Configuration of the WSUS Client locally

Similar Questions

• A third of the WSUS Clients referring not-suspect 7.6.7601.18804 is to blame?

  Hi all

  Appreciate your thoughts on this please.

  Scenario:

  Windows Server 2008 R2 Server running WSUS 3.0 SP2.274 update installed. Many Windows 7 SP1, x 86 clients. System installed last year and has been professional and reliable. Re-index regular db and cleanup tasks. Until Jan no problems to report.

  The beginning of Jan however about 1/3 of our customers of Windows7 are now is no longer related to the WSUS server, 2/3 others remain fully operational.

  It is suspected that WUA 7.6.7601.18804 update is to blame.  Machines to seek continuously with updates, and track of WindowsUpdate.log all affected customers shows an Agent * Search Scope = {Machine} like last entry, were customers will happily sit long hours with no apparent progress.

  Content of the cleaning C:\Windows\SoftwareDistribution solves the problem, as does, oddly allowing customers to update directly from WU.  No joy after the installation of kb3112343. Of course we could automate the clearing of the C:\Windows\SoftwareDistribution folder - but if there is a more elegant solution, I'd be happy to hear it.

  Thank you all

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Configuration of the Cisco ACS Radius

  Hello

  I'm trying to set up authentication radius on cisco ACS but short question. When I set up my group of network devices in the configuration of the AAA Client as one of ray device groups, my authentications fail with authentication as a failure code"

  CS invalid password' but when I change my group of devices to "Unassigned", everything started working.

  On my AAA client, when authentication fail, I see

  Server RADIUS audit package fails:

  Please note that the AAA client is a non-cisco device.

  Any suggestions?

  It seems that you run ACS 4.x. You are facing this problem because the key is set on the excessive rides of the level (Group of devices network XYZ in your case) NDG key at the level of the AAA client.  Please make sure that you don't have different secret key on the client inside the NDG AAA and on the NDG himself.

  Not affected is working because it has no key defined in the NDG.

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/NetCfg.html#wp342738

  "Each device that is assigned to the network device group will use the shared key you enter here. The key that has been attributed to the device when it has been added to the system is ignored. If the Enter key is null, the key of the AAA client is used. »

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• IP address connection sets using the VPN Client

  Hello world. I'm using a VPN Client when I establish a VPN Tunnel with a 1600 router, and I have a question.

  Can I assign a fixed IP address in the client, instead the router send to random addresses from customer?

  What I would he do this?

  It would be in the configuration of the VPN client, or in the configuration of the router?

  If so, I'm doing this?

  Do I need another tool, or other software or hardware to do?

  any help is hope...

  Thank you...

  Hello

  I don't think that there is a simple way to do this.

  However, if you create a different groupname for the user who needs a static IP address, I think you should be good to go

  So what you need to do, create a new pool of addresses. Make the start and end ip address be the same (this is the address to which you want to assign to the VPN user)

  Configure another ipsec on the router group and bind the new pool to this group

  Ask your VPN client to connect to this group

  Hope that helps

  Jean Marc

• Install the EAS Client on 11.1.1.3?

  If you want to just install the EAS Client locally on your laptop, what files must be extracted in addition to the installer and the Essbase Client? Don't know which to extract I want to extract all the others. I want to only those that I need.

  Hello
  You have the installer, the Foundation 1 (of 4) EMP and the customers of Essbase.

  Elkaïm

• Configuration of the client VPN IPSEC IOS question

  Hello all, I just can't get my IOS Firewall to accept a client based vpn IPSEC connection. The Cisco client comes to expiration and Im never disputed a username and password. I checked my group and a pre-shared on the client and the router. I put my relevant config below. Any help would be greatly appreciated.

  version 12.4

  boot system flash: uc500-advipservicesk9 - mz.124 - 24.T.bin

  AAA new-model

  !

  !

  AAA authentication login default local

  radius of group AAA authentication login userauthen

  AAA authorization exec default local

  radius of group AAA authorization network groupauthor

  inspect the IP tcp outgoing name

  inspect the IP udp outgoing name

  inspect the name icmp outgoing IP

  crypto ISAKMP policy 3

  BA 3des

  preshared authentication

  Group 2

  !

  Configuration group customer isakmp crypto SMOVPN

  key xxxxx

  DNS 192.168.10.2

  business.local field

  pool vpnpool

  ACL 108

  Crypto isakmp VPNclient profile

  match of group identity SMOVPN

  client authentication list default

  Default ISAKMP authorization list

  client configuration address respond

  !

