Computer laptop HP 2000 series and drivers Win7

Similar Questions

• I use a computer laptop gateway t-series and have problems with driver installation

  Original title: driver installation problems

  I was running a computer laptop gateway t-series that has windows vista installed. I uninstalled vista and installed xp pro on a disc borrowed from a friend.i did not know at the time where the drivers must be installed separately. Not only that, reinstall drive was from dell. my friend has a dell computer. the xp installation went well but I don't know how to proceed with the installation of the required drivers. you have any suggestions on what I can do?

  Hi Speete66,

  ·         What is the exact model of the laptop?

  Visit this link to download the drivers for Gateway Laptop:

   

  http://support.gateway.com/support/drivers/ddaStepMain.asp

  You can also see the following article in the Microsoft Knowledge Base for more information about hardware device drivers:

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

   

  Information about the hardware devices for Windows XP drivers

  http://support.Microsoft.com/kb/319908

  Let us know if this information useful.

• I have a computer laptop gateway with vista and im stuck at "bootmgr is missing". and I can't even it at the command prompt, you know the c:? Help

  I have a computer laptop gateway with vista and im stuck at "bootmgr is missing". and I can't even it at the command prompt, you know the c:? Help

  I can't get a secure boot or anything. are there secret shortcut keys or anything like that? !! ??

  Dear klh76

  You need a USB FLASH DRIVE, you can transfer the files from the Recovery Console Windows Vista from any other pc or laptop running Windows Vista, go to the backup and restore on the other computer and click on create a drive recovery system on the file menu. Once done, insert the usb key into the laptop, you want to fix, start by using selected peripheral USB device as MBR, follow these steps on screen, you can repair a corrupt Windows Vista it or restore to a previous restore point.

• I have a computer laptop envy m7-k111dx and the hard drive has gone bad

  I have a computer laptop envy m7-k111dx and the hard drive went bad and want to order a HP recovery disc through the website to order it is to take me through circles

  Please use the support of HP recovery, you created earlier to return the computer to a factory State. If you create your HP recovery media when you first set up your computer, please contact the official support of HP in your region / country, via the HP portal to support all over the world, to see if the HP recovery support is available for your computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• my new Dell battery charge not on my computer laptop dell 1535 series using windows vist. and hate it.

  Help, my new Dell battery will not charge on my laptop (Studio 1535 series)

  http://support.Dell.com/

  Dell support at the link above.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

  Contact Dell link.

  As a new Dell battery, they will be the ones to contact for any problem with him.

  See you soon. Mick Murphy - Microsoft partner

• computer laptop dv2000: keyboard locked and not working mouse proerly

  my computer keyboard laptop dv 2000 is locked and mouse clicks brings only the property window or opens the menu of the control panel. My os is Windows vista ultimate. I tried a hard reset by removing the battery. external key board and mouse .no use .all United together can help me. It will be a great help.

  Hi @pxj

  I understand that you are having problems with the keyboard and the mouse. I'd like to help, but I need more information. Please report the number of complete product for your laptop. See the following if you need help to find out who.
  How can I find my model number or product number?

  For the time being to visit these pages and see if something is applicable or useful.

  The problems of keyboard - windows.microsoft.com

  HP laptops - troubleshooting (Windows Vista) USB device

• I can't open the library of music on my computer laptop 2d29wm 2000.

  I use Windows 8 for my computer laptop 2000-2d29wm, and it usually never gives me problems. However; recently, when I open my music library, a message appears. The message says: " Music.library - ms no longer works." This library can be removed safely from your computer. Will not affect the files that have been added.

  I had downloaded a music app right before you start.

  Hi AngelSoleil,

  Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I saw your post about the error message with your music library. I did some research on your issue and here is a third-party site with a procedure step by step to show you how to fix this error.

  Thank you

• Computer laptop G62 couldn't update drivers AMD

  As it is said, my laptop G62 went update the Bios and drivers and it says update failed. I tried to update again, but he says no update available. History shows a failure. Any advice? Thanks in advance!

  A link to the pilot available & software download here.

• HP G60 - 123CL laptop PC: cd software and drivers for Windows 7

  I just bought the cd online for windows7 operating sytem for software and drivers.  I was really hoping to get a print driver included so I can reinstall my hp all in one printer c7250.  I tried the hp Wizard, but did not have the full software provided with my original printer, which exceeded for my windows 7.  When I ordered the software for windows 7, it doubled my purchase of 2 cd somehow I don't even think I need one, because I am trying to find a complete software for my all in one printer.

  crankykitty wrote:

  I just bought the cd online for windows7 operating sytem for software and drivers.  I was really hoping to get a print driver included so I can reinstall my hp all in one printer c7250.  I tried the hp Wizard, but did not have the full software provided with my original printer, which exceeded for my windows 7.  When I ordered the software for windows 7, it doubled my purchase of 2 cd somehow I don't even think I need one, because I am trying to find a complete software for my all in one printer.

