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are no longer under warranty, it's a fairly simple procedure to replace the HARD drive yourself - a brief guide on this is below.

  Readers on the following links are examples that would be perfect for your laptop.

  Hard drive 500 GB

  750 GB hard drive.

  1 TB laptop hard drive.

  The procedure to replace the hard drive begins on Page 56 of your maintenance & Service Guide.

  About reinstalling Windows 10 on new HARD drive, as long as the previous installation of Windows 10 had activated Ok after upgrading to Windows 7/8.1, you can simply create your own Windows 10 installation media and perform a new installation as described in the guide on the following link.  Note: On the activation screen, select "I have not a product key" - Windows will activate automatically once installation is complete.

  http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

  Kind regards

  DP - K

• Issue of games - exe has encountered a problem and needs to close

  Hello world

  I was wondering if there was someone out there who could help me.

  I can load a game on my laptop (demanding nothing, just football coach) but when I then open the game when loading I get the following message

  "(whatever_the_game_is).exe has encountered a problem and needs to close." We are sorry for the inconvience.

  Can anyone recommend a way to resolve this?

  Thanks in advance

  Rich

  Hi Rich

  Using original or copy?

• Satellite C660 - 1 M 0 encountered a problem and needs to restart

  Hello
  Today, when I turned on my laptop before it starts, I get a blue screen says:
  Your computer has encountered a problem and needs to restart. Collection of information.

  What is this problem for?
  My laptop is TOSHIBA Satellite C660 - 1 M 0 i3

  Is this a Windows problem?

  Here is a message I received in Windows7forums on this subject but I don't understand what he means, can understand you for me please? e

  * Re: Heeelp! Your computer ran into a problem! *

  These screens generally include a sentence in the screen "fallen on problems." Usually something like Violation of Watchdog DPC (Deferred procedural call) and are often associated with a bad driver and or a power saving state not supported (sleep, hybrid sleep, hibernate, etc.,)

  First of all, make sure that you have the latest drivers from your computer manufacturer and or the individual device manufacturer's Web site. Then consider whether this computer manufacturer includes any software that may be incompatible with Windows 8 CP or is somehow patented conflict with Windows 8 CP in energy saving power scheme options. You may need to experiment a little, maybe remove the proprietary tools or taste affecting your schema of high performance or even the options down or max.

  The overview of consumption is more or less a new frontier for everyone here to work through this kind of problem is going to be informative and beneficial for all who read your thread, so please keep us posted as to how you are progressing with your current number.

  Concerning
  Randy

  Hello

  Blue screen of death (BSOD) may be caused by software or hardware problems.
  To know if it of really a software problem, you can try running a HARD drive recovery procedure which would fix the laptop back to factory settings.

  What is an option for you?
  If Yes, check this:
  + How to recover a Toshiba notebook with the HDD recovery procedure.
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

• I installed OS 10.10.5 and MS Office 2011 give me an error message "word has encountered a problem and needs to close."

  iMAC 27 "16 GB memory; 2.66 GHz; Hard drive GB 999; running IOS 10.10.5

  Problem arises when you try to use Microsoft Office 2011; Error message "this office (word, excel, ppt) has encountered a problem and needs to close."  This happens because it attempts to open all programs... Word, excel, power point.

  I uninstalled 2011 MSoffice and recharged using my home and student version of disk 14.6.1522; same problem

  You may need to upgrade to MS office 2016. It cannot be supported by Yosemite.

  Hope It helps.

  AppleMan

• Laptop HP 15: your PC encountered a problem and needs to restart

  DESPERATELY NEED HELP
  Received a HP Notebook 15 Pc in February 2016.
  Search birthday gifts for husband last night, and when I return from additional research, I get a screen showing.
  "Restart your PC on a problem and needs. We will provide for you.
  "" If you want to learn more, you can find: ntsf_file_system "(or fat_file_system).
  
  I'very is part of research and hear that this amounts to the blue screen of death...
  My windows disk that I keep reading I need was preinstalled on the computer when I got it, AND I have a lot of important files on this computer (IE. Family photos, the birth of my son, important work files, etc.)
  
  I've never been so stressed on a computer, before...
  I have a project to work on this thing that is due on Tuesday and I can't do same passet this stupid screen
  And when I try to HP support, they are closed because of the time and the holidy
  
  Is there anyone who might be able to help me or give me advice?
  I can't take it into a repair shop either because because of holiday... theyre closed. And I've hardly have enough money to get to the pay day!
  
  PLEEAAASE help?