  !

  Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT

  Crypto-map dynamic dynmap 10

  Set transform-set RIGHT

  Define VPNclient isakmp-profile

  market arriere-route

  !

  !

  map clientmap client to authenticate crypto list userauthen

  card crypto clientmap isakmp authorization list groupauthor

  client configuration address map clientmap crypto answer

  10 ipsec-isakmp crypto map clientmap Dynamics dynmap

  interface FastEthernet0/0

  IP 11.11.11.10 255.255.255.252

  IP access-group outside_in in

  no ip redirection

  no ip unreachable

  no ip proxy-arp

  NAT outside IP

  inspect the outgoing IP outside

  IP virtual-reassembly

  automatic duplex

  automatic speed

  clientmap card crypto

  IP local pool vpnpool 192.168.109.1 192.168.109.254

  IP nat inside source list 1 interface FastEthernet0/0 overload

  outside_in extended IP access list

  permit tcp object-group Yes_SMTP host 11.11.11.10 eq smtp

  allow any host 74.143.215.138 esp

  allow any host 74.143.215.138 eq isakmp udp

  allow any host 74.143.215.138 eq non500-isakmp udp

  allow any host 74.143.215.138 ahp

  allow accord any host 74.143.215.138

  access-list 1 permit 192.168.10.0 0.0.0.255

  access-list 1 permit 10.1.1.0 0.0.0.255

  access-list 108 allow ip 192.168.109.0 0.0.0.255 192.168.10.0 0.0.0.255

  access-list 108 allow ip 192.168.109.0 0.0.0.255 10.1.1.0 0.0.0.255

  access-list 108 allow ip 192.168.109.0 0.0.0.255 10.1.10.0 0.0.0.255

  Here are a few suggestions:

  change this:

  radius of group AAA authorization network groupauthor

  for this

  AAA authorization groupauthor LAN

  (unless you use the group permission for your radius server you need local)

  Choose either on ISAKMP profiles and if you decide to go with and then get rid of these lines:

  map clientmap client to authenticate crypto list userauthen

  card crypto clientmap isakmp authorization list groupauthor

  client configuration address map clientmap crypto answer

  AND change the following items on your profile isakmp:

  Crypto isakmp VPNclient profile

  ISAKMP authorization list groupauthor

  Also if you'll use a list for user authentication, I advise you to avoid using the default list so go ahead and change it too much under the isakmp profile

  client authentication list userauthen.

  If you do not use isakmp profiles change the following:

  No crypto isakmp VPNclient profile

  Crypto-map dynamic dynmap 10

  No VPNclient set isakmp-profile

• Another problem with the configuration of Cisco VPN Client access VPN Site2site

  We have a Cisco ASA 5505 at our CORP. branch I configured the VPN Site2Site to our COLO with a Juniper SRX220h, to another site works well, but when users access the home Cisco VPN client, they cannot ping or SSH through the Site2Site.  JTACS contacted and they said it is not on their end, so I tried to contact Cisco TAC, no support.  So here I am today, after for the 3 days (including Friday of last week) of searching the Internet for more than 6 hours per day and try different examples of other users. NO LUCK. The VPN client shows the route secure 10.1.0.0

  Sorry to post this, but I'm frustrated and boss breathing down my neck to complete it.

  CORP netowrk 192.168.1.0

  IP VPN 192.168.12.0 pool

  Colo 10.1.0.0 internal ip address

  Also, here's an example of my config ASA

  : Saved

  :

  ASA Version 8.2 (1)

  !

  hostname lwchsasa

  names of

  name 10.1.0.1 colo

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.1.1 255.255.255.0

  !

  interface Vlan2

  backup interface Vlan12

  nameif outside_pri

  security-level 0

  IP 64.20.30.170 255.255.255.248

  !