  This is where the problem I see... It says obsolete so unless this player software is a version of vista it won't work. What it takes is to go to your "devices and printers" and search for your printer that you've hooked to it and let Windows 7 load the drivers there for him. This is how I did it for my HP 8450 and it loaded correctly the software/drivers for it and it works very well. So to outdate printer if this process doesn't work or find it then most likely it is no longer supported in the later version of the operating system. That means that you can buy a newer printer software/driver in charge.

  Also, it might help

  How to install HP printer without disk

• Computer laptop Windows XP crashed and now I can't reinstall all my drivers.

  have problem laptop crashed today cannot get all the programs installed saying missing drivers etc.

  audio device on bus high definition audio == dev modem on bus high definition audio == network controller == video controller + con video vga model ++ and 802.11nwlan can recover these any help of body as it is impossible to get laptop on line thank you

  original title: error code28

  Use a working PC. Save the driver correct installation on a USB flash drive files. Subsequently fix the drive flash to your Latitude D620. Download here:

  http://www.Dell.com/support/drivers/us/en/19

  You don't need to download all of the 74 files!

  Start with the chipset (R138226. (EXE). Then the graphics card. Then the two drivers (Ethernet and wireless) network. Then audio.

  Ouch. Dell has just revamped their site and makes it HORRIBLY. Good luck!

• 2d28ca: computer laptop hp 2000 drivers

  looking for drivers for the network controller (1) Please next, pci (2), (3) thank you sm bus controller device

  Hello:

  First install the amd chipset drivers and reboot.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  network controller:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-123851-1&cc=us&DLC=en&LC=en&OS=4063&product=5388155&sw_lang=

  PCI device:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127099-1&cc=us&DLC=en&LC=en&OS=4063&product=5275376&sw_lang=

• Satellite M40-129 and drivers Win7

  Hello

  I just installed Win7 on my Toshiba Satellite M40-129. It was really hard... Windows refuses to complete the installation until I deleted pcmcia.sys in the windows system folder.

  Now I have the problem that my pcmcia cardbus is working nor my SD card reader. As soon as I ask for Win7 to update driver PCMCIA, the doesn´t of the computer unbootable until I have again to remove pcmcia.sys.

  Now my question: I can live with having one for not working the PCMCIA port, but there all the drivers available for windows 7 and the Cardbus SD?

  Thank you very much.

  Technohead

  This old Satellite is not supported for Win7 and you won't find any driver for it. It is not easy to configure the hardware on these old books but Win7 has good drivers base and, after several Microsoft updates most of the equipment must be installed correctly.

  What you can try is to try to install the driver designed for another model of laptop. Perhaps satellite A100 or Satellite A200. I put t know if this will help but you can test it in any case.

• HP 2000 laptop: HP 2000 Notebook PC Drivers

  I did a format for my PC but I lost all the drivers, I can't connect to Internet also I can not connect via Ethernet cable
  PCI DRIVER
  ETHERNET CONTROLLER DRIVER
  NETWORK CONTROLLER DRIVER
  BCM20702AO DRIVER

  The device information:
  Manufacturer: Hewlett-Packard
  Model: HP 2000 Notebook PC
  Model number: A7A78UA #ABA
  Categories: Laptop computer

  If anyone can help me please...
  Thank you

  Hello:

  Please see my response to your other post on the link below:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/HP-2000-notebook-PC-A7A78UA/m-p/4811717#M276544

• Laptop HP 2000-2b09CA need drivers for network

  I just installed Windows 7 on my HP 2000-2b09CA company. I found the drivers located on the web site, but is for States that it cannot find the drivers. I tried to install SP58944 and SP58586, and they say that's not the driver. Miss me the following.

  Eithernet controller

  Network controller

  PCI device

  SM Bus controller

  Model 2000-2b09CA

  series [edited by Moderator]

  prodict d1e80ua #aba

  Warrenty #1y1y0y

  You are the very welcome.

  HP really messed up on the specs of this model!

  Here is what the product care state that she - Intel hardware, that's why I kept announcement Intel chipset drivers!

  http://support.HP.com/us-en/document/c03523633

  Here's the Chipset Driver AMD, you need... Download and install the 49.7 MB chipset driver file and restart.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  You probably need the AMD graphics driver for this model as well...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111219-1&cc=us&DLC=en&LC=en&OS=4063&product=5275376&sw_lang=

• Computer laptop loss during berthing and departure color management settings

  I am running Windows 7 Enterprise SP1 64 bit on a Dell Latitude E6540 with a docking station.  I have calibrated color screen on the laptop as well as an external monitor attached to the docking station.  Whenever I'm disconnecting the computer, the system resets the color management settings and I lose the color calibration on the screen of the laptop.  I have then go manually through Control Panel and re - apply the calibration profile to make things normal.

  I have everything set up so that the calibrated profile is the default profile for the system and I checked this is the case if the machine is docked, but he always loses calibration settings each time.  All drivers of video system are also updated and current.

  Any thoughts or ideas on how to solve this problem?

  Thanks in advance for any advice.

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems with color management in the computer.

  As you said that you use a Windows Enterprise Edition in the computer. I would advice to follow the link below to post your query in the TechNet forums because they have more expertise on this issue.

  Forums TechNet for Windows 7
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Hope this information helps.