Configure Cisco ASA VPN client

Similar Questions

• Cisco AnyConnect VPN Client maintains reconnection

  Hello

  We have recently installed an ASA5505 and activated the VPN access.

  Two of my colleagues have no problems connecting to the VPN using Cisco AnyConnect VPN Client, but I do.

  I am still disconnected after a few seconds with the message:

  "A VPN reconnect gave rise to different configuration settings. VPN network interface is to be reset. Applications using the private network may be required to restart. »

  Cisco AnyConnect VPN Client Version 2.5.2019

  I work with Windows 7 but the same thing happens when I try to connect using my computer that is running Windows Vista.

  My colleagues also using Win7

  I also tried to disable the Windows Firewall.

  Any help would be appreciated.

  Best regards

  Peter

  TAC has been able to solve the problem.   For webvpn mtu changed default from 1406 to 1200.

  Not sure why 2 other ASAs we work very well otherwise though!

  WebVPN
  SVC mtu 1200

• Cisco AnyConnect VPN Client (connection attempt failed because the network or pc problem cisco)

  Hi all

  I am trying to connect to my Cisco AnyConnect VPN Client but everytime I try, I get an error (connection attempt failed because the network or pc problem cisco)

  Can anyone help me please with this.

  Thank you

  Zia

  What is the local firewall on your computer?

• Unable to connect to other remote access (ASA) VPN clients

  Hello

  I have a cisco ASA 5510 appliance configured with remote VPN access

  I can connect all hosts on the INSIDE and DMZ network, but not able to access other clients connected to the same VPN.

  For example, if I have 2 clients connected to the VPN, customer and CustomerB, with a pool of vpn IP addresses such as 10.40.170.160 and 10.40.170.161 respectively, these two clients are not able to communicate with each other.

  Any help is welcome.

  Thanks in advance.

  Hello

  I'm a little rusty on the old format NAT, but would be what I would personally try to configure NAT0 on the 'outer' interface.

  It seems to me that you currently have dynamic PAT configured for the VPN users you have this

  NAT (outside) 1 10.40.170.0 255.255.255.0

  If your traffic is probably corresponding to it.

  The only thing I can think of at the moment would be to configure

  Note of VPN-CLIENT-NAT0-access-list NAT0 for traffic between VPN Clients

  list of access VPN-CLIENT-NAT0 permit ip 10.40.170.0 255.255.255.0 10.40.170.0 255.255.255.0

  NAT (outside) 0-list of access VPN-CLIENT-NAT0

  I don't know if it works. I did not really have to configure it on any ASAs running older software. There was some similar questions here on the forums for the new format.

  -Jouni

• Between Cisco ASA VPN tunnels with VLAN + hairpin.

  I have two Cisco ASA (5520 and 5505) both with version 9.1 (7) with Over VPN and Security Plus licenses. I try to understand all the internet a traffic tunnel strategy VLAN especially on the 5520 above the 5505 for further routing to the internet (such as a hair/u-turn hairpin). A few warnings:

  1. The 5505 has a dynamically assigned internet address.
  2. The 5505 has sometimes no device turned on behind her, bringing interfaces down to the inside (which can cause problems from site to site).
  3. The 5520 cannot be a client of ezvpn due to its current role as a server of webvpn (anyconnect).

  Let me know if I need to post my current config. Basically, I'm starting from scratch after several attempts.

  Thank you!

  1. The 5505 has a dynamically assigned internet address.

  You can use the following doc to set up the VPN and then this document to configure Hairping/U tuning

  2. the 5505 has sometimes no device turned on behind her, bringing interfaces down to the inside (which can cause problems from site to site).

  Make sure that the interface is connected to a switch so that it remains all the TIME.

  3. 5520 the may not be a ezvpn customer due to she has current as one role anyconnect webvpn ()) server.

  You can use dynamic VPN with normal static rather EZVPN tunnel.

  Kind regards
  Dinesh Moudgil

  PS Please rate helpful messages.

• Router Cisco IPsec VPN client

  Hello

  I would like if it is possible to make the IPsec VPN connection as a customer.

  ISP router (VDSL connection)

  <--->Cisco 887 <---->pc more with conditional redirection

  VPN router (as strongVPN)

  Thank you for your help.

  Best regards

  Hi Bruno.

  Yes the IOS router may be a VPN client, it is called easy VPN:

  How to configure Easy VPN Cisco IOS (server and client)

  * The server must be a Cisco device such as another router or an ASA.

  Keep me posted.

  Thank you.

  Portu.

  Please note all useful messages.

• the Cisco asa vpn processing error payload: payload ID: 1

  Hello

  I set up vpn L2TP by using ASDM and now I am not able to connect my Cisco ASA 5505.

