Computer laptop loss during berthing and departure color management settings

Similar Questions

• I have a computer laptop gateway with vista and im stuck at "bootmgr is missing". and I can't even it at the command prompt, you know the c:? Help

  I have a computer laptop gateway with vista and im stuck at "bootmgr is missing". and I can't even it at the command prompt, you know the c:? Help

  I can't get a secure boot or anything. are there secret shortcut keys or anything like that? !! ??

  Dear klh76

  You need a USB FLASH DRIVE, you can transfer the files from the Recovery Console Windows Vista from any other pc or laptop running Windows Vista, go to the backup and restore on the other computer and click on create a drive recovery system on the file menu. Once done, insert the usb key into the laptop, you want to fix, start by using selected peripheral USB device as MBR, follow these steps on screen, you can repair a corrupt Windows Vista it or restore to a previous restore point.

• I have a computer laptop envy m7-k111dx and the hard drive has gone bad

  I have a computer laptop envy m7-k111dx and the hard drive went bad and want to order a HP recovery disc through the website to order it is to take me through circles

  Please use the support of HP recovery, you created earlier to return the computer to a factory State. If you create your HP recovery media when you first set up your computer, please contact the official support of HP in your region / country, via the HP portal to support all over the world, to see if the HP recovery support is available for your computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Between 5.5 and CS4 color management problems

  I'm faced with a problem of color management and would be very grateful if someone could help me with that.

  I'm working to create in inDesign CS4 (6.0.6) and using my usual color management settings. I set up at the bridge in my CS4 and then use in InDesign, Photoshop and Illustrator. My settings are for jobs printed here in the United Kingdom, as follows:

  ---

  Workspaces

  RGB: Adobe RGB (1998)

  CMYK: Coated FOGRA39

  Color management policies

  RGB: Convert in the workspace

  CMYK: Convert in the workspace

  All three 'request when opening' checked

  ---

  Then I have a customer takes the file InDesign me, working there and returned to me to complete the development and execution of the high pdf - are for printing. It runs the latest InDesign CS5.5. I have him ordered to open InDesign and set his Edit > color... settings as follows without any open file is by default (am I do this bit correctly, it will work through all the files I send?):

  ---

  Workspaces

  RGB: Adobe RGB (1998)

  CMYK: Coated FOGRA39

  Color management policies

  RGB: Preserve embedded profiles

  CMYK: Preserve embedded profiles

  All three 'request when opening' checked.

  ---

  We did some testing and it doesn't work. It can open and work on the file ok and I see text changes she did without any problems.

  But when I analyze his record returned in detail, I can see that his record is now showing view > test format > Document CMYK - us Web Coated SWOP (v2)

  that suggests something coming to an end that applies US profile. I can change the configuration of evidence to work: Coated FOGRA39, but prefer the US profile never made his reappearance!

  My apologies if I'm doing a very basic error or errors here, but I usually have my color management just on my own system, so this is new territory for me. If anyone can help with what I should advise him to do to an end, I would be very grateful (she is about 300 miles north of England, so can't easily try the options on his MacBook Pro myself!)

  PS I also noticed that some items on the page have been modified when exporting .idml to 80% of transparency-enough to fool me for a while that the colors had changed over those too, when in fact I don't think that had anything to do with the issue of profile, probably just a bug between economy of process CS5.5?

  The easy way to get your colleague to use the settings that you want, is likely to create a .csf (color settings file) by pressing save button in the Edit > color... Settings dialog box, then having his press office in the same dialog box and selecting your .csf you sent.

• I use a computer laptop gateway t-series and have problems with driver installation

  Original title: driver installation problems

  I was running a computer laptop gateway t-series that has windows vista installed. I uninstalled vista and installed xp pro on a disc borrowed from a friend.i did not know at the time where the drivers must be installed separately. Not only that, reinstall drive was from dell. my friend has a dell computer. the xp installation went well but I don't know how to proceed with the installation of the required drivers. you have any suggestions on what I can do?

  Hi Speete66,

  ·         What is the exact model of the laptop?

  Visit this link to download the drivers for Gateway Laptop:

   

  http://support.gateway.com/support/drivers/ddaStepMain.asp

  You can also see the following article in the Microsoft Knowledge Base for more information about hardware device drivers:

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

   

  Information about the hardware devices for Windows XP drivers

  http://support.Microsoft.com/kb/319908

  Let us know if this information useful.

• Computer laptop HP 2000 series and drivers Win7

  Hello HP Rep

  I have Lady I know the district knows I'm into computers and asked me to get rid of windows 8 for her.

  She is an older Lady and has trouble with understanding computers initially. WIN8 is too difficult for someone with a slight know how in the world of technology.

  I got Win7 installed for her, but none of the drivers have been installed.

  The network adapter driver is not here, so I can't connect to the internet to get the others.

  I need to find the correct network drivers so that I can download win7 updates and all the appropriate drivers for the computer.

