Configuration variable not found during execution by a task scheduler of the SSIS package. Works fine locally from the command window.

Similar Questions

• I use Adobe Acrobat Pro XI (11.0.08) during execution of "save under" process "Reduced the size of the pdf file" Adobe for awhile then stops completely and needs to close. All started to do that today.

  I use Adobe Acrobat Pro XI (11.0.08) during execution of "save under" process "Reduced the size of the pdf file" Adobe for awhile then stops completely and needs to close. All started to do that today.

  As I had not heard of you, I tried to 'cut' of this folder and pasted into a folder, I called "temptemp" in the same root fodler lacation, (not in the original file). Run the program and it gave me the same error and closed again.  Any help now?

• I downloaded Adobe photoshop cs 5, after download, it is not installing in my computer of OS - Windows 7 and the message is to give "Installer failed to initialize. File not found. Download Adobe support Advisor to check the problem

  I downloaded Adobe photoshop cs 5, for trial, after download, it is not installing in my computer of OS - Windows 7 and the message is to give "Installer failed to initialize. File not found. Download Adobe support Advisor to check the problem

  just uninstall cs5, clean a cleaning use of the CC tool to resolve installation problems. CC, CS3 - CS6 then install.

  Make sure your file is downloaded to your hard drive sizes are expected file sizes.  If you don't know how, ask someone to do it for you.

• I had a windows 2008 r2 domain 1 DC everything worked fine, I added a second windows of DC 2012 now Kerberos does not work for RDP

  I had a windows 2008 r2 domain 1 DC everything worked fine, I added a second windows of DC 2012 now Kerberos does not work for the RDP, Hyper V replication is nothing below a couple of samples of what I see I do not know where to begin finding the problem

  + System

  -Supplier

  [Name]  Microsoft-Windows-Security-Kerberos
  [Guid]  {98E6CFCB-EE0A-41E0-A57B-622D4E1B30B1}
  [EventSourceName]  Kerberos
   
  -EventID 3

  [Qualification] 32768
   
  Version 0
   
  Level 2
   
  Task 0
   
  Opcode 0
   
  Keywords 0 x 80000000000000
   
  -TimeCreated

  [SystemTime] 2016-01 - 03 T 01: 34:27.000000000Z
   
  2991 EventRecordID
   
  Correlation
   
  -Execution

  [ProcessID] 0
  [ThreadID] 0
   
  Channel system
   
  Computer DC02.xxxxxxonline.com
   
  Security

  -EventData

  LogonSession xxxxxxONLINE.COM\xxxxxx
  ClientTime
  1:34:27.0000 03/01/2016 Z ServerTime
  Error code 0 x 19
  ErrorMessage KDC_ERR_PREAUTH_REQUIRED
  ExtendedError
  ClientRealm
  CustomerName
  ServerRealm xxxxxxONLINE.COM
  ServerName krbtgt/xxxxxxONLINE.COM
  TargetName krbtgt / * address email is removed from the privacy *
  ErrorText
  E file
  Line d3f
  30773054A103020113A24D044B3049301FA003020112A1181B16524F434B45594F4E4C494E452E434F4D726F636B65793005A003020117301FA003020103A1181B16524F434B45594F4E4C494E452E434F4D726F636B65793009A103020102A20204003009A103020110A20204003009A10302010FA2020400

  --------------------------------------------------------------------------------

  Binary data:

  In the words

  0000: 54307730 010203A 1 044DA213 3049304B
  0008: 0203A01F 18A 11201 4F52161B 59454B 43
  0010: 494C4E4F 432E454E 6F724D4F 79656B 63
  0018: 03A 00530 30170102 0203A01F 18A 10301
  0020: 4F52161B 59454B 43 494C4E4F 432E454E
  0028: 6F724D4F 79656B 63 03 HAS 10930 A2020102
  0030: 30000402 0203 HAS 109 02A 21001 09300004
  0038: 010203 A 1 0402A20F 00

  In bytes

  0000: 30 77 30 54 A1 03 02 01 0w0T¡...
  0008: 13 4 04 4 B 30 49 30 A2. ¢ M.K0I0
  0010: A0 03 02 01 12 A1 18 1F. ....¡.
  0018: 1 16 52 4F 43 4 B 45 59 B... XXXXXX
  0020: 4F 4 49 4F 4E 45 2ND 43 ONLINE. C
  0028: 4 72 6F 63 6 b 65 79 OMxxxxxx 4F
  0030:30 05 A0 03 02 01 17 30 0. .... 0
  0038: A0 03 02 01 03 A1 18 1F. ....¡.
  0040: 1 16 52 4F 43 4 B 45 59 B... XXXXXX
  0048: 4F 4 49 4F 4E 45 2ND 43 ONLINE. C
  0050: 4 72 6F 63 6 b 65 79 OMxxxxxx 4F
  0058:30 09 03 02 01 02 A2 A1 0... ¡¢
  0060: 02 04 09 03 02 A1 00 30... 0.¡..
  0068:01 A2 02 04 00 30 09 10... ¢... 0.
  0070: A1 03 02 01 0F A2 02 04... ¢...
  0078: 00                        .

  + System

  -Supplier

  [Name]  Microsoft-Windows-Security-Kerberos
  [Guid]  {98E6CFCB-EE0A-41E0-A57B-622D4E1B30B1}
  [EventSourceName]  Kerberos
   
  -EventID 3

  [Qualification] 32768
   
  Version 0
   
  Level 2
   
  Task 0
   
  Opcode 0
   
  Keywords 0 x 80000000000000
   
  -TimeCreated

  [SystemTime] 2016-01 - 02 T 16: 52:38.000000000Z
   
  2943 EventRecordID
   
  Correlation
   
  -Execution

  [ProcessID] 0
  [ThreadID] 0
   
  Channel system
   
  Computer DC02.xxxxxxonline.com
   
  Security

  -EventData

  LogonSession xxxxxxONLINE.COM\xxxxxx
  ClientTime
  16:52:38.0000 02/01/2016 Z ServerTime

  
  Error code 0 x 19
  ErrorMessage KDC_ERR_PREAUTH_REQUIRED
  ExtendedError
  ClientRealm
  CustomerName
  ServerRealm xxxxxxONLINE.COM
  ServerName krbtgt/xxxxxxONLINE.COM
  TargetName krbtgt / * address email is removed from the privacy *
  ErrorText
  E file
  Line d3f
  30773054A103020113A24D044B3049301FA003020112A1181B16524F434B45594F4E4C494E452E434F4D726F636B65793005A003020117301FA003020103A1181B16524F434B45594F4E4C494E452E434F4D726F636B65793009A103020102A20204003009A103020110A20204003009A10302010FA2020400

  --------------------------------------------------------------------------------

  Binary data:

  In the words

  0000: 54307730 010203A 1 044DA213 3049304B
  0008: 0203A01F 18A 11201 4F52161B 59454B 43
  0010: 494C4E4F 432E454E 6F724D4F 79656B 63
  0018: 03A 00530 30170102 0203A01F 18A 10301
  0020: 4F52161B 59454B 43 494C4E4F 432E454E
  0028: 6F724D4F 79656B 63 03 HAS 10930 A2020102
  0030: 30000402 0203 HAS 109 02A 21001 09300004
  0038: 010203 A 1 0402A20F 00

  In bytes

  0000: 30 77 30 54 A1 03 02 01 0w0T¡...
  0008: 13 4 04 4 B 30 49 30 A2. ¢ M.K0I0
  0010: A0 03 02 01 12 A1 18 1F. ....¡.
  0018: 1 16 52 4F 43 4 B 45 59 B... XXXXXX
  0020: 4F 4 49 4F 4E 45 2ND 43 ONLINE. C
  0028: 4 72 6F 63 6 b 65 79 OMxxxxxx 4F
  0030:30 05 A0 03 02 01 17 30 0. .... 0
  0038: A0 03 02 01 03 A1 18 1F. ....¡.
  0040: 1 16 52 4F 43 4 B 45 59 B... XXXXXX
  0048: 4F 4 49 4F 4E 45 2ND 43 ONLINE. C
  0050: 4 72 6F 63 6 b 65 79 OMxxxxxx 4F
  0058:30 09 03 02 01 02 A2 A1 0... ¡¢
  0060: 02 04 09 03 02 A1 00 30... 0.¡..
  0068:01 A2 02 04 00 30 09 10... ¢... 0.
  0070: A1 03 02 01 0F A2 02 04... ¢...
  0078: 00                        .

  This issue is beyond the scope of this site which is for the consumer to related issues.

  To ensure that you get a proper answer, ask either on the Technet site, if it is a type of Pro problem, or MSDN if it's related to the developer

  http://social.technet.Microsoft.com/forums/en-us/homes/en-us/home

  http://social.msdn.Microsoft.com/Forum

• Windows 7 network drive displayed in the command window, but not in Explorer!

