Components of access QML in c ++ with navigationpane

Similar Questions

• ADF against the REST business components to access data

  Hello

  JDeveloper 12.2.1

  We are about to build a custom application of ADF that must run completely on the site.

  Given that we build it from scratch, we want to start with last 12.2.1
  

  There is also no specific use cases where another application has consumed our application services.

  With the recent versions of JDeveloper and ADF, there was a lot of improvements made to REST etc. and other industry standards

  I came across some discussions about to consider the use of these new features

  https://groups.Google.com/Forum/#! Searchin'/adf / methodology/repairman$ 20services/adf-methodology/u0dz4x4w2xU/15xrimlxQaYJ

  https://groups.Google.com/Forum/#! Searchin'/adf / methodology/repairman$ 20services/adf-methodology/zpMv4PqOKhI/Qws0C4IBBYAJ

  We plan to use the default ADF Business components to access data, because our requirements and I am more inclined to the use of these.

  That is to say, using the ADF business components based on database objects directly (using a thin driver for data source)

  But I also want to determine if there is any other good reasons to use other ways to talk to the database (such as RESTful services) as shown in the links above.

  I believe, if we must use RESTful services to access the data, then it should be in the following scenarios.

  a. If the database is on a cloud (as if we use DaaS)

  b. There are already services available for the access to these data, and just build the user interface

  But if we build the application from scratch, which is supposed to be running on site, then I would choose the ADF business components to access data via a thin driver for the data source.

  Someone can correct me if I am wrong in my thinking?

  Thanks for any help.

  Sameer

  Without knowing your situation, I would say that it seems that the use ADF BC is the right way to go.

  It will allow you not only to access your database, but also add logic and to create complex data structures and relationships – all in a layer that is outside your database.

  Your ADF UI can then link directly to this ADF BC layer.

  If in the future you will need other interfaces to access the same logic through REST services - then that in 12.2.1 you can expose ADF BC as REST services will give you this ability.

• I downloaded Multi Access Tool from Mcafee with Firefox Mozilla, how do I reinstall if it does not work properly?

  I downloaded Multi Access Tool from Mcafee with Firefox Mozilla, how do I reinstall if it does not work properly?

  My sincere apologies, my Mcafee came via the Optimum/Cablevision, not Mozilla. I now managed to solve my problem and appreciate the 2 above responses. Thank you.

• Can I access on my iMac with MacBook cd drive

  Can I access on my iMac with MacBook cd drive

  You can if share you it on the network.   But you need to enable the sharing of files on the CD while it is inserted in the Mac by reading the information in the file menu, select it in the Finder.      Unfortunately the MacBook not having Firewire or love at first sight, you cannot use Disk Mode target using the player.

  It can be slow, is it a USB - C ethernet card or WiFi.    If you want to make sure you get the highest possible speed a USB optical drive should work fine.  http://www.MacSales.com/ made a few that actually work very well with Macs.

• Desktop remote access simultaneously in windows with multiple session in Windows Server 2008 support?

  I would like to have a remote desktop solution that allows me to connect to remote computers even while users are connected, with the help of another session. The idea is that the user working locally in the remote system can function normally undisturbed by the remote user. I have tried TightVNC , but I couldn't understand how to enter an independent session. I am using Windows Server 2008 and I want two users access to the server with two different sessions as remote users.

  There are forums dedicated to Windows Server, please transfer your question in the relevant Microsoft Technet forum here:

  http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .

  Thank you.      :)

  (I'm sorry, but I can't move this thread for you because the two forums are working on separate platforms)

• I'm trying to access a wireless network with the password provided for me. I get the following error message

  I'm trying to access a wireless network with the password provided for me. I get the following error message: "the network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 characters ascii or hexadecimal 10 or 26. "what does this error message mean and how do I address so that I can access the wireless network?

  I use XP Professional with service pack 3. I get this error message every other time I try to log in to a protected wireless network security. I used to not get this message; but, now, it may be impossible, sometimes to call all wireless providers when I might only need for a short period or after hours service opening.

  In addition, it is my computer that requires the network password to be different, not the provider of wireless. A password is given to me who works for other users, but my computer won't let me use it.

  Hello

  I suggest you to visit these links and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/the-network-password-needs-to-be-40-bits-or-104/f3fdc3ee-CB40-4107-A632-082093dcdcb8

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/need-to-connect-to-home-wireless-network-Windows/5bf37a22-cc42-4a0f-9d15-83e780f00123

  It will be useful.