  For the Ethernet controller hardware ID is:

  pci\ven_10EC & DEV_8136 & SUBSYS_188B103C & REV_05

  pci\ven_10EC & DEV_8136 & SUBSYS_188B103C

  pci\ven_10EC & DEV_8136 & CC_020000

  pci\ven_10EC & DEV_8136 & CC_0200

  Let me know if there is more necessary info and I thank you for the help.

  Hello:

  You can use all the W7 x 64 drivers and software HP 2000z-2 has 00 on that one.

  DO NOT USE ANY BIOS OR THE FIRMWARE OF THIS MODEL FILES

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5275376

  This model uses the network driver for the wireless card Atheros wireless and the driver for Realtek LAN for the hardware ID you have posted.

  You will also need the smbus controller driver which I enclose below.

  Download and unzip the file.

  Go to Device Manager and click the controller smbus needing drivers.  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.  Then restart.

• I'm trying to print using my own profile and no color management.   I have found a lead to the Adobe Color Print Utility but reached a point where he declared that she would not work with future versions of the Mac operating system.   I have Mac OS 10,11,

  I have been printing PSD images with my own profiles and color management using an Epson R2880.

  I've now changed to a Mac with OO 10.11.3 and unable to replace the color management.   I found a lead on the Adobe Color printer utility but failed and got a message saying that the utility has only worked with an earlier version of the OS 10.   Is there a way to turn this problem?

  GHK

  You don't want or need to use the old setting 'No Color Management'. Is no longer the right way to print with a custom printer profile, in the current versions of Photoshop and OS X.

  To use a custom profile to print, use the attached picture settings:

  • In the print dialog box, set the Photoshop color management menu manages colors.
  • Select your profile to the printer in the printer profile menu.
  • In the settings of printer driver Epson (under Printer Setup button) make sure that the Epson printer driver is set to the color - off management.

  

  I don't know why Adobe Color Printer Utility works in 10.11.3, because I can throw on OS X 10.10 and 10.11. But in the end, it doesn't matter, because you don't want to use it for this purpose Adobe Color Printer Utility is only to print a profiling target, no images. And it won't let you print using your custom printer profile, because the whole point of the utility is to print with no discoloration whatsoever.

• OpenGL and ICM color management

  I am looking ways to spend my plugins to use OpenCL and OpenGL to take advantage of the power in modern GPUS.

  More specifically, with the Windows GDI, ICM color management can be configured to be automatically done through calls such as BitBlt(), and in fact I do this.

  Can anyone here point me in the right direction to learn how we could achieve better color space when using OpenGL in place and place the oldest Windows GDI calls?

  Thank you!

  -Christmas

  OpenGL pretty much ignores the color management - it is up to the developer to manage the color before you go to the GL, or use a shader to implement the correction of the colours inside GL (Photoshop does both, depending on the capabilities of the GPU).

  Side note: CIM is just Microsoft implementation of ICC color management standards, a bit like ColorSync is the implementation of Apple.

• Re: What update display driver affect color management settings?

  Hi all!

  I received a message on the new update of the display driver and I have a few doubts about the installation. When I installed an update of the BIOS driver, all the parameters of the BIOS returns the value default ones, but in this case, it wasn't a big deal to put once again according to my needs. But I spent, probably, half a day, adjusting the color using color management, and I really want to keep the settings I've done. So, please, tell me, if updating the nVidia driver assigns these parameters and if there is no way to save them? Thank you very much!

  Hello

  If you install a graphics card driver, your bet will be set by default. To be honest, I see no reason to update the drivers if the system works well. I always use the same drivers that I downloaded before and do not update again. On the backup of the settings, I don't know how to do it. Anyway, I've never thought about this.

  You are welcome, if have any other questions.

  Post edited by: Jeka-HE

• Computer laptop shutdown during recovery

  Help, I have a toshiba laptop with windows vista it applied final configurations during the recovery mode and it stop because I forgot to plug my charger. Now when I take f8 I see everything in addition to the recovery mode and my laptop runs in registory error. Safe mode does not load and I held all the keys (F8 F12 F2 C 0...)

  Please help me, I need to do my work, I do not on the files on the laptop, I just fixed it.

  Hi Salocalom,

  (1) is there an error message while trying to start?

  I recommend contacting the manufacturer of the computer (Toshiba) for specific advice on how to back the computer to a State since the recovery or factory restore is independent of Microsoft.

  Note: All the data and applications will be lost during the recovery process.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

• WiFi for computer laptop HP ENVY 15 and Ethernet connection problem

  Hi, a few months ago, I brought a HP ENVY 15 Notebook PC running windows 8.1. It is connected to my wifi with Ralink RT3290 802.11bgn Wi - Fi adapter. My modem is a Technicolour TG582n 2 Wireless ADSL + with wireless 802.11 b/g/n compatible.

  As soon as I got there I noticed a problem of internet where I would be able to connect to my home WiFi network and get full reception bars but would have a hard time to access Web sites on web browsers such as chrome, mozilla and internet explore pages takes some time to load and eventually reached a page "this webpage is not available" (for chrome). This problem seems to occur only with my home network as it can connect to public wifi and my wifi friends and yet I have many other devices such as laptops and other smartphones connected to my wifi that did not at all have poblems with internet and it just seems to be mine. When I connect via ethernet I get good connection for about 10 minutes and then I was completely cut off. However, I can upload a file via the wifi ok if I can get it to start and I can play a game online well enough but often disconnected after an hour or two.

