Loop Windows error recovery

Similar Questions

• Stuck in the loop "Windows Error Recovery".

  Whenever I turn on my Gateway laptop, I get "Windows Error Recovery" screen.  Any choice I chose, I only end up return to this screen.  On the advice of a professional, I dug my recovery dvd (created using my computer laptop shortly after purchase) and tried to use it.  I tried different ways to use the restore disc but cannot find one that works (by pressing 'R', F8, F12, F10, Alt F10).  I know I must be missing something... How to use the restore disc?

  Thanks for your help!

  KZ

  Hello

  boot you from it

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  change the boot order it do dvd drive 1 in trunk thern and order to boot from the recovery disc

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Question - loop on Satellite L350-170 Windows error recovery

  Toshiba Satellite L350-170 - Intel Pentium Dual Core T3200 2.00 GHz, 2 GB, 250 GB, 17 "TFT, DVDSM, VHP

  My wife bought three weeks ago. Use of the lamp. Everything works fine, until a dialogue of "Startup Repair" appeared. Since then, the machine starts.

  Machine goes into "Windows Error Recovery" immediately after the Toshiba start screen and has the following options;
  (1) run the Startup Repair tool
  (2) start Windows normally

  Option 2 results in a blank screen and finally goes back to the screen "Windows Error Recovery".

  Option 1 has the reboot dialog box;

  "Your computer was unable to start.
  Startup Repair is checking your system for problems... »

  At this point, the Toshiba laptop enters an endless loop.

  So what I do now? There is no disc came with the laptop, so I can't reinstall the operating system. The dealer (Comet) is less useful and don't know no refund or Exchange for a defective product.

  Can someone please!

  Try this:

  Press F8 immediately after that the laptop has been turned on.
  Then choose the first option called fix my computer.
  Then a new window should open and there you can choose the option called Toshiba recovery.

  Please note then this procedure would start the Toshiba HDD recovery and the BONE to relocate again. This would be to format the whole HARD drive and set the OS to the factory settings.

  In my eyes, you can use this procedure for recovery of HARD drive, or you can try to reinstall the OS using the Toshiba recovery disc.
  Both lead to the same results

  Good bye

• Vista 64 Windows - stuck in the windows error recovery loop. don't go to safe mode, does not recognize the recovery disc.

  Gateway dx 4200-ub001a

  quadruple-heart, 6 GB of ram. No hardware problem, that I can find.
  restarts just constant return to the windows error recovery screen.
  get a blue screen saying change the bios if it continues to happen, but nothing specific. Impossible to get
  BIOS screens in any case. nothing takes me out of the loop, I can understand.

  See if you can load (using F10 or F12) a free Diagnostics, bootable from here: http://www.carrona.org/initdiag.html

  If this does not work, then try F2 to enter the BIOS.
  Together, the boot order so that the CD/DVD is first, then try to run the diagnostics bootable from here and free: http://www.carrona.org/initdiag.htmlf

  If this does not work, then you need to try another CD/DVD drive (or take it to a shop for an estimate).

  Good luck!

• Error in loop Window Vista recovery

  I have a Dell PC OptiPlex 960 with Windows Vista Ultima. He has been given to us and we are seniors. They do not give us the password. We have so bee you try to reset the password for administrators, but we managed. We have no disc reset, and because of our low income, fixed income, we are unable to afford it.  After reboot, the system keeps coming up "Windows error recovery", we also want to upgrade the system to Windows Vista Ultimate Edition of Windows 10. Can someone help us?

  With any pc, the pc password can be removed by turning the computer off, remove the battery Mo,

  wait 10 minutes or so, replace the battery (usually a good time to replace the battery with one)

  a new)... Once the pc starts, enter in the BIOS (F2) faucet key.in BIOS, reset the date and time, the value

  for any additional card, output tab, set the boot priority, save & exit BIOS... What is a desktop computer

  Other PC work the same way, read the owners mauall if it is different...

  In addition, vista OS installed by default, usually will have the windows hardware 10 does, even

  Windows 8 and 8.1 don't work, 7 speaks of the best upgrade, run the utilities before compatibility...

  Get here.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

• Windows error recovery is completely locked (Vista)

  Earlier today, I wanted to install Windows 7 next to Vista so I decided to partition my system. I used the free version of the Paragon partition system. However, he seemed to be taking muuuuch longer that it should have - on the scale of 3 hours and increasing every second. So, I decided to cancel the partition which caused my whole damaged hard disk. Now, whenever I start, I am taken to the Windows error recovery however, and I can't do ANYTHING. I can't move the arrow keys to try to use an old restore point, and I'm just helpless to see the tick of limitation in time down while trying to boot Windows causing just a reboot loop and go to the same screen.

