Computer broken or fixable?
Recently, my computer was crashing and I can not even access my desktop, it is stuck when I start my computer, it goes to a big command console that says Intel undi, pxe-2.0 (build 083)
Copyright (c) 1997-2000 Intel corporation for atheros pcie Ethernet controller v2.1.1.5(03/15/13 Qualcomm) check the cable connection! Pre - m0f: exit pxe ROM. Reboot and select proper boot device or insert boot media in selected boot device and press a key
How this can be done?
By checking the manufacturer's web page for instructions on how to begin the process of restoration of the factory.
Tags: Windows
Similar Questions
-
I can ' use my computer (broken screen)
Hello evrybody
I have a complicated proplem
my laptop screen is broken and I use it with an external screen but my proplem now that I changed accedently output VGA option and I can't get it back on the screen outside as I don't see what happens when I press a key, I tried to do something for a long time, but without benefit
So I hope you can help me
Thank you very much
Hello. You don't mention what model is your laptop. On my laptop (satellite a50-111), you can switch between mode LCD and VGA by holding the Fn key and repeatedly pressing F5. Good luck.
-
Mechanism on Docking Station advanced eject HP computer broken
Hi, I don't really know where to put this post so I try my luck here. I have for some time, HP Advanced Docking Station. Warranty is over and the eject mechanism is broken. I don't really know the right terminology, so excuse my English in the present.
One of the nozzles ensure that the laptop is stable in its place is broken and it does not come to its default position"after having ejected laptop.
Fot the comparison here is the default position of 'beak' or whatever his name:
I found that there is a spring inside which is return correct position "beak" to him. Unfortunately the plastic on which was leaning on the spring is broken:
I see clearly what is wrong. And now, my questions: where I get this as a spare? What is the correct name of this component? Is there a product or some ID number to find online?
Thank you all for your replies,
Miroslav
That's what I was trying to tell you. HP doesn't sell replacement parts for a docking station. Your only option is to try to find a dock broke very cheap on ebay (they invented sometimes) or buy one that works, but does not have an adapter sector or something, so it will at little cost. If you can provide me the complete part number of the dock that I can probably point you to the auction for a dock $ 15-$ 30, which is much less than any spare part HP for anything whatsoever.
-
My computer broken repair shop!
News of the computer: HP G62X - 400 CTO
Operating system: Win7 (64 bit)
Story: For several months, my computer had display problems. He left that anytime I moved the monitor, the screen would flicker on during a few seconds. After a few months, it would display only if the monitor has been completely opened. I disassembled the computer several times, and reconnect the monitor cable to the socket on the motherboard. This should solve the problem for a few days at a time, but the problem came back every time. I finally decided to take the computer in a store when he so the screen shows nothing. Specifically, the backlight was on but there is no content that is displayed. The shop told me they would set probably later that day, maybe the next. After three days, I called them and they said they fixed the monitor but couldn't get the computer to boot and suspect that they damaged the power button. I was told that it would be more than a few days. 9 days, zero calls explaining the delay and a complaint with the BBB, I finally just went and got my computer from them. The tech/owner told me that they had obtained the new button / this morning and installed, but still could not the computer to boot. I told him I was taking it, how much he complained that I had not given a chance to fix it. Keep in mind, they had 12 days to solve a problem, I was told would take less than a day to be fixed at this stage. I took at another store recommended for me and technology, he has tried to turn on and told me that there is a motherboard error and the lights are give me a code. I thanked and it took a third shop (reputable BBB certified) to confirm. This store also said that there is a mistake on the motherboard.
When I push the button of power, power, WiFi/F12 and tray dvd light that all simultaneously Flash once, pause for 10 seconds, then all three flashing. I interpret this as a code flash flash, repeated every 10 seconds approximately. My research for HP codes flash leads me to believe that this is the code for a CPU failure. Can someone in the know please confirm this for me? I need to have my facts straight when I say the store owner that he owes me a new computer.
Also, how can I retrieve my equipment Sheet? The HP site says that since it's a CTO model number they do not follow the recordings of it (which I find impossible to believe). I have no reason to assume the disc is not intact, is there a file I can pull up on it to see the exact specifications of my computer? The reason I ask is that I paid extra for the enhanced graphics, etc.. I'm not going to accept a replacement of the bottom line for my computer.
The a blink code indicates he can not read the processor correctly. However, it could be a CPU socket on the motherboard failure, a faulty processor or a FSB failed depending on the architecture. There is no way to say 100% with blink code, but it's usually the processor in my experience.
