computer laptop quit working now I can't come back, suggestions

Similar Questions

• Entered in the wrong the static IP address and now can't come back. suggestions?

  Running Windows7 and try to set an IP address for printer HP 6700 wireless.  It has been 192.168.2.108; I changed it to 192.186.2.250 (implementing the 8 & 6).  So, I restarted the router.  The HP update IP address utility found the new address, I "removed" the old printer and "reinstalled".

  However, it does not print and I can't return to the print server using either the old or new IP addresses.  The print dialogue box indicates that he sent the information to the printer, but opens an error HP screen and says he is unable to communicate with the printer.  I also downloaded and executed the request of the physician HP; did not help to solve the problem.

  I went to the Linksys WRT100 router but can't see anywhere I can control the HP printer.  Any ideas or suggestions are greatly appreciated.

  Hi Bob,

  You cannot access your printer because the configuration of an IP address that is not on your network.  Beaches of normal IP address on routers are 192.168.1.1 to 192.168.255.255.

  You need to restore the default values for your printer to correct the IP address.  It should be done either cold Reset / Hard Reset/NVRAM reset your printer available online.  Sometimes the default values of restoration of the menus of the control panel will allow you to reset the IP address also.  After that reboot is performed the printer must be on your network home and accessible again.

  Let us know if you need the exact steps.

• Vista on computer and someone put it on Windows 7, now can't come back on Vista

  I had windows vista on my computer and I had someone put on windows 7, now I can't go back to windows vista. can you please help me and tell me how to get back on windows vista because windows 7 will need a restored drive now and I don't want to pay $100,00 so he can work in that it has expired. What should I do to get back to vista and how can I get a restored vista disk? can it be sent to me and how much does it cost?

  * original title - need help *.

  See: How to replace the lack of software Microsoft Carey Frisch

• Had to format my laptop and now I can't turn back the Adobe Acrobat Pro XI

  Had to format my laptop and now I can't turn back the Adobe Acrobat Pro XI that he keeps giving me a message that the serial number I have providede is valid but calling it a product was not found on this computer. I again downloaded the software installtion of my account page and sitill keeps making the same problem. Do I need a new license?

  Hijeanm9453734 ,

  Seems that Acrobat XI was an upgrade from the previous version. You need choose your earlier version of Acrobat, comes its serial key to activate the upgrade Acrobat XI.

  Kind regards
  Nicos

• My CD/DVD on computer does not work and I can't update the Office XP Service Pack 3. Microsoft can do for me?

  The CD/DVD on my computer does not work and I can't update the Office XP Service Pack 3.  Microsoft can do for me?

  Hi Nancy,.

  I suggest you provide more details as to how the problem came to be or how and when it happens. There are many experts here, but you must give specific details
  See you soon ~

• I clicked on work offline in Windows Live Mail. Now, I can't get back online

  I clicked on work offline in Windows Live Mail. Now I can't get back online, regardless of how many times I click go online. When I first open Windows Live Mail he asks me if I want to go online. I say yes, and then he asked a second time if I want to go online. Yet once again, I say Yes. I can't always online.

  Lorne Friesen

  Open Internet Explorer, and then press Alt + F to open the file menu. If work offline is selected, deselect it. If it is not selected, select it, wait a few moments and then deselect. Now check if Windows Live Mail is still offline. If this is the case, repeat the cycle to select/deselect in IE until WLMail Gets the message.

  What version of Internet Explorer is installed? In Internet Explorer, press Alt - H has to do.

  You have Google Chrome installed?

• I liquidated my bar. As the search bar when you type in the web address, and now I can get it back. I handed to the clicked place where I did to trun off (unchecked it), and I don't see anything again?

  I liquidated my bar. As the search bar when you type in the web address, and now I can get it back. I handed to the clicked place where I did to trun off (unchecked it), and I don't see anything again?

  Hold down the key (key in OSX) and press the following letters in this exact order: V T M
  The bar of menus must now appear permanently, unless you turn it off again (view > toolbars). Turn on/off the menu bar is a new feature in version 3.6.

  See the other bars under view > toolbars. By clicking on one of them will place a check mark (display) or remove the check mark (not shown).

  Then, in the Menu bar, go to view-> toolbars-> customize, then press the Restore Default Set .

• I have remove the version options in the main menu bar in Daemon tools pro advanced 5, now I can't get back them.

