Satellite A100-549: BSOD after I used the recovery from another PC

Similar Questions

• Satellite A100-906: Express player media use the reinstallation of the operating system

  Hello

  I use a Toshiba Satellite A100-906. I did NOT know about what express Media Player recovery cd's and I've never used it. But now I want to know what's the point of use.

  In any case I had to format my laptop and I have used the recovery cd. So now I've read that if I want to run the express media player I must first of all, insert the express media player cd stop button of my laptop and then use cd/dvd to start it.

  The problem is that I find in win xp with a Windows Media Player. Something go wrong with the format (using the recovery cd)? I had to first install the express media player? and then format and reinstall xp?

  If that's the problem, I, at this stage, to be able to install express media player without losing my data? I expect an answer. I hope you'll forgive my ignorance :).

  Best regards
  Harris

  P.S. when I boot from the media player recovery cd express I get three options 1) crash installation 2) uninstall 3) delete all partitions. So did I express media player installed?

  Hello

  So you're a bit confused. Am I wrong?
  If you want to start the Express media player you n t need to insert the CD of express media player!
  Express media player must be installed on the HARD drive!

  You have recovered the laptop with your recovery CD Toshiba but didn't install the Express media player since the EMP CD!
  This is false.

  Usually the Media Express Recovery CD drive must be run before performing the recovery from the recovery DVD-ROM products.
  Cannot install the Express media player after using the Toshiba Recovery CD!

  So first to run the CD of Express media player and then run the restore CD!

  If you wish, you can consult this useful document of Toshiba providing education
  How to find a laptop Expert Mode with 2 Partitions and Express Media Player?
  http://support.toshiba-tro.de/KB0/TSB58014O0008R01.htm

  hope I could help a little

• error code cooD11BA... lost all my audio after I used the recovery disc 4

  I lost all my audio after using the recovery disc (4). COOD11BA error code

  Hi fluffy444,

  Step 1: We recommend first to install the sound card driver and check the result.
  a. check the sound card manufacturer or system to download the driver.
  b. Once you have downloaded the correct driver for your windows, install successfully.
  c. restart the computer and check the result.

  Step 2: If the problem persists, try running the troubleshooter from his Microsoft and check the result
  a. see How to fix the sound problems in Windows XP
  b. click Microsoft hotfix and run the tool successfully.
  c. follow the instructions on the tool and check the result.

  See also: Troubleshooting Audio in Windows
  

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite Pro A200-16N: can I use the recovery CD after upgrade to Vista

  HII!

  IM thinking of upgrading to windows vista on my Satellite Pro A200-16N and I ran the pre-upgrade of windows vista from microsoft website and it says that my system will be in charge of windows vista so im ok about it.

  The problem is that if my laptop was to break or something like that at some point, will my recovery CD provided by toshiba to work always on the laptop with windows vista?
  They will return the laptop for windows xp or from my laptop has another operating system they will not work?

  Also...
  What's the deal with BIOS? : S
  I don't understand!
  If I were to upgrade to windows vista should I upgrade my BIOS before or after the upgrade to vista?
  As I download the new drivers before upgrading Yes?

  Thank you!

  The restore CD will of course work.
  The recovery CD will always set the laptop back to the factory settings. This means that the whole HARD drive will be formatted and the image of Toshiba will be installed.

  > What's the deal with BIOS? I put t understand!
  > If I were to upgrade to windows vista should I upgrade my BIOS before or after the upgrade to vista?
  To my knowledge, that this laptop was already shipped with Vista, so you need not update the BIOS if you want to reinstall Vista.

  Some series Satellite A200 needs a BIOS update if you want to use the XP.
  In such cases, it s advisable to upgrade the BIOS to version XP first, then install OS X.

  Best regards

• Re: Satellite Pro A210, stil does not start after you use the recovery disk

  Hi, my computer laptop girls stopped booting, I tried everything to fix this, but it seems to be on a loop.

  He runs the repair of your computer, but after a while, I get the message, this computer cannot repair this fault automatically (or something similar), there is also a message that says - if you have connected a camera or to this computer's portable music player, remove it now and restart.

  I tried to start in safe mode, safe mode with command prompt and last know good configuration but still no joy, so I eventually ran the recovery disc. Once it was finished, I was to square.

  Does anyone have an idea of what I can try next - other than to throw it out the nearest window.

  Thanks in advance.

  Hello

  Never heard talk of this error but sounds strange
  If I understood your first assignment; you were able to complete the installation of the OS from the recovery disc. Is this good?

  Well, in this case the HARD disk must be OK because the files were copied correctly

  I searched a bit in google and didn t have found a solution to 100%.
  Some have said that new OS install should solve this perhaps you could use clean up Windows Vista, Win XP disk

  You can also try to format the drive HARD integer first. Delete all partitions on the HARD drive, and then try again

  PS: You can check the HARD drive using the + Hitachi Drive Fitness Test. +
  Its free tool. You can find using google

• Satellite A100 (PSAARA) - I can not use the remote control

  I used Toshiba A100 PSAARA, but now I can not use the remote control to operate all things?

  Thank you!

  If the remote control suddenly stopped working trying to restore the operating system to an earlier time using System Restore tool.
  If this does not help please let us know.

• Satellite A100-787: drivers needed to use the control buttons and volume knob

  There should be a program that displays on the screen, the volume level when I change volume and another which allows me to use the game, front, back or stop buttons either with medial player JetAudio.

  Where can I get such a program?

  Are you using the original image of preinstalled Toshiba?
  The image of Toshiba Vista contains all the necessary drivers and utilities and using this OS everything should function.

  If you have installed other OS like XP XP drivers are needed.
  If I m not wrong not the notification of screen volume levels appears not in XP.

  Also if you want to use Toshiba command buttons you need to install the correct drivers as controls, common modules, etc.
  The proper installation order is necessary and important. That's why I recommend that you check the installation instructions on the download page of Toshiba!

  By the way; the control buttons are preconfigured and I don t think that it might be possible to use it with another players as IE Jetaudio.

• Satellite L300 - can't reinstall Vista using the recovery disk

  My daughters Satellite L300 gave problems that seem to be hard disk errors.
  I installed a new hard drive and tried to reinstall vista from the recovery of the product CD.
  Partitions are created successfully and then I get an error "C:\program files\adobe\acrobat restoration...". several times followed by etc

  "image restoration of error."

  "The file or directory is corrupted and unreadable."

  "Imagex error not to VISTA F:\06235XSP.svm Index 2 odd c:\!

  "Press a key to continue."

  And thye ned.

  All ideas

  Hello

  Hmm, looks like the laptop cannot restore the operating system from the recovery image
  To be honest I'm not very well why this error pops up but eventually it s m related to the new HARD drive installation.

  Perhaps, you can format the HARD drive again using a clean Microsoft Windows CD (Win XP, etc.).
  Boot from the CD of Win and format the HARD drive.
  Then go to the recovery disk, boot from the recovery disc and try reinstalling the operating system

  Maybe it would work

• Satellite A100 - messages of weird info during the recovery process

  This is the first time I tried to recover my Vista PC from Toshiba.

  During the recovery, I got this in CMD

  "C:\boot(something here) restore s Descriptor." seq. 26 - SACL rest. "
  "C:\SWStamp.txt s restoration Descriptor. SEQ 25 - list SACL will not go away.

  (1) is this normal?
  (2) what it means?
  (3) I even did a FULL format?

  Thanks a lot guys

  Hello

  During the recovery process, you will see some messages, that's nothing unusual
  Important is that the procedure does not stop but continues and after some time, the Win operating system should complete the installation
  Wait a bit and see if the procedure would end...

  If the procedure to hang himself, then start recovery and boot from the disc reocvery...

• Satellite Pro 4600: BSOD when I use the PCMCIA of Vodafone card

  I want to use UMTS on a Toshiba Satellite Pro 4600. I got a card PCMCIA of Vodafone and installed with all updates.

  But if I want to use UMTS, and that means launching the application and connect to Vodafone, Windows stops with a blue screen:
  DRIVER_IRQL_not_less_or_equal STOP 0 x 0... D1, 0 X 0... 00, 0 x 0... 02, 0 x 0... 00, 0 x 0... 00.

  I think that the assignment of IRQS is not so good: http://img96.imageshack.us/img96/7151/toshibamw0.jpg

  Hello

  Have you checked if this happens with every PCMCIA card?
  I noticed that the Vodafone card causes BSOD on some portable computers with CPU P4 s and activated the hyper-threading technology.
  http://support.toshiba-tro.de/KB0/FAQ5300W6000YR01.htm

  But there is also a problem with the firmware card Vodafone.
  An update of the firmware might help.

  Try to contact Vodafone support for new firmware and additional details

• Satellite A100 - 811 PSAA8E - can I use the function keys to control winamp?