  It is showing the error message

  3

  July 7, 2011

  18:57:38

  IP = *. *. *. *, payload processing error: ID payload: 1

  Please suggest me how to solve this problem (by using ASDM)

  Thank you

  Hi Nikhil,

  Your config seems incomplete, command 'IPSec l2tp ipsec vpn-tunnel-Protocol' is missing, what is needed to connect L2tp try to reconfigure your firewall using the link:-

  http://www.Cisco.com/en/us/customer/docs/security/ASA/asa80/configuration/guide/l2tp_ips.html

  Hope this helps,

  Parminder Sian

• Cisco ASA: Vpn SiteToSote with a backup VPN

  Hi all

  A partner have two VPN gateway. We have a connection on one of them, but we want to set up another tunnel for backup (if the first gateway goes down).

  How can I configure my ASA to only create a tunnel with a counterpart if approves it first failure?

  Thanks for the reply

  You can use multiple addresses peer in your map of cryto for example.

  card crypto mymap 10 set by peer

  Your ASA will use try in the order that they are entered, check out this link for more details.

  http://www.Cisco.com/en/us/docs/security/ASA/asa72/command/reference/c5_72.html#wp2066090

  Jon

• Cisco ASA VPN session reflect a public IP of different source

  Hi all

  I tested and managed to successfully establish the vpn on my cisco asa 5520.

  On my syslog, I can see "parent anyconnect session has begun" during my setting up vpn and "webvpn session is over" at the end of my vpn session

  where public ip used to establish the vpn address is reflected. However after the line "webvpn session is over", I can see other lines in my syslog example "group = vpngroup, username = test, ip = x.x.x.x, disconnected session, session type: anyconnect parent, duration 0 h: 00m23s, xmt bytes: 0, rcv:0 bytes, reason: requested user" where x.x.x.x is not the ip address used to establish my vpn for remote access, it is not related to my vpn ip address below. I am very sure that the x.x.x.x ip failed any vpn for my cisco asa5520. So why it is reflected in my logs to asa cisco? Pls advise, TIA!

  Hello

  Think I remember some display on a similar question in the past. Did some research on google and the next BugID was mentioned in the discussion.

  113019 syslog reports an invalid address when the VPN client disconnects.
  CSCub72545
   

  Description

• Configuration Cisco ASA to shoot the AD user accounts

  I am trying to configure my asa cisco to authenticate with my ad instead of local accounts.  I followed the instructions at http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00808c3c45.shtml and when I test the server in the AAA server group (which is my windows AD server, I get a successful connection.)  However, when I connect the ssl site for my cisco vpn, it continues not to accept connections active directory, only local.  is there somewhere else I need to tie the aaa server groups?  What should I do?

  Hi Neal,

  Great to hear that, 5 points for the answer, now please mark it as answered so future users can learn from this problem and the answer.

  Kind regards

• ASA vpn client

  Hello world

  I would like to ask for help in order to correct a customer vpn tunnel. I'm not familiar with the AAS, so please do not laugh if I write something stupid

  So I inherit one asa, which has two interface used physical and vlan more. Outdoors, office, management and management. I use my computer on the vlan management, and I can reach the computers on the desktop (192.168.12.0/24) and the branch (192.168.10.0/24). I would realize that I connect to thrught houses a vpn, and I should reach the 12.x and 10.x network as I was in these networks (due to the microsoft allowed wirewall to the local network traffic).

  I inherited a vpn configuration which I added my user.

  I'm trying to cite only the relevant portion of config:

  SSH 192.168.99.0 255.255.255.0 management

  access extensive list ip 192.168.99.0 nonat_management allow 255.255.255.0 192.168.99.0 255.255.255.0

  access extensive list ip 192.168.99.0 nat_management_branch allow 255.255.255.0 192.168.10.0 255.255.255.0
  access extensive list ip 192.168.99.0 nat_management_office allow 255.255.255.0 192.168.12.0 255.255.255.0

  IP local pool ippool 192.168.99.100 - 192.168.99.200

  NAT-control
  Global 1 interface (outside)

  NAT (management) - access list 0 nonat_management
  nat_management_office list of access 5 NAT (management)
  nat_management_branch list of Access 10 NAT (management)

  192.168.99.50 management - dhcpd addresses 192.168.99.79
  enable dhcpd management

  L2TP strategy of Group internal
  monty password username * == encrypted nt
  monty username attributes
  Protocol-tunnel-VPN l2tp ipsec
  VPN-framed-ip-address 192.168.99.99 255.255.255.0
  attributes global-tunnel-group DefaultRAGroup
  ippool address pool
  Group Policy - by default-l2tp
  IPSec-attributes tunnel-group DefaultRAGroup
  pre-shared key *.
  tunnel-group DefaultRAGroup ppp-attributes
  ms-chap-v2 authentication

  I quote the encryption settings, because I can connect to asa, I think that I have problems with the nat or access rules.