  Hi all

  I have several problems with mapping network drives between W7 x 64 business computers. All computers entirely patches, are part of the same network and home group (which is not part of a domain) and I'm looking in the file share on the shares created on the primary computer.

  Share 'Backup' (for example) on the primary computer has all necessary for the 'Me' user access rights, which exists on both computers and is active. When I try to map a drive to the action using the Explorer, I get the error "the folder you specified is currently mapped using a different user name and password... "even if nothing is currently connected to this computer and the command" net use * / d "returns no entries.

  Using an admin command window, I can not able to map any drive sharing using "net use x: \\mainPC\Backup/user: me mypassword" command. The disc is available in this order, but DO NOT SHOW IN EXPLORER window! (Sorry, I am really angry now). Dir command shows all the files, I can create folders and copy things under the command window, but the command 'Start x:' returns the error "x: refers to a location that is not available...". "(pull the hair!)

  Your help with this problem is greatly appreciated.

  Ray!

  What you observe is by design. Mapped network resources are visible only in the session that created them, but not in other sessions. What makes them universally visible would be a breach of security.

• I get say error message "an error has caused Photoshop to stop working correctly. Windows will close the program and notify you if a solution is not available "." I got no notification. My old Photoshop CS5 works fine, but as I'm paying for CC2014

  I get say error message "an error has caused Photoshop to stop working correctly. Windows will close the program and notify you if a solution is not available "." I got no notification. My old Photoshop CS5 works fine, but as I pay for CC2014 I would use it. I tried to rename the "sniffer" to "snifferold" as bobmiller4002 has suggested, but the problem is not resolved. Lightroom works fine.

  Update your driver from the website of the manufacturer of the GPU video card to pick up the bug fixes that you are missing...

• Portege M400 - no HARD drive not found during recovery "no found TMBR.

  Hello

  I am trying to reinstall my Toshiba Portege M400 146 provided with the original hard drive, but the recovery program will not accept that there is a record of hard work in the computer.

  I know the drive works as I have used on other computers to experiment with Windows 7, etc and in the computer Toshiba windows 7 (always on the HDD) will also begin to start, but planting them.

  The error message is that there is no record of hard work and the following text are in 2 command windows both with the title:

  X:\i386\systen32\cmd.exe

  * Error screen 1: *.

  Check the type of partition MBR
  Not FOUND: Partition ID 4 is 0x00 not 0 x 88
  Seeking the TMBR
  No found TMBR!
  Fact.

  Microsoft DiskPart version 5.2.3790.1830
  Copyright (C) 1999-2001 Microsoft Corporation.
  On computer: MININT-JUC

  Disk 0 is now the selected disk.

  Services of disk management cannot complete the operation.
  Specified drive does not exist.
  ERROR: E:\04386R01 Reco-unpacking. TPA has failed!
  Press a key to continue...

  Error screen 2:

  Manage the RAID configuration.
  # Mode GET1 F
  # Flags 0 x 00 0x00 0x00
  # Flag1 is 0x00 no 'F '!
  Get the current status of RAID...
  RAID level = compatible RAID
  Status: Optimal
  Get the number of readers...
  X:\I386\System32 > _

  I also tried with other drives and the same problem persists.

  Anyone seen the same problem and found a solution?

  Berst cordially

  Hello

  Eventually the partitions that appear on the HARD disk is corrupted.
  I couldn't install the OS on my laptop because the partitions have been confues up, I don t know why, but I couldn't format the HARD drive using the recovery disk.

  Finally, I took the Windows XP disc and formatted the whole HARD drive and deleted all partitions on the HARD drive. Then I installed Windows XP by using the Microsoft disk.
  After that, I made the recovery disc and installed the operating system using the Toshiba disc.
  Then, it was possible to reinstall the OS.

  Notes; The M400 seems supported RAID and therefore, you need to install the RAID driver first!

• taskdef class not found during the generation of code from wsdl using Ant

  I'm getting a class not found error during the generation of the java code from the wsdl file.
  
  *******************
  CU dmwls (338) $ ant generate wsdl
  BuildFile: build.xml
  
  ++ BUILD FAILED ++
  ++ file:/ffdt01/resmgt/kul/build.xml:14: taskdef class weblogic.wsee.tools.anttasks.WsdlcTask can not be found ++
  
  Total time: 1 second
  CU dmwls (339) $ cat - n build.xml
  < default project 'all' = > 1
  2 < name = "bea.home property" value="/opt/bea/wls/8.1sp4" / > "
  "3 < name ="jdk.home property"value =" ${bea.home} / jdk142_05 "/ >
  "4 < name ="weblogic.home property"value =" ${bea.home} / weblogic81 "/ >
  5
  6 < path id = "weblogic.classpath" >
  "7 < fileset dir="${weblogic.home}/server/lib ">
  8 < include name = "*.jar" / >
  9 < / fileset >
  10 < / path >
  11
  12 < taskdef name = "wsdlc.
  13 classname = "weblogic.wsee.tools.anttasks.WsdlcTask"
  14 classpathref = "weblogic.classpath" / > "
  15
  16 < name target = "generate-to-wsdl" >
  17 < wsdlc
  18 srcWsdl="/ffdt01/resmgt/kul/ksr.wsdl.
  19 destJwsDir = ' / ffdt01/resmgt/kul.
  20 destImplDir = ' / ffdt01/resmgt/kul.
  21 classpathref = "${weblogic.classpath}" "
  22 classpath = "${weblogic.classpath}" "
  23 packageName = "examples.webservices.wsdlc" / > "
  24 < / target >
  25 < / project >
  *******************
  
  I checked this class in the use of weblogic.jar file unzip command but there is no class "WsdlcTask".
  
  Unzip weblogic.jar-l | grep WsdlcTask - does not result
  
  I am looking WsdlcTask class in all the jars under BEA_HOME directory using below command but not found in class WsdlcTask.
  
  CD $BEA_HOME
  To find. -*.jar name-exec unzip {}-l------. grep WsdlcTask - also returned no results
  
  
  Some required classes does not appear in my weblogic.jar/jar file or there is something wrong with my build.xml file?
  
  Help, please.
  
  Kuldeep

  Hi Kuldeep,

  WSDLC you use in WLS8.1 ehich is not correct... "weblogic.wsee.tools.anttasks.WsdlcTask" the above taskDef is present WLS9.x leave.

  Please use the next task for WLS8.1 (http://download-llnw.oracle.com/docs/cd/E11035_01/wls100/webserv_ref/anttasks.html#wp1075710)

  <>
  WSDL = "WSDLs/MyService.wsdl"
  destDir = "myService/implementation.
  packageName="example.ws2j.service"/ >

  Thank you
  Jay Sensharma
  http://jaysensharma.WordPress.com/webservices/ (WebLogic wonders are here)

  Published by: Jay SenSharma on February 16, 2010 13:30

• Error message 'setenv.ini' not found during installation

  I want to install the XP Pro version of the cd but I get the error message "setenv.ini" not found

  Hello

  This occurs if you install Windows from the Microsoft or Toshiba Recovery disk?
  In addition, it would be interesting to know what laptop you have.

  The disc is maybe scratchy check it!

• HP pavilion g4-1304au notebookpc - HARD drive is not found during the installation of Windows XP

  name of the product - hp pavilion g4-1304au notebookpc

  product no - #ACJ D4X79PC

  processor - AMD A4 - 3330 X

  During the installation of windows XP, it shows an error that the "mass storage is not recognized.

  Please give me Slipstreamer pilot for the specification above.

  You can follow the instructions in the following document, which allows you to install Windows XP on your laptop.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=130&prodSeriesId=5046252&prodTypeId=321957&ObjectID=c01092639

  Also make sure that you install the last Windows XP SP3 for laptops and get into the BIOS and change a SATA AHCI to IDE / legacy mode.

  Also, if there is a parameter called "Secure Boot", disable it.

  I hope this helps.

• Printer is not found during wireless install HP Laserjet P1102w Mac OS X10.6.8

  HP Laserjet P1102w worked very well connected my device to the airport.  I uninstalled the printer software by mistake.  Downloaded the latest driver to reinstall.  "Resettlement"successfully"complete but the printer is not found on the ' printer & Fax" system preferences or if I invite with "Add printer".  The HP Firmware Upgrade utility also cannot find my printer via the network connection, gives me the error "device is inaccessible."  The network address entered is not valid or your device is not supported or is not available. If please correct the problem and try again. "There is no problem with my network or surf the internet.

  All advice is appreciated.

  Thank you for this answer step by step in detail.  It was extremely useful.  Printer is connected to the airport and all the computers on the network can print to it.   Hurrah.

