computer overheating. dust cleaned and checked the fans

Similar Questions

• «the cpu fan works not.» Check the fan connections and call for service. »

  I was wondering if a failure of different from 'CPU fan has failed... system in a few seconds will stop. " I have an office of DX - 2000 P4 under XP SP3 that I just changed the motherboard and CPU fan on. All the fans are running at about the same speed. (P/S, chassis and CPU). Not very fast but cannot see the fins. Computer sat for several years. I was wondering what is the real test and how the fan speed is controlled. I suppose that temperature sensors built into the cpu, somehow, there must be a variable voltage applied to the fans to change their speed and/or a measuring device to see what is their RPM. This must be controlled by the BIOS as is any pass/fail test. My next step is to replace the old fan and see what happens. I have a new p/s to install should be here today. Actually used, but cleaned up and tested. Economy of cleanup. Not sure if my older diet could be the cause of the issue with low Volt.

  If the fan is slower than the factory fan, you will have this problem.

• I installed an external USB connected hard drive Seagate, it slowed the computer and check the new disc repeatedly

  Hello

  I installed an external USB connected hard drive Seagate to copy some movies and pictures of my HP laptop with Vista, but it became a big problem. It slowed the computer and check the new disc repeatedly. Then it wouldn't start without the external drive at all but it was working fine once he was conducting with the external hard drive. So thinking I can outsmart the computer, I uninstalled the drive from Control Panel. Now it primer not at all. The computer lights up briefly and then goes out of itself almost immediately, is there a solution to this? Thank you

  SOM

  Original title: startup problem

  Hi SomBhattacharya,

  Please try the possible fix following first thanks to Carey Frisch:

  1. open the BIOS of the motherboard.
  2. find where it says Priority Boot Device, then select CD/DVD-ROM 1, 2nd Hard Drive and disable all the rest.
  3 find somewhere in the BIOS where it says BOOT USB, Wake on USB, etc. and disable all unnecessary options.

  And second if it does not help, you can try the following with Blue Michael:

  Local Geek Squad had me intentionally set the BIOS to the correct order, then re-order and SAVE.
  It worked, even if the list of the BIOS was always in the right order.

  I hope this helps!

• Our office has 10 licenses for Adobe Acrobat Pro.  One of our computers crashed so we want to deactivate the license and reinstall on a new computer.  How can we check the serial number on Acrobat Pro installed on each computer to determine which series

  Our office has 10 licenses for Adobe Acrobat Pro.  One of our computers crashed so we want to deactivate the license and reinstall on a new computer.  How can we check the serial number on Acrobat Pro installed on each computer to determine what serial number is now unused?  I don't want to die with the computer software

  Hi John,.

  It is not possible to disable the license from one computer crashed or possible to check which serial number has been used on computer because they are encrypted.

  A retail license is good to be installed on 2 machines. I checked your account and found 4 different serial numbers of Acrobat registered for your account.

  It is always suggested to buy a volume license, if you have more than 2 machines instead of buy 4 different serial numbers.

  I checked all the serial numbers entered and you have sufficient activation count remaining to cover all your machines.

  Kind regards

  Rave

• PC telling me to install the network hardware and check the correct drivers is loaded

  I just installed Windows vista and I can not get Internet. He tells me to install any network hardware and check the correct drivers are loaded. I'm not smart with computers and jargon. So if anyone can help with this question, it would be appreciated. Thank you

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  If you have problems on which to install, contact the manufacturer of your computer.

  See you soon.

  Mick Murphy - Microsoft partner

• BlackBerry smartphones I bought the ECG app earlier today and checked the p...

  I bought the ECG app earlier today and checked the payment via paypal. The order number is XXXXXXXXXXXXX. The app is not then download. Is this normal? It was the first time I have baught something and don't know if it is wrong or not?

  (deleted order No.)

  Hi again,

  Maybe... but lets try other things first... Try these things...

