Conductor with virtual TP and CUCM

Similar Questions

• Does anyone have experience in collaboration with virtual offices and CC?

  I connect in a virtual desktop with VMware Horizon customer, once on the desktop, I have access to the suite of apps CC. Given that desktop apps have been upgraded in CC responsive Fund rate is very slow. It takes way to long for the registration of a click or movement to occur. Windows that I always move in motion once the mouse has been released. Anyone know of a solution or conflict between CC and VMware?

  Industrial Hi,

  We have little support for environments virtualized - limits of technical support for the server-based or virtualized environments

  I use vmware and have not yet tested the new features here. It affects all applications. If I come across something I think can help, I'll let know you.

  Thank you

  -Dave

• Best way to allow the new 64 bit Vista Home Premiun PC to work with the software and virtual private networks more elders with unsigned drivers?

  I just bought a new HP PC with Intel E5300 without experiencing compatibility issues with several current VPN as well as blocking drivers not signed properly.  I heard of the Virtual PC as well as the ability to install Vista 32.  What is the simplest, lowest cost way to make this existing work of PC with VPN and unsigned drivers as soon as POSSIBLE with performance at least equivalent to a Pentium 4 2 GHz with 2 GB of RAM?

  http://support.Microsoft.com/default.aspx/KB/946765

  Read the above info on drivers.

  The driver signing

  Unsigned drivers can be used with 32-bit versions of Windows Vista.

  64 bit versions of Windows Vista require that all device drivers be digitally signed by the developer.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  ·                         http://www.Microsoft.com/downloads/details.aspx?FamilyId=04D26402-3199-48A3-AFA2-2DC0B40A73B6&displaylang=en

  Virtual PC 2007

  Download the full version of Microsoft Virtual PC 2007.

  Buy and install a Windows operating system earlier (XP, Windows 2000) in the above Virtual Machine and try to run your program in that.
  Vista Home Premium is not supported by Microsoft using Virtual PC above, but Virtual PC will work in it.

  See you soon. Mick Murphy - Microsoft partner

• Upgrade CUCM 10.5 and 11.5 with Mediasense, UCCX and confirmation of the highway

  Hello everyone, I'm looking to upgrade CUCM 10.5 to 11.5 and try to find out if the version of Mediasense, UCCX and highway are supported and to confirm with the experts that I am mistaken.

  Currently I have the following text:

  CUCM/CUC - 10.5

  UCCX - 10.6.1

  MediaSense - 11.0.1

  Highway - 8.5.1

  So based on the documentation below if I go to CUCM 11.5 UCCX must be upgraded to version 11 and highway be upgraded to 8.8? MediaSense is ok here its version 11?

  http://www.Cisco.com/c/dam/en/us/TD/docs/voice_ip_comm/uc_system/unified...

  Thank you

  Dan

  ORC evolving documents now States that UCCX 10.6 (1) can be compatible with 11.5 (1) CUCM (plus all patches) after you install the ciscouccx.106x.cucm11xcompatible.14.cop.sgn hotfix.

  http://www.Cisco.com/Web/software/280840578/114618/Readme-UCCX-1061-UCCX...

  -Alex

• I installed windows 7 on a mac with boot camp and then used parallels to create a virtual machine to run windows inside Mac os10.6. Now he says I need to activate windows again, but he said I need a new activation key. Any ideas would be appreciated

  I installed windows 7 on a mac with boot camp and then used parallels to create a virtual machine to run windows inside Mac os10.6.  Now he says I need to activate windows again, but he said I need a new activation key.  Any ideas would be appreciated

  Yes, you must purchase a full license for the second installation of Windows 7 product key.  1 activation allows only one Windows 7 product key.  Apparently, you now have a second facility that requires a second product key. Carey Frisch

• You can install Windows Virtual PC and Windows XP with Windows 7 Home Premium Mode?

  Windows 7 Home Premium with Windows Virtual PC and Windows XP Mode.

  I'm currently under Vista Premium and just-ordered Windows 7 Premium.  I noticed that Microsoft offers only the XP Mode in their professional, Ultimate and Enterprise versions. Once I've upgraded to Windows7 I will be able to download and install Virtual PC and XP mode and make it work in my Premium version manually?  Yes my AMD BIOS supports.  Thank you!