  I remove options in the main menu in Daemon tools pro advanced version 5 bar, now I can't get back them, can someone help me how to recover the menu buttons in the user interface of the daemon tools toolbar

  original title: daemon pro tools

  Hello

  The question you posted would be better suited to the community of Daemon Tools. Please visit the link below to find a community that will provide the support you want.
  http://www.daemon-tools.cc/Eng/support

• I used creative cloud perfectly until one day asked me to update and I clicked on the button. All software has now changed from trial version and I have right to use within 10 days. What should I do now? Can I go back?

  I used creative cloud perfectly until one day asked me to update and I clicked on the button. All software has now changed from trial version and I'll lose the right of access of Illustrator, Photoshop and InDesign in 10 days. What should I do now? Can I go back?

  Hi Emily,.

  Please visit: https://helpx.adobe.com/manage-account-membership/cc-reverts-to-trial.html

  I hope this helps.

  Concerning

  Megha Rawat

• I resized the window at 150% and now I can't get back to 100% view and keep this size. How can I get that back to the right size?

  I resized the window adobe to 150% and now I can't go back to the 100% size and keep this size. How can I retrieve the original 100% and keep this size?

  View menu > Zoom > Zoom on...

• HP Pavilion 15 laptop touchpad works but I can scroll or zoom or double click

  I can use the touch pad to move, but edge kicks do not work so I can't change an app from the app and I can't operate zoom button or scrolling is? any help or ideas

  Hello

  Try the following.

  Download the latest installer driver Synaptics, on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63975.exe

  Then, open windows control panel, open programs and features, right click on the entry "Synaptics Pointing Device Driver" and choose uninstall.

  When this has completed, restart the laptop.

  When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  When windows has reloaded, you may now need to configure the options require you (Pinch Zoom, edge slides etc.) for the touchpad - open windows control panel, open the mouse, select the tab settings of the ClickPad, then click the button settings ClickPad.

  Kind regards

  DP - K

• My computer laptop monitor works, but does not have the windows desktop.

  original title: my laptop monitor works, but the windows on desktop are not displayed. The desktop appear correctly in safe mode but not in normal mode. Any suggestions?

  Running windows XP media center edition on an HP laptop. AMD Turion 64-bit dual core.

  Hi Prohoss,

  Follow the steps in this document to perform a System Restore. You will need to start safe mode to perform the steps.

• 6600 not scan on my computer laptop windows 7, now the same thing on my windows 8.1 machine new

  Jeez HP I spend 8 hours to do all the things on the HP support for win 7 now I think this printer is so cheap ($79) print no scan or fax...

  I found this and now I can finally scan,

  http://www.YouTube.com/watch?v=HbWpgww5I-M

• I had to use my system disk and recovery to all disc reinstall on my Acer laptop. everything works except the sound only comes out of the speakers

  It is said that my speakers are working... but nothing comes of them. :( I was struggled with this laptop because it struck at 6 months. I sent in by Geek Squad in Best Buy, they sent and everything has been replaced inside. they gave me back with absolutely no work system. He was not able to load or anything. I've made repeatedly to get systems but they said I should go to Acer. I received the CD from the company and brought back the cds and the laptop to Geek Squad/Best Buy. The tech guy said that a fool would put a cd into a laptop computer and load it. When in reality it was really working. In recent days, I put the CD and discovered that we had finally got the right CD. Records of the system and the recovery disks, but I tried to listen to music and watch movies, but no sound. It bothers me because I tried to solve this problem for over a year. I'm hard pressed economy, and the need to understand this point before I go to College. I don't really have the money to buy another laptop.

  I really hope someone can help!

  Thank you!

  Hello

  I suggest you to run the below fixit and check if this may help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  For more information, see this link:
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02

  It will be useful.

• Returned to win 10-7. Now I can't go back to 10.

  Hello, I have upgraded to Windows 10 in October using the link update on my PC. I got frustrated very quickly the next day and returned to windows 7 right now. Since then, now I want to reinstall Windows 10. I have even 10 Windows download icon in my taskbar. I click on upgrade, and he tells me it's the Windows 10 download, and I can then choose to install now or wait until later. When it finishes downloading all that says it's my computer is up-to-date.

  Basically, I can't have a Windows 10 installation to run. I myself screw updating then return? So now I can't 10 Windows again? I don't know where to go from here.

  I had a problem when I went back to 7, but I think I had fixed them, except that my backup does not work properly.

  I still have my computer upgraded to Windows 10? If so, how?

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).