  A similar problem:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26351

  My question is: can I use this buttons included the following buttons, back, stop, and pause to control winamp?
  My model is 811 A100 PSAA8E

  Thanks for any help!

  Try to activate the "Global Keys" in the preferences of-> Winamp Plugins section.

  By default, the keys are on:

  Rewind/FastForward = CTRL + LEFT and ARROW CTRL + RIGHT
  Previous track / next track = CTRL + HIGH and CTRL ARROWS

• Satellite A100-998: I want to use the Wlan - what do I need?

  Can you help me?
  I want to go wireless on the hoof.
  What do I need?
  I said I need some sort of plugin card with a sim card?
  Help, please.

  Thank you.

  Hi Michael

  It seems that you are really a beginner. Am I wrong?
  Laptop you seems to be a new-generation aircraft and in my opinion it should be already delivered with the internal wireless card.
  If you are not sure if you unit has inside wireless network card you can check this in the device under network adapters Manager.

  The wireless network card must be activated with the switch on the side of the laptop and with the FN + F8 key combination.
  In addition, the access point or router WLan is necessary to use wireless networks.

  Wireless technology is a long story. I recommend google a bit for more details.
  If you have trouble with the connection that you could post again.

  Good bye

• Satellite A100-153: Error Message appears during the recovery procedure

  Hello
  Please help me!

  I tried to recover my laptop with my original Toshiba recovery cd, but decompression 14% I got an error.., named:
  Windows - delayed write failed
  Windows was unable to save all the data for the file\Device\Harddisk\volume2\I386\OEMBIOS. Bl_. The data has been lost.
  This error can be caused by a failure of your computer hardware connection or a network. Please try to save this file elsewhere.

  So I don't know what to do...
  Is the problem that my hard drive is broken? but I don't think, because when I install with Windows XP Home Edition OEM I come up to 91% and then comes another error :((

  Please help me, anyone know what I can do?

  Please answer quickly... I need my phone tomorrow :*(

  Welcome, Tobias Erdmann

  Hello

  I guess you have you used original restore CD that was shipped with this laptop. That's why I put t thinks it is a CD problem but maybe with your HARD drive.
  Have you tried to format the whole HARD drive? Delete all partitions and format the HARD drive before installation

  If the OS install will not work or will divide in the middle of the procedure, then the material should be checked. The A100 is not very old unit and therefore the guarantee must be valid. If a new HARD drive is necessary you should get it for free.

  Good luck and please post if you know more details

• Satellite Pro 6100: BSOD after use of the 6000 SP recovery CD

  My 6000 Pro Satellite recently bitten the dust after several years of daily use. I just bought a used SP6100, after which I tried to use my SP6000 product recovery CD to do a reformat. Since when I Stop (obviously common) * 0x0000007B (0xF9680640, 0 x 0000034 etc.) error and blue screen on reboot.

  Is there a way to turn it? I had not thought about media recovery is specific to a single model (and the 6000 and 6100 are quite similar in terms of model anyway), but is this the case?

  Thank you very much for all the advice

  Cannot use the recovery CD on the different laptop models. Perhaps the two Satellite 6000 and 6100 are similar, BUT not even.
  Different drivers and chipset utilities are used on these books.
  The restore CD contains all drivers and utilities, and it seems that the blue screen error message appears because some applications and drivers are incompatible and unsupported on the second satellite!

  So if you want to use the Sat 6100 you should install the OS from the original CD of Microsoft and then visit Toshiba s driver and download the RIGHT and compatible drivers.

  Good luck

• Equium A100-338 has started to go very slow after using the recovery CD

  I used the recovery CD after my Equium A100-338 has started to go very slow, it still seems slower than it used to be.
  I haven't added anything to the computer from the CD recovery and verified the Manager tasks to see if I could spot anything suspicious.

  Statistics say, use 18-22% CPU, but the physical memory is about 68% is this normal or should it be less?

  Is there a list of standard processes I can check against mine to see if its doing something, it shouldn't be?

  Thank you

  Hello

  I think you feel that unity is a bit slow due to the high amount of different processes that run in the context of the BONE.

  The fact is that your laptop supports various features such as buttons FN, Toshiba control buttons, etc.
  All this has needs drivers.

  In addition, as I m not wrong the Norton Internet Security has been installed on your system.
  It s part of the image of Toshiba and this tool could affect the performance of the system.

  I have used in the past, but now changed to another application that doesn t need a lot of material resources.

  So if you want you can disable or delete some of the tools and utilities that are not important to you and could clean the system using a 3rd third party tool called CCleaner

  Welcome them