  Only, you would have the same problems with 32-bit software in a 64 bit environment where it may or may not work as the others. XP mode is reserved for people who have a software who refuse, for some reason, to upgrade and that run only under Windows XP. But if you consider that Windows XP was introduced in 2001 and it is now 2009 and 1 other OS released and another is about to release... it's time to upgrade. Jonathan Matthis aka "7test" on MSN QnA
  Chief Administrator of the Site
  Windows 7 QnA
  http://Windows 7qna.ning.com

• Managed to install XP Mode but cannot find "Windows XP Mode" in the folder "Windows Virtual PC" and also cannot find any file with the extension of the vmc

  Dear friends,

  I'm using Windows 7 Ultimate 64 bit

  I'm really happy with the answers given on this subject, but after the installation of "WindowsXPMode_en - us.exe" and "Windows6. 1 - KB958559 - x 64 - RefreshPkg.msu ".
  installation went well but I can't find any file on my computer with vpc extension, and I don't see the Windows XP Mode folder in Program Files.
  When I try to reinstall, I get the message that it has already been installed.  In folder options, I enabled see all files including system files.
  Thank you!

  Thank you very much!!!

  After I posted the question (and struggled with the issue for a while),
  I decided to uninstall Virtual PC and XP Mode, and then when I reinstalled
  them everything was fine.
  In any case thanks for the elaborate and useful response which I'm sure
  others will benefit from it.

• To work with a SAN and vMotion virtual servers configuration

  Hi all:

  I apologize in advance if this discussion is too much like another.

  I intend to use the following configuration (not yet deployed) and would appreciate your comments and input:

  2 physical host servers running VMware ESXi

  1 SAN Fiber Channel

  high availability and vMotion

  I just have a few questions:

  (1) then I keep all the VHD on the SAN files?  (I intend to have VHD files separate OS disk and DATA drive for each virtual computer).

  (2) is it recommended that I have all the hard drives the on host computers physical (to run virtual machines or anything else like swap files)?

  (3) how much space I have on the SAN?  I guess too much for the readers of the OS and DATA readers of all virtual machines... it's any additional space recommended for anything?

  (4) everyone would be able to direct me towards guides describing how to set up?

  Sincerely,

  Kahn

  (1) then I keep all the VHD on the SAN files?  (I intend to have VHD files separate OS disk and DATA drive for each virtual computer).

  Yes you can, and just a tip, on VMware world the virtual disk is called VMDK :-)

  (2) is it recommended that I have all the hard drives the on host computers physical (to run virtual machines or anything else like swap files)?

  You can use the same physical host computers without the hard drive, because you can boot from SAN, or use features such as automatic deployment, but it is the facility for the virtual machine, my recommendation is to use disks (volumes) of your San and share this volumes between your hosts to be able to configure High Availability (HA). Without shared storage, you can not HA.

  (3) how much space I have on the SAN?  I guess too much for the readers of the OS and DATA readers of all virtual machines... it's any additional space recommended for anything?

  Space on SAN depends on the size of your virtual machines and little extra space to make room for Exchange and snapshot files.

  (4) everyone would be able to direct me towards guides describing how to set up?

  The documentation will have everything you need: VSphere 6.0 Documentation Center , but if you want some guide step by step and with video/screen, see this one: BackToBasics | Mike Landry...

• Help to get a list of virtual machines with switch network and name

  I'm trying to get a simple list of virtual machines on a single host and include their name and networkname.

  When I run this Get - vm | where {$_.} $host.name - eq "ESX.local"}, I get the virtual machines with their name.  When I run this Get-networkadapter - vm Get - vm | where {$_.} $host.name - eq "ESX.local"} I download news network with the name of the network, which is what im after. "  I want to combine these 2 commands and get vm name and network name in a csv.  The network name is the Group of ports, the VM is affected change settings for example, it could be vlan10 or what you named your group of ports in the switch DV.  I've attached a screenshot of the orders successfully.

  Hello, brisketx-

  You could do a little more efficiently by getting first the VMHost (s) that are of interest, then get their virtual machines and then using a computed property for the names of network for virtual machines.  As:

  Get-VMHost esx.local | Get-VM |    Select-Object Name, @{n="NetworkName"; e={(Get-NetworkAdapter -VM $_ | %{$_.NetworkName}) -join ","}}
  

  You can then, of course, lead to Export-Csv to write the data to a CSV file.  How does do for you?

• Problem with the mouse and the network after the upgrade VMware Tools and hardware to virtual machine

  Hello world...