  interface Vlan12

  nameif backup

  security-level 0

  IP 173.165.159.241 255.255.255.248

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  switchport access vlan 12

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  passive FTP mode

  permit same-security-traffic inter-interface

  permit same-security-traffic intra-interface

  object-group network NY

  object-network 192.168.100.0 255.255.255.0

  BSRO-3387 tcp service object-group

  port-object eq 3387

  BSRO-3388 tcp service object-group

  port-object eq 3388

  BSRO-3389 tcp service object-group

  EQ port 3389 object

  object-group service tcp OpenAtrium

  port-object eq 8100

  object-group service Proxy tcp

  port-object eq 982

  VOIP10K - 20K udp service object-group

  10000 20000 object-port Beach

  the clientvpn object-group network

  object-network 192.168.12.0 255.255.255.0

  APEX-SSL tcp service object-group

  Description of Apex Dashboard Service

  port-object eq 8586

  object-group network CHS-Colo

  object-network 10.1.0.0 255.255.255.0

  the DM_INLINE_NETWORK_1 object-group network

  object-network 192.168.1.0 255.255.255.0

  host of the object-Network 64.20.30.170

  object-group service DM_INLINE_SERVICE_1

  the purpose of the ip service

  ICMP service object

  service-object icmp traceroute

  the purpose of the service tcp - udp eq www

  the tcp eq ftp service object

  the purpose of the tcp eq ftp service - data

  the eq sqlnet tcp service object

  EQ-ssh tcp service object

  the purpose of the service udp eq www

  the eq tftp udp service object

  object-group service DM_INLINE_SERVICE_2

  the purpose of the ip service

  ICMP service object

  EQ-ssh tcp service object

  inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 clientvpn object-group

  inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group NY

  inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group CHS-Colo

  inside_nat0_outbound list of allowed ip extended access any 192.168.12.0 255.255.255.0

  outside_pri_1_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group NY

  outside_pri_access_in list extended access permit tcp any interface outside_pri eq www

  outside_pri_access_in list extended access permit tcp any outside_pri eq https interface

  outside_pri_access_in list extended access permit tcp any interface outside_pri eq 8100

  outside_pri_access_in list extended access permit tcp any outside_pri eq idle ssh interface

  outside_pri_access_in list extended access permit icmp any any echo response

  outside_pri_access_in list extended access permit icmp any any source-quench

  outside_pri_access_in list extended access allow all unreachable icmp

  outside_pri_access_in list extended access permit icmp any one time exceed

  outside_pri_access_in list extended access permit tcp any 64.20.30.168 255.255.255.248 eq 8586

  levelwingVPN_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0

  levelwingVPN_splitTunnelAcl list standard access allowed 10.1.0.0 255.255.255.0

  outside_pri_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group CHS-Colo

  backup_nat0_outbound list extended access allowed object-group DM_INLINE_NETWORK_1 192.168.12.0 ip 255.255.255.0

  outside_pri_cryptomap_1 list extended access allow DM_INLINE_SERVICE_2 of object-group 192.168.1.0 255.255.255.0 10.1.0.0 255.255.255.0

  outside_19_cryptomap to access extended list ip 192.168.12.0 allow 255.255.255.0 10.1.0.0 255.255.255.0

  inside_nat0_outbound_1 to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group CHS-Colo

  VPN-Corp-Colo extended access list permits object-group DM_INLINE_SERVICE_1 192.168.12.0 255.255.255.0 10.1.0.0 255.255.255.0

  Note to OUTSIDE-NAT0 NAT0 customer VPN remote site access-list

  OUTSIDE-NAT0 192.168.12.0 ip extended access list allow 255.255.255.0 10.1.0.0 255.255.255.0

  L2LVPN to access extended list ip 192.168.12.0 allow 255.255.255.0 10.1.0.0 255.255.255.0

  pager lines 24

  Enable logging

  debug logging in buffered memory

  exploitation forest asdm warnings

  record of the rate-limit unlimited level 4

  destination of exports flow inside 192.168.1.1 2055

  timeout-rate flow-export model 1

  Within 1500 MTU

  outside_pri MTU 1500

  backup of MTU 1500

  local pool LVCHSVPN 192.168.12.100 - 192.168.12.254 255.255.255.0 IP mask

  no failover

  ICMP unreachable rate-limit 100 burst-size 5

  ICMP allow any inside

  ICMP allow any outside_pri

  don't allow no asdm history

  ARP timeout 14400

  NAT-control

  interface of global (outside_pri) 1

  Global 1 interface (backup)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 0 inside_nat0_outbound_1 list of outdoor access

  NAT (inside) 1 0.0.0.0 0.0.0.0

  NAT (outside_pri) 0-list of access OUTSIDE-NAT0

  backup_nat0_outbound (backup) NAT 0 access list

  static TCP (inside outside_pri) interface https 192.168.1.45 https netmask 255.255.255.255 dns

  static TCP (inside outside_pri) interface 192.168.1.45 www www netmask 255.255.255.255 dns

  static TCP (inside outside_pri) interface 8586 192.168.1.45 8586 netmask 255.255.255.255 dns

  static (inside, inside) tcp interface 8100 192.168.1.45 8100 netmask 255.255.255.255 dns

