concatenate files

Similar Questions

• JPEG CONCATENATE files

  Hello

  I wan to learn jpeg CONCATENATE files. I wrote a code on this subject, but my solution is not good solution for concatenating files jpeg. My code can only show my jpeg files step by step. First of all, copy the following code may show first jpeg after second jpeg so now... This code is a kind of jpeg CONCATENATE files but I want to see all same time with sameviewer of jpeg files.

  In fact, I want to do the adding files jpeg 5 or more (same size 600 x 600) and then I want to see all jpeg files use lid sliding on the jpeg viewer. What is the best solution for this?

  Best regards

  Kadir AYHAN Can

  Comp. Eng. /Turkey

  new user for LABVIEW

  No: this code created by labview 09 and you need to open the same directory with JPEG files. Your jpeg files should be the same size of pixel for ex: 600 x 600 (I send it)

  Hi kacco,

  It will work for you?

  Thank you and best regards,

  srikrishnaNF

• How to concatenate files of CT in DiaDem

  I saw the post on how to concatenate CSV files on tiara... but how do concatenate you files TDM together?

  I am surprised that this feature is not built into the software as it is a fairly common task, and the script is probably beyond the capacity of most of the user to maintain.

  Hello Colin,

  There are several examples that you can use to concatenate the data channels in DIAdem.

  This one is on the site:

  http://sine.NI.com/DevZone/CDA/EPD/p/ID/3870

  Another good example is included in the tiara and accessible from the help > menu examples. From there on, drill down to the folder: "examples > scripting > Scripts > add channels to each other.

  Between these two examples, we should hopefully take care of your issue.

  Best regards

  Otmar

• How to upgrade the file name in a loop

  Hello

  I try to use the value input (voltage, current) as file name in a while loop. the voltage and current are increment in the while loop.

  I want to save a file in each iteration and the name of the file is C:\voltage_current.csv.

  Someone at - it how to update the name of the file in a loop?

  Thank you

  Tian

  The easiest way I can think of that would add to what follows in the loop: number in fractional string to convert these values into strings and String Concatenation to create the correct file name.  Also concatenate file name with the path of your backup location.  Finally convert the string path.

  Unfortunately my current computer is not installed LabVIEW, so I can't create a nice demo.  But you should be able to wire just those together without too much confusion.  It will look as follows:

  ["C:/path/goes/here/"] -----------------------> [                      ]

  [voltage]--> [fractional number string]--> []---> [string path]-->

  ["_"]    -------------------------------------> [       String         ]

  [current]--> [fractional number string]--> [concatenation]

  [".csv"] -------------------------------------> [                      ]

  The only question I could foresee is if you come across the same voltage/current.

  For example:

  -Voltages and currents

  1                    2

  2                    2

  3                    2

  4                    2

  1                    2

  You may obtain the names of files as follows:

  1_2.csv

  2_2.csv

  3_2.csv

  4_2.csv

  1_2.csv * error.  Depending on your settings, this results in the file overwritten, raise an error or be added.

  Take this into account if you have not only different combinations for each file.

• Dynamically naming a file using a send in B2B operation

  Hello
  
  I use a send in B2b adapter operation that deletes a file in a particular location.
  The time now its filing a file as default to standard naming by B2B.
  I just wanted to know that is it possible where we can do it dynamically?
  for example - to search for a value in the file and concatenate file name model who is in B2B?
  need a solution.
  
  Thank you!
  
  Kind regards
  Shreya.

  That's what I mentioned. Set the file name of middleware with header file name and make sure you select "preserve filename" in your channel. B2B will use the name of the file passed in the header of middleware, as the name of the file to write to the directory.

  Kind regards
  Anuj

• Oracle EBS 12.1.3 models, concatenation of files takes too long

  Hi guys
  I installed Oracle VM Server (3.1.1) and VM Manager (3.1.1) and now proceed to the part of concatenate files as mentioned with the 'readme' under download section model.
  
  «Concatinate and extract the .tgz files.» This step creates a directory
  with the name of the template that contains all the files for the
  model. »
  
  
  Cat OVM_OL5U6_X86_64_EBIZ12.1.3_APPS_VIS_PVM.tgz.0
  ------OVM_OL5U6_X86_64_EBIZ12.1.3_APPS_VIS_PVM.tgz.1
  ------OVM_OL5U6_X86_64_EBIZ12.1.3_APPS_VIS_PVM.tgz.2 | tar - xz
  
  for the application tier. I run this from a terminal (logged as root). As soon as I start this process, I get a pop-up indicating missing fonts (probably because of the command cat attempts to display the content of the files) and application layer concatenate process runs from last several hours. I checked the disk and nothing has yet been written to disk.
  