  I just upgrade my ESX 3.5 servers to vSphere 4.1. All this work is very well with the upgrade right now.

  After that, I tried to mise a niveau of VMware Tools and hardware of VM for my virtual machine and the problems started.

  I tried with two different VM (the two Windows 2003) and the problem appears for the two VM.

  I don't want to test another VM of the different operating system now, I'm afraid to go too far with update of Pentecost the problem I have now.

  I tried two VM to be sure that the problem is not only on a virtual machine.

  First of all, the mouse.

  My mouse has jerky movement. The button works, but sometimes I have to click several times to select what I want.

  I tried to uninstall the mouse in Device Manager and reinstall, but not really Pentecost improvement which (buttons works better, but... not so sure).

  Second problem.

  After you restart the server after VMmware tools and hardware virtual machine, the network link not working anymore.

  When I go to my network card configuration, IP settings are reset in DHCP mode.

  If I go again all my IP settings, Windows says:

  The IP address is hidden from the network and Dial-up connections

  folder because it is not physically in the computer or is a riser

  It does not work. If the same address is assigned to both adapters and

  they become active, only one of them will use this address. This may result

  in the incorrect system configuration. You want to enter a different IP address

  address of this adapter in the list of IP addresses for this card in the list

  Advanced IP address in the dialog box

  If I answer Yes to this, I have to enter a new IP address, and of course, this is not what I want to do.

  If I don't answer, the network working again.

  I think it is a strange message but the work of the vSphere maybe network now.

  Anyone have any idea why my work network and mouse as this upgrade after.

  All other VM that is not upgraded so far works great.

  Thanks in advance...

  (1) make sure that your hardware acceleration is safe enough. I got the upgrade down my hardware acceleration several times already.

  (2) sounds like the new drivers for your NIC cards took over and VMware is basically a new card NETWORK for you. Follow these steps to disable it:

  (a) open a command prompt

  (b) type (without quotes): 'set devmgr_show_nonpresent_devices = 1' and press ENTER.

  (c) type (without the quotes): "start devmgmt.msc"

• Restore the virtual hard drive backup on a different node with different IP and host name.

  Hi guys,.
  I want to do the following.
  
  My reliable backup strategy is the virtual hard drive backup. The database is installed on a virtual particulay machine (node). Now, I do not take the backup of the DBF files or control files or files from archive.
  I rely on the virtual hard disk backup. It takes the entire Virtual Machine backup. Now, I wanted to restore this virtual hard drive backup to a different node with different IP and host name.
  But before I start the database, there are some things I need to do.
  As change address IP address and the hostname registered with the database installed and its services.
  
  Please guide me through the steps on how to perform the activity.
  
  Concerning
  Lam...
  SOA admin.

  I think that the whole operating system will be restored in a new virtual machine... I have it... The changes will have to be done in the file listener.ora (hostname or IPADDRESS and also PORT NO in case you want another port as the existing one). Once you have made the changes that you have to bounce the listener, I mean stop and start the listener... I don't think that any other changes are needed... Make sure that the same need for entries (from the listener) to be included in the TNSNAMES file. ORA file both client-side... The tns service is used to connect to the remote database server (from the demand side or whatever source you used to connect to the database server)... I just think that the change to do... Hope its clear... Please try...

  HTH
  Kind regards

  IMRAN KHAN

• Firefox 25.0 disabled kaspersky virtual keyboard and money safe ect how do I change back to the previous version as fire fox tells you the end of the update

  Firefox 25.0 disabled kaspersky virtual keyboard and money safe ect how do I change back to the previous version as fire fox tells you towards the end of the update to the back Beach

  Hello Bretus,

  Please contact the Mozilla Support and I am sorry that this update is not compatible with the extensions you use.

  Kaspersky support forums mention that these extensions will be updated soon, so that they are compatible with FF25. In the meantime, we do not recommend that downgrade you your version of Firefox, but you can find instructions and download locations for previous versions here:

  Install an older version of Firefox

  Please let us know if this solves your problem.

  Cheers, Patrick

• Win7 Pro with virtual XP

  Hello.

  I have win7 Pro and downloaded Virtual PC and XP mode. This worked OK 1st time and then I had to recover the drive hard back to the value by default after losing the startup file. Since then, I can't XP to initialize. A text box appears after the configuration page of the password with the "the virtual machine configuration could not be created. User does not have sufficient access rights.

