composing the package from another package

Similar Questions

• Satellite A100-549: BSOD after I used the recovery from another PC

  Hello.

  Had a few probs with my laptop and decided to recover it using another pc recovery disc.
  I get the laptop is a Toshiba a100-549. Unfortunately for some reason I can't disks that were originally with her.

  The opertaing system is Windows xp. The disks I got with a Vista.
  It loads OK but goes to a blue screen after 30 seconds and restarts. Is there a reason for this and can I do.

  I think I may need to get your hands on a good drive and load it on again.
  Someone at - it copies of drives for this laptop and able to send me their. I'll gladly pay for them...

  Colin

  Hello

  Don t user recovery drive to another PC, because it won't work.
  You can use a clean Windows OS disk or the Toshiba recovery disc.

  Why? Because the recovery disk contains an image. The image is a package containing a Windows OS, drivers and other software.
  If you want to use the recovery from another PC disk then all the drivers, tools and software distributed for this PC will be loaded on your Toshiba laptop.
  This can cause the BSOD!

  So if you n t have the Toshiba recovery disc then you should use MS Windows CD!
  Toshiba drivers can be downloaded from the Toshiba page!

• I have different bookmarks I want to keep on each computer, synchronization will delete the bookmarks on a single computer and replace the bookmarks from another computer in their place

  I have not yet used sync, but I sense it's going to be a problem if I do. I have different bookmarks I want to keep it on each computer. Sync will delete the bookmarks on a single computer and replace the bookmarks from another computer in their place? So I think that will erase the bookmarks on the second computer you configured to synchronize. Is there a way to merge bookmarks on every computer in the library of a bookmark that contains all bookmarks on both computers, so I'm not all bookmarks in sync?

  Just to be clear, this is something that we have commented several times in the forum, Firefox Sync adds everything that is already in the device for the account and pushes this info for the rest of the devices.

  So if you have 2 computers with data X and the other with the data from there, once you set up synchronization in both computers you will have X + Y at the same time.

  I hope that clarifies the doubts...

• Time capsule will not recognize the backup from another mac

  Time machine will not recognize the backup from another mac

  Time Machine will never find "another" Mac backups unless you've been backup that 'different' Mac on the same Capsule you have there.

  So, we need more information and to try to understand what it is that you are trying to accomplish. Please assume that we know nothing about what you could have done in the past... (since we don't have).

• Partition question - what would be the best way to increase its space and take part of the space from another partition

  Hello, I have my 500 GB SATA broken down into 3 partitions. Vista and 2 others. The problem is the process of using Partition Magic, Vista has been given only 30 GB, now its operation with 1-2 GB of free space. I want to know what would be the best way to increase its space and take part of the space from another partition, but I don't want to have to reinstall or do I want to lose all the data like photos, browser, documents and news ect.

  -Thank you

   

  You can read more details on "How to move from one partition to the other sapce without loss of data.

• Flash as2 cross subject to access the SWF from another server domain

  I have question cross-domain, how do I access the .swf from another swf file without using System.Security.allowDomain() in the swf file, which we are called.

  I use 2 domains and I have 2 files swf is a.com (a.swf) and another is of bcom (b.swf) I want to access the file the a.swf b.swf frames, if I use the system.Security.allowDomain() in b.swf file I can access executives. But without using this way I can access the file from another domain.

  Because I have a risk to change the file b.swf so I vant to go without changing the file b.swf is any other wey to access frames of the file the file a.swf b.swf. Please someone help me solve this problem.

  use a local executable (such as php) to load the b.swf and send it back to a.swf.  for example:

  loadSWF.php:

  <>

  $fh = fopen ("www.b.com/b.swf", "r");

  Header ("Content-type: application/x-shockwave-flash");

  fpassthru ($FH);

  ?>

  a.fla:

  var target_mc:MovieClip=this.createEmptyMovieClip("target_mc",this.getNextHighestDepth());

  target_mc.loadMovie ("loadSWF.php");

• Export the database from another pc - problem EXP-00056

  Hi all,
  
  I have a pc (called PC1) with installed Oracle11gR2. I want to export the database from another pc (called PC2) which is connect with PC1 with a LAN.
  I have connected PC2 to PC1 so:
  $ ssh oracle@IP_of_PC1
  
  and as the user oracle, I tried export then:
  index of the_user/the_pass exp = y subsidies forced is y = y line is my_dump.dmp log = my_log.log
  
  but he said to me:
  Export: Release 11.2.0.1.0 - Production on Tue 7 Sep 14:44:13 2010
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
  EXP-00056: ORACLE error 1034
  ORA-01034: ORACLE not available
  ORA-27101: shared memory realm does not exist
  Linux-x86_64 error: 2: no such file or directory
  EXP-00005: all authorized logon attempts failed
  EXP-00000: export completed unsuccessfully
  
  Why it does not work?
  
  Thank you much in advance.

  Run this and show me where exactly you run

  index italia/italia@dbSID exp = y subsidies forced is y = y line is dump070910italia.dmp

• Invoke the task from another process definition - is this possible

  Is it possible to invoke the task from another process definition?
  PD1 has task1
  PD2 has task2
  Call PD1.task1 from PD2.task2
  
  If possible, then what method API should I use.
  Thank you!

  Can you give me the right answer on this post :)

  -Kevin

• BlackBerry Smartphones to install the Firmware from another provider?

  My operator: Rogers

  Device: 8900

  Environment: BES Express 5.0.1

  I need to install Device Software 5.0 to synchronize my public folders wireless.

  Rogers only has not the 5.0 firmware updated. However, I found it for the 8900 on Vodafone UK downloads.

  No damage in this load?