  My environment: VMWare player = > Oracle linux 6.2 (64-bit) = > VM Manager up and running 3.1.1, VM server hung upwards and both instances (Server VM VM Manager) servers communicate with each other as expected!
  
  Please confirm if this is a normal behavior
  
  Kind regards
  
  REDA

  PL try the entire command in a single line without using the continuation marker (\) - like this

  cat OVM_OL5U6_X86_64_EBIZ12.1.3_APPS_VIS_PVM.tgz.0 OVM_OL5U6_X86_64_EBIZ12.1.3_APPS_VIS_PVM.tgz.1 OVM_OL5U6_X86_64_EBIZ12.1.3_APPS_VIS_PVM.tgz.2 | tar -xz
  

  HTH
  Srini

• Save the file format - suddenly of problems

  Hi all

  I've been using PSE9 on my iMac Intel (OS 10.5.8) for a few weeks, and yesterday I started having the following problems:

  (Full edit mode)

  (1) when you try the command "save under" after working on an image, I received a message saying that my account was not allowed to make changes, but there is only one account on this computer.

  (2) shift-command-S brings to the top of the window save slot, but no matter what format I choose, it remains .jpg! I tried on a couple of different pictures, the same results.

  Initially, I was able to save in PSD format, when I moved the new file to a different location, which is instead to save the new file in the original folder, I copied on the desktop, but it doesn't now.

  I opened the preferences of the PSE for saving files and checked concatenate files with extensions 'always' and 'OK', but when I return to the same panel preferred, she is forever, which is the default position. I wonder if it's the source of my problems.

  I tried:

  Place the files preferably for DSP and organizer in the trash and the re-launch of PSE9.

  Rampage of preference files, then by restarting the computer and restart PSE9.

  Uninstalled PES 6.

  Uninstalled PES 9 and performed a reinstall from the CD. I could file save as a PSD for a day, now back to the same situation, always also receive an error message if I try to save a JPG file in the folder of origin for this image.

  What should I do next?

  Martin

  I opened the preferences of the PSE for saving files and checked concatenate files with extensions 'always' and 'OK', but when I return to the same panel preferred, she is forever, which is the default position. I wonder if it's the source of my problems.

  Yes. This is a known bug. Your options are in the trash the prefs once again and never, never, never open the saving files preferences panel again (just go there cause this), or to add the file extension in manually when recording. (The default position is Always, but simply opening the files preference saving assigns never.)

• Max and min to find examples of data

  I'm discerning the max and min of cycle data values. We have about 20 data points for each cycle and I need make the max and min out of it. I tried to write a script for this but it takes way to long to run. Do not complete our largest files (over 1 million points of data) with my script and DIAdem crash.  I also tried the peak built by finding functions, but they come with data points that are not max or min. Here is my script below:

  Dim cyclemin
  Dim cyclemax
  Dim cyclecount
  Dim displacementmax, displacementmin
  Dim channelcount
  Dim i, j, k, g, a, m
  cyclemin = CMin ('Cycle Count')
  cyclemax = CMax ('Cycle Count')
  ChannelCount = 0
  Call ChnAlloc ('Single Cycle Count',(cyclemax-cyclemin) + 1, 1, DataTypeFloat64)
  Call ChnAlloc ("pressure min. sample",(cyclemax-cyclemin) + 1, 1, DataTypeFloat64)
  Call ChnAlloc ("Sample pressure Max",(cyclemax-cyclemin) + 1, 1, DataTypeFloat64)
  a = 1
  For cyclecount = cyclemin to cyclemax
  g = 1
  ChannelCount = channelcount + 1
  I = ChnFind ('Ch ()' ' Cycle Count"" "") = "& str (cyclecount)(,a)"
  j = ChnFindReverse ("Ch (" 'Cycle Count) "" ") =" & str (cyclecount), CL ('Cycle Count')) "
  Dial the ChnAlloc ("sample Pressure data retention", (d - i) + 1, 1, DataTypeFloat64 ')
  For k = i j
  ChD (g, "" data keeps the pressure of the sample "") = SMC (k, "Sample pressure")
  g = g + 1
  Next
  Call the ChnCharacter (' "data keeps the pressure of the sample" ")
  ChD (channelcount, ' Single Cycle Count "" ") = cyclecount
  ChD (channelcount, "Max pressure sample") = CMax ("Data Hold sample pressure")
  ChD (channelcount, "pressure min. sample") = CMin ("Data Hold sample pressure")
  Call the ChnDelete (' "data keeps the pressure of the sample" ")
  a = j
  Next

  Can someone please help me find a way to do it quickly? Thank you.