  I can't get into the BIOS and I can't have mode secured by conventional means. I downloaded a file of recovery and I burned it to a dvd. http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/ I do not know if it will work, but since I can't get into the BIOS I can't put my CD/DVD drive as the first when starting up.

  It seems fitting that I have no options here. In addition, I don't have the installation disc more.

  If you can not get into Bios to change the boot order, an installation disc will not help, will it?

  Contact your computer manufacturer and ask if you have a recovery Partition.

  It normally takes F10 or F11 to launch it to the market.

  And try Paragon support because your use of it seems to be what started the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows error recovery, "load failed with error 1009 (STHIVE #0).

  Hello world

  This problem occurred to me yesterday. When I started windows, there is here a dialog box saying "Windows Error Recovery" and below, is

  "Unable to start Windows. A recent hardware or software change might be the cause. "(I don't remember changing anything)

  "If windows files have been damaged or misconfigured, startup can help diagnose and fix the problem. If the power was interrupted during startup, choose Start Windows normally. »

  There are two options it saying

  -Launch Startup Repair tool

  -Start Windows normally

  When I clicked on start Windows normally, seems that Microsoft Corporation loading bar never ends

  When I clicked launch a startup repair... A box named "Startup Repair" appeared, saying "Startup Repair is checking your system for problems..." "But after that, it seems that nothing had changed. When I opened my laptop once again, he went to the dialog box saying "Windows Error Recovery" again.

  What should I do now?

  My laptop is "Compaq Presario V3500"

  Also, I see that this tread on Compaq.com http://support.hp.com/us-en/document/c01612373 is it safe to do? I ' ts ok for me to lose all my files just to repair this laptop...

• Equium P300-16 t - Windows error recovery screen

  It started with not to connect to the internet and to say that something did not launch. I looked on the forum and he said press F8 chose the first option (to fix your computer), I did.

  Then he took me to a with option 2 windows error recovery
  -Launch Startup Repair (when press screen becomes black for 1 second, then goes back to the same screen)
  -Start windown normally (when press turns the computer on and back on bringing me back to the same screen)

  Now when I turn it on charges it takes me to the windows error recovery screen. And no matter what I push on I always end there.

  Hope someone can be useful

  Hello

  Looks like something was wrong with the recovery process and now Windows may start t. Maybe something messed with the registry or a few important Windows files, so I think that the only option to get rid of it using the Toshiba recovery disc. It will wipe the entire HARD disk and restore the factory settings, normally it should work.

  Just so enter the Toshiba Recovery disk and follow the instructions on the screen. Windows will be reinstalled, and you get back to factory settings. :)

• Re: Satellite A500 - Windows error recovery

  I have a problem with my laptop

  When I restart my laptop, it tends to be stuck on this windows error recovery screen. It gives me two options
  (1) Lauch Startup Repair
  (2) start Windows normally

  Tried both, it turns off, reboots that it ends on the same screen over and over again. Tried to access it via safe mode, nothing helps. tried to fix it through windows disk 7, did not work. tried last good configuration, not good either.

  It's the screen that I always end up and it does not go further.
  http://I585.Photobucket.com/albums/ss297/fobssquad/P1010014.jpg

  Please can someone show me a few guidelines as to how can I do to fix this problem. I'm a freshman in College, I have no money to take it to a professional. That's why I try to fix it myself as I have urgent need.

  Thank you in advance.

  Hello

  Hmm, not easy, but in my opinion it s something wrong with properly installed Windows OS and HDD recovery doesn't work

  You have the Toshiba Recovery disk?
  If Yes, you can use it to restore the original settings windows. Just boot from that disk and follow the instructions on the screen, everything that s! :)

• When I turn on my blue screen laptop appear after windows error recovery windows also appear

  When I turn on my laptop, a blue screen appears after windows error recovery windows appear also... ask in safe mode are normal windows startup?... what I can do... is a problem on my system?... Please help me...

  Hello

  ·         What operating system is installed on the computer?

  ·         What are the error messages that are displayed on the blue screen?

  ·         Did you make any changes before the show?

  In the recovery menu, select Safe mode and check if you can connect?

  You can also try to restore the system in safe mode.