• Cannot access my IOGEAR BOSS with Vista home premium

  I have problems to access the directories on my external device with my new PC, and I hope you can help me.

  I just replaced my old HP Desktop running XP OS with a new DELL desktop which is under Vista Home Premium (32 bit) and now I can't access the device of utility of IOGEAR BOSS. I was able to access the external device with it and can be accessed with 2 other PC at home now. Can't seem to connect to the external device with this new system.

  What I can do:
  I am directly connected the BOSS and can access the internet via the BOSS. I also see the external device in my network. I can ping, tracert it. That's where! Just can't log in there!

  What I can't do
  Map a drive to the external device or authenticate in the unit. (When I try to access it, it prompts me for the ID/PW as it should, but he does not like the ID/PW I provided). I know that the PW & ID works calibrated it works on 2 other PC's connected on it.

  Steps to access the external device
  I am trying to access by taking the following measures:
  1 map a network drive
  2 assign the letter Z
  3 path: \\192.168.2.1\share
  4 pushes. me for ID & PW - admin\ *.
  5 ERROR Message: Logon FAILURE - NOTES: now shows the ID: Desktop\admin

  What I've done
  1 Contcted IOGEAR - checked all the settings of security, network and pwermission and reset the permissions of the external device to the original state. Did not work. They sent me to Ms & Dell.
  2. contacted Dell - did the same exact steps. They sent me Ms.

  Can anyone help?

  According to the site Web of IOGEAR (http://www.iogear.com/product/GNS1000/) it is only compatible with Windows® 98SE, 2000, ME, XP.  So so looking for a compatibility issue.  The update of the firmware is from March 2006, you might want to update the Firmware and see if that helps, but with compatibility issues, it's a scenario 'best effort '.

  Below you will find the IOGEAR support page, I hope that helps solve your problem.

  http://atenpbsr2.ATEN-USA.NET:8000/Inet_tech/form/us/index.asp

  Stephen Davies MS

• Control access to the network with ACS device

  Hi all!

  I currently have in place an Appliance, Cisco Secure ACS using Windows as main server authentication. Cisco Secure acts as a GANYMEDE server +. I have two groups defined in Cisco Secure: Netadmins and security ITD. Users of the Netadmins group need access to all switches and routers on the network. ITD security must only access async line 53 on a router 2611 for a band of a firewall and no other access to all network devices offline. How can I limit access to the Cisco Secure security ITD group to line 53 only?

  My current config on this router is:

  AAA new-model

  AAA authentication login netadmins group Ganymede + line

  connection ITDSEC authentication group Ganymede + line of AAA.

  RADIUS-server host 10.30.X.X

  RADIUS-server host 10.18.X.X

  key radius-server XXXXXXX

  line 53

  No exec

  authentication of the connection ITDSEC

  transport of entry all

  StopBits 1

  Speed 115200

  line vty 0 4

  exec-timeout 30 0

  login timeout 120 response

  login authentication netadmins

  but users in the ITD security can still access by vty and then reverse telnet to any asynchronous line on the router. In addition, security ITD always access any switch or router using telnet: what should be my setup on these devices? I do an ACS configuration?

  All other devices:

  AAA new-model

  AAA authentication login netadmins group Ganymede + line

  RADIUS-server host 10.30.X.X

  RADIUS-server host 10.18.X.X

  key radius-server XXXXXXX

  Line con 0

  password 7 141C015C5806

  login authentication netadmins

  line vty 0 4

  password 7 11020A 524310

  login authentication netadmins

  line vty 5 15

  password 7 11020A 524310

  login authentication netadmins

  Any help will be greatly appreciated.

  Hello

  In the security group, I would create a Restriction of access to IP network with an entry permit. Essentially to allow access to the single port on 2611 only.

  The AAA Client field is the name that you gave to the 2611 in the network config. Address will be * unless you want to restrict access to the ip or address. Port... never quite sure with async if the port value must be "async 53" or "line 53".

  If you look in the pass/fail for the nas-port attribute, you'll see what that T + sends to the ACS. This should help you know what to put in the NAR.

  Mounira

• How do I access the folder allowed with standard user?

  I have 2 accounts, one is standard, the other is the admin account.