  Hello Steinmeister85

  just in case you are using a newer version of DIAdem, here is an alternative solution.

  Also, I used your example file and it concatenated 50 times to create a file which has about 560,000 values in each channel.

  I run your script from a new one to get a reference number

  Sample file

  Original screenplay: 2.5 seconds

  Optimized script: 0.2 seconds

  50 x example file

  Original screenplay: 111,493 seconds

  Optimized script: 0.25 seconds

  I have to admit that I've sorted the concatenated file. This way I have 216 cycle segments to be analyzed. If I simple concatenate files (without sorting) I get 50 x the number of segments and the new script takes about 9 seconds to execute. The original script doesn't work properly like you woul then have to repeat the cycle count numbers in different areas of the channel...

  I hope that the new versions work for you.

  Andreas

• Concatenate with DIAdem TDMS files, depending on the time

  This question is in French and English.

  Hello

  I'm trying to find a way to concatenate/merge several files TDMS analog measurements with DIAdem 2012, in order to have more than one file. I be provided with attachment 1.

  I am beginner in DIAdem and don't know not the language of the script code. En 986KO on this forum, I found the script 'Import data from several Files.VBS use', and changed lines 17 and 18 not 'csv' by replacing "tdms" (as it was stated on another topic on the forum). This script also appealed to "concatenate groups."

  The problem is that the TDMS files contain several groups (the slots on frame of measures Canada) each containing several different channels. This script concatenates so each group and the result makes more sense the script to modifier is certainly "CONCATENATE Groups", but in what way?

  Thank you

  Olivier

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  I'm trying to find a way to concatenate/merge several files TDMS analog measurements with DIAdem 2012, in order to have at the end only one file. You can find these files with my mail 1.

  I am a beginner in tiara and do not know the language of the script code.

  By searching on this forum, I found the script 'Import data from several Files.VBS use' and changed lines 17 and 18, replacing 'csv' by "tdms" (as demonstrated in another topic on the forum). This script also uses "groups of concatenate.
  The problem is that the TDMS files contain several groups (pointing to the slots on the frame measurements), each containing several different channels. If this script concatenates each group and the result is meaningless. I think the script that needs to be changed is "CONCATENATE Groups", but how?

  Thank you

  Olivier

  Hi Oliver,.

  Try to run the script you downloaded once for each group and encodinng group to load in the assignment of "ChannelSet" in line 10 using the index group, like this:

  ChannelSet = "[1] / *" or ChannelSet = "[2] / *".

  I just found out that this example breaks in 2014 DIAdem because the 'DataFileHeaderAccess' command has been relegated and replaced by a new.  I need update soon.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• How to concatenate strings with the lines of a text file

  Hello
  I tried concatenate strings with the lines of a text file, but something is wrong with my code and I belive is the agruments I use in the cycle for. If anyone can help me I will appreciate it very much.
  My code is:
  [code]@echo off
  the value "input=C:\Users\123\Desktop\List.txt".
  for /f "usebackq tokens = *" % in (' input % ') do)
  the value 'str1 = C:\some directory\ ".
  the value ' str2 = %% ~ F '.
  the value "str3 = .pdf".
  the value "str4 = str1% str2% str3%.
  echo.%STR4%
  ) [/ code]
  and the text file is something like:
  121122 [code]
  122233
  123344
  124455 [/ code]
  But I get only one wrong answer and I have to run it like 3 times to get a real result and it is a mistake, the first two are empty spaces and gives the third one as the last line of the text file but repeated n times, where n is the number of lines in the text file.
  Result:
  [code] C:\Users\123\Desktop>concatenate.bat
  C:\Users\123\Desktop>concatenate.bat
  C:\Users\123\Desktop>concatenate.bat
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\Users\123\Desktop>[/code]
  So if anyone has an idea about what is wrong please let me know.
  Concerning
  -Victor-

  Hi Victor,

  This forum is dedicated to the support of the Office of consumer Windows (fonts, colors, personal settings).  Since your question is about programming and usually outside the context of most of the customers, I suggest you post your question in the forums as http://msdn.microsoft.com - the Microsoft network to users will be more adapted to help you in your quest.

• CONCATENATE HTML files

  How to concatenate several html files into a single file? Thank you!

  Someone gave me this answer that worked. Probably, there are two ways to approach this task. Thank you!

  
  

• How can I copy the list of names of files in the finder and set the Clipboard filenames separated by commas?

  Hi guys, I was wonder if anyone can give me a hand with a script.