  Operating system device provided are "released" by specific carriers once that they are certified and trained to their support technicians, but still, you are able to load any carrier the same model by following the instructions below.

  Some users might worry that they will void their warranty of device by loading an OS from another carrier. There is really nothing to fear. Read more information on it here:
  http://www.port3101.org/power-users/296-BlackBerry-OS-upgrade-including-betas-myths-dispelled.html

  Make a backup of your device first, using Desktop Manager > backup. Close the office at the end Manager.

  1. download the OS files to the PC then install on the PC by running (double click) the downloaded file.
  2. go in c:\program files Research in motion\apploader and delete the file named "vendor.xml."
  3. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.

• Microsoft Visual C++ Runtime Library. Run-time error. Only, I get this message when I try to download a form or file usually the pdf from another site.

  This application has requested the execution to terminate in an unusual way. For more information, contact the application support team.  This message comes on only when I try to download information from another site for example a leaflet or instructions from another site site usually in pdf format. Please can someone help?  Not too techinical please!

   

  Hello

  1. what web browser do you use?

  2 have had any changes made to the computer before the show?

  If you use Internet Explorer, please follow the steps in the link.

  http://support.Microsoft.com/kb/822521

• Oracle Database XE - apex on Windows 7 - the problem with the connection from another computer on Windows 7

  Hello

  I started with Oracle Database 11g, with apex XE, fact the upgrade of the Apex 4.2.6 and to develop a small Application.

  I wanted to connect to my computer (with step of database on this subject) from another computer Windows 7 B.

  So I put Firefox: //A:8080/apex but I have only received a timeout.

  Of course, on both computers there is a firewall of windows running, so I stopped on both systems, the firewall, but it is always the same.

  In Explorer windows running on computer B, I can see data from computer A and both computers are in the same home-net group. (Sorry for my bad English).

  Is there anyone who cann tell me how to get the connection running?

  Maybe I saw the info on this in the textbooks, if it is there, please give me a hint.

  Thank you very much

  William Kastner Salzburg

  Hello

  Check to see if that helps

  https://docs.Oracle.com/CD/E17781_01/install.112/e18803/TOC.htm#XEINW127

  Kind regards

  Jari

• How to import the class from another project in Jdeveloper 11.1.1.7

  I have an application with many projects. I create new project with the application and I want to import a class from another project with demand.

  But I am getting error ( found import.somePackge.someClass). I have red that I need to add it to the path of bulid project but no idea how.

  I use Jdeveloper 11.1.1.7

  Click the project--> project properties, dependencies, click here to change the Righ pencil icon and check the build output

• Loader will load the images from another server, but then we get error on Bitmap operation

  I develop an application that currently uses Loader to get the images to another server.  This should not work now because we are still waiting for the owner of that server to put a crossdomain in place file.  However, it works - sort of .

  Charger can load the images very well, without error.  But then the application has a feature that we are a great duplicate of the image to display in a sidebar, we do this in this way:

  var myBitmap:Bitmap = Bitmap (loader.content);

  and when will we get a Flash player 2122 security error, violation of sandbox.

  So although I hope that all this will fix itself when the crossdomain.xml file is set up, I am confused as to why we get only the sandbox error when we do a bitmap image, and not when we try to initially retrieve the image.

  (By the way: is there a better way to make a "copy" of an image loaded by a loader and change its width and height to display simultaneously in another part of the scene?)  "I have need to change its real dimensions - I just need to change its display width and height).

  Thank you!

  The sandbox allows you to view, not not editing from another server without a cross-domain.

  Therefore, when you try to load up, it loads, it 'read only' and gives you an error when you try to "change" by a new Bitmap out of it.

  This should resolve itself once crossdomain is in place.

  || EDIT |

  I just realized that I have to clarify my statement a bit more.

  When you load images from another server without a crossdomain, it only allows the load for display.  When you try to load data, it will fail.  It is because that data XML, or another type of data is editable by default, and the images are only visible by default.  As a result, the image fails when you try to convert it to an editable form.

• The default value based on the field from another table to a custom object

  I'm trying to set the default value to a field in the custom object to the value of a field of account. I tried the syntax 50 ways different and just don't get the case. The label for the account field displays the form of s/n, the integration of the tag is ltDBA_ACCT and it appears in the fx reports area as Account.Text_22.
  
  The field of custom object that I am triying update is also called s/n, which was originally the required field 'NAME '. The name of the table, account, should it be included? Do I need a function to the field?
  
  I've updated the external ID using the line with syntex < ID > ID (at least higher ID) so I know that it is possible to define a default value, but s / < n >, < ltDBA_ACCT >, 'account '. "" S/n "and so on are simply not working.
  
  If anyone knows how to get into what I would be really grateful for the help.

  OK, so if you default a field to the value of another object, you must use the JoinFieldValue function. I think you understand that, based on your original post, but I want to be sure you do.

  Then this won't work by default if the folder is created from the object that you want to join the because a default works in record creation and the ID must be available so that it works correctly. It will not work if you choose the record of the related object after that registration of the custom object is created. You can set the default after, but that does not meet your requirements.

  The syntax of the default are the following: JoinFieldValue (ref_record_type, foreign_key, field_name).

  In your case, ref_record_type is '', foreign_key is [] and field_name is ''. The best way is to determine what is the name of the field to create a new workflow for the account and use the Workflow Rule Condition expression builder to choose your field ("DBA") in the list. The value returned by the expression builder must be placed in the field_name variable in the function JoinFieldValue (minus the parentheses and quotes).

  Give it a shot and let me know how you do.
  Thom

• Call the method from another application

  Then. That is my question. Is it possible to call a method from another application, so I can get some data from this app?

  I know that I could also do this with persistent store, but I would like to do it this way.

  Thank you. I'll try with world events and TIME store.