Computer says ADAM is allowed, authorization of the computer says that it is not!

Cannot change the ID of the seller. Computer says ADAM is allowed, authorization of the computer says that it is not. Can't open four e-books!

Please paste the capture of the error

Tags: Adobe

Similar Questions

  • I can't install service pack 3 for Win XP because my computer says that I am not allowed - see my administrator.

    I'm starting to load sp 3 and she's going through the installation but, by the end, a box appears that says that I'm not allowed and see my administrator.  It is a single computer; I sign as administrator (I even tried signature the administrator mode without failure).  SP 2 has been installed without any problems.   How can I solve this problem to install SP 3?

    I read somewhere that if this computer was used as a test for SP3 Beta site, it could be causes of the problem.  Does anyone know if this is true, and if so, how can I know if my computer has been used for the test.  I have no notes, but there is something in the back of my mind that says that several years ago, I sign up as a beta Test site.

    Hello

    1. have you downloaded the beta of Windows XP SP3 and installed version on the system?

    For more information about installing Windows XP SP3, see the link provided below.

    Steps to take before you install Windows XP Service Pack 3

    http://support.Microsoft.com/kb/950717

  • Computer to read DVD - one message says that I can not read the DVD, except that I have installed a new driver.

    I have a new Toshiba C650 laptop, and he says that I can not read the dvd on it except that I have installed a new driver. Is this true?

    Hi Bill,

    To be honest, this sounds ridiculous but if you get a message, I suppose it could be possible even if I find it incredible.  Do you have it in a (local or online) retail store or Toshiba?  By any chance did you upgrade from the DVD player when buying (where they may have accidentally neglected to update the drivers of the drive that was originally installed)?

    As it is new, Toshiba should help you with this.  Here's the contact page: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/navShell.jsp?cf=su_contact&pf=true.  Give them everything they need to prove that buy you it and it should be under warranty and then give them the message Word for Word, that you have found.  They should be able to help you.  They can, for some reason I don't know, you don't need to help or guide you through a new driver installation.  I ask for a clear explanation of why this is necessary on a new computer and, if you are not satisfied with the response, ask them to consider that all the faulty computer and replace it.  Even if they won't, he needs the get them less motivated to solve your problem.

    I hope this helps.

    Good luck!

  • Tried to restore to an earlier date, but whenever the computer goes through the process, but ends by saying that he could not make the changes. My system is XP Professional.

    McAfee, updated yesterday, Saturday, and now I have problems. Tried to restore to an earlier date, but whenever the computer goes through the process, but ends by saying that he could not make the changes. My system is XP Professional.

    Hello
    Have you done that you are connected under an administrator account?

  • I deleted Windows Defender on Windows Vista and tried to download and reinstall windows Defender but I gat a message that comes up saying that I should not install windows defender, because it came with the computer.

    deleted the windows on windows defender and impossible to reinstall! Message comes out and says that I should not install windows defender, because it came with windows vista. How can I try to fix it when I have windows Defender on my computer?

    You can not delete Defender in Vista.

    It is part of the Vista operating system.

    You can only activate / it:

    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

    Enable or disable the Windows Defender

    Many anti-virus have conflict Defender (McAfee, AVG, etc.), and turn it out / conflict with it.

    Microsoft Security Essentials, it turns off because it has its own version.

    See you soon.

    Mick Murphy - Microsoft partner

  • I cannot perform certain functions because he says that I'm not an administrator, but it's my computer and I'm the only one who uses this computer__

    I cannot perform certain functions because he says that I'm not an administrator, but it's my computer and I'm the only person who uses this computer

    What are the functions? More global changes (changes to the system, software installation) require an elevation in Vista/Windows 7.

    Changes to the built-in Vista administrator account

    http://support.Microsoft.com/default.aspx?kbid=942956

    User - recommended configuration (Vista and Win7) accounts

    You absolutely don't want to have only one user account. As XP and all other Windows 7, Vista, and modern operating systems are operating systems multi-user with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

    In particular, you do not want account only one user with administrator privileges on Vista and Windows 7 because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it may require more work you want to do. Better not to get into a bad situation at first.

    The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

    If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

    Start Orb > Search box > type: netplwiz [Enter]
    Click continue (or provide an administrator password) when you are prompted by UAC

    Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!

  • so I paid for a subscription to the photo shop, but then he says that he will not support my computer? now what?

    so I paid for a subscription to the photo shop, but then he says that he will not support my computer? now what?

    Check https://helpx.adobe.com/photoshop/system-requirements.html

  • I have firefox installed 10.0.2, but whenever I open firefox, I get a message that says that I do not currently use this version and I need to upgrade to the latest version and why firefox will not support mac print coupons

    my firefox info shows that I am using 10.0.2, but I get a message repeated when I open saying that I do not use the latest version.

    Though even the printer of coupon says mac firefox supports this facility it does not allow me to print it.

    Hi cleopt,

    You can see this message under the Google search box on www.google.com/firefox which is the old default Firefox homepage. This page is no longer maintained by Google.

    You should try to change your home page:

    topic: Home

    If you don't know how to change the home page, you should take a look at the Knowledge Base How to set the home pagearticle.

    Hope this helps

  • my laptop says that it is not connected to the internet

    Original title: network programs network networking Internet Web site Site Web Web Site URL

    Can someone help me; my laptop says that it is not connected to the internet, I can't understand the wireless problem but my daughter's laptop connects fine.
    It brought me to this site in question--but is not on the internet? So why he says I am not connected? What is happening lately, it worked fine before?

    Hi Lgbeerle,

    1. What is the operating system installed on your computer?

    2 have you made changes to your computer recently?

    3. where are you getting this error?

    You can access this forum on the Internet. To resolve this problem, I suggest you follow the link and check if it helps.

    Windows wireless and wired network connection problems

    I hope this helps.

  • I can't download and install updates to Windows or games on the internet. I get an error saying that I am not on the internet.

    I can't download and install windows update or games on the internet, I get an error saying that I am not on the internet, when I help

    Trinity

    Hello

    1. what operating system do you use?

    2 did you change on your computer?

    3. what version of Internet Explore do you use?

    Method 1:

    If you are using windows 7, I suggest you check in SafeMode with network.

    Advanced, including safe mode startup options

    http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

    Method 2:

    I suggest you of due to windows update, please see the link.

    Problems with installing updates

    http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

    Method 3:

    I also suggest you perform the clean boot and check.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    See also:

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Why can't I connect to the Internet?

    http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  • How to create a guest account? I followed the instructions and it says that it does not recognize the user!

    I followed the instructions to create a guest account and it says that it does not recognize the user's address or the password.

    Hello

    1. What is the operating system installed on the computer?

    2. are you trying to create or attempt to activate the guest account?

    3. How have you tried to create the guest account?

    4. What is the exact error you get when you try to create the guest account?

    Perform the steps in the articles to create a guest account and check if the problem is solved or not.

    Turn the guest account on or off (Windows 7)

    Turn the guest account on or off (Windows Vista)

    Hope that helps.

  • My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM.

    My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM. It is said it can be repaired by using the original installation CD, but we do not have. Any ideas please?

    The file is missing or corrupt is one of your files in the system registry.

    By far, the best way to recover from this is to go to another computer and create a free Hirens Boot CD.
    Download Hirens: <> http://www.hirensbootcd.org/download/ > (link at the bottom of the icon of the disk)
    Hirens CD burning <> http://www.hirensbootcd.org/burning/ >

    Once you create the CD, and then start your system of problem with this CD.  In the first window, select "Mini Windows XP" and wait for the system to start.  When it starts, go to the Hirens Boot CD menu and select
    Register-> Registry Restore Wizard.
    then follow the prompts.  This wizard will return a copy of your registry database from backups that are stored with your system restore points.  After the restoration, stop, remove the CD and restart.

    When you start your system, it is recommended to perform a system restore operation to ensure the consistency of your system
    "How to restore Windows XP to a previous state"
       <>http://support.Microsoft.com/kb/306084 >

    Also, this error is almost always accompanied, if not caused, the corruption of the file system.  Also a good idea to perform a check disk (chkdsk) operation with the option "repair".
    "How to perform disk error in Windows XP check"
       <>http://support.Microsoft.com/kb/315265 >

    The hard way to get back is covered in the following Microsoft KB article, but if you have installed a large number of service packs for your installation of XP, I don't give you many chances to get past part 1. (And there's also an installation CD to access the Recovery Console)

    "How do I recover from a corrupted registry that prevents Windows XP boot"
      <>http://support.Microsoft.com/kb/307545 >

    HTH,
    JW

  • When I try to connect to the net on my laptop LG I often get the message saying that windows could not connect.

    Windows does not remember the setting.

    When I try to connect to the net on my laptop LG I often get the message saying that windows could not connect and I have to go into the advanced settings and check the box that says allow windows to configure the network. My problem is that windows doesn't remember this setting and that I need to check the box almost everytime I try to connect. He made it with my desktop so I was wondering if anyone has a solution for this.

    Using a wireless router? What is the brand and model of your router? I don't think it's a matter of windows.

    Troubleshooting in windows wireless network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

    Hope this helpful. Post back if your problem is not resolved in the link above.

  • I want to uninstall this program but it says that it could not be removed because of the error, it is the program (/ Applications/exPressit H.E. 2.1/UninstallerData/Uninstall exPressit H.E. 2.1.app)

    I want to uninstall this program but it says that it could not be removed because of the error, it is the program (/ Applications/exPressit H.E. 2.1/UninstallerData/Uninstall exPressit H.E. 2.1.app)

    Hello

    What is the exact error you receive everything trying to uninstall this program?

    Try to Uninstall the program in a clean boot state.

    From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

    Reference:

    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    1. click on start and then click Run.

    2. type msconfig and click OK.

    The System Configuration Utility dialog box appears.

    3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.

    4. When prompted, click on restart to restart the computer.

  • Remove the Windows Vista so that the upgrade can continue. He says that I can not upgrade both on the drive.

    I had to have my hard drive replaced and the company that made him put two versions of 32-bit and 64-bit Vista Home Premium on it.  Soon, I discovered that I was getting conflict on my computer and he discovered that the two were on the hard drive.  I'm trying to upgrade to Windows 7, but I'm at the stage where it tells me to seek answers on the removal of Windows Vista so that the upgrade can continue.  He says that I can not upgrade both on the drive.  I know the other option is to do a clean business, but I would avoid this possibility if possible.

    need an answer as soon as possible... Thank you

    I had to have my hard drive replaced and the company that made him put two versions of 32-bit and 64-bit Vista Home Premium on it.  I soon discovered that I was getting conflicts on my computer and discovered that the two were on the hard drive.  I'm trying to upgrade to Windows 7, but I'm at the stage where it tells me to seek answers on the removal of Windows Vista so that the upgrade can continue.  He says that I can not upgrade both on the drive.  I know the other option is to do a clean business, but I would avoid this possibility if possible.

    need an answer as soon as possible... Thank you

    Hello

    The best way is to clean install and start over.

    In addition, it is not legal to have both installed version that the license is for a single installation.

    If it is a dual boot with 32 bit and 64 bit installed on different partitions, there would not have been the conflicts you would have never started in one or the other.

    See you soon.

Maybe you are looking for