If you bought it online, you should be able to access the invoice for your order and it must have the detailed options that have been selected.
Go to http://goo.gl/hOm3 and select a category, as if you were going to buy something.
Once the real shopping site of the charges, sign in or sign up in the upper part. Click on this link.
Sign in using the same account, with which he was ordained.
Click on the order status at the top.
Sign in using the same credentials.
If it has been more than 90 days, it shows nothing. Click the link to display the orders of more than 90 days.
Click on the appropriate order number. Here, it should list everything that was ordered with as well as the price. -
My desktop came with Vista already installed, but after a total crash, I need to start over. I have no OS on it right now, but I have the official Windows product key. Can I use this product key to get a physical boot disk?
Hello
There is no free and legal Vista download
Here are the different ways to reinstall vista
Microsoft provides no DVD of vista for Dell brand name computers Acer etc.
Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer
Ask them of the exact key sequence
or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
http://www.theeldergeek.com/Vista/vista_clean_installation.html
How to replace Microsoft software or hardware, order service packs and replace product manuals
-
How can I download creative cloud on a second computer. My first computer broken
My main computer has been trampled and the screen looks something vomit top. How can I download my creative cloud on a backup computer
Just install the application of cc on your 2nd computer desktop, https://creative.adobe.com/products/creative-cloud
and use it to install your programs of cc.
-
How to disable if your computer broken?
I have photoshop installed on my laptop, but it broke and I can not turn off so I can install it on my new laptop. Is there anyway that I can disable?
Call their customer service. That's the way to address the issues of activation.
-Christmas
-
Hello
Unfortunately, my computer is broken (SSID), so I can't disable the version of photoshop elements installed on it. I try to install photoshop on another computer and of course, she said something like: 'turn off first. But what if I don't have access to the computer broken? (The second license you get doesn't help: it is installed on another computer belonging to another Member of the family).
Help appreciated!
Kind regards!
(Excuse the language mistakes - no native speaker)
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <==>==> NOTE DAYS AND TIME
Serial number and activation support (non - CC)
-
How can I recover data hard drive XP in Visa 64 bit computer?
Other than using a hard drive in XP as a slave in a computer 64 bit Vista, how can I recover the files in the drive XP given that the motherboard of the computer broken XP?
Hi, amymay5!
You can retrieve any information on the disk hard until you connect it to a mother's work. So, if you have a Vista computer, the option to connect as a slave is easier to achieve your goal.
Good luck!
-
Computer crashed and lost the Boot Error 1713 menu
original title: computer broken start menu lost and Micorsoft Word 2007 Error 1713 when I try to reinstall word. System restore system maintenance proven unable to complete the restore process
Here is information on the error 1713 and the installation of Office that can be useful:http://support.microsoft.com/kb/926279.
If this does not work, please transfer your question in the forum Office Word:http://social.answers.microsoft.com/Forums/en-US/officeinstall/threads , where experts in Word will be happy to help you.
If you want to address the problem of the restoration of the system after that another problem is solved, post here and we'll see what we can do.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
new computer trying to re-download student edition program not found email with serial number
This is the old number computer broken so obtained, it replaced. Now Im having problems locating the email with the serial number to download again student cs5 edition. Is there a way to get a new one issued? How would this work?
Thank you
You must have an account with Adobe and in this account, there should be a record of your programs and the serial numbers used to activate them.
The edition of students should not be different from any other, so you have to just download the demo version of the software and then activate it using your serial number.
You can download the demo version of the software using the link below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important article Instructions on the pages to download to this site or the download may not work properly.
CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
If you have problems with the number of series or activation, you must contact Adobe technical support by chat or phone.
Here are some links to help get in touch:
-
Equium M70 173 - a new drive hddrecovery then ERROR
After following the instructions to replace my HARD drive and recover the laptop because of the fatal error.
I bought a 2.5 SATA HDD Samasung, I run the recovery disk and it selects a full recovery just after about 95 to 100%, it beeps and says ERROR and then displays a screen of style MSDOS and I don t have a clue what's going on? I have if it was all beautiful work and then it just stopped.
I run it twice and it's the same thing. Is the computer broken?
Very confused.
Thanks in advance for any help and if I need to give more info just let me know and I'll tell u what you need to know - information from the screen or something.
Thank you
Was it a HARD drive new or used one?
Is maybe damaged WHAT CD/DVD recovery?
