where the fav icons are stored in the Firefox profile? You can drag and drop on the bookmarks?

Similar Questions

• I am trying to copy a file to another folder, I have the file open, how do the other folder along the side so I can drag and drop

  I have a file on a cd - rw that I try to copy to a different folder, I open the file, but how can I get the new folder the long side so I can drag and drop

  Hi tommckeith,

  ·         What version of the operating system is installed on the computer?

  ·         You try to move the file on the CD to the computer or inside the CD?

  If you want to move the file on the CD for computer, follow the steps in the article.

  Move and copy files using drag and drop

  http://Windows.Microsoft.com/en-us/Windows7/move-and-copy-files-using-drag-and-drop

  Copy and paste a file

  http://Windows.Microsoft.com/en-us/Windows7/copy-and-paste-a-file

  If you try to move the file to the CD, then it is not possible to make changes on the data stored in the CD. You must copy the data to the computer, and then make the necessary changes. You can also make the changes before saving the data to a CD.

• How can I make use of TC partitions and make sure that the file analysis is on the right partition?  I do not see the partitions that I have done in the Finder, but I can drag and drop the files in the folder 'Data' unique under Finder/Shared/TC.

  MacBook Air, OSX 10.10.3, 128 GB; 2 TB Time Capsule ME177LL/A.

  Final objective: use Time Capsule as a Time Machine for my MacBook Air and as a storage solution for large files that I don't want permanently on my MacBook Air.

  So far, I've implemented the TC and set up Time Machine on the TC.  I was able to create 2 partitions on the TC using disk utility then that TM was a backup and the disk was recognizable in disk utility.

  Under Finder/shared, I see the TimeCapsule 'airport', and when I click on it it is a file called "Data".  I was expecting to see my two partitions here.  Under 'Features' is a ' Zissou31 MacBook Air (3)"sparsebundle file and I can also create folders here and drag and drop files on the TC here.  I can see the partitions in disk utility, but how do I see/use the partitions I created in the Finder?

  I fear that this may not be set up correctly and I'm either losing on an entire partition I created or these files dragged/dropped may be at risk of overwriting of TimeMachine.  How can I make sure that the file analysis is on the appropriate partition?

  I disabled TimeMachine and go back to see if I could 'point' to one of the partitions, but the "Data" folder is the only thing that TimeMachine seen.  How do I point time Machine for one of the partitions?

  Thank you!

  In addition, in disk utility, I can see one of the partitions TC is related to the time Machine, indicated by the icon Time Machine green bottom left, but two partitions seem to fall under "Zissou31 of the MacBook Air (3) .sparsebundle.

• How can I configure the subfolders in Firefox my WEBMAIL so that all are visible and I can drag and drop emails in my Inbox? (this is possible with Explorer)

  I have a Windows 7 operating system on my PC.

  Sorry for the late reply, but what kind of webmail do you use? What is a popular site like Gmail/Yahoo/Hotmail or a corporate site (for example, the Outlook Web app) or something else?

  If you have already solved this problem, please describe what you were referring to others.

• When we organize our emails/landing pages into folders, is there the capacity drag-and - drop?

  Sometimes it does not work always when I record my work and I want to keep my tidy Eloqua platform! I have

  Hi Nathalie,.

  You can drag and drop in the selector (so for example, under the E-mail section, click on "Open an existing email" and opens the selector). If you are looking for in the selector, you will not be able to drag and drop the results of research, but if you want and instead simply navigate through the selector by clicking, you can drag and drop assets into a folder.

  If you want to drag to 'up' in the hierarchy of folders, you can drag the item to the track "Breadcrumb" above the list of files (so if you are in a folder called work in progress, the "breadcrumb" will look like Test-> file Some-> other folder-> current folder), like this:

  

• How drag and drop a picture into a shape of the object?

  On my old Lion system that I used to be able to drag a picture from iphoto in the shape of the object open in Pages.  I can't be able to do more.  The system changed?  I tried to use Inspector (under help), but it won't let me access the file of the photo on the right.

  You can drag and drop a picture in a form in v4.3 Pages ' 09, but this can be done in any version of v5 Pages. Quite different applications, as well as more recent Pages has lost about 100 features that were in its antecedent.

  Check if you have Pages ' 09 v4.3 in your Applications: iWork ' 09 file. If so, use it.

  Pages v5 requires that you select a shape, and then on the Image tab in the right panel, you choose Image, scale to fill fill, and then select your image for the background. You cannot select this image from the inside, but you can add text to the form that will appear on your image.

• Drag and drop files to the icon of the EXE

  I was wondering if there is a way for the user to drag and drop files on the .exe icon and it would launch the program to do something with these files automatically?

  For example: Some PDF convertor programs allow you to drag and drop documents, images, etc. directly on your desktop PDF Converter icon and it will automatically convert to PDF format, without the user even having to open the program.

  This same kind of functionality is possible with a file EXE of Labview?