  I need to be able to paste a list of file names of the files as follows:

  0001.jpg 0002.jpg 0003.jpg 0004.jpg

  At the moment, if I select the files in the Finder, copy to the Clipboard and paste them in TextEdit, they are like this:

  0001.jpg

  0002.jpg

  0003.jpg

  0004.jpg

  I found a similar but slightly different script and I don't know how to change it. Here it is:

  Define extension_list to {"jpg", "" JPG","jpeg","JPEG"}

  the value cbNames (Clipboard text) paragraphs

  Set csvNames to {}

  the tid value delimiters to point to the text of the AppleScript

  the text value of the AppleScript point delimiters ".»

  -now, make a list of names without extensions

  Repeat with the names in cbNames

  If the point 2 of the text names is extension_list then

  copy of text 1 of names at the end of csvNames

  end if

  end repeat

  Journal csvNames

  -now the filenames as comma CONCATENATE string separated

  the text value of the point delimiters AppleScript «»

  csvNames value cross-as text

  the text value of the point AppleScript delimiters tid

  There is an easier way. Open a TextEdit document and paste the list in. Place the cursor at the end of the first item and drag it to the start of the second.

  

  Press on + command + c to copy and then command + f to bring up find it. Press command + v (do not click in the first search field). Check the 'Replace' box, click in the field replace, and then type a comma and a space.

  

  Click 'All' and then 'done '.

  

• How to remove characters from a file name using applescript

  Hello

  I use an AppleScript to write files from an application.

  The files are written as JPEG and PDF files

  I want to omit parts of the name of the JPEG file

  Name of the file looks like this, 70618_MEN_327926_2200x3480_1.jpg

  I need to be renamed on output, 327926_1

  That is to say, delete all characters to the end of the second line of underscores, so all characters after the third underscore and leave all the characters after the fourth underscore character.

  Hello

  You can use a Manager, like this (Manager contains explanations):

  ------------------------

  tNom set to "70618_MEN_327926_2200x3480_1.jpg".

  Set newName to my getChars (tName)

  -the result is "327926_1.jpg".

  on getChars (t)

  value {oTid, point text delimiters} {text item delimiters, '_'}

  the entire at t text elements - divide the text using the line underscore as separator, the result is a list of items

  If (count l) > 4 then - at least 4 characters to underscores

  the charsAfter4_ value to (points 5 thru - 1 l) in the form of text - the text after the fourth underscore

  the value charsBetween2_3_ in section l 3 - the text between the second and the third underscores

  the value t charsBetween2_3_ & "_" & charsAfter4_ - concatenate two strings

  end if

  set the text of the delimiters to oTid - reset point of text delimiters

  return t

  getChars end

• Merge with VB Script ascii_diadem_9.1_or_later.zip .csv files: how to add the column/channel with filename

  Hello

  I use ascii_diadem_9.1_or_later.zip to merge the data from several .csv files.

  The problem is that I am so some weird futuristic timestamps in a channel

  which do not appear in the original .csv files:

  How to adjust the VB Script automatically adds a new channel to the a .csv resulting

  file with the original name of the .csv file for debugging purposes?

  Any help is greatly appreciated!

  Thanks, Katharina

  Hi Katharina,

  What happens when you drag your tiara BROWSER or Windows Explorer data files in the data portal?  See all date/time values in a table in VIEW of this channel?  The problem may be that you do not have a use but which properly load your data files.  The example is designed to show you how to concatenate several files of data together, but assumes that you could provide / have your own use.  If you use work already, then look for these lines to the top of the VBScript and substituting the name of your use "CSV".  If your files have a file extension different "*.csv", then you must also change the line "FileExt '.

  FileExt  = ' CSV files, *.» CSV »  ' « *. DAT; *. CSV '.
  
  Use = "CSV"  ' "' or 'SpecificDataPluginName '.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Write to the file of text formatting issues

  My apologies if I touch on a topic that is discussed elsewhere.  I have two questions, which seems to be related, I'll have to overcome the difficulties.  I date of blood collection, converting it to a temperature and then writes the timestamp, temperature, voltage, and original tension to the file.  Currently, when I write these values to the date and time of the file appear on a single line, temperature and tensions appear on the next line, and then there is a space before the pattern repeats.  In addition, before data are collected I write information in a header, and if you look at the .csv file attached, you will see that the data are that all offset a column to the left.  Any ideas how I can fix this problem?  My code is probably speaks for itself, but I really am a novice, so any general idea in the non-jargon terminology will humbly accept.  Cheers, Peter.

  GEO,

  Do not build your strings in an array of strings.  An array of strings are written a / line in the function "write text to a file.

  Use the function to concatenate strings and string together a tab character between the date/time and the first value.  The "write text to file function will add its own chain of end of LIFE at the end of writing.