  My PC has a permitted record that only allow admin to access.

  I always connect with the standard user and sometimes need to access these files from parmitted, but no authorization for the standard.

  So, every time I change the user access. It's too boring.

  I tried the command runas, but does not...

  Please give me some advice that can access the folder allowed with the standard user, if possible.

  Thank you

  I have 2 accounts, one is standard, the other is the admin account.

  My PC has a permitted file that allow only to admin for access to.

  Please give me some advice that can access the folder allowed with the standard user, if possible.

  You must change the permissions of this folder so that everyone has full access.

• Get the error message "error loading DLL communication" when trying to access Wireless Utility Setup with a LexMark impact S305 printer

  Original title: trying to access Wireless Utility Setup with a printer LexMark impact S305 on windows 7, can nybody help me?

  lxeapss: error loading DLL communication, I get this pop-up box several times trying to access Wireless Utility Setup with printer. I have tried, defrag, virus scan (vipre), stop, went to the Lexmark Web site to get the latest software downlaod for printer?

  Hello

  Click on the link below.

  http://support.Lexmark.com/index?page=content&ID=so4452&locale=en&UserLocale=en_US

  Hope this information helps.

• How to access the PDB (s) with multiple shared users?

  is it possible to access the PDB files with multiple shared users?

  Consider the scenario:

  I have two common user:-c# a PDB and c ##b:-PDBTEST

  I am facing problem:

  When I connect with the common user - c ##b, I am not able to see the table of PDBTEST created by connecting you with c# a.

  However, I have assigned rights in PDBTEST for both users c# a and c ##b.

  For the common c ##b user, is there another way, I can access PDBTEST?

  I'm following measures:

  Connect as sysdba

  1 > created two user c# a and c ##b (container = ALL)

  2 > common role granted with all privileges: c ##role (container = ALL)

  3 > assigned c ##role both user: c# a and c ##b (container = ALL)

  4 > created PDB: PDBTEST

  Changed session and containing value = PDBTEST

  5 > granted c ##role to two users: c# a and c ##b inside the PDBTEST

  6 > connect with c# a (and not as sysdba)

  Changed session and containing value = PDBTEST

  7 > table created and inserted record: TestTable

  8 > connection with c ##b (and not as sysdba)

  Changed session and containing value = PDBTEST

  I'm not able to access the record of "TestTable" after you connect with c ##b...

  Even more, if I connect with c# a, I can access inserted records.

  Help, please.

  Hi Big Boss,

  It has nothing to do with the PDB, it is just the works of oracle way - to query a table that belongs to another yo uhave to precede their schema name unless you do one of 2 things

  (1) create a synonym (public or private) for their purpose

  (2) use alter session set current_schema

  So in your case you'd be (both logged in as ##b c)

  (1) create synonym c# table_name #a.table_name;

  (2) alter session set current_schema = c# a;

  Now, if you say

  Select * from table_name as c ##b it will work.

  (1) is permanent

  (2) must be adjusted each time you connected

  I think you're confusing a pdb with a schema file.

  See you soon,.

  Rich

• Access movieclips of movieclip with a loop?

  There is a moviclip under the name of the instance of 'stage', inside, I have 4 'connect' moviclips - "log0", 'log1 ',... "log3."

  The thing is, I don't know how to access each of them with just a loop of the Interior. As if I had 1000 balls inside, it's stupid to write code by hand to each of them.

  My Code:

  for (var i: uint = 0; i < 4; i ++)

  {

  var x: int = stadium.this ["log" + i] .x;

  ...

  }

  then of course, it gives me an error, because the way it is written is incorrect.

  What is a solution for this? Thank you...
  

  use:

  for (var i: uint = 0; i<4;>

  {

  var xvar:int = stage ["log" + i] .x;

  ...

  }

• Cannot access or download updates with the automatic windows update...

  I get this message when I try to download or access automatic updates: "Windows Update cannot currently check for updates because the service is not running." You may have to restart your computer. "Nothing else is affected - I still have access to the internet and all of my programs, but knowing how important updates are that I really need to solve this problem. I tried many things, including restarting the service; a multitude of antivirus/malware programs - about you name nothing works... I use Vista Edition home premium 64 on a hp Pavilion dv4 PC laptop with a 500 GB hard drive. I have OTL.txt; extra newspapers ' s.txt and checkup.txt if it's of any help... I would really appreciate some help thank you.