  Ok.  You must follow this:

  http://www.support.HP.com/us-en/document/c04593971

  First try step 1. Hard reset.

  If it does not proceed to step 4. and follow the instructions to restore to the point when Windows 10 or 8 cannot start.

  Let me know the result.

• R253cl 15 HP: pc encountered a problem and needs to restart. NO LESS driver IRQL OR EQUAL (rtwlane.sys)

  NO LESS driver IRQL OR EQUAL (rtwlane.sys)

  Hi @bazrul,

  Thank you for your inquiry.

  I understand that when you try to start your laptop, you get the error ': PC encountered a problem and needs to restart. " NOT LESS DRIVER IRQL OR EQUAL (rtwlane.sys)".

  I'm assuming you get a blue screen with this error and are unable to load Windows. Is this correct?

  You can start in safe mode?  HP computers - Windows Safe Mode (Windows, 10, 8).

  If you are able to boot into safe mode and that you have installed Norton, you can try to uninstall it as others have said that solved the problem.

  If this is the case and you can again access Windows, run the HP Support Assistant to acquire the recommended updates.

  I also suggest to do the Windows updates.

  Please let me know the results.

  Good luck!

• HPSF.exe has encountered a problem and needs to close

  using pavilion hp Elite desktop, windows 7 Edition 150ff Home premium, receive a HPSF error message. EXE has encountered a problem and needs to close. I tried to download it again from the HP website, but I get a message saying "your system does not meet the minimum requirments for this update, update has been cancelled. (1602) my computer has a hard disk of 1 terabite with 8 GB of ram and I have very little installed above with the exception of 4 songs and microsoft office and student that I bought and Norton Internet Security.

  Someone can tell me why I get this message and how do I fix the problem, my office is wired but my printer is wireless, I have high speed internet and I have also a HP Envy 700-019 again at Christmas last year, which has a HD 2 terabite with 12 GB of ram and windows 8, desktop computers are 64-bit. Not used at the same time.

  This message means that the HP Support Assistant had a problem.

  I recommend to uninstall the application from the--> utility Control Panel programs & features and then put it back. You can use the charm of the search and the type of programs & features. Click on the above icon to call the utility.

  You can reinstall from the Recovery Manager.  Invoke the charm of the search and type in recovery and click the icon.

  

  Find the Recovery Manager from the list of drivers and applications and put a checkmark in the box to the left and then click install in the lower right corner.

  

• "WMI has encountered a problem and needs to close."

  Windows Server 2003 SP2 (virtual server) get this popup error every few minutes: "WMI has encountered a problem and needs to close."
  In the application log:
  Source: Application error
  Event ID: 1000
  Category: (100)
  Failing application wmiprvse.exe, version 5.2.3790.4455, failed module ntdll.dll, version 5.2.3790.4937, address 0x000415f7 failure.

  Any ideas?

  Hello

  Your question is about Windows Server 2003 SP2. It is better suited for the public on the TechNet site. Please post your question in the following link for assistance:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads
  I hope this helps!

• the application has encountered a problem and needs to close

  I build the LV, a request using the tabs, the FPGA dll and DLLs that communicate with devices CAN, GPIB, and PCI.

  The apears program to work properly, but sometimes and I can't see the patern, it crashes with the error "the application has encountered a problem and needs to close...". »

  Sometimes the error apears when I'm trying to exit the program, other times it hangs before that.

  I can't find the error because the program can work well for several hours and then crash or it hangs after 5 minutes of work with it.

  Clues about what goes wrong?

  Kind regards

  Daniel Coelho

  I'm still going through the example, but since the error ocours sporadicaly this could take some time to identify the error.

  I was browsing the code and I was wondering about simple things, like:

  -J' have many local variables, could it be the cause protected by some kind of error?

  -Since I use dll on my code, is there a way to make sure that all DLLs are loaded and unloaded properly?

  My program has a TAB with a simple UI of TestStand and when I change the tabs I close the user interface for teststand. When I use this UI I have load and unload DLLs of same that I use on other tabs, i. e., when you use the UI I load all DLLs that communicate with devices and when I change the tabs I unload all DLLs because on each separate TAB I can control these indicidually devices.

  It's a little hard to explain, but I think I managed

  Is there a grain of truth on my questions? If so, what could I do?

• TCP/IP services has encountered a problem and need to close. Windows Server 2003 R2 SP2

  TCP/IP services has encountered a problem and need to close.

  Windows Server 2003 R2 SP2

  That left me without a network or to the Internet on a PDC named DOMCON.

