composition problem CURRENT AND TIME INIDICTOR

Similar Questions

• NEITHER 9207 reading current and voltage at the same time channels

  I have a cDAQ-9178 chassis USB-three cards NI 9217 RTD, three cards 9263 0 - 10V and one the output OR 9207 16 channels analog card. What I m trying with this kind of things, is to read all the analog input channels (information of transducer, temperature, pressure, etc.) and adjust my controls to process with the analog output channels.

  My problem at the moment is the following:

  When I create tasks with DAQmx VI:s, how to create a task that reads current and voltage on the 9207 channels at the same time?

  When I created a task for RTD-channels (16), a task for the outputs analog 0 - 10V (12), a task for the analog input 4-20mA (8) and a single task analog 0 - 10V input (8) I get an error-50103. I think it s because the tasks of current entry and voltagge are trying to use the same CAD at the same time and LabVIEW informs that "The specified resource is reserved. Tasks are to leave so that the analog output task starts first, then I merged all clusters of the error and the rest of the task are started by an order to current input-> input-> RTD input voltage. I get this error after the current enter task started and enter voltage task begins.

  Because I m new on the LabVIEW and stuck in that time, I wanted to try the forum to find answers. I tried to find if someone else was having the same kind of problem, but with a quick search, there was none. I m in a bit of hurry, so I apologize if West a subject with a happy for that and I missed too much according to me.

  Really, the best way to do it is just adding 8 channels of voltage at a task, then 8-channel current, somewhat like this:

  

  Then spread over different channels when you read later:

  

  It should run without error.  It always is multiplexed to sampling, but it will be much faster to create two separate tasks.  There will be between 2ms (mode high speed) and 52ms (mode high resolution) between each playback channels, but it will still be much faster than the permutation of the tasks.

• I need to know the file current date/time number stamp and the version of "spoolsv.exe" in Vista Home Premium 32-bit with SP2.

  I need to know the file current date/time number stamp and the version of "spoolsv.exe" in Vista Home Premium 32-bit with SP2. My spooler file got corrupted and I need to know what that the stamp of date/time on the latest version of the file: spoolsv.exe. I did a search on my hard drive and found 8 copies of the file with 7 different dates. I need to know which copy in my file C:\windows\system32\. I suspect that the problem was caused by some kind of malware. I think that some of the different versions on my machine of the initial installation of the Vista, SP1 and SP2. 3 copies that would explain. I tried all the suggestions in this forum and several others. I tried sfc/scannow and it simply replaces the corrupted file by another. I understand how works this file and a simple copy will do the trick if I knew that the file to use. I know that I don't want to go back to the first version of 2006.  BTW... my symptoms are all my printers have disappeared, and when I try to 'add a new printer' I get an error message saying that my spooler service does not work. When I opened my services window it shows that indeed, he is arrested, but I will not start because the description column contains only the code garbled machine indicating that the file is corrupted, or it may contain a virus. I had been using F-Prot until this virus got by and now I use AVG. I scanned my machine with several cleaning packages and it is is more infected, but I worry that from this corrupt file grow something. I know that the problem is not with my printers or drivers, because everyone on my home network can print on all of my printers. None of the people I know are on Vista 32 bit. They are all running System 7 or XP. I have XP, except that a few years ago I suffered from the "Syndrome of Pepsi" on my laptop and when I bought a new HP, it came with Vista.

  Version 6.0.6002.18294

  Day 17/08/2010

  Duration 14:11

  Duration may vary in different time zones.

• Distnoted and Time Machine problem

  Since the update to El Capitan, I had a real problem with the stability of the iMac.  From time to time - a couple of maybe days, three times a day, maybe - it would just freeze with BBOD on the login screen.  So, in general, after wake from sleep or screen saver.  Execution of SSH on the iMac would show distnoted clocked at > 380%; kill that process would be to release all.  He seemed to be repercussions for this purpose - for example, Time Machine, notifications would stop appearing - backups work (depending on the Console) would simply not be notified.