  In some cases, it was discovered that updates/install (from got AppWorld apps) require additional steps in order to install the update. If the update will not install, please try this:

  1. Homescreen > Options > Advanced Options > Applications > highlight the app > BBKey > delete
  2. AppWorld > MyWorld > Login > highlight the app (if she shows at all, in any State) > BBKey > delete
  3. Use your PC (via the mass storage Mode) or your BB (via Media > BBKey > Explore) and find all references (folders, files) to the app delete everything you find. Search the memory of your device and your press card as well.
  4. Use this link to user guide AppWorld for re - install the app - then predict a new activation/registration key
  • http://NA.BlackBerry.com/eng/deliverables/7268/re-install_an_item_on_a_different_device_643962_11.js...

  Also, please try a hard reset: turn on, remove the back cover and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  In addition, you can try this sequence:

  (1) AppWorld remove your BB (Homescreen > Options > Advanced Options > Applications)-if she prays that you restart the BB to do.

  (2) a Batt Pull restart as described above.

  (3) get a new link and install a new copy of AppWorld

  • http://NA.BlackBerry.com/eng/services/appworld/download.jsp#tab_tab_download
  • Yet once, if he asks to restart, do.

  (4) restart another Batt-sweater

  (5) see if it works now.

  One of these will get I hope it will.

  See you soon!

• iPad - I forgot to turn off my screen before cleaning, and now the police is so great that I can't narrow it down to access the screen.

  iPad - I forgot to turn off my screen before cleaning, and now the police is so great that I can't narrow it down to access the screen.

  James,

  Double-tap the screen with three fingers and then go to settings > general > accessibility >... put the Zoom wide.

  

• With the 3.6.3 version I can no longer do a right-click with the mouse and check the properties of a direct url link on web pages

  Windows XP Pro, SP3. Firefox 3.6.3. Since the update to this version a few weeks ago, that I can no longer do a right-click of the mouse and check the properties of an active url link on Web pages. I've always had the option before. I want this feature back!

  This add-on restores the functionality of properties: https://addons.mozilla.org/en-US/firefox/addon/14228/

• Some keys on my MacPro keyboard have suddenly changed character. More precisely: move 2 product "instead of @;" Shift 3 product £ instead of a hashtag. and two RBI Maj @. I rebooted and checked the settings keyboard without result.

  Some keys on my MacPro keyboard have suddenly changed character. More precisely: move 2 product "instead of @;" Shift 3 product £ instead of a hashtag. and two RBI Maj @. I rebooted and checked the settings keyboard without result. It worked fine yesterday and has not been moved since then. What should do?

  Check the sources of the system/preferences/keyboard again.  You have active the British PC keyboard.  Remove it and make sure that you have only on the list.

• I was using my MacBook today and it crashed and the dock turned silv, I restarted the mac and it was always the same, then I loaded the disk utility and checked the disk and it says disk is fine. It flashes inconsistently gray and the dock turned

  I was using my MacBook today and it crashed and the dock turned silver, I restarted the mac and it was always the same, then I loaded the disk utility and checked the disk and it says disk is fine. It flashes inconsistently gray and the dock has transformed money! I tried to restore Mac OS and then also the same!
  OS El Capitan

  This can help:

  Reboot safe mode (it is a slow process):

  -stop of the mac

  -Start up the mac in shift, press and hold until you see appear it to progress bar, so you can let go

  -When everything started, connect

  -Once connected, stop the mac once again, nothing else is necessary.

  -restart normally.

  Lex

  PS: This clears all system caches.

• Component-level IP: generate and check the syntax error

  I tried to create a component for my device myRio level IP. I encountered this problem:

  File level information extraction superior synthesis. Please wait...
  
  Processing files...
  
  Vivado Simulator 2014.4
  
  Copyright 1986-1999, 2001-2014 Xilinx, Inc. All rights reserved.
  
  Running: C:/NIFPGA/programs/Vivado2014_4/patches/AR62969/vivado/bin/unwrapped/win32.o/xelab.exe xil_defaultlib.conf3B887A0FF22442ACAD7559670A4D090A-L xil_defaultlib-L unisim-L unimacro-L xilinxcorelib-L secureip-snapshot dll high - prj - clipsyn.prj
  
  Multi-threading is on. Using 6 son of a slave.
  
  Determine the order of compilation of HDL files.
  
  INFO: VHDL file analysis of [VRFC 10-163] 'C:/NIFPGA/iptemp/clip6BEF358BFCFF45AD8C68F5AB63F88A19/top.vhd' in the xil_defaultlib library
  
  INFO: [VRFC 10-307] analysis top part entity
  
  INFO: VHDL file analysis of [VRFC 10-163] 'C:/NIFPGA/iptemp/clip6BEF358BFCFF45AD8C68F5AB63F88A19/clock_div.vhd' in the xil_defaultlib library
  
  INFO: [VRFC 10-307] analysis feature clock_div
  
  INFO: VHDL file analysis of [VRFC 10-163] 'C:/NIFPGA/iptemp/clip6BEF358BFCFF45AD8C68F5AB63F88A19/pwmbuffer.vhd' in the xil_defaultlib library
  
  INFO: [VRFC 10-307] analysis feature pwmBuffer
  
  From static development
  
  Completed the static development
  
  Starting analysis of simulation data flow
  
  Filled with simulation data flow analysis
  
  Resolution for the simulation time is 1ps
  
  Compile the std.standard package
  
  Compile the ieee.std_logic_1164 package
  
  Compile the package ieee.numeric_std
  
  Compilation of behavioural architecture of the entity xil_defaultlib.clock_div [\clock_div (40000000,400000)------]
  
  Compilation of behavioural architecture of the entity xil_defaultlib.pwmBuffer [pwmbuffer_default]
  
  Compilation of behavioural architecture of the entity xil_defaultlib.top [top]
  
  GCC.exe: internal error: abandoned (collect2 program)
  
  Please submit a bug report.
  
  to get instructions.
  
  Correct the above error and check the syntax again.

  I have labview 2015 and vivado 2014.4 running on windows 8.1. Thank you in advance.

  Thank you for your response.

  I solved the problem. It is apparently caused by minGW installed with 14.4 vivado which does not work with windows 8. So, I replaced the minGW on vivado record 14.4 with the latest version of minGW.

• SE error message: remove and check the color cartrides in HP officejet v40

  Original title: officejet v40

  Can not connect my HP officejet v40. The printer says remove and check the color cartrides I did with no resilts. Please advise me how to do nest?

  Can not connect my HP officejet v40. The printer says remove and check the color cartrides I did with no resilts. Please advise me how to do nest?

  Hey pc owners

  Contact support to the installation of their products Hewlett Packard

  Walter, the time zone traveller

• Error message: problem loading parameters and check the event log or ask the administrator

  My wallpaper, the desktop icons and most of my documents are gone.

  I have Vista Home Premium and a couple of days and I connected my desktop background was changed. Several desktop icons are missing, and a message came up saying there was a problem loading my settings and check the event log, or ask the administrator (me) for more details. All my "Favorites" were missing in the sidebar and my documents and recorded images folders are empty. Microsoft customer service tells me there is an error in my code for the identification of product (from the Windows Activation in systems and Maintenance) so I can't help out.

  Any thoughts? Thank you!

  Hello, G25

  It is likely that your user profile is damaged. I would advise to create a new user account and test if you get any errors. If everything works as expected under the new user account, you can start to recover your account profile by following the steps on the following link: difficulty of a user profile is corrupted

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Dear all, in the follow-up to Massage exhange 2010 there is no option for selective date and time if we want to follow and check the delivery for 2 months mail report, then how, please guide

  Dear all, in the follow-up to Massage exhange 2010 there is no option for selective date and time if we want to follow and check the delivery for 2 months mail report, then how, please guide

  Hi Anandsable,

  The question you have posted is based on Exchange 2010, it is better suited in the Exchange Server forum. Please post your question in the following forum:

  http://social.technet.Microsoft.com/forums/en-us/category/ExchangeServer, exchangeserverlegacy.

  Hope the helps of information.

• Gap between the left and right columns. Both floated and checked the meansurements. Help!

  Gap between the left and right columns. Both floated and checked the meansurements. Help!

  Nancy - I think I might have fixed. I'll get back to you. Thank you very much for answering. Sometimes I feel so lonely there.