  If you look at the Arguments of the command line of the Application class property, the first element must match the name of the EXE, the following elements will be the path or paths that were dropped on the icon of the EXE.

• Having problem adding to drag-and - drop operation to move the furniture on a floor plan

  I have the following code. I need to create floor plans where users can drag and drop the furniture on the floor plan.  I have three elements that work but when I convert all of the additional items to a symbol and select movie clip and then add several lines to the code, none work... How the code can determine that my clip I named 'couch' goes to clip 4.  Thanks if you can help, Frankie Foster

  Here is my code:

  var numObjects:uint = 3 / / assign the total number of movieclips that will be dragged

  for (var i: uint = 1; i < = numObjects; i ++) {}

  This ["movieClip_" + String (i)] .addEventListener (MouseEvent.MOUSE_DOWN, clickToDrag);
  This ["movieClip_" + String (i)] .addEventListener (MouseEvent.MOUSE_UP, releaseToDrop);

  }

  var selectedMC:MovieClip;

  movieClip_1.addEventListener (MouseEvent.MOUSE_DOWN, clickToDrag);
  movieClip_2.addEventListener (MouseEvent.MOUSE_DOWN, clickToDrag);
  movieClip_3.addEventListener (MouseEvent.MOUSE_DOWN, clickToDrag);
  movieClip_1.addEventListener (MouseEvent.MOUSE_UP, releaseToDrop);
  movieClip_2.addEventListener (MouseEvent.MOUSE_UP, releaseToDrop);
  movieClip_3.addEventListener (MouseEvent.MOUSE_UP, releaseToDrop);

  
  

  function clickToDrag(event:MouseEvent):void
  {
  selectedMC = MovieClip (event.currentTarget);
  selectedMC.startDrag ();
  }

  function releaseToDrop(event:MouseEvent):void
  {
  event.currentTarget.stopDrag ();
  }

  stage.addEventListener (KeyboardEvent.KEY_DOWN, nextQuestion);

  function nextQuestion(event:KeyboardEvent):void {}
  trace (Event.keycode);
  if(Event.keycode == Keyboard.Right)
  {
  selectedMC.rotation += 5;
  }
  
  if(Event.keycode == Keyboard.Left)
  {
  selectedMC.rotation-= 5;
  }
  }

  It is not a conflict, but it's a waste of code because they are both the same thing.  The first with the right loop is more effective in terms of coding and will make life easier for you because you only need to adjust the numObjects value to have it include more.

  You just need to assign instance names for the rest of your objects in the same way... movieClip_ # code as you (with loop version) should be enough.

• Can I drag and drop files from my Mac in the time Capsule to free up space on my Mac?

  I currently use my Time Capsule in sync with Time Machine as a return "where" upward... I would like to know if I can drag and drop files to transport CANADA to free up space on my Mac.

  I would like to know if I can drag and drop files to transport CANADA to free up space on my Mac.

  Yes, but the fact that you can do something does not suggest that it would be wise to do. Please take a minute to think about it per.

  If you delete files on your Mac for free space and move them to the TC... so that only one copy of these files you will be on the TC.  What will happen to the files when... not if... you have a problem with the TC?

  A plan much better, faster and more secure would be to add a USB to your Mac and move your files there. Then, Time Machine can back up your Mac and the USB attached to your Mac to the TC.  It would be a minimum backup... plan your files 'master' on the USB drive and 'backups' on the TC.

• Drag and drop the element of the array of Clusters

  I have a project that includes an array of 'tests', each of which is a cluster that contains an array of 'numbers', a matching the regular expression string and an array of "tasks" (all of them, is in turn, a group of elements).

  It is:

  • Tests (table of):
  • • Cluster:
    • • Reference numbers (an array of strings)
      • Regex (string)
      • Tasks (table of):
      • • Cluster:
        • • Task type
          • Basic channel,
          • Measuring channel
          • Other channels

  I wish I could drag and drop to rearrange the task table in an individual event.  (It is a nice-to-have rather than a urgent request - more for my own learning that no matter what).  For now, I've implemented "Move up" and "Move down" buttons

  Examples are fine for a single cluster that includes a table or an array of objects.  As soon as we have an array of clusters, it is difficult to access individual items within a specific cluster.

  Who that it be completed can drag and drop into such a facility?

  Curiously,.

  Geoff

  Hello GeoffF,

  It's certainly doable and you can even use the standard start drag and drop methods/events, the trickiest part is to determine the table of the elements that are selected on the mouse towards the top/mouse downwards and the swap of manual handling.  Fortunately, there are a few decent examples of how do this out there already, I suggest you take a look at this one:

  Example of community: determine the Index of the clicked element Array in LabVIEW

  https://decibel.NI.com/content/docs/doc-22434

  That should give you the selected table indexes, and then all you have to do is to move the elements around around the drop event.  I have attached a very basic demonstrative example that uses this code I just linked (you need to download that as well) and the events referred to swap two elements of the array.   The attached code is just thrown together, you'll want to design something more robust and scalable to any sort of actual use.

