Conference softkey on the endpoints of TC

Similar Questions

• How can I manage conference layout to the driver at the Conference?

  How can I manage conference layout to the driver at the Conference?

  I am able to change the layout to the MCU only, but through condcutor is not possible.

  I have driver manages 5 vTS.

  At the moment it is not possible to change the layout of the Conference on the driver or the vTPS managed remotely, this is possible since the Touchpad of the endpoint.

• Conference TMS uses the wrong bandwidth with BBFRR

  Hi all

  I m currently faced with the following question:

  When booking a conference through TMS directly or through Outlook (with TMSXE) the bandwidth Conference when using BBFRR will be set to 1152 kbps regardless of the configured default 4096 Kbps or immersive IP broadband bandwidth in the World Conference of TMS. During a call directly to the conference expected the default bandwidth configured on the endpoint will be used. This brings me to the presumption that it has something to do with the maximum setting of IP bandwidth on each endpoint in TMS (see screenshot). You cannot change this setting because endpoint is saved to CUCM.

  TMS conference settings:

  tms_conference_setting.PNG

  

  Endpoint settings:

  tms_ip_bandwidth.PNG

  

  I have no idea where this parameter, and I hope that someone here in the field can help me fixing this problem.

  It's my current setup:

  -CUCM 10.5.2

  -TMS 14.6

  -TMSXE 4.1

  -Conductor XC3.0

  -vTPS 4.1

  -TC7.3.0 on all the endpoints (MX300G2, MX800, SX10/80)

  Thank you

  Dennis

  Looks like you hit a bug - fixed in TMS 14.6.1

  https://Tools.Cisco.com/bugsearch/bug/CSCus51732

• Error during the initial install: there is no end point for more available from the endpoint mapper.

  Summary of the issue
  Other issues of Windows Live family safety

  What version of Windows Live Family Safety do you use?
  Version 2011 (15.4.3538.513)
  Choose your operating system version:
  Windows 7

  Additional details
  While you select "Accounts of Windows I want to monitor on this computer" it shows the loading for a long time then popus symbol with:

  Windows Live Family Saftey modal window popup:

  "There is no end point for more available from the endpoint mapper."

  800706 9 error code

  Any ideas?

  I had the same problem and the error you mentioned above... Has been frustrating me. After much research I found out she was related to the basic and Windows Firewall filtering engine.

  Check if your Windows Firewall is working properly, and if you can make changes. If you get an error code when you try to change your firewall settings, which could be what it is.

  I followed this to correct the BFE and Windows Firewall it retries then parental control and he went through with NO PROBLEMS of...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Security/Windows-Firewall-cant-change-some-of-your-settings/514d78fb-39e9-47b1-B561-bc49cbdad904

  Hope this works for you as well...

• PC Hung and will now restart not [XP Pro SP3]. SYS error at startup as follows; Lsass.exe - system error. The endpoint Format is invalid.

  Original title: PC Hung and will now not restart not [XP Pro SP3]

  PC Gardner - [open Excel, open outlook, being viewed in PDF and word doc being edited].

  Restarted, then - loading SYS error window at startup as follows; lsass.exe - system error. The endpoint Format is invalid.

  Can not very well, or at the end of the message have to turn it off. Tried to reboot several times, same result.

  Just before this happened was a dialogue window appear on my PC, which indicates that Microsoft wanted to investigate problems of software they had observed on my PC that I had not sent the reports to. I approved this request and they took the reports...

  Am currently bimbling turn of safe mode with networking.

  Any smart people able to help me please?

  Thanks George

  Hello

  We will try these steps and check.

  Step 1: Try using some know last good configuration and check.

  Step 2: System Restore from safe mode or safe mode with network.

  Reference:
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222
  To start the computer in safe mode
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
  How to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/306084

• An error occurred when trying to share Share_OD. There is no end point for more available from the endpoint mapper.

  I wanted a user to add a group named "OD" the client Desktop Machine and another thing is that OU is created named OD. But an error that "an error has occurred all trying to share Share_OD. There is no end point for most the endpoint mapper. »

  Hi Laurent,.

  This request is outside the scope of this forum. I suggest you to send this request in the Microsoft TechNet forum for better support.

  https://social.technet.Microsoft.com/forums/en-us/home

• An error occurred when trying to share < folder name >. There is no end point for more available from the endpoint mapper. The shared resource was not created at this time

  Original title: sharing folder error

  How to solve this error message when I am trying to share a folder: "an error has occurred when trying to share . There is no end point for more available from the endpoint mapper. The shared resource was not created at this time. »

  Hello

  Were there any changes made on the computer before the show?

  I suggest to see the link and try to run the Troubleshooter:

  Share files with anyone

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  See also:

  File sharing essentials

  http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentials

• There is no end point for more available from the endpoint mapper

  My wife is currently running Windows 7 Home Premium.  Trying to create a share gives the following error: "year error occurred while trying to share share name."  There is no end point for most the endpoint mapper. "It's a peer-to-peer network, the other computers running Windows 7 Professional.  No service is disabled or failing.  Any ideas? »

  This could be caused by the procedure call Locator service remote does not. See http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/error-1753-there-are-no-more-endpoints-available/de6f9381-fea6-4bee-b646-b06b81f75d19 for more information.

  I hope this helps.

• TMS connects to the endpoints, but is not able to update

  Hi all

  I added our Tandberg profile on the MSDS management server endpoint and inserted the address of MSDS in the menus of the endpoint.

  In TMS I can view all the endpoints and their parameters, but when you change these settings I get the following error message: "could not update all the parameters. Details: hostAddress: [ip endpoint], description: GetDocument Failed. URL: http://[parameter] / putxml, base exception: the remote server returned an error: (417) Expectation Failed. »

  I tried several ways of connections and also did not find any solution on Cisco's Web site, so I hope you can help me. All devices, TMS and endpoints are in the same network.

  Thank you

  Ben

  First advice would be to upgrade your video network components... TMS12.1 and TC2.1.1 are quite old now! But if you want to try the solution I gave you, add the block at the end of the file, before in order to get something like this:

  ...

  ...

  ...

  Then, save the web.config file and a control box, run iisreset to restart the web server.

  And as said above, save a backup first!

• Purge of the endpoint group RegisteredDevices?

  Is it possible to purge automatically endpoints in the endpoint identity group RegisteredDevices? So if endpoint is saved by using the automatic provisioning workflow, I would that the user access authenticated auth for 24 hours, then they must be re - authenticate, so their device may not be in RegisteredDevices, after 24 hours. Thank you.

  Hi Josh,.

  An application is filed for the same under this id CSCua70707.  Currently the only way that I believe is to manually delete endpoints by checking reports of the endpoints that have been registered and also profiled.

• Obligation of posture ISE to check if the USP of the endpoint port is disabled

  Hello

  I wonder if it is possible to define the USP Port disabled in the endpoints as a requirement in the Posture of the ISE?

  Appreciate your comments.

  Mike

  If your question relates to the ability of the ISE, the disabling of the USB port on a PC, the answer is no.

  The NAC agent using, however, you can check various programs and may be able to check the status of the USB.

  You will need to create a new Condition of Posture and corrections.

  The condition that I will use in this example is a registry key.

  If the "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\UsbStor\Start" key has a value of 3, the USB is enabled.  A value of 4 is disabled.

  So set a Condition of Posture:

  Click policy > policy elements > Conditions

  

  Posture , choose the left menu:

  

  Then choose Registry Condition in the left menu.

  Click on + Add to add a new Condition of Posture:

  

  Then, you must create remediation Actions.  Click the results button at the top of the left Menu:

  

  Choose the repair Actions then reclamation that you want to use.  I chose the link cleanup.

  + Add to add a new link to the corrective measures:

  

  Requirements , choose the menu on the left, and then create a new result of remediation:

  

  Of course, you can choose different corrections if necessary for your environment.

  Please rate useful messages and mark this question as answered if, in fact, does that answer your question.  Otherwise, feel free to post additional questions.

  Charles Moreton

• Directory of TMS on the endpoints registered CUCM TC

  Since 14.4.0 TMS version, it is possible get endpoint CUCM registered directory server to point to the TMS directory instead of the CUCM directory.

  I tried to set up, but I still can't get it to work.

  On the endpoint of TC (version TC7.1.3), in Configuration > System Configuration > Server from the phonebook,

  I set the server type MSD and the URL as http://TMSserverFQDN/tms/public/external/phonebook/phonebookservice.asmx

  When I SSH to the endpoint TC I ping the TMS serverFQDN so DNS resolution on the endpoint is apparently works.

  When I open this URL in my browser, I get a page called "PhoneBookService" with GetPhonebooks links, ResolveSystem and research

  But on the preview endpoint it works everything simply. This shows just "no directory.

  How can I solve this problem?

  A few quick questions that jump to mind are:

  1. Endpoints defined in TMS?
  2. A TMS directory is published at the endpiont in MSDS?
  3. The directory TMS has a source valid and entered in it?

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate

• State of the endpoint system / meaning / resolution

  Hi guys,.

  You know all the resources to find the following State of the endpoint system messages in MSD and their meaning and/or the corresponding resolution:

  State of the endpoint system
  Unknown-
  Alive-
  Idle-
  InCall-
  No SNMP response-
  Manager not available system-
  Not registered with CUCM-
  No HTTP response-
  No HTTPS response-
   
  Thanks in advance!
   

  See table 92 'system status reports' in the TMS administration Guide, pg 133.  It is also in the TMS online help if you are looking for the same position.

• Campus 9.0 solution: what is the endpoint URL AAWS?

  People,

  Hello. I have implemented PeopleSoft Campus Solution 9.0 revision 5 for a University.

  I need to develop an application for Admission online for future student to apply for admission.

  My installations of PeopleSoft are below:

  Server machine: Oracle Linux 5.10 (64-bit)

  Client computer: Windows XP Professional (64 edition) with the Internet Explorer browser

  Architecture Internet Oracle Linux 5.10 Server:

  (1) database server: Oracle Database 11 g version 11.1.0.6.0 is

  (2) the server application: Tuxedo 11 g

  (3) web Server: Web Logic 10.3.6.0 and JDK 1.7.0_09

  (4) browser: Firefox Mozila

  (5) two Instances of huge database on the database server: 8.53 PeopleTools and Campus Solution 9.0.

  To develop the application for Admission online, I made the 4 parties with WebLogic 10.3.6 and JDK 1.7.0_09 as below:

  (1) install ADR (Application Development Runtime) 11.1.1.6.0 (64-bit)

  (2) install the RCU 11.1.1.6.0 to create the scheme of OWSM_MDS (32 bit)

  (3) create a WebLogic 'Domain_CS' domain in WebLgoic 10.3.6.0 in support of MARC 11.1.1.6.0.

  (4) install JDeveloper 11 g 11.1.1.6.0 Studio Edition including WebLogic 10.3.5.0.

  The application for Admission online is developed in JDeveloper 11 g 11.1.1.6.0 Studio Edition.

  The application for Admission online connected to AAWS (Admission Application Web Service) and through AAWS gets to database tables.

  AAWS has no Navigation in the browser. After you create the Web Application from merger, you must type in the endpoint URL for the Operations of Service. But I don't know what is the URL endpoint.

  My question is:

  What is the endpoint URL to PeopleSoft AAWS opération of obtaining for the request of Fusion ADF in JDeveloper?

  Thanks adavance.

  Also, try to check if all your service operations that you are trying to access to contains a range of "everything Local". If this is not the case, use the general tab and generate:

  

  I hope this helps. Thank you!

• Built in bridge on the endpoints of TC

  Hey,.

  I'm new on the video side of things and I try to know what TC endpoints have part built 4 in bridge.  Is there a document which can show me this?

  Thank you

  Cameron

  Hello Cameron-

  No document that I know, but I think that most all software TC based codecs such as C and SX Series have a multisite option key enabling this feature.  There might be some who are not like the SX10, not sure that others that may not.

  EDIT:

  I found a document when the I've combed the site of Cisco.

  point endpoint-product - matrix.pdf

  If you go to the section of the bandwidth, and it shows 'MultiSite', these are endpoints supported built-in conference bridges.  It is also included in the section features keys as well if it is supported.