  Access-group outside_pri_access_in in the outside_pri interface

  Route 0.0.0.0 outside_pri 0.0.0.0 64.20.30.169 1 track 1

  Backup route 0.0.0.0 0.0.0.0 173.165.159.246 254

  Timeout xlate 03:00

  Conn Timeout 0:00:00 half-closed 0:30:00 udp icmp from 01:00 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 01:00 uauth uauth absolute inactivity from 01:00

  timeout tcp-proxy-reassembly 0:01:00

  dynamic-access-policy-registration DfltAccessPolicy

  AAA authentication enable LOCAL console

  AAA authentication http LOCAL console

  the ssh LOCAL console AAA authentication

  http server enable 981

  http 192.168.1.0 255.255.255.0 inside

  http 0.0.0.0 0.0.0.0 outside_pri

  http 0.0.0.0 0.0.0.0 backup

  SNMP server group Authentication_Only v3 auth

  SNMP-server host inside 192.168.1.47 survey community lwmedia version 2 c

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Sysopt connection tcpmss 1200

  monitor SLA 123

  type echo protocol ipIcmpEcho 216.59.44.220 interface outside_pri

  Annex ALS life monitor 123 to always start-time now

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set esp-3des-sha1 esp-3des esp-sha-hmac

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  Crypto ipsec df - bit clear-df outside_pri

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  card crypto outside_pri_map 1 match address outside_pri_1_cryptomap

  card crypto outside_pri_map 1 set pfs

  peer set card crypto outside_pri_map 1 50.75.217.246

  card crypto outside_pri_map 1 set of transformation-ESP-AES-256-MD5

  card crypto outside_pri_map 2 match address outside_pri_cryptomap

  peer set card crypto outside_pri_map 2 216.59.44.220

  card crypto outside_pri_map 2 the value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  86400 seconds, duration of life card crypto outside_pri_map 2 set security-association

  card crypto outside_pri_map 3 match address outside_pri_cryptomap_1

  peer set card crypto outside_pri_map 3 216.59.44.220

  outside_pri_map crypto map 3 the value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_pri_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  card crypto outside_pri_map interface outside_pri

  crypto isakmp identity address

  ISAKMP crypto enable outside_pri

  crypto ISAKMP policy 5

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 10

  preshared authentication

  the Encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 30

  preshared authentication

  aes-256 encryption

  md5 hash

  Group 2

  life 86400

  crypto ISAKMP policy 50

  preshared authentication

  aes encryption

  md5 hash

  Group 2

  life 86400

  !

  track 1 rtr 123 accessibility

  Telnet timeout 5

  SSH 192.168.1.0 255.255.255.0 inside

  SSH timeout 5

  Console timeout 0

  management-access inside

  dhcpd auto_config outside_pri

  !

  dhcpd address 192.168.1.51 - 192.168.1.245 inside

  dhcpd dns 8.8.8.8 8.8.4.4 interface inside

  rental contract interface 86400 dhcpd inside

  dhcpd field LM inside interface

  dhcpd allow inside

  !

  a basic threat threat detection

  statistical threat detection port

  Statistical threat detection Protocol

  Statistics-list of access threat detection

  a statistical threat detection host number rate 2

  no statistical threat detection tcp-interception

  WebVPN

  port 980

  allow inside

  Select outside_pri

  enable SVC

  attributes of Group Policy DfltGrpPolicy

  VPN-idle-timeout no

  Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn

  internal GroupPolicy2 group strategy

  attributes of Group Policy GroupPolicy2

  Protocol-tunnel-VPN IPSec svc

  internal levelwingVPN group policy

  attributes of the strategy of group levelwingVPN

  Protocol-tunnel-VPN IPSec svc webvpn

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list levelwingVPN_splitTunnelAcl