  Kind regards

• cannot drag and drop a shortcut on the desktop of the address bar.

  I can drag and drop a shortcut to the menu of bookmarks. I can't drag and drop in the menu bookmark on the desktop. I can't drag and drop the address bar on the desktop.

  You drag the text selected in the address bar or the button "Site Identity" (lock/globe)?

• Cannot drag and drop a pattern to the color chart

  I have a PC with Windows 10 so maybe that's part of the problem.

  I've been working with a very detailed model and using the function drag / move in the color chart with no problems.  Then all of a sudden it stopped working.  Any thoughts?  I can drag and drop other items in, but not this model more.  Any thoughts?

  Try and select the object complete, then object > model > done. This can generate a more descriptive error message. Will there be a clipping mask in your work?

• Where HTML5 code indicators are stored in the Configuration file?

  There is a bug in Dreamweaver CS6 where HTML5 code (and perhaps others) indicators stop working when you install ColdFusion 10 for Dreamweaver extensions. If you uninstall the ColdFusion extensions while the HTML5 code indicators work again.

  I want to keep a copy of advice to code HTML5 and then 'paste' returning to after installtion Coldfusion extensions so that Dreamweaver has all the indicators in code, he should have. Why Adobe did not worth to test their software code hinting is beyond me, especially when Coldfusion is one of their own products! But anyway nobody knows where HTML5 code indicators are stored for tags like < header > and < footer >?

  The control of the code hints for the languages based on tags is in a file called C:\Program Files (x 86) \Adobe\Adobe Dreamweaver CS6\configuration\TagLibraries\TagLibraries.vtm. It is in a similar situation on other operating systems.

  However, any changes made to the indicators of code based on tags is loaded from the TagLibraries folder in your personal configuration file (see http://forums.adobe.com/thread/494812 for its situation on different operating systems).

  I suspect that what has happened is that the one that created the extension of code hints ColdFusion 10 added new CF tags to an older version of TagLibraries.vtm. This would explain why the HTML5 code hints disappears. Dreamweaver always uses the version of the TagLibraries.vtm file in your personal configuration file if there is. As soon as you uninstall code CF10 indicators, Dreamweaver deletes your personal configuration file TagLibraries.vtm and to using the default version in the configuration of the main program file.

  Since you are comfortable coding with ColdFusion, you should probably have little difficulty to change the version of the TagLibraries.vtm file in your personal configuration file. Simply copy the first element of to the default TagLibraries.vtm and use it to replace the one created by the expansion CF10. You should then have CF10 both indicators HTML5 to code.

  I'm pretty sure that will fix the problem for you. But you should file a bug report about the extension. The ColdFusion team is completely separated from the DW one, and from what I've heard, they do not communicate much. It should be a trivial matter for the CF team to update their extension.

• Hi, SEND my button has disappeared from my Apple Mail &amp; procedure of customization of the DISPLAY toolbar displays the dialog box with no icon of the button SEND to drag-and - drop on my desk.

  G, day,

  I have an iMac 21 "and use Applemail. However, my mail SEND icon is spent on the missing list and raise VIEW / 'Customize toolbar' does not contain the icon SEND so that I could drag-and - drop to the right / top corner where it should belong. Any help would be welcome.

  PS My incoming mail has also stopped. Moderate P.C. Savvy.

  Kind regards.

  Alan B.

  The button send when you are working in a new message or a reply. It is not in the view of the overall message.

  Missing when you create a new message or reply to a message?

  

• Firefox bookmarks bar does not allow me to drag-and - drop Web site icons. I went into the display and click on "bookmarks bar".

  Firefox bookmarks bar does not allow me to drag-and - drop Web site icons. I went into the display and click on "bookmarks bar". bookmarks bar but her but its not allowing me to drag and drop the icon on the toolbar. I tried everything it is supposed to do, but his does not work. his frustration.

  Stef. /. \

  Make sure the toolbars like the toolbar 'Navigation' and the 'personal bar' are visible.

  • View > toolbars
  • Right click on empty toolbar space

  Use the toolbar (Customize) to open the Customize and set the toolbar to display items.

  • Make sure the "bookmarks toolbar items" are on the personal bar
  • If "Bookmarks Toolbar items" is not on the bookmarks toolbar, then FRY it in the palette of the toolbar in the window the bookmarks toolbar Customize
  • If the missing elements are in the toolbar palette then drag them from the window, customize the toolbar
  • If you do not see an item on a toolbar in the toolbar palette and then click the button "Restore default" to restore the default toolbar configuration
  • https://support.Mozilla.org/KB/how+to+customize+the+toolbar
  • https://support.Mozilla.org/KB/back+and+forward+or+other+toolbar+items+are+missing

  You can check the problems caused by a corrupt localstore.rdf file if the above didn't help.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF