Computer logs in as a temporary profile, but do not know why
I connect to my computer with my username and password, but then the computer creates a temporary office for me.
The error message says that my frofile has an error and the computer I logged on under a temporary account.
Hello
You really need to ask in the Forums of Windows answers corresponding to your version of Windows.
Answers - Windows Forums
http://answers.Microsoft.com/en-us/Windows
======================
References to Vista also apply to Windows 7.
Mode has no default password (unless someone has changed the password so it should be available).
Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.
Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215
How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html
How to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html
BE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html
Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
This allows clear of corruption. Do the same for other accounts if necessary after following the above message.
You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
(or two with the same password) use a test or fix the other.
You can run the Admin account hidden from the prompt by if necessary.
How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.html
What are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html
If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).
Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx
I hope this helps.
Tags: Windows
Similar Questions
-
I can't get my dell A920 to print. It scans but does not print. The reasons why CN can't find troubleshooting. Help
dosducexx,
First run, delete print jobs to eliminate any print job stuck in the queue.
Unplug the printer.
Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.
Restart your computer. Make sure that the printer is deleted. Deleting Manual printer driver
Download the 32-bit drivers for Vista for Windows 7 32-bit or 64-bit drivers for Windows 7 64 bit Vista. Install the Vista drivers in Vista compatibility mode, you will get a message, the printer is not connected. Connect the printer at the moment (power on).
You will find links to the patch/drivers to...
Owners of printer inkjet all-in-one Dell A920 thread (W7)
Don't forget the programs anti-virus and firewall will block communications.
Rick
-
I can't access the appropriate screen to disable Photoshop 9 from an old computer before loading on another. Get the message400 error
Thank you.
9 Photoshop is Photoshop CS2. Activation servers were towed offline some time ago, and there is no requirement to disable CS2.
A licensee of CS2, you can now download CS2 and use the number given on this page:
https://helpx.Adobe.com/Creative-Suite/KB/CS2-product-downloads.html
More instructions:
Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3
-
Desperately need help. I'm supposed to use my computer to type a HUGE Affidavit today and its buggered! Oh no.! Get started with my kids have been playing on my computer and install different games. So I thought that I do the big thing non-technical MOM and start cleaning up the programs! Well I accidently deleted NIVIDA and probably something else (I think) and totally messed up my computer! I have re-uploaded NIVIDA and now my computer "looks like" back to normal, but it throws this error message
"your user profile was not loaded correctly! you have been logged on with a temporary profile. Changes to this profile will be lost when you log out. Please, check your log of events for more information or contact your administrator"and now I can't save anything or find my pictures that I'm desperate for! Can someone please give me a helping hand. Not technically minded, to take me on as a challenge! Thanks bunch :) Sarah
Desperately need help. I'm supposed to use my computer to type a HUGE Affidavit today and its buggered! Oh no.! Get started with my kids have been playing on my computer and install different games. So I thought that I do the big thing non-technical MOM and start cleaning up the programs! Well I accidently deleted NIVIDA and probably something else (I think) and totally messed up my computer! I have re-uploaded NIVIDA and now my computer "looks like" back to normal, but it throws this error message
"your user profile was not loaded correctly! you have been logged on with a temporary profile. Changes to this profile will be lost when you log out. Please, check your log of events for more information or contact your administrator"and now I can't save anything or find my pictures that I'm desperate for! Can someone please give me a helping hand. Not technically minded, to take me on as a challenge! Thanks bunch :) Sarah
Here is the tutorial to solve this problem. It is very involving. Please read the step by step.
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlt-4-2
-
The screen message, "" Windows can't find your locally stored profile and is logging in with a temporary profile". What should I do?
Hello
Try the troubleshooting provided in the link below steps to fix the problem.
Error message: "Windows cannot load the locally stored profile".
-
computer inheirerted of father and you want to restore the factory installed vista system but do not know the password of admin fathers
Hello
You should not have a password to reinstall Vista.
Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.
Here's information from Microsoft, explaining that the policy:
There are several methods to reinstall Vista.
There is no Windows Vista downloads available from Microsoft.
You can contact your computer manufacturer and ask them to send you a set of recovery disks.
They should do this for a small fee.
To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:
You need to change the Boot order to make the DVD/CD drive 1st in the boot order:
How to change the Boot order in BIOS:
http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm
And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.
The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)
Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.
Ask them to the proper key sequence.
Some manufacturers have more available Vista recovery disks.
If this happens, you may need to try this instead:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
-
How to install adobe on 2nd computer when we have a license but do not know the number?
How to install adobe on 2nd computer when we have a license but do not know the number?
You must have your serial number to install a version of the software that requires a serial number
Lost information - response #1 in https://forums.adobe.com/thread/2008767 (for Mac or Windows programs)
Find your http://helpx.adobe.com/x-productkb/global/find-serial-number.html serial No.
-
How and in which files that I can combine my computer policy in the html for my captivate project file? I know that I need to make changes on the css, HTML, and I need to add fonts to a folder, but do not know where please help
https://forums.Adobe.com/servlet/JiveServlet/showImage/2-7496573-757050/pastedImage_0.PNG
This is an image of the files I see
If the police will not be on the end user's computer, it won't make a difference.
You should try to include a web font, but you cannot use those during the creation of course, so when you publish or correct fonts you have alignment issues.
-
4 IPad keeps going to power off of the screen, the screen is cracked but do not know if I need to replace the screen button or power?
Press the sleep/wake and Home buttons and hold for at least 10 seconds.
If this is not enough, take a look at these articles Support from Apple:
If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support
Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.
As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.
More info here:https://support.apple.com/en-us/HT201263
If these steps do not work, contact Apple and ask for help.
-
I am a novice with the games. I used to have Upwords on an old computer, but the CD does not work on my new laptop. It is used to open with Direct X, so I installed on my new computer. I downloaded 4Shared Upwords & unfortunately I do not know how to open it. Can someone please help?
Hi JudeAustin,
· What version of the operating system is installed on the computer?
· What happens when you try to install the game?
· You get the error message?
· What is the format of the file that you downloaded?
I suggest you to contact the game manufacturer for more help and information.
For reference:
Install a program
http://Windows.Microsoft.com/en-us/Windows7/install-a-program
-
I had some trobele with my computer and had to take it when I got it. The firewall was working fine. I do not know
If you date something on it so that it remains not.
I will still have my firewall turned on and off I do not know why but I tried another firewall, and it seems to work ok
Hey Roscoe,
If you're still using MSE, I doubt there's this problem. This made a few changes to the Windows Firewall during installation (if necessary), but certainly nothing that would cause it to turn on and off like that. It could be malware (malware can cause anything), but frankly more sounds like a file systems or corruption or some type of problem with your Windows Firewall or security setting or your operating system in a more general sense rather than the malicious software. I will refer you to experts who specialize in this kind of thing, but if they tell you it's a malware problem, then come back here and we will be happy to help you solve it.
For that matter as described, please post here to get the best advice from specialists in this: http://answers.microsoft.com/en-us/windows/forum/security?tab=all which will be more than happy to help you. You will probably need to uninstall the other firewall you have installed so they can diagnose the problem properly and without hindrance (not just disable it, but completely uninstall to be sure) - but they can tell you more on this subject. Don't forget up next to the Windows Version to use the dropmenu to choose your version if you find yourself in the most appropriate forum for your system.
I hope this helps.
Good luck!
-
The update wants to do a net framework 1.1 sp1 on Windows xp, vista and windows swrver 2008 x 86 (KB2656353), but can not. Why not? He simply has it again and again without updating.
I finally got by a 'person' and he took over the computer. It took almost 2 hours, but he finally managed to fix the problem and get the update installed. Hooray!
-
Can I connect my android for my PC in windows phone 7, but not to those at work. Scientists do not know why!
I am trying to connect to a machine newly built W7 who has free access to the internet and from the guys in IT is not locked down. But there is clearly something different from my home machine. Both are Windows 7 Ultimate on a home group, not to a domain.
I use an adapter Bluetooth USB 4 and can sucessfully pair my phone to work, but my application (remote Unified) says "connection refused".
I tried to disable the firewall and looked at all the parameters that I can find.
I went through the windows wizards advocatus - all of this without any problem.
I'm looking to help him find the source of the issue of refusal of connection.
Hi Gutzy,
Thanks for posting your query on the Microsoft Community.
If I understand correctly, you have 2 computers that have all two windows 7 Ultimate installed on them and the two are not on the field. The PC that is at home works well, when you try to connect to your phone by using unified remote right? You can pair your phone with Bluetooth, 4 USB adapt to the work, but you are unable to take control remotely using Remote unified.
It shows that it might be the security settings of the computer at work. Would be better to answer this question in the Technet Forums. Please send the query in the link below.
It will be useful. If you encounter problems with windows in the future, please contact us.
-
I just got my old crash (desk top) computer. I knew it would, so I transferred all my information on an external hard drive. I bought a dell 2020 with windows 8, only bought a few days ago. I would use the external drive to download my photos, documents, etc. but do not know how to proceed. My old computer won't start at all, that's why I got the external drive. Could someone please help me with this task. Thank you.
Original title: confused
You can simply plug it in, connect the external hard drive, make sure it is turned on.
Then copy and paste on your files.
In Windows 8, start File Explorer
Highlight all the files and folders
Click on copy on the Ribbon (Home tab)
Then then paste into their respective folders
Press Windows key + R
Type: %UserProfile%
Press enter
-
I thought I downloaded the free software, but may not know how to start.
How to start the program? I received a PDF that I need to change and thought I had downloaded the free trial version, but does not know how to open it. When I try to open the PDF file I got, the computer says that I have to register a first copy of Adobe.
Adobe trial software has expired at the beginning
And PDF files is not really intended for editing, then everything you probably have in mind will be not feasible in any case. Well, at least not hacking, it comes with Acrobat.
Mylenium
Maybe you are looking for
-
Recovery Media Creator does not create system recovery discs
Recently purchased Toshiba Satellite C660-21Z and tried to create recovery discs, as recommended. Recovery media creator fails systematically on disk #1 and #2 with error messages when posting: Failed to read E:\sources\boot.wim (error Code 020150-20
-
Hello! First post since I'm confused ridicilously. I try to install Ubuntu 14.04 on the Thinkstation P500. He has completed the installation successfully and gets to the login screen of GUI with success as well. But when I try and connection, it is a
-
I need to download the drivers associated with my PC model . I tried in the official website of HP, but cannot find the driver from chipset, Bluetooth, USB. Please, help me.
-
I had an E3200 for over a year and all is well. I have a 128G USB plugged into the usb port and had no problem sharing the content with any user connected to the router. In the last 2 days I started to have access to the USB problem. When my WIN8.1 c
-
Connect to the router VPN using PPTP (Ubuntu)
Hello As I mentioned in other post, I try to get the VPN works for my Ubuntu workstation. I'm not an expert of VPN, so I need help. So far, people seem to agree that pptp is easier to config that IPSec (under Linux platform). Select the PPTP Protocol