  username password encrypted Z74.JN3DGMNlP0H2 privilege 0 aard

  aard attribute username

  VPN-group-policy levelwingVPN

  type of remote access service

  rcossentino 4UpCXRA6T2ysRRdE encrypted password username

  username rcossentino attributes

  VPN-group-policy levelwingVPN

  type of remote access service

  bcherok evwBWqKKwrlABAUp encrypted password username

  username bcherok attributes

  VPN-group-policy levelwingVPN

  type of remote access service

  rscott nIOnWcZCACUWjgaP encrypted password privilege 0 username

  rscott username attributes

  VPN-group-policy levelwingVPN

  sryan 47u/nJvfm6kprQDs password encrypted username

  sryan username attributes

  VPN-group-policy levelwingVPN

  type of nas-prompt service

  username, password cbruch a8R5NwL5Cz/LFzRm encrypted privilege 0

  username cbruch attributes

  VPN-group-policy levelwingVPN

  type of remote access service

  apellegrino yy2aM21dV/11h7fR password encrypted username

  username apellegrino attributes

  VPN-group-policy levelwingVPN

  type of remote access service

  username rtuttle encrypted password privilege 0 79ROD7fRw5C4.l5

  username rtuttle attributes

  VPN-group-policy levelwingVPN

  username privilege 15 encrypted password vJFHerTwBy8dRiyW levelwingadmin

  username password nbrothers Amjc/rm5PYhoysB5 encrypted privilege 0

  username nbrothers attributes

  VPN-group-policy levelwingVPN

  clong z.yb0Oc09oP3/mXV encrypted password username

  clong attributes username

  VPN-group-policy levelwingVPN

  type of remote access service

  username, password finance 9TxE6jWN/Di4eZ8w encrypted privilege 0

  username attributes finance

  VPN-group-policy levelwingVPN

  Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn

  type of remote access service

  IPSec-attributes tunnel-group DefaultL2LGroup

  Disable ISAKMP keepalive

  tunnel-group 50.75.217.246 type ipsec-l2l

  IPSec-attributes tunnel-group 50.75.217.246

  pre-shared-key *.

  Disable ISAKMP keepalive

  type tunnel-group levelwingVPN remote access

  tunnel-group levelwingVPN General-attributes

  address LVCHSVPN pool

  Group Policy - by default-levelwingVPN

  levelwingVPN group of tunnel ipsec-attributes

  pre-shared-key *.

  tunnel-group 216.59.44.221 type ipsec-l2l

  IPSec-attributes tunnel-group 216.59.44.221

  pre-shared-key *.

  tunnel-group 216.59.44.220 type ipsec-l2l

  IPSec-attributes tunnel-group 216.59.44.220

  pre-shared-key *.

  Disable ISAKMP keepalive

  !

  !

  !

  Policy-map global_policy

  !

  context of prompt hostname

  Cryptochecksum:ed7f4451c98151b759d24a7d4387935b

  : end

  Hello

  It seems to me that you've covered most of the things.

  You however not "said" Configuring VPN L2L that traffic between the pool of VPN and network camp should be in tunnel

  outside_pri_cryptomap to access extended list ip 192.168.12.0 allow 255.255.255.0 object-group CHS-Colo

  Although naturally the remote end must also the corresponding configurations for users of VPN clients be able to pass traffic to the site of the camp.

  -Jouni

• Need help with the configuration of the Site with crossed on Cisco ASA5510 8.2 IPSec VPN Client (1)

  Need urgent help in the configuration of the Client VPN IPSec Site with crossed on Cisco ASA5510 - 8.2 (1).

  Here is the presentation:

  

  There are two leased lines for Internet access - a route 1.1.1.1 and 2.2.2.2, the latter being the default Standard, old East for backup.

  I was able to configure the Client VPN IPSec Site

  (1) with access to the outside so that the internal network (172.16.0.0/24) behind the asa

  (2) with Split tunnel with simultaneous assess internal LAN and Internet on the outside.

  But I was not able to make the tradiotional model Hairpinng to work in this scenario.

  I followed every possible suggestions made on this subject in many topics of Discussion but still no luck. Can someone help me here please?

  Here is the race-Conf with Normal Client to Site IPSec VPN configured with no access boarding:

  LIMITATION: Cannot boot into any other image ios for unavoidable reasons, must use 8.2 (1)

  race-conf - Site VPN Customer normal work without internet access/split tunnel

  : ASA Version 8.2 (1) ! ciscoasa hostname domain cisco.campus.com enable the encrypted password xxxxxxxxxxxxxx XXXXXXXXXXXXXX encrypted passwd names of ! interface GigabitEthernet0/0 nameif outside internet1 security-level 0 IP 1.1.1.1 255.255.255.240 ! interface GigabitEthernet0/1 nameif outside internet2 security-level 0 IP address 2.2.2.2 255.255.255.224 ! interface GigabitEthernet0/2 nameif dmz interface security-level 0 IP 10.0.1.1 255.255.255.0 ! interface GigabitEthernet0/3 nameif campus-lan security-level 0 IP 172.16.0.1 255.255.0.0 ! interface Management0/0 nameif CSC-MGMT security-level 100 the IP 10.0.0.4 address 255.255.255.0 ! boot system Disk0: / asa821 - k8.bin boot system Disk0: / asa843 - k8.bin passive FTP mode DNS server-group DefaultDNS domain cisco.campus.com permit same-security-traffic inter-interface permit same-security-traffic intra-interface object-group network cmps-lan the object-group CSC - ip network object-group network www-Interior object-group network www-outside object-group service tcp-80 object-group service udp-53 object-group service https object-group service pop3 object-group service smtp object-group service tcp80 object-group service http-s object-group service pop3-110 object-group service smtp25 object-group service udp53 object-group service ssh object-group service tcp-port port udp-object-group service object-group service ftp object-group service ftp - data object-group network csc1-ip object-group service all-tcp-udp access list INTERNET1-IN extended permit ip host 1.2.2.2 2.2.2.3 access-list extended SCC-OUT permit ip host 10.0.0.5 everything list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq www list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any https eq list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq ssh list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 no matter what eq ftp list of access CAMPUS-LAN extended permitted udp 172.16.0.0 255.255.0.0 no matter what eq field list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq smtp list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq pop3 access CAMPUS-wide LAN ip allowed list a whole access-list CSC - acl note scan web and mail traffic access-list CSC - acl extended permit tcp any any eq smtp access-list CSC - acl extended permit tcp any any eq pop3 access-list CSC - acl note scan web and mail traffic access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq 993 access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq imap4 access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq 465

  access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq www

  access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq https

  access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq smtp

  access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq pop3

  access-list extended INTERNET2-IN permit ip any host 1.1.1.2

  access-list sheep extended ip 172.16.0.0 allow 255.255.0.0 172.16.0.0 255.255.0.0

  access list DNS-inspect extended permit tcp any any eq field

  access list DNS-inspect extended permit udp any any eq field

  access-list extended capin permit ip host 172.16.1.234 all

  access-list extended capin permit ip host 172.16.1.52 all

  access-list extended capin permit ip any host 172.16.1.52

  Capin list extended access permit ip host 172.16.0.82 172.16.0.61

  Capin list extended access permit ip host 172.16.0.61 172.16.0.82

  access-list extended capout permit ip host 2.2.2.2 everything

  access-list extended capout permit ip any host 2.2.2.2

  Access campus-lan_nat0_outbound extended ip 172.16.0.0 list allow 255.255.0.0 192.168.150.0 255.255.255.0

  pager lines 24

  Enable logging

  debug logging in buffered memory

  asdm of logging of information

  Internet1-outside of MTU 1500

  Internet2-outside of MTU 1500

  interface-dmz MTU 1500

  Campus-lan of MTU 1500

  MTU 1500 CSC-MGMT

  IP local pool 192.168.150.2 - 192.168.150.250 mask 255.255.255.0 vpnpool1

  IP check path reverse interface internet2-outside

  IP check path reverse interface interface-dmz

  IP check path opposite campus-lan interface

  IP check path reverse interface CSC-MGMT

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm - 621.bin

  don't allow no asdm history

  ARP timeout 14400

  interface of global (internet1-outside) 1

  interface of global (internet2-outside) 1

  NAT (campus-lan) 0-campus-lan_nat0_outbound access list

  NAT (campus-lan) 1 0.0.0.0 0.0.0.0

  NAT (CSC-MGMT) 1 10.0.0.5 255.255.255.255

  static (CSC-MGMT, internet2-outside) 2.2.2.3 10.0.0.5 netmask 255.255.255.255

  Access-group INTERNET2-IN interface internet1-outside

  group-access INTERNET1-IN interface internet2-outside

  group-access CAMPUS-LAN in campus-lan interface

  CSC-OUT access-group in SCC-MGMT interface

  Internet2-outside route 0.0.0.0 0.0.0.0 2.2.2.5 1

  Route internet1-outside 0.0.0.0 0.0.0.0 1.1.1.5 2

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  dynamic-access-policy-registration DfltAccessPolicy

  the ssh LOCAL console AAA authentication

  AAA authentication enable LOCAL console

  Enable http server

  http 10.0.0.2 255.255.255.255 CSC-MGMT

  http 10.0.0.8 255.255.255.255 CSC-MGMT

  HTTP 1.2.2.2 255.255.255.255 internet2-outside

  HTTP 1.2.2.2 255.255.255.255 internet1-outside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs set group5

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  Crypto map internet2-outside_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  crypto internet2-outside_map outside internet2 network interface card