  Tried so far:

  1. last signed NIC drivers installed (8.0.27.0) to HP NC3120 Fast Ethernet NIC.

  2 netsh int ip reset resetiplog.txt

  reboot, enter the details of the intellectual property, etc... NO JOY!

  This server has been running for years until now.

  I can join the registry and files DOMCON_MpsReports.cab NetworkSubkey.reg section.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  Here is the link:http://technet.microsoft.com/en-us/windowsserver/bb512919.aspx

• Cannot install 2 black & white or command conquer games. Error:Setup.exe has encountered a problem and needs to close. We are sorry for the inconvenience.

  The error occurs when I insert the game black & white 2 or command and conquer the first decade and click install on a automotive screens popping up, I am sure that these two errors are almost identical and sure if one is fixed so will the other be.

  The error that says "Setup.exe has encountered a problem and needs to close. We are sorry for the inconvenience. »

  To try to fix it already I found a page here which tells me how to install drivers different installshield, and I installed everything that have been listed. My operating system is Windows Xp home edition

  Hello
  
  Were you able to install these games without any problem before?
  Step 1: Install all updates of windows on your computer and check the number.
  Reference: http://support.microsoft.com/kb/306525 
  
  Step 2: Copy the game on your computer, then check the issue.

  Step 3: Perform the clean boot your computer.

  
  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135
  Note: To restore your computer to a Normal startup mode, follow these steps:
  
  1. click on start in the box start the search.
  2. type msconfig and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.
  3. on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  4. When prompted, click on restart.

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Patcher.exe has encountered a problem and needs to close. -Windows xp support center.

  Whenever I try to play a mmorpg called jade dynasty, on the Launcher, an error report appears asking me to send or do not send.

  "Patcher.exe has encountered a problem and needs to close."

  How should I do?

  I already tried to reinstall the game and update my video driver and it does not work.

  Hello

  Welcome to the forum of responses to Windows Vista.

  It's Windows Vista forums. To get the best possible answers to your question, I suggest you to report your query in the XP media center discussion forum.

  http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.Windows.mediacenter&lang=en&CR=us

  Let us know if that helps.

  Kind regards
  Anthony
  Microsoft technical support, please visit our Microsoft answers feedback Forum and let us know what you think.

• What is tcauto.exe have encured a problem and needs to close the average? It happned so I was trying to install the tax program h@r Block

  isn't tcauto.exe incurred has a problem and needs to close to average. It happened while I was trying to install the H@r Block tax software

  1. Insert the software CD into the CD drive.
  2. Right click on the desktop icon and select Explorer.
  3. Click the CD-ROM drive.
  4. Choose the file HRBlock_Premium_20XX_CD.exe or TaxCut_Premium_20XX_CD.exe (where XX is the year of the product), and then choose copy.
     The name of the file should State + or + E-file in the name.
  5. Close Windows Explorer.
  6. Right click on the desktop and then click Paste.
  7. Double-click the HRBlock_Premium_20XX_CD.exe or TaxCut_Premium_20XX_CD.exe file (where XX is the year of the product) file.
  8. Follow the instructions in configuration of installation

  http://www.TaxCut.com/customer_support/supportarticle.jsp?type=article&FAQ=0&acid=158&PFID=1&TID=4&STid=10&CID=40&aid=4474§ion=before

• I had installed the captain claw game and when I try to run the following error report is: of the Side-Scrolling Action-Arcade game has encountered a problem and needs to close.

  original title: C:\DOCUME~1\hariraj\LOCALS~1\Temp\7f3f_appcompat.txt

  I had installed the captain claw game and when I try to run the following error report comes... Please solve my problem...

  ....

  ARCADE-ACTION SIDE-SCROLLING GAME

  Of the Side-Scrolling Action-Arcade game has encountered a problem and needs to close.  We are sorry for the inconvenience.

  ERROR SIGNATURE

  AppName: cla.exe AppVer: ModName 1.3.0.60: cla.exe
  ModVer: 1.3.0.60 Offset: 000f3956

  THE FOLLOWING FILES MUST BE INCLUDED IN THE ERROR REPORT

  C:\DOCUME~1\hariraj\LOCALS~1\Temp\b285_appcompat.txt

  Please please please please help me... i will be grateful to you

  Hi Raj Kumar,

  You can follow the steps mentioned in the article below, which deals with a similar question

  Game hangs or quits unexpectedly
  http://support.Microsoft.com/kb/303032

  (Article apply to Microsoft games, steps for other games)