  If you are able to boot to the desktop in safe mode, then I suggest you put the computer to boot in safe mode and check if it helps:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Reference: resolution in Windows 7 stop errors (blue screen)

• PC happens in windows error recovery

  I looked for further discussions but not find answers for help. PC is windows error recovery message. I was able to boot in safe mode and then tried a system restore. Once ran that I found myself with an empty screen, it restarted and went immediately to the same error message. Now an option if safe mode or normal.it appears.to.start booting.and then just be going empty screen or error message. I do not have the original vista disc and do not have access to one. Any other suggestions?

  If you have problems locking it with the disk, let us know.

  You can make a tool of startup repair, System Restore, etc from a disk of Vista from Microsoft:

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  But to do a repair upgrade installation, Vista runs in Normal Mode not Safe Mode.

  See you soon.

• Windows error recovery. Windows could not start... _

  My Dell laptop I have from 10th July indicates the following:

  Windows error recovery

  Windows could not start.  A recent hardware or software change might be the cause.

  If windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem.  If the power was interrupted during startup, chose to start windows normall7

  Start the reboot system (recommended)

  Start Windows normally

  The two options to return to the same screen.

  I tried the menu under the F keys, but all options listed do not seem to do anything.  I talked to Dell who ran a diagnostic test on the portable equipment and everything was ok.  They wanted then £70 the issue above which I am unhappy that have not had the laptop for a year yet!

  I would be very grateful if you could help!

  Thank you

  Mark

  Hello mtb123,

  1. have you tried the steps suggested by Srinivas R in the previous post to make a startup on your computer repair using the Windows installation disc?

  2. you remember what changes you made to the computer before you start this error?

  I suggest that you access the system recovery options using a Windows Vista installation disc and do a startup repair and if this fails, you can do a restore of the system from the Windows recovery environment.

  You can see the previous post of Srinivas R to verify the information on the system restore.

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Windows error recovery vista

  I have an Acer Aspire 6929g with Vista.

  Last night I turned on my laptop and I forgot about it, it was not plugged in then the battery is dead.
  Today, I turned it on and windows error recovery is there.
  I tried to launch launch repair but also to start windows normally. Both options present some loading screens and then resumed on windows error reappears.
  I followed another forum and typed F8 to access the menu restart to safe mode options.
  I tried all the safe mode and a few other options on this screen, but I finally get back to windows error recovery.
  I have not all disks to restart.
  Any other suggestions?
  The laptop is 3 years old.

  Hello

  With an Acer you would normally press Alt + F10 to start recovery to factory settings process, if no disk came with it for purchase.

  And a password for this process, it is normally of six zeros.

  Be warned; all data will be lost when reinstalling.

  See you soon.

• computer keeps coming back to Windows Error Recovery

  Original title: my computer will not exceed Windows Error Recovery, it just goes back to the same page

  I have a Dell Inspiron 531, Windows Vista, it was closed and when it is restarted it went to Windows error recovery. If I select start windows normally or start the repair, it cancels the same screen.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Unable to boot Windows Vista past the Windows Error Recovery

  original title: girl in trouble

  Hello, my daughter has a DELL studio with Vista Home Premium 32 bit SP1, the problem is that it will not pass the Windows error recovery 'window' repair statup display a message "Startup Repair cannot repair this computer automatically" and gives them the following problem details:
  Signature of the problem
  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6001.18111.6.0.6001.18000
  03:6 problem signature
  Signature of the 04:2228258 problem
  Signature of the problem 05: NoRootCause
  Signature of the 06 problem: CorruptVolume
  Signature of the problem 07:0
  Signature of issue 08: 1
  Signature of the problem 09: Chkdsk
  Signature of the problem 10:0
  OS version: 6.0.6001.2.1.0.256.1
  Locale ID: 1033

  She has all his docs school and work on it and I'm trying to save them, here, that's all I tried to do:

  I tried to boot using the DVD included with the computer, reinstall after pressing f12 to boot from the cd/dvd, it gave me the ability to "Repair computer" but is not. In fact I are entered in the comand prompt and ran a chkdsk/f with no result. I tried all the other recovery, repair choice but given the result.

  If I press f8 and select Safe mode, it don't go there but will take me to the same window "Windows Error Recovery".

  The 'install' mode has the 'upgrade' off function and it is said that it works only with windows.
  I can't do a clean reinstall without losing my daughter work... any suggestions?

  Luis

  Luis

  Hello

  Either yourself or a store should remove the HDD and it slave in a system that works to see if the data can be recovered from him. The error message indicates a corrupt installation volume rarely, this can be fixed without deletion and recreation of the volume (and doing so will lose all data currently on the disk). Once the data was retrieved from the Vista installation will have to be redone from scratch.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org