  Crypto ca trustpoint _SmartCallHome_ServerCA

  Configure CRL

  Crypto ca certificate chain _SmartCallHome_ServerCA

  certificate ca xyzxyzxyzyxzxyzxyzxyzxxyzyxzyxzy

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as

  quit smoking

  ISAKMP crypto enable internet2-outside

  crypto ISAKMP policy 10

  preshared authentication

  aes encryption

  md5 hash

  Group 2

  life 86400

  Telnet 10.0.0.2 255.255.255.255 CSC-MGMT

  Telnet 10.0.0.8 255.255.255.255 CSC-MGMT

  Telnet timeout 5

  SSH 1.2.3.3 255.255.255.240 internet1-outside

  SSH 1.2.2.2 255.255.255.255 internet1-outside

  SSH 1.2.2.2 255.255.255.255 internet2-outside

  SSH timeout 5

  Console timeout 0

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal VPN_TG_1 group policy

  VPN_TG_1 group policy attributes

  Protocol-tunnel-VPN IPSec

  username ssochelpdesk encrypted password privilege 15 xxxxxxxxxxxxxx

  privilege of encrypted password username administrator 15 xxxxxxxxxxxxxx

  username vpnuser1 encrypted password privilege 0 xxxxxxxxxxxxxx

  username vpnuser1 attributes

  VPN-group-policy VPN_TG_1

  type tunnel-group VPN_TG_1 remote access

  attributes global-tunnel-group VPN_TG_1

  address vpnpool1 pool

  Group Policy - by default-VPN_TG_1

  IPSec-attributes tunnel-group VPN_TG_1

  pre-shared-key *.

  !

  class-map cmap-DNS

  matches the access list DNS-inspect

  CCS-class class-map

  corresponds to the CSC - acl access list

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  message-length maximum 512

  Policy-map global_policy

  CCS category

  CSC help

  cmap-DNS class

  inspect the preset_dns_map dns

  !

  global service-policy global_policy

  context of prompt hostname

  Cryptochecksum: y0y0y0y0y0y0y0y0y0y0y0y0y0y

  : end

  Adding dynamic NAT for 192.168.150.0/24 on the external interface works, or works the sysopt connection permit VPN

  Please tell what to do here, to pin all of the traffic Internet from VPN Clients.

  That is, that I need clients connected via VPN tunnel, when connected to the internet, should have their addresses IP NAT'ted against the address of outside internet2 network 2.2.2.2 interface, as it happens for the customers of Campus (172.16.0.0/16)

  I am well aware of all involved in here, so please be elaborative in your answers. Please let me know if you need more information about this configuration to respond to my request.

  Thank you & best regards

  MAXS

  
  

  Hello

  If possible, I'd like to see that a TCP connection attempt (e.g. http://www.google.com) in the ASDM logging of the VPN Client when you set up the dynamic NAT for the VPN Pool also.

  I'll try also the command "packet - trace" on the SAA, while the VPN Client is connected to the ASA.

  The command format is

  packet-tracer intput tcp

  That should tell what the SAA for this kind of package entering its "input" interface

  Still can not see something wrong with the configuration (other than the statement of "nat" missing Dynamics PAT)

  -Jouni

• Connection status: unknown, the dependency service or group could be started. __Windows could not start the DHCP Client service on Local computer. Error 5:Access is denied.

  Good evening!

  About 2 days ago my laptop not able to connect to the internet with wireless on, a brand of red x on the computer icon in the bottom right. When I hover the mouse over this icon, it shows ' connection status: unknown, the dependency service or group could be started. " I check services and found DHCP stopped running, I tried to start it manually, it shows "Windows didn't start the DHCP Client service on Local computer." Error 5:Access is denied. "I did ' sfc/scannow' and found no errors.
  I use a laptop from my friend and it works great! So there is nothing wrong with the router but my own laptop. My laptop runs windows Vista editions Home Premium with Service Pack 2.

  Need help! Please, need to connect to the internet to go to school online. Thanks in advance for any help!

  Very respectfully,.
  Jay2010

  Hello
  Failed to start the Service on the local computer's DHCP Client (applies as well to Vista)
  http://WindowsXP.MVPs.org/DHCP.htm

  ----------------------------------------

  Start - type in the search box-> find CMD top - right on - click RUN AS ADMIN

  You can copy and paste this command, and then press enter

  netsh winsock reset catalog

  ======================

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ----------------------------------------

  Try setting all Windows services on their default values.