• Esxi5.5 scripted installation fails on "tools.t00: file not found" during the sequence of tftp

  Hello

  I realize this has arisen before but other that the proposed upgrade to v4 pxelinux.0 solution (which I did), I can't solve my current problems of pxeboot default due to #.

  Tools.T00: file not found on a network of esxi 5.5 installation

  That's what I see in the tftp log:

  Dec 09 17:07 ptc34551.hursley.ibm.com as [14604.1840335168]: /esxi55/tools.t00 to 9.20.170.34:49234 serving

  Dec 09 17:07 ptc34551.hursley.ibm.com as [14604.1840335168]: width option-> 167559911

  Dec 09 17:07 ptc34551.hursley.ibm.com as [14604.1840335168]: blksize option-> 1408

  Dec 09 17:07 ptc34551.hursley.ibm.com as [14604.1840335168]: file asked to increase much, BLKSIZE

  which according to VMware KB: ESXi 5.x fails to install when using PXELINUX is due to running a 32-bit version of pxelinux.0

  rpm of syslinux containing pexboot.0 is syslinux-tftpboot - 4.02 - 7.2.el5

  The other suggestion to avoid tftp to build the vmware host must use nfs in the boot.cfg settings. https://communities.VMware.com/message/2163034#2163034

  It was a post that not solved and the settings, I did to get the system to build via nfs instead of tftp failed

  If anyone has any ideas it would be great

  Concerning

  Paul

  Hi Paul
  Tools.T00 contains the iso files that you will need to install vmware tools.

  An installation without tools.t00 seems to be fully functional - but I'm not 100% sure on this subject.
  My suggestion has been designed for troubleshooting - so if possible to continue your search for the real problem.

  Your tftp can be used not the largest files x MBs - either you hit a timeout - because the package does not arrive fast enough.

  Ulli
  (here I made a testsetup without tools - if I find other missing features I'll let you know...)

• View Composer 4 Build 21930 - database is not found during installation on W2k3 32bits

  Hello!

  I'm trying VMware View.

  I try to install View Composer, but I always get error 'database was not found"when installing.

  vCenter is installed under Windows 2003 Standard SP2 32-bit and use MSSQL 2005 Express (installed by vCenter).

  The database was created in MSSQL, also created by the user.

  ODBC was created, and say that everything is ok.

  I search on google. Everything that I found speaks ODBC to a 64 bit OS.

  Thank you for your help.

  Looking at your screenshot, it seems that you are using a UserDSN not a SystemDSN.  View Composer requires a system DSN.  See if that helps.

• Adobe Customization Wizard XI: setup.ini is not found (during the recording of the MSI)

  I downloaded the wizard XI of customization of Adobe and the Adobe Reader XI .msi file. I'm looking for only three options to customize this app. When I try to save the .msi file, I get an error "setup.ini file was not found.

  I placed the .msi file in a folder on the desktop. In addition, I tried using 7 - Zip to extract the .msi file in order to find the setup.ini file.

  Where is this file which is located? What is the solution?

  Any help is very appreciated.

  Simply install Adobe Reader on a computer.  Then, you will get the flat files in a folder with the Setup.ini file.  It will be something like that, depending on your operating system:

  Windows 7 64-bit example location

  C:\ProgramData\Adobe\Setup\{AC76BA86-7AD7-1033-7B44-AB0000000001}\

• OATS Database Configuration tool not found

  Hey guys,.
  
  I wanted to just start the 'OATS Database Configuration tool', but I can't find it in "start > all programs > Oracle Application Testing Suite.
  I did a full install of OATS Version 9.31.0036.
  
  Someone at - it an idea?
  
  Best regards
  Dewi

  I'll try to check first if the dbConfiguration jar file exists on the server, and second, to get the absolute path to the pot in the command line.

  C:\Programme\Oracle\OracleApplicationTestingSuite\jdk\jre\bin\javaw.exe-Djava.library.path=C:\Programme\Oracle\OracleApplicationTestingSuite\oats\lib - cp C:\Programme\Oracle\OracleApplicationTestingSuite\wls\wlserver\server\lib\weblogic.jar; C:\Programme\Oracle\OracleApplicationTestingSuite\wls\wlserver\common\lib\pdev.jar;wlfullclient.jar-jar C:\Programme\Oracle\OracleApplicationTestingSuite\\lib\DBConfiguration.jar

  JB