  I have an ip local pool 192.168.99.100 - 192.168.99.200, but I have the fixed ip with the vpn-framed-ip-address 192.168.99.99 255.255.255.0

  Happened when I connect and try to reach the following computers:

  I can reach only a freenas 192.168.12.2, and I see in his journal that I have connected with 192.168.99.99 (vpn-framed-ip-address)

  I can't reach the computers on networks, however I have two nat rules, working when I'm in the office network 99.0

  access extensive list ip 192.168.99.0 nat_management_branch allow 255.255.255.0 192.168.10.0 255.255.255.0
  access extensive list ip 192.168.99.0 nat_management_office allow 255.255.255.0 192.168.12.0 255.255.255.0

  It seems that these two nat rules do not work with my vpn client.

  And it is very important to arrive at the asa with ssh through the tunnel, but I can't.

  I don't know if that is the ip address of the vpn client is in the management network, perhaps one should change to another network:

  for example 192.168.95.0/24

  A vpn asa for Dummies or any help is appreciated.

  Thank you very much

  Hi Chris,

  The following should help:

  access-list allowed 192.168.12.0 nonat_office 255.255.255.0 192.168.90.0 255.255.255.0

  In this way, returning office subnet pool VPN traffic is exempt from nat. And so you will not get the failure of RPF checking.

  In addition, you must change this:

  nat_vpn_office to access extended list ip 10.10.10.0 allow 255.255.255.0 192.168.12.0 255.255.255.0

  (incoming traffic on the VPN remote access would come from the VPN pool.) Not your home network.)

  You must have:

  No nat_vpn_office access list extended ip 10.10.10.0 allow 255.255.255.0 192.168.12.0 255.255.255.0

  access extensive list ip 192.168.90.0 nat_vpn_office allow 255.255.255.0 192.168.12.0 255.255.255.0

  NAT (outside) 5 nat_vpn_office list of outdoor access

  Hope this helps, and sorry for the delay.

  -Shrikant

  P.S.: Please check the question as answered if it was resolved. Do rates all useful messages. Thank you.

• ASA VPN clients

  I couldn't find the answer to this in google.

  You have to use the anyconnect software or you can use other as openvpn client software to connect to your asa.

  If it is for home, ASAs all equipped with 2 free licenses of AnyConnect Premium.

  You can even set up a VPN SSL without client using those and does not any client software - a simple browser.

  Purchase price for a small number of licenses AnyConnect is very cheap indeed.

  You can use generic third-party clients for IPsec VPN IKEv1 (not for the SSL VPN client-oriented).

• Cisco Anyconnect VPN client cannot establish a connection.

  Hello

  I am trying to connect to my server license from the University. I use 'Cisco Anyconnect VPN', but when it is goinh to initialize the connection it gives me the error "unable to establish a connection to the VPN client. At this point, the network of my Cisco anyconnect adapter gets disable automatically.

  I have no antivirus, and also it happens even when I turn off my firewall.

  Please help me solve this problem that prevents me from my all of the work!

  Thank you in advance.

  In addition to the advice of John I would also look at this document from Cisco for possible help...

  http://www.Cisco.com/image/gif/paws/100597/AnyConnect-VPN-Troubleshooting.PDF

  Cisco help as much as possible...

  http://www.Cisco.com/en/us/products/ps8411/tsd_products_support_series_home.html

  Its also possible you may have to run or reinstall the Cisco client in compatibility mode, if they do not have a version of Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/help/compatibility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-program-compatibility-Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Otherwise contact your university network administrators may also be a viable option.

  MS - MVP Windows Expert - consumer
  "When all else fails try what the captain suggested before you started...". »

• RV180 and Cisco IPSec VPN client

  Hi NetPro,

  RV180 router supports VPN client using the regular Cisco VPN client connections?

  Data sheet says it works with client QuickVPN. If the regular non-Quick client is not supported, both clients can coexist (= be installed simultaneously) on the same PC?

  Is supported customer QuickVPN split tunneling?

  Thank you!

  Lubomir

  Lubomir Hello,

  The RV180 currently supports QuickVPN and PPTP VPN connections. It also has the IPSec tunnel as well, but it does not support the Cisco VPN client.

  I saw a question have Cisco VPN and the QuickVPN installed on the same computer.

  The QuickVPN client supports only split tunneling.

  I hope that answers your questions.

• Client SSL VPN Cisco or Cisco AnyConnect VPN Client

  Hello

  Maybe a simple question...

  What is the main difference in this two customers?

  That's when the AnyConnect Client preferred?

  Hope someone can help clearing this out for me.

  Best regards

  Johan

  The SSL VPN client is the legacy client used on the first ASA platforms and VPN concentrator. Customer SVC has since been replaced by AnyConnect. AnyConnect is the client recommended for new deployments ASA and IOS. AnyConnect is also the only client that supports 64-bit operating systems.