  Anyway, I actually had my TM drive disconnected for more than a week now, and the problem occurred.  So it seems to be one of the three possibilities:

  • bad interaction between distnoted and TM or processes
  • defective drive.  It's a mobile hard drive from Lacie P9223 (but I also have a second desktop Lacie drive that causes the same behavior).  Disk utility shows no problem with either of the readers.
  • bad driver/firmware.  Maybe... in light of the same manufacturer.  I tried the update of the LaCie firmware but it just does not recognize the plugged into readers - I assume that the update is for one or more different models.

  Short run out and buy another drive from a different manufacturer - and who knows how different the internal components are really - someone has an idea how I could continue this?  Everything was ok before the upgrade; I remember that with a previous version of OSX external drives popular of some manufacturers stopped working, I had this problem at the time.

  Determine if the same problems occur when running in "safe" mode: OS X El Capitan: start in safe mode

• Satellite M100-JG2 HotKey and date and time problem

  Hi all

  I'm not very good with computers, and I've had some problems for a while now. My laptop is almost three years, I don't know why I'm writing this after so long but anyway. I think they are called "keys" or "launchkeys", hopeyfully, you know what I mean, but anyway they do no more work. They worked for a while, but they do not work now. I went into the control panel and went into the 'Toshiba' orders and tried to change what does each control, but it still does not work. No one knows how to fix?

  Also, another problem that I had since I first laptop is my date and time are screwed up. If I put my 15:30 time, it works perfectly, until around 16:15, that when he goes back to 15:30 and go all the way up to 16:15 and continues in this cycle until I manually change the time. I had a few friends (no professional) to look at, but can not understand. When I start my laptop I go to settings in the start screen, try to change it was from there, but it keeps going during the cycle. If I click on the time and click on the tab "internet time" and say "update now", it updates, and then only time will work normally, but only until I turn off my laptop. Once I turn it on then next turn, it passes through this new cycle of 45 minutes. If anyone has had this problem or knows how to fix?

  I'm not very good at explaining, but I hope you guys can help! I appreciate it really :) Show!

  > I think they are called "keys" or "launchkeys", hopeyfully, you know what I mean, but anyway they do no more work. They worked for a while, but they do not work now. I went into the control panel and went into the 'Toshiba' orders and tried to change what does each control, but it still does not work. No one knows how to fix?

  The Toshiba Satellite M100. M100-JG2 seems to be a Canadian series laptop. I recommend you to visit the driver Toshiba Canada page and to download and reinstall the tool called controls, Toshiba HotKey Utility, touch and launch.

  http://support.Toshiba.ca/support/download/ln_byModel.asp

  > Also, another problem that I had since I first laptop is my date and time are screwed up. If I put my 15:30 time, it works perfectly, until around 16:15, that when he goes back to 15:30 and go all the way up to 16:15 and continues in this cycle until I manually change the time. I had a few friends (no professional) to look at, but can not understand. When I start my laptop I go to settings in the start screen, try to change it was from there, but it keeps going during the cycle. If I click on the time and click on the tab "internet time" and say "update now", it updates, and then only time will work normally, but only until I turn off my laptop. Once I turn it on then next turn, it passes through this new cycle of 45 minutes. If anyone has had this problem or knows how to fix?

  I think that you have changed the date and time in the BIOS. Is this good?
  If not, change it and don t forget to save the changes.

  In Control Panel--> Date and time--> time tab Internet, please uncheck the auto sync with the internet time server.
  In the other, called tab time zone please choose the right time zone and activate the tick to the option called automatically adjust the clock for an advance of changes

  See you soon

• Problems with the date and time - have to reset the date & time on reboot

  original title: problems with the date and time

  Whenever I turn on my computer (Windows XP 2002) I click on F2.  Then I re - set the date and time it occurred in January 2006 1 h every time I have turn off the computer.  Can someone tell me what I need to do?