  I checked for new updates of pilot, but they seem to be up to date and im do not manually downloading and installing one on the hp site but I tried (I did probably wrong). I ran the diagnostic function, but it cannot detect all problems. I looked around the internet as well, but still havn't found a solution.

  Also I got the laptop sent back and received a new but the same problem persisted and as I walked through the process of the person I was talking to a admitted that I had a problem like they remote limited from my laptop for a little for the access problem.

  Please help, I've had this problem for a month or two now and is really becoming a problem since I use my laptop computer for purposes of requiring home internet work.

  Thanks in advance and I hope you guys can help!

  Hi @Eugene5 ,

  Welcome to the HP Forums!

  It's a great place to find answers and information.
  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that you have a problem with your connection Wireless at home. You are able to connect with full bars but are unable to access the web.   When you're lucky hours just access the Web, you can make a download if you get started in time or play games online for one or two before again declining. You ran the diagnostic function, but no problems were. You had the phone replaced for the same issue, but the replacement has the same question.

  You know your network is an 802.11 G or 802.11n.   How do I know if my WiFi connects using 802.11n (as superuser)

  Please check this setting.

  1. Open the Device Manager
  2. Click the network adapters to expand the list
  3. Right click on the Ethernet connection, and choose Properties
  4. Click the power management tab
  5. "" Please check that ' allow the computer to turn off this device to save power "is not checked.
  6. Repeat this process for all types of listed under network adapters.

  .

  What does your wireless card is supported?

  Here's a link for How to fix little or no Wi-Fi connectivity issues in Windows 8(of fixedbyvonnie) to help you.

  If you need further assistance. Please provide your exact model of HP laptop and your operating system.

  How can I find my model number or product number?

  Good luck!

• computer laptop vaio vgn-c290 and inability to restore the complete system

  I have a vaio laptop vgn-c290 (windows vista Home premium), using the f10 at the system startup key, tried to restore the complete system (c :) drive), but installing custom programs stopped at 55% 'installation click on dvd' feature. I waited about an hour to see any progress but nothing happened and I had to interrupt the installation process and windows not installed correctly. Please help me find a solution.

  Thank you very much.

  Hello

  Thanks for the post.

  Reset the BIOS:

  1. Turn on computer > F2 key.
  
  
  2. Then, reset the BIOS.
  
  
  3. Use the arrow keys on the keyboard to find the "Exit" button, and then select an option "Load optimized defaults or.
  
  
  4. Save the settings and exit the BIOS setup.

  If the problem persists, run the recovery:

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/41931

  If the problem persists, contact Sony service team:

  http://eSupport.Sony.com/us/p/service.pl

  If my post answered your question, please mark it as an "accepted Solution".

• computer laptop dv2000: keyboard locked and not working mouse proerly

  my computer keyboard laptop dv 2000 is locked and mouse clicks brings only the property window or opens the menu of the control panel. My os is Windows vista ultimate. I tried a hard reset by removing the battery. external key board and mouse .no use .all United together can help me. It will be a great help.

  Hi @pxj

  I understand that you are having problems with the keyboard and the mouse. I'd like to help, but I need more information. Please report the number of complete product for your laptop. See the following if you need help to find out who.
  How can I find my model number or product number?

  For the time being to visit these pages and see if something is applicable or useful.

  The problems of keyboard - windows.microsoft.com

  HP laptops - troubleshooting (Windows Vista) USB device

• Computer laptop closing drank himself and the battery goes from fully charged low battery in a short period of time?

  Hi I have a question about my laptop Toshiba Satellite. I've had it for almost 2 years and it worked fine up until just recently, my laptop stops itself and I thought before that this could be due to a heating problem but when it stops my laptop is not yet hot. I have installed new programs or anything again for that matter so I'm honestly confused? What's wrong with that? I also keep my laptop on a laptop computer fan to keep over heating.

  Hello

  It might possible that the battery is going bad.

  However, try the following steps:

  Method 1:

  See the link, then run the Fixit.

  The problems of power consumption and extend laptop battery life
  http://support.Microsoft.com/mats/windows_battery_power_settings/en-us

  Method 2:

  Battery meter: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/battery-meter-frequently-asked-questions

  If the steps above fail then I would suggest that you contact Toshiba support. Check out the link.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  It will be useful.

• HP G72 - computer laptop is plugged in and that the charge light appears on the side, will not turn on

  I have G - 72 laptop I've had for about a year now and just yesterday, I started having a problem where the laptop does not start? It is connected on the wall and the laptop and seeing load lights up blue and the computer does not start. I unplugged and still nothing?

  Don't know what to do?

  Hello

  Try a Hard Reset as follows.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the power button for a minute.  Reinsert the battery, connect the AC adapter and see if the laptop boots.

  Kind regards

  DP - K