  Start - type in the search box-> find Services at top - right click - RUN AS ADMIN

  Vista default services
  http://www.blackviper.com/WinVista/servicecfg.htm

  ---------------------------------------

  Actually try updating your driver: (use a wire or download on another computer and transfer via)
  removable media)

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------

  You can get more help in these forums.
  http://social.technet.Microsoft.com/forums/en/category/windowsvistaitpro

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Need a guide to configure the VPN Client

  Hello...

  I vpn in my 506th pix and I have ver.4.0.1 software vpn client installed on the other pc (on the outside). In the firewall, there are two types of vpn; VPN site to site and remote vpn access. We use vpn for remote access to allow the vpn client to access our server right?

  This is all new to me and could you give an example how to configure vpn inside my firewall in CLI or PDM command and how to configure the software vpn client.

  Please help us beginners cisco

  Tonny

  Tony,

  Try chanigng a cisco and see if it solves... but otherwise, since you changed the PIX outside IP now, you will be able to make VPN connections to the new public IP address now, if it is routed on the internet.

  can you please try to connect now and let us know what is happening?

• Local storage shows as inactive in the web client

  Hello

  So I have a strange problem. On two of my guests, local storage shows as inactive in vCenter. I can access it without problem and there seems to be problems, but it is a bit concerning to see the alert whenever I am connected.

  

  However, when I checked in the thick client this error is not there. It is only in the web client for a reason any. I tried to restart the management agents, update storage adapters, and a new analysis of storage, but it has not changed.

  No idea what can be the cause and if it's something to worry about?

  Thank you!

  Please reboot the host and see again in the Web Client.

  BTW, what version of vSpehre for your environment?

• Create a local user with the vSphere Client

  Hello

  I want to create a new user with the permission of readonly. In the vmware documation salon, they say I have to go to the tab local users and groups, but there is no tab with that name.

  And sorry for my English I'm not a native speaker.

  Hi and welcome to communities,

  This tab is visible only when you connect to the ESXi directly with the vSphere Client. You won't see when you connect to a vCenter server.

• System Analyzer of the customer in the clouds control 12 c does not show the successful configuration of the client

  Hello

  I'm testing this feature, I found these days in our new 12.1.0.2 deployment of oracle cloud control. When I navigate to Enterprise-> Configuration-> Client system Analyzer. I click on the link Https://servername:port / em/public/ecm/AAFC/AAC of the link example. It shows that a collection of configuration was collected successfully and the data sent to the server. Before continue explaining just to elaborate on we had which was originally confined file exceeded that I fixed it using the oracle support article 843903.1.  I then try to navigate Enterprise-> Configuration-> customer configurations. It shows that nothing has been collected. Is that what I'm doing wrong is there steps I need to do other than the Start button on the page 'Client system Analyzer' earlier that documents are not really clear about this.

  Thanks in advance for your help.

  
  Kind regards

  Fernemont

  It seems that it was a bug. If someone is also having the same problem that you will need to download the Patch issue: 17743138

  Kind regards

  Fernemont

• Profile of user configuration / synchronize the profile between client and Server version

  We customize our domain (Windows 2008 R2). The domain user should have an opportunity to work as a local user and domain user. Profiles should be synchronized every time if the user is in the intranet. We have the following goals

  1 setting up a user profile to domain (Server version) for Windows XP, Vista and Windows 7

  2 coordinate the profiles of local with domain profiles

  Thank you very much for your support.

  HELMAT Amin

  You won't find many people who know the servers in a Windows Vista newsgroup. Best to find one of the newsgroups server TechNet or MSDN and after this kind of issue areas here.

  'helmat' wrote in the new message: * e-mail address is removed from the privacy... *

  We customize our domain (Windows 2008 R2). The domain user should have an opportunity to work as a local user and domain user. Profiles should be synchronized every time if the user is in the intranet. We have the following goals

  1 setting up a user profile to domain (Server version) for Windows XP, Vista and Windows 7

  2 coordinate the profiles of local with domain profiles
  Thank you very much for your support.

  HELMAT Amin

• Need help with native VPN client for Mac to the Configuration of the VPN router RV082

  Guys,

  I am trying to set up router RV082 VPN Client with native Mac for my remote access. However, no matter what I did, I'm not able to make works. Can any give me an example of how to set my router RV082 and Mac Book Pro (Mountain Lion)?

  Thank you

  Hi Jixian, the native client MAC does not work. The IPSEC VPN client is the same as the 5.x Cisco VPN client is not supported on this device.

  Your alternatives are to use PPTP or a 3rd party IPsec client such as ipsecuritas.

  -Tom
  Please evaluate the useful messages