  You need to replace the battery in time clock (RTC) real of your computer.  It can also be called the CMOS or BIOS battery.

  Many computers, this battery is an inexpensive CR2032 button available in almost every pharmacy corner.  There are, however, some computers (especially laptops) that require a different (and probably more expensive) battery.

  Whatever the expense, almost all of these batteries are easy to replace.

  To get help, post back with the brand and model of your computer.

• Time problems Syncro and hp Advisor does not.

  Well, I had problems lately, and one of them goes down time syncro. I tried to make the prompt for syncro and do not work.  My computer is a HPa630f.  I keep getting some time is not well actually my time shows that it is.

  Second prob is just started coming up with the hp Advisor

  event name clr203 prob

  Siganture04 mscorlib

  signature prob system. I.O.FileLoadException

  Event Viewer.

  Activation context generation failed for "C:\Program Files (x 86) \Hewlett-Packard\HP. Load Assembly Microsoft.VC90.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.30729.4148' is not found. Please use sxstrace.exe for detailed diagnosis.

  Application

  source of event side by side 33 id

  Hello

  Flymar01 wrote:

  Mine is HP a6530f.  I looked on my computer and it was on the list.  Mine is vista 64.  Yes internet time sorry.  I have another question which is supported right now as well.  Which would not interfere with it?

  Try a different time server. Take a read of the present. The hyperlink goes to a well written explanation of how to deal with issues of internet time.

  Kind regards
  ERICO

• My problem is setting in my office date and time.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone! every time I have to connect to my laptop, an error message will appear. I need to check my date and time. and when I check, it does not. I tried manually reseting but it did not work when I restart my computer. Also in my date & time zone there is no specific place which may work for me. Theres no philippines listed. And I tried the update at the time of the internet and the answer is successful. but when I re start my computer is the same problem I met.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Chances are good that the CMOS battery that powers the clock when the computer is shut down has not or it is so low, that it is working properly.  Try to replace the battery and see if that solves the problem with the clock not the hold time (and this willl happen if you use the time synchronization because when the power is off, the clock needs the battery to keep read time).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Passport problems of blackBerry with date and time on the passport of Blackberry

  Hello!
  I have problems with my passport for Blackberry.
  For the couple in a day time, it changes itself. So my hub doesn't work, I get no new messages, I can't send messages! The last time I did correct settings did not help. If everything is correct or hub or messages do not work. I tried to make different adjustments, tried to restart the hub, tried to restart the phone. but it does not work. I really need your help because I can't use my phone and nobody can connect with me.
  I didn't drop the phone. I know that these problems are related to the date and time because since the first problem with hub and messages has occurred, I saw that the date and time were bad, changed to correct and everything went well. I don't understand why he doesn't now. Can you tell me what to do?
  OS 10.3.2.2836
  1 January, I received this phone and it worked allright until some of the OS updates, can't tell which exactly because I have auto update.

  For those who have the same problem: I deleted the contact of my mother on the phone. I deleted the messages displayed as January 27, then I added my mother to local contacts and new messages started coming

• Facing problem with date and time.

  * - Original title - BIOS

  Mr President.

  I have Compaq CQ2100IL Desktop pc for awhile I was faced with the problem of the date and time, so I posted this question to Microsoft, so they gave me a solution change my CMOS battery, so I did it, but despite this I get this error again then I tried and got answer to update my BIOS , I tried to find a version update on the HP site but did not find, so please help me in this matter.

  Hi Vikas,

  You can contact HP here: http://h10025.www1.hp.com/ewfrf/wc/contacthp?cc=us&dlc=en&lc=en&os=4062&product=3890751&sw_lang=

  Warning in the BIOS: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Problem with the registration date and time: only one date is recorded

  Hello community,

  I have the following problem:

  I automatically stores the datetime values in a date column "changed_on", whenever a user saves a form.