If possible try to use the facilities original Microsoft CD to install the operating system (Windows XP SP2 home edition). -
Equium L350 - Vista fails to start after the installation of recovery
Hello world
I have an Equium L350 after an accident I couldn't restart my pc. I tried to solve by using the recovery f8 menu and it did not work so I contacted Toshiba and got a restore disc. I reinstalled from the disc, after the instalation it said complete installation but visa does not start.
I get: Windows cannot repair this computer automatically click finished to turn off your pcAfter a format and reinstall my computer broken? He is 13 months here for out of warranty
Hello
Normally after the installation of recovery your laptop should work fine again.
In my opinion, it could be a malfunction of the equipment. Did you test the HARD drive for bad sectors? You can do this with Drive Fitness Test: http://www.hitachigst.com/hdd/support/download.htm#DFT
Download the ISO image and burn it to a disk. Then you can boot from it and test your HARD drive for errors.I also recommend to check the RAM for errors: http://memtest86.com/
Memtest is a good diagnostic tool for the RAM.I hope I could help a bit. :)
-
XP does not support burning DVDs or need for resettlement?
The combo CD-RW/DVD-ROM drive in my work more former Windows computer has failed. I replaced it with a DVD +/-RW recovered on a newer computer broken. The computer came with Windows 98SE (I said it was my most old), but I had it installed the player that can only play DVD's before the upgrade to XP.
I thought the Hardware Wizard to detect the new drive looked like XP it can now burn DVDs, but everything concerning the integrated burning guard speaks "copy to CD" or "burn CD" and encouraging me to "insert a blank CD.
Not XP SP3 doesn't support data DVD burning using built-in tools, or should I reinstall or repair XP to recognize that the only CD burner has been replaced by a DVD burner? It would be easier to find just a 3rd party free tools. I didn't break anything to use as I got a burner that has been integrated into another computer (breath capacitors on the motherboard) burner who gave to a recycling center after having been stripped of useful things like a hard drive replacement, and a 56K modem/fax on a map. (the modem may not be useful nowadays, but fax is).
I'm afraid that "native" DVD burning was introduced not to Windows until Vista. XP does not support native DVD burning. However, you can use 3rd party burning software. Most "retail" burn the material will be delivered with a CD offering a 'lite version' of such software, for example Nero.
There are also freebies autour. Many on this forum recommend imgburn
(I have no experience of this product on which to base a personal recommendation)
-
Suite of crush hard drive, now whenever I try to go back on says am a disc is missing
I / ve had some problems with my pc - am a novice so not good with technical queries .my computer broken and using tech guy was a complete discovery but had a power cut and now every time I try to go tells me back on a disk is missing (it's my daighters pc that I use) I don't have either record of repair so sure what to do will be grateful for any help Thank you
Original title: hard drive crashed completely using windows vista
Hello
You were 1/2 way through the factory settings recovery was interuppted?
What makes the Tech guys can do for you?
I suggest that you raise with resettlement.
As we know nothing on your computer, these are the main ways to reinstall Vista.
There is no Windows Vista downloads available from Microsoft.
You can contact your computer manufacturer and ask them to send you a set of recovery disks.
They should do this for a small fee.
To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:
You need to change the Boot order to make the DVD/CD drive 1st in the boot order:
How to change the Boot order in BIOS:
http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm
"How to replace Microsoft software or hardware, order service packs and replace product manuals.
http://support.Microsoft.com/kb/326246
And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.
The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)
Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.
Ask them to the proper key sequence.
Some manufacturers have more available Vista recovery disks.
If this happens, you may need to try this instead:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
Maybe you are looking for
-
Tecra M2 - green screen of vertical lines, help needed!
Hi all, looking for some advice with an old Tecra M2, I get this: Any ideas on the flaw before I get out the screwdriver? [http://s91.photobucket.com/albums/k311/Jay_Carrots/?action=view¤t=DSC00446.jpg] Thanks in advance, Justin
-
Can no longer open the hard drive
Hello I used my external hdd to 4 TB (connected to USB 3.0 to copy data through the CCC on another external hard drive. Somewhere in the Middle he stopped. When I try to open the 4 to (by clicking on it) the finder crashes - every time. I put inside
-
Game controller will not connect with game
I bought Microsoft Combat Flight Simulator and a LogiTech gamepad Pro years 3D extreme when I had a Windows XP computer, and they work very well together. I've since upgraded to a Windows 7 computer. I updated the driver for the joystick, and the o
-
Please guys, I really need your help on this issue.I tried using freetds driver but when I use db link I get this error:ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:[Generic connectivity using ODBC] [S1000] [9013