  Hello

   
  • Did you of recent changes to the computer?
  • This all the troubleshooting steps you have tried so far?
  • What is the accurate or complete error message or the error code when the problem occurs?
  If you did not do the methods mentioned below you can do the same thing to see if that fixes the problem:
   
  Method 1:
  I suggest you open the Troubleshoot utility following the steps in the below link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
  Method 2:
  I suggest you to check if the automatic update feature is enabled or disabled. If it is set to Off you can activate it by setting to on. See the below link to do the same thing:
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-automatic-updating-on-or-off
   
  Method 3:
  You can access the below mentioned link and use the tool mentioned in the article to automatically reset the Windows Update components:
  http://support.Microsoft.com/kb/971058
   
  I hope this helps!

• WebView with NavigationPane

  I ran into a problem using WebView with of NavigationPane and reduced to a simple example that illustrates the problem.

  Basically, if I push a Page containing a WebView on a NavigationPane, when I close my App, the application does not close correctly. On the device, it closes, even if it sometimes delays. On the Simulator, I have to restart the simulator that I can run my app again.

  I reduced to this simple demonstration:

  1. I start a new empty project Cascades, let's call it NavEg2, and I put my "main.qml" to this:

  import bb.cascades 1.0
  NavigationPane {}
  {Page}
  {Of container
  layout: {DockLayout}
  Button {}
  objectName: "button click.
  text: 'news.ycombinator.com.
  }
  }
  }
  }

  2. I create a 'webpane.qml' in my 'active' folder that looks like this:

  import bb.cascades 1.0
  {Page}
  {Of container
  WebView {}
  URL: 'http://news.ycombinator.com'.
  }
  }
  }

  3. I have change my NavEg2.hpp to:

  #ifndef NavEg2_HPP_
  #define NavEg2_HPP_

  #include
  #include

  bb namespace {namespace stunts {class Application ;}}}

  Class NavEg2: public QObject
  {
  Q_OBJECT
  BB::Cascades:NavigationPane * root;
  public:
  NavEg2 (bb::cascades:Application * app);
  Virtual ~ NavEg2() {}
  Q_SLOT Sub buttonClicked();
  };

  #endif / * NavEg2_HPP_ * /.

  3. and I put my NavEg2.cpp on:

  #include "NavEg2.hpp".

  #include
  #include
  #include

  using namespace bb::cascades;

  NavEg2::NavEg2 (bb::cascades:Application * app)
  : QObject (app)
  {
  QmlDocument * qml = QmlDocument::create("asset:///main.qml").parent(this);
  root = qml-> createRootObject();
  Button * btn = root->findChild button ("click");
  Connect (btn, SIGNAL (clicked ()), this, SLOT (buttonClicked ()));
  App-> setScene (root);
  }

  Sub
  {NavEg2::buttonClicked()}
  QmlDocument * qml = QmlDocument::create("asset:///webpane.qml").parent(this);
  root-> push (qml->()) createRootObject;
  }

  Then I have my setup to build the Simulator-Debug value, build the project and create a run Configuration to run on the Simulator.

  When it runs on the Simulator, it works as expected, but when I close the application, it does not close. The icon will "grey" and I can not run the application again without having to restart the Simulator. If I click on the button - that is, if I do not open the WebView - then it closes very well. So I somehow does not use the WebView properly within the NavigationPane.

  When I run the present on the device Dev Alpha, it takes time for the App close (about 5 seconds), but it ends by closes. It reminds me to some WebView discussions there do something, or the device is just much more cruel to kill apps...

  Someone at - it ideas?

  Help much appreciated,
  Craig

  Hi Brian,.

  This is great news - had been worried I did something wrong. Thank you very much

  C

• The use of components bootstrap - access denied.

  Good Morning-

  I created a page that uses the built in components DW CC2015 Bootstrap.  Downloads page, but the bootsrap.css, the jquery and the bootstrap.js do not have.  It says access denied, or it could be a permission problem.  Is there something special at the server end which would prevent me to download these components?

  Then, I happened to get out of a button from the model "bootstrap" included with DW and replaced by another type.  Turns out she needed to generate a new updated bootstrap 3.3.4.css and a new 3.3.4 bootstrap js.  All I know is the blue and green buttons that I removed a path for success!   I was able to download without any error.