  Unfortunately, when I show this value in a form or report, only the correct date is shown. Still, the time is 00:00. There is no time in the database value, too.

  

  Whenever a user clicks the save button in my form, the value of "changed_on" is generated by a calculation that returns "sysdate" (see image below).

  I think I tried everything now, but I can't understand how to record the date and time correctly. I already tried the format for the changed_on field mask to my preferred format, but it does nothing (jj. MM YYYY HH24).

  How can I automatically record the date and time?

  You need two things.

  1. put the mask of the P3_CHANGED_ON element to JJ. MM YYYY HH24

  2. change your source of calculation to

  TO_CHAR (sysdate, ' DD.) MM YYYY HH24 ')

  In this way, what holds the element and implicit conversion happens when recording records will match.

  Thank you

  -Jorge

• Hey, I just wanted to buy a package complete apps for creative cloud every time that I enter the stage at the confirmation stage its tells me there is a problem procedure and I need to contact customer service

  Hey, I just wanted to buy a package complete apps for creative cloud every time that I enter the stage at the confirmation stage its tells me there is a problem procedure and I need to contact customer service

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If he continues to not try to use a different browser.

• Hello! I use a PC and have problems loading my homepage of Muse. First of all, I made one with the address "nordensstjarnor" and updated several times without any problems. And once, I couldn't download on 'nordensstjarnor' any longer. Don't know why, s

  Hello! I use a PC and have problems loading my homepage of Muse. First of all, I made one with the address "nordensstjarnor" and updated several times without any problems. And once, I couldn't download on 'nordensstjarnor' any longer. Don't know why, when he got the address "nordensstjrnor". That me ok at first, but now I really need to give the first address once again, "nordensstjarnor". But when I try, the alternative of the site of ' publish on ' old isn't here. And if I try to create a new one, but with the old URL, the box turns red. What can I do?

  The reason why you cannot change nordensstjarnor.businesscatalyst.com is because a different Adobe ID is used for the publication of this site.

  t * [email protected] is used for the publication of nordensstjarnor.businesscatalyst.com

  t s. * [email protected] is used for the publication of nordensstjarnorindex.businesscatalyst.com

  You must make sure that Adobe ID is used in account publish, so that you can see a list of the websites published under this account. Go in Edition > Preferences > publish on Business Catalyst > publish with accounts

  You can pass the accounts for you can also make changes to the sites.

  Thank you

  Sanjit

• Trying to open the message box appears 'lightroom has encountered an error when reading the preview cache and needs to stop smoking' Lightroom "Lightroom will try to solve this problem, the next time that it launches" OK when you press closed Lightroom an

  Trying to open 5 Lightroom, a message appears 'Lightroom has encountered an error when reading the preview cache and needs to quit' "Lightroom will attempt to solve this problem, the next time he throws" when OK key Lightroom quit unexpectedly and the computer returns to the office.  This persisted for 2 days and it has not set itself.  help please.

  Click OK close Lightroom.

  You must manually go to the location of your Lightroom by Finder catalogue / file Explorer and get rid of the Previews.lrdata folder

  By default, the location would be in Pictures\Lightroom folder

• I get a message saying Lightroom met an erorr when reading the preview cache and need to stop smoking. Then told that Lightroom will try to resolve thei problem the next time it starts. Never does. Tried to uninstall and reinstall but no good.

  I get a message saying Lightroom met an erorr when reading the preview cache and need to stop smoking. Then told that Lightroom will try to solve the problem the next time it starts. Never tried to uninstall and reinstall but no good.

  Sound familiar to anyone?

  Hello

  Please go to the save location of the Lightroom Catalog and here please delete the Lightroom Catalog Previews.lrdata folder.

  Now please open Lightroom and check if it works.

  Please let us know if it helps.

  Kind regards

  Tanuj Sandal