  A .vhd file is then created in the virtual machine folder, but I can't get the program to run. At the register anything to do with this? I uninstalled XP mode and the Vitual PC update several times and they reloaded with nothing will do.

  Hello

  Maybe your registry is confused until this topic very well, but is recommended to install the Virtual Machine Manager Configuration Analyzer 2007.
  It is a diagnostic tool that verifies the configuration settings for your computer that are important to the performance of Microsoft System Center Virtual Machine Manager.

  I also found a page of Microsoft about installing and using Windows XP Mode in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/install-and-use-Windows-XP-mode-in-Windows-7#section_3

  Perhaps, it might be useful to you.

• VISA series Loopback speed and precision with double loops and a queue

  I'm working on a test of communication between 2 PCs. I test communication series RS-422 ports by using a simple loop. PC2 wrote continuous data at 38400 baud to PC1 (LabVIEW test code is here). PC1 reads the data and writes the data to the same port as soon as possible. PC2, reads the data and compares to what should be returned. I can get the highest speed is a speed of about 37300. Because it is continuous, finally that I get an error because the buffer overruns (read and write buffers are 65KO).

  It seems that VISA writing takes a lot longer than the VISA read. I do read/write asynchronous operations. I've read a fixed amount of data (1024 bytes) and then queued data to write in another loop. My timeout is set to 0.5 seconds, which is much time opf at 38400 baud (4800 bytes/second). I played a bit with these numbers, and they are the best I can get. If I increase the data read to 2 KB, the queue members increase. If I'm going too low, I start getting the data in the input buffer overrun.

  Anyone had experience with this type of test? The code is attached. Please take a look and see if I'm doing things correctly.

  Michael

  I do not know if this explains a gap between what you expect and what you found in 0.8 seconds, but you have added another level of complication in using the digiboard.  You don't have a real serial port, but a simulated serial port which is hung at the end of a USB bus.  The digiboard software creates a virtual experiences, and so its driver software and firmware on the side of the Board of Directors of the USB bus must manage some translations to go a number of compote, transfer on the bus and decode the Compote number so that it knows which 8 physical ports that it must send the message to.  You can see delays in translation at each end so something in the USB itself Protocol where it needs group information.

  If you have another, a different brand of the serial ports, you can use, you might want to try one of these to see if you get similar or different results.  But I don't think it's a good idea to try to test the limits of a serial communication device using hardware that adds the other layers of the communication protocol and therefore complicated results.

• My machine works all the microsoft Web sites. I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites Ms.

  Could not open the MS Sites

  My machine works all the microsoft Web sites. Formatted several times and doing a new installation, I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites MS. no software or installed applications. cool, but I can not go to Sites Ms. other Web sites, I can access.  Also tried to change the memory... no luck, I've seen other sites asking to change the settings of the modem or dial the ISP, but my 2nd computer work well on the same network, took my computer to the office network and found that the same problem exists... could someone help me please...

  Hello

  Please let me know if:

  1. you are able to access other Web sites, or the question appear with only Microsoft based sites?

  All other websites work well. problem only in trying to gain access to www.microsoft.com

  2. What is the operating system that is installed?

  Windows XP Pro.

  3. are you aware of the physical RAM installed?

  1 GB

  4 and it meets the minimum requirements of the browser you are using?

  For the past 2 years my laptop works fine with the same hardware configuration. It stops working suddenly MS websites. I did not have all the hardware changes.

  Provide answers to the following questions.

  a. also mention the name of the operating system that you use.

  Windows XP Pro

  (b) is there an error message that is displayed when the site no longer works?

  trying to access the page from www.microsoft.com when rises, it is 'Impossible to view the Page.

  c. What is the browser you are using?

  Tried it on IE, mozilla and chrome.

  I tried to change the size of the memory virtual and also changed to the size of the managed system.

  formatted and installed xp pro with sp3 and I also tried formatting and install from different cd with xp and sp2. It works for 3 or 4 minute MS sites and the message immedly appears low virtual memory and it stops working MS sites.

  tried to change the physical memory.

  Tried with different browsers.

  at the top does not a little luck. :(

  Method 1: Please visit the following link to change the size of virtual memory

  Change the size of virtual memory

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  Method 2:

  See the following links

  http://support.Microsoft.com/kb/967897

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/972034