configuration of the plugin simple text report

I am updating a project of Teststand 4.2 for 2012. The original was a text via a report updated the sequential model and ICB code. I have trying to find current best practices to achieve a similar report.

I installed the plugin to report simple text example but can find no documentation on how to configure it.

The example works fine, but the columns have no limits or the measured value and have other items that I didn't need.

Looking through the code I can see these are defined in the settings of the plugin, but I do not see where in my project to put.

I'll also have to configure the report header and the name of the file.



What exactly do you mean by "key values"? Are you referring to the Key property in the NI_SimpleTextReport_CVI.seq?

In order to get the type of comparison of a numerical limit test, for example, you can use an Expression like this post:

Locals.ComparisonType = Step.Comp

This would amount to "FROZEN".

Regarding the addition of the results of the report, the key values are a string of research compared to a result object. In this case, you can add what you want to log on to the other results of this approach. Then, you can add a new column to the report in the NI_SimpleTextReport_CVI.seq file and the value of the key:

AdditionalResults ["NameOfAdditonalResult"]

Tags: NI Software

Similar Questions

  • Replace the configuration of the plugin apps config.xml element

    One of the plugins that I use has the following config:

    One of the sections in there is:

    < target = "AndroidManifest.xml configuration file" parent = "/ manifest" > ""

    < android:name = "android.permission.RECEIVE_BOOT_COMPLETED permissions uses" / > "

    < android:name = "android.permission.WRITE_EXTERNAL_STORAGE permissions uses" / > "

    < / config-file >

    I would replace this is:

    < target = "AndroidManifest.xml configuration file" parent = "/ manifest" > ""

    < android:name = "android.permission.RECEIVE_BOOT_COMPLETED permissions uses" / > "

    < android:name = "android.permission.WRITE_EXTERNAL_STORAGE uses-permission" android: maxSdkVersion = "18" / > "

    < / config-file >

    This is because I understand that permissions are not forced to write to the external storage of your application from KitKat (4.4) (, and I want to ask this permission is turned off for users to download the application.

    I build my app using PhoneGap Build (phonegap-version is cli - 6.3.0), is there any way of this from my apps config.xml file? So far I have tried several things led to errors on malformed or duplicate < uses credentials > elements config.

    Thank you

    Here are a few possibilities:

    1. The plugin of the fork and edit as you like and build from your fork (see the documentation for the use of rest git plugins: Plugins |) PhoneGap Docs).
    2. The plugin of the fork, edit and send a request to shoot for having him up-to-date on the repo of NPM (1 or 2).
    3. Try to use the element of the BMPS config file to change the manifest: change manifest. PhoneGap Docs (do not know if it will work in this use case).
  • Where is the log file for the configuration of the plugin to a vco part?


    I have a vco plugin that has a configuration interface, basically, everything works fine, but I can't find the logs for the purposes of Web configuration. I thought that newspapers could be found in Server.log (in my case, the exact path is C:\Program Files\VMware\Infrastructure\Orchestrator\app-server\server\vmo\log\server.log) but they were not there.

    I checked a few other plugins vCO well known as the SSH plugin, but I can't find the newspapers for his configuration interface, either.

    Can someone let me know if I'm looking the wrong log file? Thanks in advance.

    To the vCO 5.1 you can check in {vCO_INSTALL_FOLDER}\configuration\jetty\logs\jetty.log

    And log4j.configuration I think is in {vCO_INSTALL_FOLDER}\configuration\jetty\resources\log4j.xml

  • Why is-export IDML wiping configuration of the plugin?


    I am reviewing with IDML exports to automate data entry in a document that will allow me to save a lot of time.

    However, when I export the .indd to .idml, the configuration of some exclusive widgets (folio slideshow,...) is lost (must be set again when you open the IDML file).

    Y at - it any reason to do it and any way to avoid this loss of data?

    Thank you

    Wouldn't surprise me if you use CS5.5 or CS5 since DPS tools were not as well integrated. But I used IDML with CS6 and haven't seen any loss of functionality DPS with IDML.


  • Sequence step results in the report in Simple text format

    I use Teststand 2012 and that you have installed the plugin from model simple text report.

    My main test sequence called a number of subsequences that contain the test steps and contain also several subsequences. A number of the subsequences is only stocks. My test result file contains all the results of measures of test as expected, but it also contains a line of output for each call of sequences - makes it difficult to see the results that count. I would only record the test steps.

    Looking at the code SimpleTextReport.dll in CVI I see it is stepping into the results and updated list in the form of each line (I changed some of the formatting). Is this the right place to filter the levels of appeal of sequence or can I stop the call sequence steps to be added to the list of results?

    You can put it in the sequential model. Just use ProcessModelPostResultListEntry with the same code. If it's in the template, you won't need it in other files. In addition, he is probably already stuff in the model. You'll have to code around it. This is how they do it on the fly.

  • Plugin 'Hidden text': how to change the mask of interactively? (Apex 4.2)


    I use the plugin 'Hidden text' large (of the Oracle Application Express Plug-Ins page) to enter formatted text.

    Now, I'm trying to put in place a way so I can change the format interactively mask, but has failed so far.

    The plugin has a custom attribute "The InputMask" and I created an element of the page 'P2_INPUTMASK '.

    In th e page is displayed as 'Hidden text' the "The InputMask" attribute is defined on & P2_INPUTMASK.

    I put in place a dynamic action (with a point of the box) that can change the value of P2_INPUTMASK, and then refresh the

    Text maskes element, but the mask of text never changed.

    Is it possible to change the value of the attribute mask interactively?

    Kind regards


    If you examine the code of the plugin, you will see that the mask is applied on the definition page loading, so your change does not affect things to run.

            apex_javascript.add_onload_code (
                p_code => 'apex.jQuery("#'||||'").mask('||
                          '{'||apex_javascript.add_attribute('placeholder', l_placeholder, true, false)||'});' );

    But you can change your dynamic action to call some javascript that would execute, something very similar to this one. Make sense?

    to start:



  • Executable error Excel VI simple text

    I have just upgraded to Windows 7 today and that you have installed Labview 2009 on the machine. Some of the VI, I must support using the vi simple text Excel. When I go to test my changes, my VI States that the Excel sub vi simple text is not executable. I am at a loss. This who could I have missed in the installation?

    Hi BadAzzS10,

    The assumption that it had to do with Excell 2010 is correct. The 2009 edition of the report generation toolkit is only compatible with the versions of MS Office 2007.

    Here is an article in the knowledge base that passes on the compatibility of the reporting tool.

    Report Generation Toolkit compatibility with Microsoft Office and LabVIEW

    If you have two options.

    -You can upgrade to LabVIEW 2010 toolkit and reporting 2010 (gen 2010 report does not work with LabVIEW 2009)


    -Install MS Office 2007 on your computer.

    It is possible to have two versions of MS Office on the same machine so that you won't lose MS 2010 by doing this, however the steps that Microsoft gives an overview on their website.

    How to run multiple versions of Office on one computer

  • CS6 Crash inDesign on placing a file on the indesign document, Crash report is attached.


    InDesign CS 6 works very well for Mac mini in MacBookPro it always crash on placing a file on the InDesign Document.

    Crash report:

    I tried:

    (1) to uninstall and reinstall CS 6

    (2) using different accounts including admin

    Troubleshooting 3) as following:

    ' a) Trash preferences (cmd-opt-shift-control keys for InDesign starting).

    Corrupt preferences (see above), or maybe the permissions on the folders that contain the preferences are such that InDesign cannot write correctly for them. (it sometimes happen).

    (b) by deleting sub folders: before you remove the sub directories/files, please make a backup (just to the trunk).  Exit design and try to delete the following files/directories (InDesign recreates them initially to the top):

    ~/Library/application support/Adobe/Adobe InDesign CS5.5

    InDesign ~/library/caches/Adobe


    InDesign ~/Library/preferences/Adobe



    ~/Library/saved application State/com.adobe.InDesign.savedState

    Note: The user library directory hides under MacPro/Lion. You can get there in the Finder by pressing Option and then go to the menu (other ways are too thin).

    Please let me know if I'm missing something.

    Thanks in advance,

    It hangs in the plugin simple catalog...

  • Report in simple text format

    Hi everyone, I am trying to use the report as simple text, to create an Excel file, I want to print a table, can someone explain to me how do?

    I looked again at your message noticed and original that you use a VI Express (Build Table2) that I do not recognize and cannot find on my Palette of function.  You have included also a photo, instead of a real VI (or a piece of a VI, a "excerpt") that I could open in LabVIEW and examine for myself.  In particular, I can't say what is in the Red wire thick Table to the Registro general - I thought it was simply a 2D channels table.

    Here's the code that's going to take a table of strings and output in a table 2D 2D in Excel.  You will notice that it is exactly as I mentioned in my previous post.

    Either way, it is a snippet.  If you have LabVIEW 2014, open a new VI, go in the block diagram, then drag the image, above, on the block where, NOR magic diagram, it will turn into LabVIEW code that you can run.  Save (and name) of the VI, then run it - it'll be Report.xlsx demo in the same folder that you used to save the VI and it will contain the contents of the table 3-for-4 above.

    Bob Schor

  • The context of invocation. Simple text sharing problem


    I would like to have an option of sharing simple text on my request. To do this, I use this code in my. QML file:

    ActionItem {
         attachedObjects: [
              Invocation {
                   id: invoke
                   query: InvokeQuery {
                        id: invokeQuery
                        mimeType: "text/plain"
                        data: "This is a text text"
         title: qsTr("Share")
         imageSource: "asset:///images/share.png"
         ActionBar.placement: ActionBarPlacement.OnBar
         onTriggered: {

    With the above text, I can see the hardcoded text appear in all applications that I can share for (bold line), however, if I use the following line to change the text dynamically to the current item of the list instead I get nothing. No text is common to all:

    data: ListItemData.description

    Do you have someone was able to share a dynamic text?

    Thank you

    Well, I managed to find a solution, but I had to use C++ instead of QML. You have here, just in case some of you have the same problem:

    void MyApp::share(QString name, QString surname, QString age)
         printf("Share invoked");
         m_pInvocation = Invocation::create(
               .data(name.toUtf8() + surname.toUtf8() + age.toUtf8()));
          QObject::connect(m_pInvocation, SIGNAL(armed()),
            this, SLOT(onArmed()));
          QObject::connect(m_pInvocation, SIGNAL(finished()),
            m_pInvocation, SLOT(deleteLater()));
    // Declare the following method as SLOT on your .hpp file
    void MyApp::onArmed() {
  • simple text to the acceptability of url?

    I want to convert the spaces containing simple text, url, so that he can bhi added to the browser

    as I am adding text to share the Tweets: TWITTER_URL + "Hello this is sample text."

    But how can I convert the string in characters acceptable browser?

     * Adapted from J2SE
    public class URLEncoder {
      public static String encode(String s, String enc)
        throws UnsupportedEncodingException {
        boolean needToChange = false;
        boolean wroteUnencodedChar = false;
        int maxBytesPerChar = 10; // rather arbitrary limit, but safe for now
          StringBuffer out = new StringBuffer(s.length());
        ByteArrayOutputStream buf = new ByteArrayOutputStream(maxBytesPerChar);
        OutputStreamWriter writer = new OutputStreamWriter(buf, enc);
        for (int i = 0; i < s.length(); i++) {
            int c = (int) s.charAt(i);
            //System.out.println("Examining character: " + c);
            if (dontNeedEncoding(c)) {
            if (c == ' ') {
                c = '+';
                needToChange = true;
            //System.out.println("Storing: " + c);
            wroteUnencodedChar = true;
            } else {
            // convert to external encoding before hex conversion
            try {
                if (wroteUnencodedChar) { // Fix for 4407610
                    writer = new OutputStreamWriter(buf, enc);
                wroteUnencodedChar = false;
                 * If this character represents the start of a Unicode
                 * surrogate pair, then pass in two characters. It's not
                 * clear what should be done if a bytes reserved in the
                 * surrogate pairs range occurs outside of a legal
                 * surrogate pair. For now, just treat it as if it were
                 * any other character.
                if (c >= 0xD800 && c <= 0xDBFF) {
                  + " is high surrogate");
                if ( (i+1) < s.length()) {
                    int d = (int) s.charAt(i+1);
                      System.out.println("\tExamining "
                      + Integer.toHexString(d));
                    if (d >= 0xDC00 && d <= 0xDFFF) {
                      + Integer.toHexString(d)
                      + " is low surrogate");
            } catch(IOException e) {
            byte[] ba = buf.toByteArray();
            for (int j = 0; j < ba.length; j++) {
                char ch = CCharacter.forDigit((ba[j] >> 4) & 0xF, 16);
                // converting to use uppercase letter as part of
                // the hex value if ch is a letter.
    //            if (Character.isLetter(ch)) {
    //            ch -= caseDiff;
    //            }
                ch = CCharacter.forDigit(ba[j] & 0xF, 16);
    //            if (Character.isLetter(ch)) {
    //            ch -= caseDiff;
    //            }
            needToChange = true;
        return (needToChange? out.toString() : s);
     static class CCharacter {
        public static char forDigit(int digit, int radix) {
          if ((digit >= radix) || (digit < 0)) {
              return '\0';
          if ((radix < Character.MIN_RADIX) || (radix > Character.MAX_RADIX)) {
              return '\0';
          if (digit < 10) {
              return (char)('0' + digit);
          return (char)('a' - 10 + digit);
      public static boolean dontNeedEncoding(int ch){
        int len = _dontNeedEncoding.length();
        boolean en = false;
        for(int i =0;i< len;i++){
          if(_dontNeedEncoding.charAt(i) == ch)
            en = true;
        return en;
      //private static final int caseDiff = ('a' - 'A');
      private static String _dontNeedEncoding = "0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ -_.*";
       * @param args  test string
      public static void main(String[] args) {
        String s = args[0];
        try {
        } catch (UnsupportedEncodingException e) {
  • Beyond a simple text on the Clipboard in the text using the key field


    You would tell me is it possible of past a simple text on the Clipboard into a field of text using button with javascript or something else?

    What is my problem?

    I have prepared a simple form using adobe acrobat dc. This form will be used in the local network. so, we can open the form of google chrome. There is a large text field in this form and we have passed the text to the Clipboard in there.

    normal, when we are using adobe acrobat to open the form, it is easy to right click and select "PASTE". but we need open the form using google chrome. in this case, no item to paste from the Clipboard.

    Please help me.


    In General, no, it's not possible.

    However, if you apply a certain change in the registry then work could . I told you how do it here: paste it from the Clipboard text box in form

  • Prepopulate the plugins used during configuration of direct AD user account?

    Hi, IOM profi.

    I pre-populate the plugins for the supply of AD account. Manual configuration is correct, and the form is pre-filled. But supply AD account for a user with the API requires no plugins. Use API functions:

    • Result OperationResult = oimService.doOperation (requestData, OIMService.Intent.DIRECT);
    • String result = requestService.submitRequest (requestData).;

    Both used only default values defined in the console of the design.

    I missed something / incorrect someware or plugins will not be used in the case of implementation of the API?

    (1) Yes, plugins in demand (catalogue based) and pre-fill adapters (console design formula)

    (2) if its manual, supported the request (catalog) pop before values will be used. Before pop form of process will not overwrite it.

    The form of processes before pop will fire for all of the value of the basic application is empty.

  • former Illustrator files will open only in the form of Simple Text Documents

    I went back to an old project Adobe Illustrator I have not opened for years but suddenly need to recovery. To my horror, I discovered that I can not open ONE of these old files HAVE. In the finder, each of these files is shown not as an .ai file, but as a "simple text document. When opening, it does is display a text code page, not my graphics HAVE. I'm currently running AI CS5 on Mac OSX 10.8.5. I would greatly appreciate all useful advice - what someone might have on this subject. Y at - it HAVE a plug-in available for update old files? No matter what?

    Thanks for your help!

    Frank Gresham

    Hi everyone who responded, or interested:

    I think I found the fix, courtesy of the Mac guru at the University where I teach. If I just add the suffix .ai on behalf of all of my files, they instantly change to read Adobe Illustrator files! Couldn't be simpler, although it raises a question. These files will open very well without needing to be done with the file at the end of each title designations. Now, suddenly, they need ".ai" after them to open properly. Well. At least, I have a solution to this problem.  Thanks for all the good advice!

    Frank G.

  • Create the plugin to write text in video

    Hello everyone. I am trying to create the plugin that writes the file name and the time code on clip in order. And I'm stuck at the beginning. How to write a text on the video? He cannot find in first SDK guide. Is this possible?

    I have CS6 first and first CS6 SDK with Microsoft Visual Studio Express 2012 on Windows 7 x 64.

    The SDK software does not offer this feature (for example, an API for the titration module).

    You will have to use another way not Adobe do like OS text to bitmap libraries (bare in mind that you will need to port to Mac and Windows) or other text to stream to the bitmap library package (which is not GPL if you plan to sell).

Maybe you are looking for